Public Holidays in Clock in /Clock out :ESS portal

Hi friends,
I have maintained public holidays in my Holiday calendar in R/3.Inspite of this in the ESS portal in clock in clok out it is not showing as an off.
Please help me on this.
Regards

Sorry i havnt implemented ESS in my org tilll
if you have any Documents related to ess and mss please forward to my id..
hope you get Solution ASAP..
Thanks
Shakeel.

Similar Messages

Public Holidays in Clock-in Clock-out Corrections screen

In Clock-in Clock-out correction screen, it shows weekly offs but does not show Public Holidays.
How to display Public Holidays in the screen?
Regards,
Anurag

Sorry i havnt implemented ESS in my org tilll
if you have any Documents related to ess and mss please forward to my id..
hope you get Solution ASAP..
Thanks
Shakeel.

Clock-in and Clock out timings in ESS

Hi,
My client want to display the Clock-in Clock-out timings recorded at the terminal (we are not using CATS) to be displayed in ESS portal.Pleae let me know where (in which node) and how to do this.
Thx
J

You can use Clock in clock out iview which is standard available in EHP5 too, It displays clock in events from Teven!
ie 2011 infotype
check here more
http://help.sap.com/erp2005_ehp_05/helpdata/en/25/340b0507434193adbfe3f8fc8896c7/frameset.htm
do the customisaiton in PTCOR trans code in backend!

Clock in & Clock out in ESS

Hello All,
We are dong Clock in & Clock out in ESS. I have done with configuration.
But when i check in ESS for clock in & Clock out i'm getting error "There is no general processing process for rule group in period 11., error key: RFC_ERROR_SYSTEM_FAILURE".
Please let me know why system is giving this error.
Thank in advance

Hi Eswar,
Have you check is there any dump in backend in st22 for the user.
That will be better idea of what exactly is the issue.
Thanks
Arun

Clock-in Clock-out corrections using ESS

Hi,
When we change the Time data using Clock-in, Clock-out corrections in ESS, it is not appearing in 2011 (Teven table). When will this, gets updated to the table and is there any tiem limit set for the updation ??
Thanks & Regards,
Vidhya T.R

On ESS, there will be optoin to run Time evaluation. Generally the update happens after the Time eval.
If this helps, pl do reward.
Thanks
Narasimha

Clock in Clock out correction in ESS

Hello everyone,
We are running on portal 7.02 and ECC600.
We have EA-HR 605 in ECC and ERP2005 EHP3 in portal
We have configured UWL in portal.
In R3, program RPTCORAPP has been called by our custom transaction. All the workflow and task related activities are done as required.
In SWFVISU the task id is maintained with following details
APPLICATION WTimeCor
PACKAGE sap.com/ess~wtcor
In R3 system for every clock in clock out request generated, R3 system allows to accept or reject the same.
However portal doesn't provide the functionality of accepting or rejecting the correction.
Any correction done in the backend is however getting reflected in the portal.
Can anyone suggest as to how the R3 system's functionality can be made available in portal.
Regards,
Pooja M

Hello everyone,
We are running on portal 7.02 and ECC600.
We have EA-HR 605 in ECC and ERP2005 EHP3 in portal
We have configured UWL in portal.
In R3, program RPTCORAPP has been called by our custom transaction. All the workflow and task related activities are done as required.
In SWFVISU the task id is maintained with following details
APPLICATION WTimeCor
PACKAGE sap.com/ess~wtcor
In R3 system for every clock in clock out request generated, R3 system allows to accept or reject the same.
However portal doesn't provide the functionality of accepting or rejecting the correction.
Any correction done in the backend is however getting reflected in the portal.
Can anyone suggest as to how the R3 system's functionality can be made available in portal.
Regards,
Pooja M

Clock-in Clock-out correction in ESS BP 1.0 2004s sp9

hi guys,
The clock-in clock-out correction application from XSS(ESS-MSS) looks to be incomplete from a process view. In the ESS application I can see that ther eis an aplication for Employees to change clock-in clock-outs. But ther eis no approval mechansim assocaited to it. When i assign a WF to the PRocess in the customization, the request goes and sits in the MWW UWL, but the manager does not ahev an opitio to actuall approve it or reject it from UWL. I do not see any web dynpro application for the approval mechanism as we see for the leave request approval mechanism.
The documentation also never says that manager can approve from the web.
Am i missing anything here or is this the general process that Managers have to approve from the backend and no topiton to approve from MSS.
It would be silly to explain to managers that they have to access UWL to approve leave and log on to R/3 to approve clock-in clock-out corrections.
Please let me know if i am m issing anyuthing here.
regards
sam
Message was edited by:
sameer chilama

