Public name vs. contacts only

Hello,
  I set my public profile to only my Skype name in both spaces... Name/Skype ID....Yet when I go to contacts only it showed same as public setting. Is there a way post ones' name/nickname without it showing as public also? If not  maybe we should have this option. Hope my question was clear enough. Thanks all in advance for any assistance.

Thanks so much!  The problem was the security settings.  I switched the content protection for "contacts included" to "no" and now my contact info shows up on the incoming call display!  Thanks again for your help!

Similar Messages

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone # on BB Z10)

    on the Z10 Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact in the phone, even the call log it show the number and not the name.  How do I get the caller ID to recognize and display the appropriate contact name with the phone fro an incoming call? Any help would be greatly appreciated!  Thanks, Akhanbilal

    Thank you Arsen but, as with everyone else : (1) When you get an in-coming call, it has no call log on the phone app call log that allows you do a thing under the sun except to touch the number of the last call, and when you do, it CALLS THEM BACK. (2) On every other BlackBerry I have owned, about 10 to-date, I simply selected the last in-coming call and had a button at the bottom of the screen to allow me to ADD TO CONTACTS. (3) This does NOT exist on the Z10, and there certainly is no "Click on number, little slider pops on the right, select add to contact."  Instead it dials them.  Frustrating other uses have described Arsen. Further, while on the topic : (4) None of this has anything to do with 10-digit national dialing plan or anything else on swipe finger down from top in Phone App, Arsen. (5) When you swipe Phone App down, you see SETTINGS. Then, there are 13 items.  I have looked at all 13 items and see nothing as you describe to select, nor any instructions on what to set the SMART DIALING to when there are 3 area codes local for my city and country code shows +1. Further, while on topic here : (6) Visual Voice Mail has been turned-on and whatever visual voice mail is, never supported on any previous BlackBerry including my 9780 before this, I have it with T-Mobile and have it turned on on the BlackBerry Z10 and it too does not work.  On the positive side, I do have a work-around for BlackBerry Z10 to 2013 Toyota entune. (7) I first took a vm msg .wav file of just hello (blank will not send) and saved it on BlackBerry Z10.  The Toyota entune is LOOKING for a music and will LOCK-UP if none are found.  By giving it this, it worked on my 2013 Toyota entune for the 1st time ever.  Yeah !  It is a little frustrating every few minutes listening to myself say HELLO.  But, hey no one really notices it with all the other stuff going on NAVIGATION, radio, cell phone calls, and all the computerized alerts on 2013 Toyota even without entune. (8) What I did now was to go into Navigation and remove SYNC with MUSIC.  I accomplished that after pairing to Z10 to 2013 Toyota, by CANCELLING ALL CONNECTIONS leaving only the pairing itself.  Then, you must choose some connections in the pairing section of SET-UP within Navigation itself.  If you cannot even get to that point, try depressing on the Navigation Screen, INTERNET at which point it will allow you access to SET-UP when you see the message NO ENTUNE APP FOUND ON YOUR BlackBerry Z10.  Red-headed step-child is what we all are.  Have to help each other.  Arsen I appeciate you helping all of us.  Seems the list is about 20 who have voiced it here in this one thread.  We voice it for the 200 million BlackBerry users worldwide, all left out in the cold despite a pretty cool Z10 product. Far better than iPhone 5.  I chose phone and internet.  Internet comes back no BLACKBERRY Z10 TOYOTA ENTUNE APP.  But, at least now I don't have to hear the music HELLO and do not also have the BlackBerry Z10 LOCKED-UP with pop up message you have to say OK to 10 million times to clear and never can actually do a thing on the BlackBerry Z10 as  a result.  Cannot add an in-coming call to Contacts Z10. Cannot see name and number calling me, just the bloody number, no clue who is calling ridiculous. Cannot do diddle-e-squat on BlackBerry Z10 on Toyota entune.  No App.  Horrendous. TAGS : Z10 no caller-id name, Z10 no app Toyota 2013 entune, Z10 add call to Contacts

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone #)

    Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact.  Since I don't have many phone #'s memorized, I have no clue that it is someone I know.  However, the contact name is displayed in my call log, just not on the initial incoming call display.  How do I get the caller ID to recognize and display the appropriate contact name with the phone #? Any help would be greatly appreciated!  (I have the 8520 blackberry)
    Thanks, Lauren 
    Solved!
    Go to Solution.

