Public Spectrum??  Nexus 7/ Nexus 10 3g and 4g Support

Is this a sign of things to come Verizon?  When the best new products on the market remains unsupported by one of the largest bandwidth providers in the country?  As you know...many of us...your paying customers, expect that you would have our best interests at heart..that you would welcome new technology to use the public spectrum you've licensed from all of US...subject, of course, to license agreements as well as the rules of the FCC and an infrastructure to prevent Antitrust like behavior.
Today it's Google's new devices you've pretending don't exist...what device(s) will you and the others you've conspired with elect to keep from us tomorrow?   Hopefully your pals at the NSA don't cut you loose if some Senate Committee begins looking into possible anti-competitive behavior, breach of public trust, and conflicts of interest between the retail store and the bandwidth provider.   Certainly, any enterprising politician might decide to take up a cause like this once they see a little more outrage from paying customers being denied the use of one device maker's products on the public spectrum...and if not now...what about when the new Nexus 10 2 comes out in a few months..or the products from some other manufacturer that offers better technology that you decide to squelch?  How'd that work out for the I phone by the way...lolz....doubling down on bad decision making can't be your last word on this? 
So...just so you know...I, like many others, have been a loyal supporter of Verizon for many years, but in my opinion, these apparent bumbles in policy and lack of good sense has long term implications for your company as well as your private and institutional investors. As a bandwitdth provider, if you and your board don't see the writing on the wall...A public discussion concerning your stewardship of this privilege may soon be hard to avoid. 
Good luck with that~~~
Chris

If you understood block C and take what the internet says about it as truth... Then you come out to this conclusion.
The Nexus 7 does work on Verizon. The problem... Google muffed up the activation code. They said they'll fix it. You have to activate the sim before putting it in.
Any other device while CDMA is still in use is exempt from block C. CDMA is grandfathered and until Verizon drops their CDMA network replaced with LTE they don't have to allow these devices on the network.
All this stuff has been hashed and rehashed since the Galaxy Nexus. If you want to treat carriers like dumb pipes people need to back off on things they have no control over. Most people blame carriers for device troubles regardless if the device is unlocked or not. T-Mobile BYOD campaign is proof of this. If they are going to be blamed for every little thing you know they'd want control. I bet you'd feel the same way.

Similar Messages

  • Nexus 1000v, VMWare ESX and Microsoft SC VMM

    Hi,
    Im curious if anybody has worked up any solutions managing network infrastructure for VMWare ESX hosts/vms with the Nexus 1000v and Microsoft's System Center Virtual Machine Manager.
    There currently exists support for the 1000v and ESX and SCVMM using the Cisco 1000v software for MS Hyper-V and SCVMM.   There is no suck support for VMWare ESX.
    Im curious as to what others with VMWare, Nexus 1000v or equivalent and SCVMM have done to work around this issue.
    Trying to get some ideas.
    Thanks

    Aaron,
    The steps you have above are correct, you will need steps 1 - 4 to get it working correctly.  Normally people will create a separate VLAN for their NLB interfaces/subnet, to prevent uncessisary flooding of mcast frames within the network.
    To answer your questions
    1) I've seen multiple customer run this configuration
    2) The steps you have are correct
    3) You can't enable/disable IGMP snooping on UCS.  It's enabled by default and not a configurable option.  There's no need to change anything within UCS in regards to MS NLB with the procedure above.  FYI - the ability to disable/enable IGMP snooping on UCS is slated for an upcoming release 2.1.
    This is the correct method untill the time we have the option of configuring static multicast mac entries on
    the Nexus 1000v.  If this is a feature you'd like, please open a TAC case and request for bug CSCtb93725 to be linked to your SR. 
    This will give more "push" to our develpment team to prioritize this request.
    Hopefully some other customers can share their experience.
    Regards,
    Robert