hi all
The documentation provided by SAP is misleading. SAP is in process of correcting the same. if you are looking at implemeting the workflow for clock in/out correction please follow the steps mentined below.
We have done this and it successfully works.
Description : Clock in/ out correction service under employee self service has a facility to use the worklfow but there is no workflow available that can be readily used. SAP advises to copy the standard leave workflow (WS12300111) and use the same. There is an approval program available (Transaction PTCOR -> Approve Docuement) for administrator. Using the same program we will be creating an approval workflow.
1. Create a custom transaction calling report program RPTCORAPP and selection screen 1000.(ZPT_APPROVE)
2. Create another custom transaction(Z_APPROVE_CLINOUT) with following code.
Call transaction ZPT_APPROVE AND SKIP FIRST SCREEN.
3. Using transaction sw01 create an object where call the above tranasaction.
4. Create a custom task with the above object and method (STEP 3) (There will be no parameter passed between the task container and the workflow as we are calling a transaction only)
5. Create Copy of WS12300111 using transaction SWDD.
6. Delete the step Process Request by Employee (TS12300116) from copied workflow.
7. In the copied workflow in the Approval process instead of standard approval task use the custom task created in step 4.
8. Activate the customized workflow.
9. Under spro config please follow the link Personnel Management -> Employee Self-Services-> Service Sepcific Settings-> working time ->Clock in\out Corrections-> Processing Processes -> Define Processing Processes
Under workflow template select the checkbox Use SAP Business Workflow.
Provide the number of Custom Workflow activated in Step 8 in the following fields.
WF ID New Clock-In/Out Entries
WF ID for Deletion of Entries
WF ID: Changed Clock-In/Out Entries
Once you are done with this process then on entering the clock in/ out time the workflow will be received by the next agent defined in the rule / expression that is used in workflow.
The output will work according to the report(RPTCORAPP) if in case there is any need to make change then a copy of the classes can be created that are used in the approval report and customization can be achieved.

ESS Clock in - Clock Out

Dear Experts,
Can we use ess for clock in clock out as a substitute or complementary to external time recording machine?
I know that ess have Clock in Clock out iview, but i believe its for correcting wrong entry not for making entry. Please advice on this matter.
Best Regards

You could create a custom iview to allow employees to 'clock in/out' if you wished.
I have gotten a developer to do this for me at one customer and isn't hard to do. Or you could use CATS iview for ESS employees to record their start and end times of work in. Just depends on what you want to do with the captured data?
Cheers,
Brad

Is it possible to have Clock in and clock out times in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Siddharth,
can you please elaborate this
Thanks
Bala Duvvuri

Is it possible to have clock in and clock out in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

Doubt Clock-In/Clock-Out Corrections

Hi,
We are implementing ESS/MSS on EHP5.
I have a doubt when configuring Clock in/Clock out corrections. In SPRO "Clock-In/Clock-Out Corrections->Define Processing Processes", I left checked only the option "Corrections Have to Be Approved".
So I started the tests. I logged on with ESS user, made a correction e saved. After that I logged on POWL with the MSS user (who is the managet of the employee whose made de correction) and the entry was there. I approved, run the report RPTCORPOST and the entry was saved in TEVEN (IT 2011) table. That was perfect!!!
I went throught the second test, now with manager performing the correction for his employee. I logged with MSS user, selected the employee, made the correction and saved. In my mind, if the manager is correcting a clock-in/clock-out, it should be approved automatically. So, I run the report RPTCORPOST and the entry wasn´t saved in TEVEN (IT 2011) table. I thougth that weird, and i decided to check if the entry could be in POWL. I went to POWL and the entry was there, waiting to be approved.
The question is: Shouldn´t the entry be automatically approved when the manager performs a correction for his employees?
Thanks
Bruno

Hi Siddharth,
Thanks for your prompt reply. I will notifiy my customer that this behaviour is an enhance.
As a suggestion for the future ESS/MSS version, the solution could allow setup this configuration.
Thank you again.
Bruno.