    Thanks so much!  The problem was the security settings.  I switched the content protection for "contacts included" to "no" and now my contact info shows up on the incoming call display!  Thanks again for your help!

  • BB Os v. 7.1 - Caller ID for incoming calls NOT displaying name from contacts (only displays phone number)

    We realized since bbOS 7.1 update the bb lost the possibility to show the contact from address book associated to the callerID
    ___country code is correctly set
    ___the menu voice
    Options > Security > General Settings.==> Content Protection > Include Address Book = NO
     is not present
    ___the menu voice 
    options >> security options >> encryption
     is disabled
    The previous tread was messed up with similar messages related to devices with the new BB Os v10.
    But as far as this seeems to be a Os related issue, there is no sense in mixing

    Not sure how the area code rules apply in your area. When you call from your cell to a contact that has their name, does it show you their name when calling out and the call log also has their name. Go into the phone application, swipe down from the top and cehck your smart dialing features for country code, area code and National number length.

  • After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
    In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
    I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

  • After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

    After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • Deleted icloud account and now names are gone in contacts only numbers shown.  How do I get the names back?

    I created an icloud account but my 2 kids shared the same itunes account.  I had the kids delete their icloud accounts from their phones.  My contacts and my daughter's contacts merged on my phone, when she deleted her icloud account her contacts no longer show names... only phone numbers.  How can we fix this?

    The only possible way that you could get it back is if the app is still in your iTunes library. If you don't sync with iTunes and it is not in your iTunes library, unfortunately, your version of the app is gone now.

  • My i phone 4 when recieving texts from i phone 4s contacts only shows their phone number not contact name.. why?

    this only happens in text messaging... i've tried re entering phone numbers etc but doesn't seem to make a difference...  even if i look up a name in contacts (their name in contacts is still as it was)  if i click the name and click send message or if they send me a text, all that shows up is their phone number.  anyone else seeing this problem? 

    This is strange, but a lot of strange things can happen with the phone when data or code get corrupted. Did you look at your contacts to see if they aren't corrupted or duplicated?
    I suggest trying the usual troubleshooting steps as needed to clear the problem:
    1. Reset phone - press home and sleep/wake buttons until the Apple logo appears.
    2. Restore phone in iTunes using a backup.
    3. Settings > General > Reset > Reset All Settings
    4. Restore as a new iPhone.

  • How can I restore names of contacts to my message app. I updated to 8.0 and it only shows phone number now

    HHow can I restore names of contacts to my messenger app. I updated my iPad air to 8.0 and it changed it.

    Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

  • Public Folders with Contacts vs Address Book

    Which is the better approach: public folders with contacts or setting up an address book?
    I want to set up some sort of address book to hold details of some of our major clients. Rather than each person maintaining his/her own address list the plan is for everyone to maintain a single list. As soon as we deal with a "new" contact at
    one of our clients that person's details go into the central list and we all benefit.
    In the past we've used public folders. However, it seems to me that they are quite a hassle with OWA so i was wondering why we don't simply create a new address book with:
    New-AddressList -Name "MyCo – Customers" -RecipientFilter "(CustomAttribute1 -eq 'MyCo') -and (ObjectClass -eq 'Group')" -RecipientContainer "ad.ilbs.co/Habitats/myco"
    or should I use New-OfflineAddressBook -Name ...
    Our team run a variety of systems (Windows and Mac) and a variety of phones (mostly IOS and Android)
    Roger