  • Multicast: duplicated packets on nexus 7k with vpc and HSRP

    Hi guys,
    I'm testing multicast deployment on the lab shown below. The sender and the receiver are connected to the 6500 in two different vlans. The sender is in vlan 23 and the reciever in vlan 500. They are connected to the 6500 with a trunk link. There is VPc between the two nexus 7k and the 6500.
    Furthermore, there is HSRP running on the two vlan interface 23 and 500 on both nexus.
    I have configured the minimum to use PIM-SM with static RP. The RP is the 3750 above the nexus. (*,G) and (S,G) states are created correctly.
    IGMP snopping is enabled on 6500, and the two nexus.
    I'm using iperf to generate my flow, and netflow and snmp to monitor what happens.
    All works correctly, my receiver receive the flow and it takes the good route. My problem is that I have four times more multicast traffic on the vlan interface 500 on both nexus but this traffic is only sent one time to the receiver (which is the good comportment) and the rest of the traffic is not shown on any other physical interface in outbound.
    Indeed, I'm sending one flow, the two nexus receive it (one from peer link and the other from the 6500) in the vlan 23 (for example 25 packets inbound).
    But when the flow is routed in the vlan 500, there is 100 packets on each interface vlan 500 on each nexus in outbound.
    And when monitoring all physical interfaces, I only see 25 packets outbound on the interface linked with the receiver and the overflow isn't outgone.
    I have joined the graphs I obtain on one of the nexus for the vlan 23 and the vlan 500. Netflow says the same things in bits/s.
    Had someone already seen that? Any idea about the duplication of the packets?
    Thanks for any comment,
    Regards,
    Configuration:
    Nexus 1: n7000-s1-dk9.5.2.7.bin, 2 SUP1, 1 N7K-M132XP-12, 1 N7K-M148GS-11
    Nexus 2: n7000-s1-dk9.5.2.7.bin, 2 SUP1, 1 N7K-M132XP-12, 1 N7K-M148GS-11
    6500: s72033-adventerprisek9_wan-mz.122-33.SXI5.bin (12.2(33)SXI5)
    3750: c3750-ipservicesk9-mz.122-50.SE5.bin (12.2(50)SE5)

    Hi Kuldeep,
    If you intend to put those routers on a non-vpc vlan, you  may create  a new inter-switch trunk between the N7K and allow that non-vpc vlan . However if those will be on a VPC vlan, best to create two links to the N7K pair and create a VPC, otherwise configure those ports as orphan ports which will leverage the VPC peer link .
    HTH
    Jay Ocampo

  • Cisco Nexus 6004 | Fibre Tx and Rx Levels

    Hi All,
    On the Nexus 6004 series, does anybody know how to see the light levels for the optics.
    I am using the command: show interface ethernet 2/5/4 transceiver details which outputs:
    Ethernet2/5/4
        transceiver is present
        type is QSFP-40G-CSR4
        name is CISCO
        part number is AFBR-79EEPZ-CS2
        revision is 02
        serial number is XXXXXXXX
        nominal bitrate is 10300 MBit/sec
        Link length supported for 50/125um OM3 fiber is 300 m
        Link length supported for 50/125um OM2 fiber is 82 m
        cisco id is --
        cisco extended id number is 16
               SFP Detail Diagnostics Information (internal calibration)
                    Current              Alarms                  Warnings
                    Measurement     High        Low         High          Low
      Temperature   47.63 C        75.00 C     -5.00 C     70.00 C        0.00 C
      Voltage        3.32 V         3.63 V      2.97 V      3.46 V        3.09 V
      Current        0.00 mA        0.00 mA     0.00 mA     0.00 mA       0.00 mA
      Tx Power        N/A            N/A         N/A         N/A           N/A
      Rx Power        N/A            N/A         N/A         N/A           N/A
      Note: ++  high-alarm; +  high-warning; --  low-alarm; -  low-warning
    Is it a case that the SFP's in this instance do not support the light level information? the controller, optics or wdm commands are not available on the Nexus.
    Thanks all for your support.

    Hi Marvin,
    The System version: 6.0(2)N1(2)
    Software
      BIOS:      version 2.6.0
      loader:    version N/A
      kickstart: version 6.0(2)N2(2)
      system:    version 6.0(2)N2(2)
      Power Sequencer Firmware:
                 Module 0: version v5.0
                 Module 1: version v2.0
                 Module 2: version v2.0
                 Module 3: version v2.0
                 Module 4: version v2.0
      Fabric Power Sequencer Firmware: Module 0: version v3.0
      Microcontroller Firmware:        version v1.1.0.3
      QSFP Microcontroller Firmware:
                 Module 1: v1.3.0.0
                 Module 2: v1.3.0.0
                 Module 3: v1.3.0.0
                 Module 4: v1.3.0.0

