Public Folders not visible in outlook 2010 for some

Migrated exchange 2007 to 2013. I know Public Folders are a mailbox now.
My question is why do some users with outlook 2010 see the Public Folders under "Tasks" on the left vertical bottom of outlook with "Folder List" highlighted and other DON'T -They just don't see anything under "Tasks" on the
left vertical bottom of outlook with "Folder List" highlighted
Also (in a newly created email) if they go to the address book drop down click on Public Folders entry its empty.
any help would be appreciated
RJM

Hi RJM,
Except above links, I also recommend you refer to the following article to migrate the PF from exchange 2007 to 2013:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-4-step-by-step-exchange-2007-to-2013-migration.aspx
Check the status
Once the migration reached the AutoSuspended state as shown below, proceed to the next steps, otherwise you must wait as this may take some time based on your PF size.
Get-PublicFolderMigrationRequest | Get-PublicFolderMigrationRequestStatistics
Lock Down PF for Migration (Down time is required, as during this phase PF will bot be accessible for all users)
Set-OrganizationConfig -PublicFoldersLockedForMigration:$true
Set-PublicFolderMigrationRequest -Identity \PublicFolderMigration -PreventCompletion:$false    
Resume-PublicFolderMigrationRequest -Identity \PublicFolderMigration
Test and Unlock the PF Migration
I will configure a test user to use the new PF using the following command:
Set-Mailbox -Identity mohsaeed -DefaultPublicFolderMailbox mailbox1
Open the test user mailbox and run some tests: Create new post, view old posts, check permissions
If all tests passed successful proceed to next step.
Get-Mailbox -PublicFolder | Set-Mailbox -PublicFolder -IsExcludedFromServingHierarchy $false    
Set-OrganizationConfig -PublicFolderMigrationComplete:$true
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Similar Messages

  • I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook.  ICloud syncs to my iphone fine both ways.

    I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar.  They have stopped syncing...mostly.
    Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine.  But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar.  If I reboot the computer, the iCloud data shows up.
    Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
    All syncing works with my iPhone.
    I have signed out of iCloud on PC.  I have stopped syncing and re-started.  No change.
    I have an .aplzod folder for iCloud.  I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
    Any help would be appreciated.  Curious that Outlook will upload to iCloud but not receive downloads unless I reboot.  However, rebooting does not download the missing Contacts.
    Jim Robbins

    Hi Jim!
    You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
    Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
    If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
    When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
    Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
    Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
    Completely close and reopen the iCloud Control Panel.
    If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
    Turn iCloud Calendar off and back on:
    Close Outlook.
    Open the Windows Control Panel:
    In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
    In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
    Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
    Open Outlook and test to see if the issue has been resolved.
    Ensure the iCloud Outlook Add-in is active within Outlook.
    Outlook 2010:
    Open Outlook 2010.
    Click the File menu.
    Click Options in the left panel of the Outlook window.
    Click Add-Ins in the left panel of the Outlook Options window.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
    Open Outlook 2007.
    From the Tools menu, choose Trust Center.
    Select Add-ins from the left column.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I purchased a new Windows 8 PC. I have used and continue to use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar sinked properly with my Iphone 5. Now with the new Windows 8 PC, it does not. Help!

    I purchased a new Windows 8 PC and I use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar would sync with my Iphone 5, but with the new Windows 8 PC and Outlook 2010, it does not, and I can't figure out how to snyc them. The emails from Outlook 2010 sync, but the calendar does not. Help! Thanks. 