Clock in Clock Out

Hi,
After running the time evaluation the clock in and clock out corrections is not appearing on the portal.
We are using CATS for service provider to enter the clock in and clock out. Is there any back ground jobs which have to be run for the data to flow into the portal or is it any configuration settings.
Request help on the matter.
-shobha

Hi,
Technical Data
Runtime Technology
Web Dynpro Java iView
Technical Name of iView
com.sap.pct.erp.ess.timecorrection
Technical Name of Web Dynpro Application
sap.com/ess~wtcor/WTimeCor
Service Key
EMPLOYEE_WORKTIME_TIMECORRECTION05
Available as of
SAP NetWeaver 2004s
Data Source
SAP ECC 5.0 and higher
RFC function modules called:
PTCOR_SEARCH_NEXT_PROCESSOR
PTCOR_UIA_CUSTOMIZING_GET
PTCOR_UIA_EVALMESSAGES
PTCOR_UIA_FORM_ACCEPT
PTCOR_UIA_FORM_DELEGATE
PTCOR_UIA_FORM_PREPARE
PTCOR_UIA_TIME_ACCOUNTS
PTCOR_UIA_WEEKLY_CALENDAR
Software Component
EA-HR 500 and higher
Support
PT_RC_UI_XS
Support Languages
All languages supported by SAP
Use
Employees can use this Web application to correct, in a weekly overview graphic, errors that originated due to incorrect entries at the time recording terminal. For example, they can correct duplicate clock-ins or enter missing entries and account assignment data. An optional monitoring function and approval procedure enable the entries changed, deleted, and created manually to be checked and approved.
Kind Regards,
Saisree.s

Clock in clock out corrections error

Hi;
We have implemented ESS/MSS.
We have employees from 4 companies accessing the portal.
Employees of 3 companies can do their clock in clock out corrections properly.But the employees of the 4th company get a dump when they click on the clock in clock out link.
The error is as follows:
The current application triggered atermination with a short dump,error key:RFC_ERROR_SYSTEM_FAILURE.
Can any one help us with this?

Agreed with the other poster, please include details from your system dumps ST22 and SM21 logs. In addition inspect the NWA logs on the java stack to determine route failure.
Given that you have only 1 group terminating on RFC calls, it may be that this group does not have sufficient authorisation to leverage the RFC call or it may be that they use different EP System objects (should you have split EP roles) that are not configured correctly in EP. Hard to be correct since I am flying blind, but may be worth checking out.

Clock-in clock-out process

Hi guys,
WRT to ESS MSS what is the clock-in clock-out process.
We are nw2004s SP9. We see the clock-in clock-out corrections ESS application. But we do not find any approval mechanism for the same in UWL for the manger. Though a work item is generated when clicked it opens the leave request approval web dynpro application.
What do we do to set up the approval mnechanism for managers through UWL?
regadrs
Sam
Message was edited by:
sameer chilama

Hi,
I am also working on clock in/out processing. How did you resolve the issues?
Thank you,
Regards

Clock-in Clock-out corrections - change existing entry

Hi,
The employee's clock-in clock-out records are updated from the time recording terminal to Infotype 2011 via an interface. Now, when we try to use the SAP's clock-in clock-out corrections application to change the existing clock-in or clock-out time for any particular day, the application is not giving the date and time fields to change. However, when we create a new clock-in clock-out entry from ess, we are able to change the date and time for that entry but not for any entry that is transferred from the time recording terminal.
Any idea if the standard application can be used to change existing clock-in clock-out record or how can this scenario be met in ESS?
Thanks,
Deepa Balani

to ensure entries can be changed refer customisation in table V_PTCOR_WFATTR.
SPRO->Personell Managment->ESS->Service Specific Settings->CLOK in CLock
out Corrections->Processing Processes->Define Processing Process's docu
ment which reads:
Define Processing Processes (V_PTCOR_WFATTR)
this should be unchecked
Clock-In/Out Entries Cannot Be Changed
Specifies whether employees are permitted to change original clock-in/out postings (time events in the TEVEN table).
Note:
Time events that have been processed by a time administrator in the Time Events infotype (2011) cannot be changed or deleted in the Web application. >>>>>>>>>>> note this so you cant change, of course one can change already entered ESS time entries
This is a clock in clock corrections application where
in you can correct the Clock ins but cannot delete
the times entered through the terminal, but can
delete those corrections done through the application
itself. So in your case you can see
the difference, this application is not meant to
replace the recording terminal but to enhance it

Public Holidays in Clock in /Clock out :ESS portal

Similar Messages

Maybe you are looking for