  • Dell Servers with Nexus 7000 + Nexus 2000 extenders

    << Original post by smunzani. Answered by Robert. Moving from Document section to Discussions>>
    Team,
    I would like to use some of the existing Dell Servers for new network design of Nexus 7000 + Nexus 2000 extenders. What are my options for FEC to the hosts? All references of M81KR I found on CCO are related to UCS product only.
    What's best option for following setup?
    N7K(Aggregation Layer) -- N2K(Extenders) -- Dell servers
    Need 10G to the servers due to dense population of the VMs. The customer is not up for dumping recently purchased dell boxes in favor of UCS. Customer VMware license is Enterprise Edition.
    Thanks in advance.

    To answer your question, the M81KR-VIC is a Mezz card for UCS blades only.  For Cisco rack there is a PCIe version which is called the P81.  These are both made for Cisco servers only due to the integration with server management and virtual interface functionality.
    http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/data_sheet_c78-558230.html
    More information on it here:
    Regards,
    Robert

  • VFC is down Nexus 5020 Nexus 4001i

    Hi All,
    I am very new to Nexus 4001 and facing a problem related to its configuartion.
    The topology involves IBM HS22 blade server with Qlogic dual port CNA, Nexus 4001, Nexus 5020, MDS 9513 and EMC storage.
    I have done the configuration related to fip snooping in Nexus 4k and FCoE configurations in Nexus 5k.
    The problem is that i am not able to get the enode mac address when i am running the command "show fip-snooping vlan-discovery".
    also i am not able to make the vFC up in Nexus 5k.
    I can upload the configuartions if needed.
    Kindly suggest your comments or any solution.
    FYI: All licenses are installed in Nexus 4k and 5k and FCoE and CNA drivers are installed in IBM server.
    Thanks in advance,
    Sanjeev

    If the show mac-address is not showing any src mac being learnt in native vlan indicates server is not sending FIP messages.  The output you provided does confirm this  theory, see the marked output in bold which has value of zero.:
    Interface Name    Counter Desciption                                Value
    Ethernet1/1       Unicast packets received                          0
                      Multicast packets received                        0
                      Vlan discovery packets received                   0
                      Vlan discovery response packets received          0
                      flogi (fabric login) packets received             0
                      flogi lsacc (acknowledgment) packets received     0
                      flogi lsrjt (reject) packes received              0
                      fdisc packets received                            0
                      fdisc lsacc received                              0
                      fdisc lsrjt received                              0
                      logo (logout) packets received                    0
                      logo lsacc received                               0
                      logo lsrjt received                               0
                      Enode Keepalive received                          0
                      Enode Discovery received                          0
                      FCF Discovery Solicit received                    0
                      FCF Keepalive received                            0
                      Clear Virtual Link received                       0
                      Clear Virtual Link generated                      0
                      Unicast packets transmitted                       0
                      Packets dropped due to invalid length             0
                      Packets dropped due to tlv parse error            0
                      Packets dropped due to unsupported tlv            0
                      Packets dropped due to fcmap mismatch             0
    Based on the output you provided it looks to be a CNA issue, the  next step would be working with vendor to ensure Datacenter Bridging is working correctly.  Do you have OS loaded on local disk  or trying to boot from san?

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • Character string of en_AE and en_IL supported by CS6 is not reflected in a dialog title of plugin.

    Character string of en_AE and en_IL supported by CS6 is not reflected in a dialog title of plugin.
    [Development environment]
    Flex SDK 3.4
    Extension Builder 2.0
    Flash Builder 4.6
    Does development environment have restrictions?

    I have tried that already in my program. Its not
    working.Please elaborate.In my program i have tried the following lines. Those println statements are not printing anything. As i am using NetBeans IDE i can see that the program is not exiting, neither the dialog box is disposing, I am explicitly clicking Stop Build/Run to exit out of the application. I think only its becaming invisible when i am clicking on the [ X ] close button.
                    frame.addWindowListener(new WindowAdapter() {
                            public void windowClosing(WindowEvent e) {
                                    System.out.println("Inside frame.addWindowListener");
                                    LoginDialogTest.this.dispose();
                                    System.exit(0);
                    //control is not coming here
                    LoginDialogTest.this.addWindowListener(new WindowAdapter() {
                            public void windowClosing(WindowEvent e) {
                                    System.out.println("Inside this.addWindowListener");
                                    LoginDialogTest.this.dispose();
                                    System.exit(0);
                    });

  • HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS

    HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
    COMP
    Compaq Presario CQ42-372TU Notebook
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCac=...
    PLZ ANY BODY HELP MEEEEEEEE
    This question was solved.
    View Solution.