    Hi Roger,
    According to your description, you want to share the contact which is created by each client users in OWA and Outlook to all other domain users for contact sharing. Is it right?
    If that is the case, the Public Folder is an option to achieve this as you mentioned. For address list in server side, only the administrators who have related permission to Exchange server can create an address list in Exchange server generally.
    For client users, they can’t create the address list for all other users using, though the contact folder permission is set to reviewer for all other users.
    If you are using Public Folder contact (default folder permission set to Author), each user can create contacts in this folder and the contact can be visible for all users. Then the client user can do the following settings in Outlook to
    manually add the Public Contact to address book:
    1. In Outlook, open Public Folder.
    2. Right-click Public Contact folder, select Properties.
    3. In Outlook Address Book tab, check Show this folder as an e-mail Address Book.
    4. Click OK to save the setting.
    Then the Public Contact folder should be added in the Address Book.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Unable to view contact name in Contact Group on CX 600

    We have CX600 phones which are tethered over USB to computers. I created a contact group in Lync client with some external phone numbers and I edited their contact card to show up the names for them. When I go to view Contact groups on CX 600 I
    can see the group and I can see all phone numbers but the names do not show up? Should I be able to view names and then click on the name and view numbers?
    Please help
    Thank you

    Hi EddieBro,
    Did you use another CX600 phone to test the issue?
    If the issue still exists, I suggest you can refer to the following steps and retry.
    1. Create and modify the Contact Cards in Outlook.
    2. Add the contacts in Lync.
    3. Check the result in CX600 phone.
    Note: Please make sure the contact only has one contact card in Outlook and remove all double entries.
    Best regards,
    Eric

  • How do I save a pages doc under different name?. it only says save version. I want to call it differentyl!, how do I save a pages doc under different name?. it only says save version. I want to call it differentyl!

    how do I save a pages doc under a different name?. it only says save version. I want to call it differentyl!

    Dan Mitchell1 wrote:
    (1) The OP is technically correct - there is no direct equivalent of  "save as".   There is "save a version" and there is "duplicate".
    (2) So far it seems that to get the same effect as "save as" you need to create a "duplicate", then save the duplicate.  The duplicate will automatically be given a name like "docname.copy.pages", which can be changed to that desired.
    (1) nobody wrote about the technical aspect of the OP's question !
    But, you wrote something wrong.
    There is a "Duplicate" item, a "Save a Version" item and there is a "Save…" item.
    (2)  The reproduced help page clearly state that the first step is to trigger 'Duplicate' For the second step, it's not clear. It seems that the ones writing the Help were not informed of the definite choices made by the developers. They wrote "Save As" but never was such an item. It was "Save As…" in which the ellipsis is an important component. At last, the developers defined two items : "Save…" and "Save a Version" ( at this time I'm running 10.6.8 so I can't check if this item has or hasn't an ellipsis).
    Yvan KOENIG (VALLAURIS, France) lundi 1 août 2011 10:20:08
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • After upgrade to itunes 5.0.1 names of contacts won't display in messages or phone

    Updated to iTunes 5.0.1 over wi-fi connection at home and now messages and phone calls only show number instead of name in contact list, how do I resolve this issue?

    Operator error! The mute button was on.

  • Losing relationship public names when updating from 10.3 to 10.4

    Hi
    Pretty much as the subject line says! When creating a rulebase in 10.3 OPM automatically creates public names (for containment relationships) when you name the forward and reverse relationships. When you open the project in 10.4 and run the upgrade wizard on the rulebase it doesn't carry the relationship public names across. Then if you try to build the rulebase as a module it says it can't export the entities as the relationships have no public names and you then have to go through all the relationships and enter by hand.
    Am I missing something here?

    Hi Roger,
    No you didn't miss anything. There might be a bug in the upgrade process which only affects containment relationship.
    I have logged this to be fixed in future release.
    Thanks,
    Kevin
    Edited by: Kevin Wan on 16-Oct-2012 16:35

  • Printing Company Name and Contact Name on Labels

    Does anyone know how to print BOTH the company name and contact name on the label in address book? I have read the "fixes" but they won't work for me .. I have a 10,000 person mailing list ... so I can't hand fix each one. Will this problem with address book be fixed in Leopard?
    THANK YOU FOR ANY AND ALL HELP IN THIS MATTER.

    Welcome to the discussions, Shadrach.
    I think the only way to do this is with a 3rd-party application such as Roll Call Directory, which reads the AB database but gives you greater flexibility in printing labels.
    AK

Maybe you are looking for