    Easy solution for restoring lost calendar informaiton, thank goodness.  On your iPhone, go to settings, then to iCloud.  If your Calendar selection is turned off,  turn it on.  Your info should restore.  If your Calendar selection is turned on, then turn it off.  Choose to save calendars when asked.  After it shuts the Calendar off, turn it back on.  Your info should be restored.
    Thank you to Apple support for walking me through this.  Shame on you Apple for not just telling people about this easy fix rather than making us go through all of this pain and worry.
    - JT

  • Mail-enabled Public Folders not showing as enabled in PFMC or EMS

    Good morning
    I have some PF's that are mail enabled, but running the Get-PublicFolder cmdlet shows "mailenabled" attribute as False. Also, in the PF Management Console, the folder shows as not mail enabled (with an option to enable it).
    I found this thread that seems to be related:
    http://social.technet.microsoft.com/Forums/exchange/en-US/918aad03-c96f-4023-89cc-ec2c66e51b93/mailenabled-public-folders-not-showing-as-mailenabled?forum=exchangesvrgenerallegacy
    I'd like to do some testing, but recreating this issue with a test PF is actually really hard.
    Does anyone know a way to force that "mailenabled" attribute to False after mail-enabling a PF? I can't find any ADSI attribute that is obvious. I changed MsExchRecipientTypeDetails to <not set> but that didn't do it...
    **UPDATE** I just found out that msExchMailboxGuid is missing from that object. Does anyone have any kind of suggestion for how I can find the Guid of the mailbox that is no longer associated with this PF?
    **UPDATE 2** I have found other PF's that are missing this attribute, but they are not displaying any symptoms. They are showing as mail enabled in the EMS and PFMC. So I guess this isn't a required attribute.
    Could anyone explain the purpose of this attribute for mail-enabled public folders? I just assumed it was required.
    Thanks!

    Hi,
    Do you migrate these mail-enabled public folders from previous Exchange server to Exchange 2010?
    Please check if you can see the SMTP address for mail-enabled public folders via Properties of Public folders.
    Please check if they show in the Microsoft Exchange System Objects in ADUC.
    Besides, I recommend you mail disable the public folder and then mail enable it again to check the result in the Public Folder Management Console.
    For a mail-enabled recipient, a minimum set of attributes is required to make all Exchange components work properly. For example, a mail-enabled entry (a user, contact, group, or public folder) has to have at least these attributes: mailNickname, legacyExchangeDN,
    and displayName. Without the mailNickname attribute, an object is not considered mail-enabled.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel.

    I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel.  Also the datafile share which ends in .aplzod is not created in Outlook.  The Contacts and Calendar are sent to iCloud (verified on iCloud.com) but the iCloud folders are not created in Outlook in the Contacts and Calendar navigation panes.   I get a message toward the end of the sync process indicating that there was an unspecified error.  I'm using the newest version of the iCloud Control Panel, the 32 bit version of Outlook 2010, Windows 7 64 bit, an iPhone 3GS, and the latest version of iTunes.  Any ideas how to complete the sync process to the end?