    You can upgrade to an SSD.
    The simplest method is to use an SSD like the Corsair Force 3 and be sure that you purchase the migration kit.
    The migration kit comes with cloning software and a usb to SATA/power cable that connects to the new SSD. 
    It is recommended that you purchase and SSD that is about 256 GB in capacity if you can find one that is affordable.
    SSD with migration kit options in a search that I did.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Does SRM 7 SC and PO Supports funds management with out PPS??

    Hi All,
    Does SRM 7 SC and PO Supports funds management with out PPS??
    Abdul Raheem

    Hi,
    Do you mean Public sector package is by using PPS. I am aware that SRM PPS supports Funds management.
    But I dont want to use PPS .
    I want Funds management integartion at SC and PO in SRM 7 Core not by PPS
    Abdul Raheem

  • How to create link to Bug DB and Oracle Support SR

    I have been trying to connect Bug DB to apex, but got a insufficient previledge error.
    I need to connect to Bug DB and Oracle Support through my APEX application to get bug status and SR status automatically.
    I think I should create db links to Bug DB and Oracle Support SR DB first,
    but I got below error while trying to do it.
    Create Database Link Failed.
    ORA-01031: insufficient privileges
    Who can grant me the privileges, or let me know how to link to Bug DB and SR DB.
    My Workspace / Schema of APEX(apex.oraclecorp.com) are listed below.
    OARDC_JSRC / JSRC_CLJ --- For Development and Test
    NOKK_JSRC / NOKK_JSRC --- For release.
    Thanks & Regards,
    lgui

    Hi Igui,
    please don't discuss Oracle internals on the public OTN forum. We have an internal mailing list for such questions. Please see "Internal Application Express Discussion Forum" and "Contact Support" link in the "Side Specific Tasks" region on the login page. This link will also explain what to do to get database link privileges.
    About BugDB integration, please have a look at the following posting http://joelkallman.blogspot.co.uk/2010/12/bugdb-reporting-version-2.html
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I may be way out, but do you know about this product, would it help integrate the Macs for you.
    https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

  • IMAC's Top graphics card frustration - Cheap and no support for Adobe Mercury Playpack Engine GPU Acceleration?