    Pretty much the same for me: Windows 7 64-bit, Outlook 2010, iCloud Control Panel 1.0.1, iPhone 3GS.  Error report at end of setup process is shown below, and has been emailed.  Any help please?
    Your setup couldn't be started because of an unexpected error.
    Error: 0x8004010F: ZebraBootstrap::ActivateDataFile: Could not create msgservice
    AppleOutlookDAVConfig version: 3.0.42.0
    Windows version (6.1.7601): Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit Local app data directory test: Pass Temp directory test: Pass Outlook version: 14 (14.0.6025.1000), x86 Outlook location (installed): C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE MAPI location: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
    MAPI logon succeeded
    Message Stores Table:
      Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
      Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
      Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
    Contents of C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
    <Not found>
    Contents of C:\Windows\system32\mapisvc.inf
    [Services]
    MSFAX XP=Fax Mail Transport
    [Default Services]
    MSFAX XP=Fax Mail Transport
    [MSFAX XPP]
    PR_PROVIDER_DLL_NAME=FXSXP.DLL
    PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
    PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
    PR_DISPLAY_NAME=Fax Mail Transport
    PR_PROVIDER_DISPLAY=Fax Mail Transport
    [MSFAX XP]
    PR_DISPLAY_NAME=Fax Mail Transport
    Providers=MSFAX XPP
    PR_SERVICE_DLL_NAME=FXSXP.DLL
    PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
    PR_SERVICE_ENTRY_NAME=ServiceEntry
    PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
    HKLM\Software\Microsoft\Office\14.0\Access\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\OneNote\Outlook Add-in
      Message Classes
    HKLM\Software\Microsoft\Office\14.0\Outlook
      Dataviz
      InstallRoot
      Namespaces
        {0006F017-0000-0000-C000-000000000046}
          FolderTypes
            {00067800-0000-0000-C000-000000000046}
            {00067801-0000-0000-C000-000000000046}
            {00067802-0000-0000-C000-000000000046}
            {00067803-0000-0000-C000-000000000046}
            {00067804-0000-0000-C000-000000000046}
            {00067808-0000-0000-C000-000000000046}
            {00067828-0000-0000-C000-000000000046}
            {00067829-0000-0000-C000-000000000046}
            {0006782A-0000-0000-C000-000000000046}
          ViewTypes
            {00062000-0000-0000-C000-000000000046}
            {00062001-0000-0000-C000-000000000046}
            {00062002-0000-0000-C000-000000000046}
            {00062003-0000-0000-C000-000000000046}
            {00062004-0000-0000-C000-000000000046}
        {0006F018-0000-0000-C000-000000000046}
          FolderTypes
            {00067820-0000-0000-C000-000000000046}
            {00067821-0000-0000-C000-000000000046}
            {00067822-0000-0000-C000-000000000046}
            {00067823-0000-0000-C000-000000000046}
          ViewTypes
            {00062000-0000-0000-C000-000000000046}
            {00062001-0000-0000-C000-000000000046}
            {00062002-0000-0000-C000-000000000046}
            {00062003-0000-0000-C000-000000000046}
            {00062004-0000-0000-C000-000000000046}
      Operations
        1ImportFile
        2ExportFile
        3ExportDataLink
        4ImportVCard
        5ImportAccounts
        6ImportVcalendar
        7ImportRss
        8ExportRss
        9ImportCFL
        ImportEudora
      SchedulingInformation
        FreeBusySupport
      SearchTypes
        {00067A00-0000-0000-C000-000000000046}
        {00067A01-0000-0000-C000-000000000046}
        {00067A02-0000-0000-C000-000000000046}
        {00067A03-0000-0000-C000-000000000046}
        {00067A04-0000-0000-C000-000000000046}
        {00067A08-0000-0000-C000-000000000046}
        {00067A10-0000-0000-C000-000000000046}
        {00067A11-0000-0000-C000-000000000046}
        {00067A20-0000-0000-C000-000000000046}
      Setup
      UpgradePath
    HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Office\Outlook
      Addins
        AccessAddin.DC
    HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Shared Tools\Outlook
      Journaling
        Microsoft Access
    HKLM\Software\Microsoft\Office\14.0\User Settings\Excel_Core\Create\Software\Microsoft\Shared Tools\Outlook
      Journaling
        Microsoft Excel
    HKLM\Software\Microsoft\Office\14.0\User Settings\Misc_SpsOutlookAddin\Create\Software\Microsoft\Office\Outlook
      Addins
        ColleagueImport.ColleagueImportAddin
    HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover
      Create
        Software
          Microsoft
            Office
              14.0
                Outlook
                  AutoDiscover
    HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Core
      Create
        Software
          Microsoft
            Internet Mail and News
              Mail
            MSDAIPP
            Shared Tools
              Outlook
                Journaling
                  Conversation
                  Document
                  E-mail Message
                  Fax
                  Letter
                  Meeting
                  Meeting Cancellation
                  Meeting Request
                  Meeting Response
                  Note
                  Phone Call
                  Remote Session
                  Task
                  Task Request
                  Task Response
            Web Service Providers
              FreeBusy
                office.microsoft.com
            Windows
              CurrentVersion
                Internet Settings
                  TemplatePolicies
                    High
                  Zones
                    4
    HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg
      Create
        Software
          Microsoft
            Windows
              Shell
                Associations
                  UrlAssociations
                    mapi
                      UserChoice
    HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
    HKLM\Software\Microsoft\Office\14.0\User Settings\PowerPoint_Core\Create\Software\Microsoft\Shared Tools\Outlook
      Journaling
        Microsoft PowerPoint
    HKLM\Software\Microsoft\Office\14.0\User Settings\Word_Core\Create\Software\Microsoft\Shared Tools\Outlook
      Journaling
        Microsoft Word
    HKLM\Software\Microsoft\Office\8.0\Outlook
    HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.msi
    HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.xml
    HKLM\Software\Microsoft\Office\Outlook
      Addins
        Apple.DAV.Addin
        BCSAddin.Connect
        Groove.OutlookProxyAddIn
        Microsoft.VbaAddinForOutlook.1
        OneNote.OutlookAddin
        OscAddin.Connect
        OutlookChangeNotifier.Connect
        Search.OutlookToolbar
        UmOutlookAddin.FormRegionAddin
      AutoConfigDomains
        hotmail.*
        live.be
        LIVE.CA
        LIVE.CL
        LIVE.CN
        LIVE.CO.IN
        LIVE.CO.KR
        LIVE.CO.UK
        LIVE.CO.ZA
        LIVE.COM
        LIVE.COM.AR
        LIVE.COM.AU
        LIVE.COM.MX
        LIVE.COM.MY
        LIVE.COM.PE
        LIVE.COM.PK
        LIVE.COM.PT
        LIVE.COM.SG
        LIVE.COM.VE
        LIVE.DE
        LIVE.DK
        LIVE.FR
        LIVE.HK
        LIVE.IE
        live.in
        LIVE.IT
        LIVE.JP
        LIVE.MA
        LIVE.NL
        LIVE.NO
        LIVE.PH
        LIVE.RU
        LIVE.SE
        livemail.com.br
        msn.*
        msnhotmail.com
        tw.live.com
        windowslive.com
      FormRegions
        IPM.Note.Microsoft.Exchange.Fax.UM.CA
        IPM.Note.Microsoft.Exchange.Voice
        IPM.Note.Microsoft.Exchange.Voice.UM
        IPM.Note.Microsoft.Exchange.Voice.UM.CA
        IPM.Note.Microsoft.Fax.CA
        IPM.Note.Microsoft.Voicemail
        IPM.Note.Microsoft.Voicemail.UM
        IPM.Note.Microsoft.Voicemail.UM.CA
        IPM.Note.Rpmsg.Microsoft.Voicemail.UM
        IPM.Note.Rpmsg.Microsoft.Voicemail.UM.CA
      Outlook 10 Accounts
        Categories
          {ED475418-B0D6-11D2-8C3B-00104B2A6676}
          {ED475419-B0D6-11D2-8C3B-00104B2A6676}
          {ED475420-B0D6-11D2-8C3B-00104B2A6676}
        Types
          {4DB5CBF0-3B77-4852-BC8E-BB81908861F3}
          {ED475411-B0D6-11D2-8C3B-00104B2A6676}
          {ED475412-B0D6-11D2-8C3B-00104B2A6676}
          {ED475414-B0D6-11D2-8C3B-00104B2A6676}
      SocialConnector
        SocialProviders
          OscAddin.SharePointProvider
    HKCU\Software\Microsoft\Office\14.0\Common\HelpViewer\Applications\OUTLOOK
      AdditionalCollections
        0
        1033
    HKCU\Software\Microsoft\Office\14.0\Common\Migration\Outlook
    HKCU\Software\Microsoft\Office\14.0\Outlook
      Addins
      AutoDiscover
        RedirectServers
      Display Types
        Balloons
      Journal
      Message
      Office Explorer
      Options
        Calendar
        MSHTML
          International
        ToDoBar
      Perf
        RoamingStreamsCache
          6BF937902986EF42A5D2882B309351BF
      Preferences
      Resiliency
        DisabledItems
      Search
        Catalog
      Setup
      SQM
      Today
        Folders
      UserInfo
    HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Core HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
    HKCU\Software\Microsoft\Office\8.0\Outlook
    HKCU\Software\Microsoft\Office\Outlook
      Addins
        AccessAddin.DC
        ColleagueImport.ColleagueImportAddin
        iTunesAddIn.CalendarHelper
      OMI Account Manager
      SocialConnector

  • In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

    In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
    2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
    <contextMenu idMso="ContextMenuFlaggedContactItem">
     <splitButton idMso="DialMenu">
              <menu>
                <dynamicMenu id="CallContactwithFreedomvoice
    " label="CallContactwithFreedomvoice" 
                            getContent="OnGetContenttest"                           insertAfterMso="Call"/> 
            </menu>       </splitButton>    </contextMenu> 

    Hi Narasimha prasad2,
    Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
    I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to add account to Outlook 2010 for email address under custom domain

    I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
    Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
    Details:
    I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
    Created custom MX record
    Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
    I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
    When I try to add either account to Outlook 2010, I get a popup box with this information:
    Title: "Windows Security"
    Connecting to [email protected]
    [[email protected]]
    [ ] Remember my credentials
                                       [   OK   ]  [  Cancel 
    The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
    "An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
    Clicking Next results in an error message:
    "Problem Connecting to Server"
    I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
    <?xml version="1.0" encoding="utf-8"?>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
    <children>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
    <children>
    <testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
    <children />
    </testresult>
    <testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&amp;v=ExRCA.1&amp;id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.&#xD;&#xA;" elapsedMilliseconds="21035">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
    <children />
    </testresult>
    <testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&amp;v=ExRCA.1&amp;id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.&#xD;&#xA;" elapsedMilliseconds="4605">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml&#xD;&#xA;&#xD;&#xA;HTTP Response Headers:&#xD;&#xA;Connection: close&#xD;&#xA;Pragma: no-cache&#xD;&#xA;Cache-Control: no-cache&#xD;&#xA;Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml&#xD;&#xA;" elapsedMilliseconds="45">
    <children />
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
    <children />
    </testresult>
    <testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
    <children />
    </testresult>
    <testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
    <children />
    </testresult>
    <testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the &quot;Update Root Certificates&quot; feature isn't enabled." elapsedMilliseconds="4">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
    <children />
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
    <children>
    <testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).&#xD;&#xA;Headers received:&#xD;&#xA;RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c&#xD;&#xA;X-DiagInfo: CH1PRD0910CA013&#xD;&#xA;Content-Length: 0&#xD;&#xA;Cache-Control: private&#xD;&#xA;Date: Mon, 31 Mar 2014 04:57:26 GMT&#xD;&#xA;Server: Microsoft-IIS/7.5&#xD;&#xA;WWW-Authenticate: Basic Realm=&quot;&quot;&#xD;&#xA;X-AspNet-Version: 2.0.50727&#xD;&#xA;X-Powered-By: ASP.NET&#xD;&#xA;&#xD;&#xA;&#xD;&#xA;HTTP Response Headers:&#xD;&#xA;RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c&#xD;&#xA;X-DiagInfo: CH1PRD0910CA013&#xD;&#xA;Content-Length: 0&#xD;&#xA;Cache-Control: private&#xD;&#xA;Date: Mon, 31 Mar 2014 04:57:26 GMT&#xD;&#xA;Server: Microsoft-IIS/7.5&#xD;&#xA;WWW-Authenticate: Basic Realm=&quot;&quot;&#xD;&#xA;X-AspNet-Version: 2.0.50727&#xD;&#xA;X-Powered-By: ASP.NET&#xD;&#xA;" elapsedMilliseconds="12691">
    <children />
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>

    Hi,
    Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help:<cite class="_Vc">https://domains.live.com/support/
    </cite>
    Thanks for your understanding in advance.
    Best regards,
    Angela Shi
    TechNet Community Support

  • IPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones

    Problem: iPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones. Contacts synch fine. Was no problem in the past until...
    Sorry for the length. Trying to give all info I can.
    Summary: Had to get motherboard fixed under factory warranty which included new hard drive, and reinstall everything on an HP DV7 laptop. So this is a clean installation of everything on the laptop (Win7). Configuring iTunes and Outlook 2010 for two iPhone 4S users (myself and wife) was my last step. Re-established each user account to iTunes. Calendar synch problem popped up on one of two iPhones that did not exist before.
    Prior history: all synchs worked great prior to the clean install and I never had a problem.
    Config: Windows 7, two iPhone 4S, Week Calendar apps on both. All software up-to-date on iPhones and Win7 (fanatic about that). Had OL2010 PST datafile backups and simply used them for the OL re-installs. OL2010 makes that easy. Each user has their own Win7 login to keep our stuff separate. Of course, OL has Calendar as part of its install.
    Week Calendar apps on both are configured with same calendars (Calendar, Home, My Birthdays, Work). Verified each iPhone Calendars app, Calendar button: From My PC listing has all these checked: All From My PC, Calendar, Home, My Birthdays, Work; Other: Birthdays.
    Difference: In using iTunes to synch, iTunes said the iPhone account was different from the OL account and asked to merge or replace. Apparently this is normal for iTunes on a new install (since basically it is) synching to prior synched stuff.
    iTunes settings for both: Connect iPhone for each user and checked INFO settings for Contacts and Calendars.I used “selected calendars” and verified. Each user has all four calendars checked.
    NOTE: Prior to each users first synch below, neither user had anything in OL2010 Calendar. Can't blame on recurring events problems in OL. ALL the events are on the iPhones and are being synched TO the PC to populate OL2010 Calendars.
    Additional Note: Contacts was already loaded into OL from my backups so synching has no problem.
    User 1 iPhone: Success 1st try.
    In iTunes, selected “merge info” instead of replace.
    Results: User 1 synched fine from iTunes to OL2010 including the 4 Calendars (Calendar, Home, My Birthdays, Work). 4 calendars showed up. No problems at all. Wonderful! expected behavoir.
    User 2 iPhone: Still failing to synch.
    In iTunes, selected “replace” instead of merge info. Apple’s dialog is incredibly confusing and non-explicit on what copies to what and what it does.
    Results: User 2 synched fine from iTunes to OL2010 for Contacts. DID NOT synch the 4 Calendars (Calendar, Home, My Birthdays, Work). Only calendar that shows up in OL is Calendar and it doesn’t contain any data. iTunes has no errors and the synch status bar indicates everything went fine.
    Tried: I deleted the PST files and copied the backup files back to OL to start over. ITUNES no longer gives me the merge info versus replace option. I’ve synched multiple times but the calendar data will not synch.
    Not Tried: Creating the same remaining named calendars (Home, My Birthdays, Work) in OL and trying again.
    ALL suggestions is greatly appreciated.

    Ok, new info. This gets better and better.
    In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
    When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
    Expanding it showed the unchecked missing calendars. I checked them and synched again.
    WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
    I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
    Is there any way to get her files back from before this synch?
    Is there no way to save data files off the iPhone w/o iTunes?
    Why doesn't iTunes let you control the direction of data transfer?
    I now have one very ****** off wife.

  • "From" presence not displaying in Outlook 2010

    I've been working on a software product aiming presence and im integration with Microsoft Outlook using IMessenger API.
    Integration works as expected with Outlook 2013. However, the presence indicator of the
    "from" or sender does not display in Outlook 2010. The to, cc and bcc fields all display presence properly. In Outlook 2013 however, all of the from, to, cc and bcc fields display presence.
    There is a similar discussion for Outlook 2013 on:
    http://social.technet.microsoft.com/Forums/office/en-US/a2500fec-fc3f-4295-bbe3-7620876a2d24/from-presence-not-displaying-in-outlook-2013
    My problem is similar to this one except that I've the same problem with Outlook 2010 and I don't have this problem with Outlook 2013. It may be resolved in Outlook 2013 with a hotfix I don't know. Does anybody have the same issue and have a fix or workaround
    for this situation? I have latest updates for Office 2010 already.
    A strange thing is that when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 1, presence indicators are disappear from contact names as expected, however when I hover over the sender it
    displays sender's presence correctly on tooltip. So integration seems ok when I look at this.
    when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 2, presence indicators are disappear from both contact names and tool tips as expected.
    when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 0, presence indicators are appear for contacts in to, cc, and bcc fields except "from" field, which is quite strange. After
    I move around between messages, some of the sender's presence indicators starts displaying.
    Does anybody know why the presence indicator is not displaying consistently for the "sender" contact in Outlook 2010 when TurnOffPresenceIcon has value 0? Does anybody have the same issue and have a fix or workaround for this situation?

    Hi,
    There is another registry value named TurnOffPresenceIntegration
    which also have an effect on the presence indicator, please find the
    Key in: HKEY_CURRENT_USER\software\microsoft\Office\14.0\Common\IM
    or Policy Key: HKEY_CURRENT_USER\software\Policies\microsoft\Office\14.0\Common\IM
    and then check if the key value is set to 0.
    For more information, please refer:
    http://support.microsoft.com/kb/2726007
    Regards,
    Steve Fan
    TechNet Community Support

  • Acrobat Connect Pro 7.5 will not open MS Outlook 2010

    I have recently updated my OS to Windows 7. Acrobat Connect Pro 7.5 will not open MS Outlook 2010 with the preformatted email message after submitting via the Email Invitations button. MS Internet Explorer 8.0 goes to a blank page. Is there a compatibility issue with Acrobat Connect Pro 7.5, MS Outlook 2010, and/or Windows 7?

    WhOaGRL86 wrote:
    its been running for months, with no problem what so ever
    You were running a non-Intel version on an Intel Mac. You might not have run into problems before but it was only a matter of time. You cannot run an old version and then install brand new versions of ProKit and QuickTime - it will just break.
    So you can either reinstall everything from scratch and then just keep it as it is without ever installing software updates, or you can upgrade to FCP 7. I recommend the latter.

  • Does anyone know how to set alerts in the iCloud calendar of Outlook 2010 for PC?

    Does anyone know how to set alerts in the iCloud calendar on Microsoft Outlook 2010 for a PC?  Outlook gives me a warning message and does not allow me to save alerts for calendar events created in iCloud calendar.  It will allow me to save events in the non-iCloud calendars.

    Ignore what office says, when the warning comes up saying that the reminder will not work click on yes,
    I just tested it and i had the reminder on my ihpone in outlook and also as i had the calendar open in safari it popped up on there too ( I wasn't aware it did that)

  • Online Archive only visible in Outlook 2010 after OWA logon

    Dear.
    We implemented Exchange 2010 native archiving. We created our own retention policies, applied them to the mailboxes and archiving started successfully exactly as we want it.
    We’re using Outlook 2010 clients with both: cached and non-cached mode. The strange thing is that for the online archive to be visible in outlook, the user needs to logon to OWA
     first and only once. Afterwards, online archive stills visible in Outlook 2010.
    Is there any other way to make the online archive visible without forcing the user to do a one-time logon to OWA?
    Thanks for the feedback.
    Regards.
    Peter
    Peter Van Keymeulen, IT Infrastructure Solution Architect, www.edeconsulting.be

    Hi,
    I'm glad you've solved the problem!
    Thanks for you feedback!
    Niko Cheng
    TechNet Community Support

  • Excel files are not opening in outlook 2010.

    excel file is not opening in outlook 2010.
    In outlook the excel attached file if its selected the preview is grayed out. not able to open it.
    wat should be done to resolve it?

    Hi,
    Can you download the attachment to local and open it? Does other types of attachment have this issue?
    Please check the following settings:
    Go to File -> Options -> Trust Center -> Trust Center Settings -> Attachment Handling -> Make sure "Turn off attachment Preview" is not selected -> Click "Attachment and Document Previewers" button -> Make sure "Microsoft
    Excel previewer" is selected -> OK -> OK -> OK.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • IPhone 4 (iOS5) not syncing with outlook 2010 calendar

    Hi Guys,
    My iPhone 4 has been working great for the last few months up until recently.  I have been able to sync with outlook 2010 for both my contacts and calendar using iTunes sync in the past with no problems..  I went to conference last week and got back in the office sync’d yesterday.  Things are not right. My contacts sync, but calendar does not sync either way (phone to PC - PC to phone).  I upgraded to iOS5 and reloaded iTunes and I'm having the same problem.  I also noticed that my sync is taking much, much longer (like there is a conflict somewhere.)   The contacts still sync, but no new/changed calendar entries.  Anyone have this problem and have any ideas how do I can fix it?  Is it a simple setting switch on the iPhone or iTunes?  It's getting very frustrating!!  One of my office mates has been taunting me with his android phone and I’m starting to feel like I might have to do something drastic to get my calendar back on my phone…
    Outlook version is MS Pro Plus 2010 - 14.0.5128.5000 (64-bit)
    iTunes version is 10.5.0.142
    iPhone version is 5.0 (9A334)
    Any help would be greatly appreciated!

    Hey, man. Sorry I have no solution, but it may not hurt to know you are not the only one.
    I uprgraded a 3GS to iOS 5, set it up to sync with iCloud initially, and then switched back to sync with PC as before. It seems that my calendar was syncing at first, but within a few days it just stopped.
    I also recall a ton of weird "sync conflicts" that I had to resolve, even though the iTunes conflict reslover showed information that was identical in Outlook and iPhone calendar.
    Notes and contacts sync just fine with Outlook 2003 under Windows Vista for me, but calendar will not sync at all any more, either direction.
    I have tried most of the suggestions, including restoring iPhone and creating a whole new user account in Windows and tried syncing iPhone and Outlook via iTunes that way (and both USB and wifi). I did not seem to have any better success.
    This is a disaster. So far I have just been using Notes to MANUALLY sync calendar info between devices.
    I have never given nearly as much thought to Android as I have lately.
    It may be time to call Apple Support, but my previous experiences with them (and the "Geniuses" at the store) were underwhelming.

  • Iphone notes are not syncing with outlook 2010

    Hi, my iPhone 4 notes are not synchronize with outlook 2010 in both way. I uninstall my itunes and office and reinstall but still the problem remain. I also check itunes addin in outlook 2010 which is active.  I checked in itunes info tab all setting are correct. I only sync notes with outlook, no email and calendar. One more thing my both programs iTunes and Microsoft office install in D: partition not in C: partition (windows).

    Hey, man. Sorry I have no solution, but it may not hurt to know you are not the only one.
    I uprgraded a 3GS to iOS 5, set it up to sync with iCloud initially, and then switched back to sync with PC as before. It seems that my calendar was syncing at first, but within a few days it just stopped.
    I also recall a ton of weird "sync conflicts" that I had to resolve, even though the iTunes conflict reslover showed information that was identical in Outlook and iPhone calendar.
    Notes and contacts sync just fine with Outlook 2003 under Windows Vista for me, but calendar will not sync at all any more, either direction.
    I have tried most of the suggestions, including restoring iPhone and creating a whole new user account in Windows and tried syncing iPhone and Outlook via iTunes that way (and both USB and wifi). I did not seem to have any better success.
    This is a disaster. So far I have just been using Notes to MANUALLY sync calendar info between devices.
    I have never given nearly as much thought to Android as I have lately.
    It may be time to call Apple Support, but my previous experiences with them (and the "Geniuses" at the store) were underwhelming.

Maybe you are looking for

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site. if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at, http://search.ni.com/query.html?lk=1&col=alldocs&

  • Can print but not scan wirelessly with Cannon MX860

    I have a MacBook Pro (mid 2009) and just upgraded to Mountain Lion this week. Everything seemed to be working fine until I tried to use my scanner. I use the "Open Scanner" interface that comes with OS X as opposed to the Cannon scanner software beca

  • Validate and block vendor master while creating or changing vendor master

    Hi, I need to validate the vendor master country against a ztable which has list of restricted countries and block the vendor       (lfb1-sperr = 'x posting block')  if the country is found in ztable. This check should happen while creation or change

  • SHIPPING TYPE

    Hi Our Business scenario is to create a Sales Order in CRM 5.0 and replicate it to ECC 5.0. In CRM sales Order customer needs to enter 'Shipping type' so it can replicate to ERP. but as far as there is no 'Shipping type' field in CRM sales Order. Ple

  • Javascript error in event handler event type = timeline

    Hi, I have a small EdgeAnimate projekt with version 1.5.0 and the local export works fine... I must include the package at a CMS and I update all paths to absolute paths and all files are loading... but I the animation dont play - I see at the javasc