    If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
    Please, if you have a solution for me, let me know. Otherwise I find it pretty frustrating that I purchased a top-end iMAC, fully maxed-out in every way possible, and that the iMac doesn't support Adobe Premiere's Mercury Playback Engine GPU acceleration. Also, an old USB 2.0 Hub and thus the built-in SD card reader is slow. If you have SD cards with 95MB/s Transfer, Read and Write speeds, the iMAC will only transfer at around 30MB/s if you're lucky. Technically 480Mbs which is around 50MB/s but I haven't seen those speeds.
    I figured this could at least be circumvented with a Thunderbolt SD card reader or a Thunderbolt to USB 3.0 adapter but of course no such thing exists.
    Well, nothing with a reasonable price tag. This all might seem trivial to some but when you're uploading 24 hours of HD video footage from a 128GB SDXC card, the speed makes a big difference.
    And come on, no BluRay support? Ridiculous. I get the politics of why but still, just ridiculous. It would be nice to be able to burn a BluRay to watch in my home theater system. There are other methods but BluRay is convenient and great for backing up large Video Files. Unfortunately BluRay looks like it's not going to make it.  Maybe cable distribution companies will increase their Internet upload speeds one day and I can just store everything in the cloud and watch full length movies(that I've created) on Vimeo.
    Anyways, I went and took a look at the hardware Apple stuffed inside my fancy (3.4 Ghz i7, 16GB 1333 DDR3, 2GB AMD 6970M, 256 GB SSD Internal and 2TB 7200 Internal) machine and it appears to be pretty middle of the range stuff. It's an iMAC, not a Mac Pro so why am I griping? Because my 2009 PC(which I tricked out over the last two years) is faster and does support the Mercury Playback Engine. I spent $2100 total on this PC which includes all my upgrades. I spent around $3300 on the iMAC. I feel ripped off.
    Yes, I do love my iMAC on multiple levels but had I known my dated 2009 PC would render video projects faster, I would have gone with a MAC Pro or just a new PC. It seems that Mac is moving completely away from making high-end computers for niche markets(video editing) and focusing on their tiny laptops, IPADS and IPhones for the masses. Obviously smart from a capitalistic perspective(at present at least) but very frustrating for some.
    I was actually told to purchase a MAC for video editing. I've been a PC guy for 15 years. I went with the iMAC because I had read many good things about it(probably just Apple propaganda)  and also the MAC PRO was to be discontinued. Also the MAC Pro would have been triple the cost for what didn't seem like a whole lot more.
    It's one's thing to prepackage a computer with inferior hardware(the iMAC I have is fast for most things and more than enough for 99% of the population) but to not allow us to pop open the computer and make a quit upgrade to the machine is what really makes me feel like I'm using a computer built for Grannies. I mean there is a reason my mother loves iMacs and Iphones. Amazing that I was able to upgrade my memory from 4 to 16GB  but I've heard Apple has even done away with that. I get why they do it. Apple Warranty, Apple Care issues, Profit and World Domination: Apple wants a monopoly on everything.
    Was great to see Adobe bounce back after the whole Flash/HTML5 thing and knock Final Cut Pro off the face of the Earth for good. People are still buying it b/c of the brand name but Final Cut is done. David Fincher used Adobe's Workflow for everything when he made The Girl with The Dragon Tattoo. Hollywood is making the shift and the world will follow. The Adobe Workflow has finally come together and there is just no way Apple can compete with Adobe Creative Cloud and an Engine that can just swap from Premiere to After Effects to Prelude to SpeedGrade to Photoshop to Story with speed for $29 bucks a month(or $49 for some). Apple better start supporting Adobe's Mercury Engine or they may have a problem. And if you're using Final Cut X, you're severely handicapping yourself. Problem is that people don't want to take the time to learn Adobe's products(steep learning curve for sure) which is where Apple's Granny software, and perhaps computers, comes in to play. Arnold Schwarzenegger once said "Milk is for babies, Real Men Drink Beer".  I'm beginning to think that "Mac's are for Grannies, Real Men Use Adobe and PCs".
    The major problem with Apple is you're forced to use Apple. Not sure but history has proven that people don't like to be forced into anything. Autocracies don't work. These systems eventually topple, even in the corporate world.
    Amazon.com, now that's the company to emulate. What an amazing machine!
    I've read that Apple may even discontinue the iMAC after 2013. Who knows?
    If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
    1) Graphcis Card  - AMD Radeon HD 6970M 2048 MB (6990 would have been better or something from NVIDIA.
    2) USB 2.0 Hub with only 480 Mb/sec
    3) Seagate Baracude SATA I 7200 RPM drive with 3GB/s transfer rate and only a 32 GB Cach. It's ok. I would have expected at least a Western Digital Caviar Black 2 TB SATA III 7200 RPM 64 MB  or the Velociraptor at 10,000RPM.
    4)APPLE SSD TS256C  Flash Drive. As you can see, it doesn't stack up so well against other SSD Drive.
    Just average. http://www.harddrivebenchmark.net/hdd_lookup.phphdd=APPLE+SSD+TS256C

    Whining and ranting about how iMacs can't do this or iMacs/orMacs can't do that is not going to get you a lot of help here.
    Your "I love my MAC" is typical of the ever ubiquitous PC whiner.
    If your video work needs were that computer intensive and critical , you should've done some online research and you should have budgeted for a Mac Pro.
    Mac Pros are completely expandable and upgradeable unlike the iMac.
    Mac Pros have much more faster and more CPU cores than the iMac line.
    iMac line is limited to CPUs with 8 cores. The Mac Pros, I believe, are up to 16 core CPUs, now.
    The Mac Pros can have their GPU upgraded and you even add/expand to use specialty audio/video cards.
    Mac Pros are the defacto standard for real video work.
    iMacs, even the high end model, is not really designed to do really heavy and intensive video work.
    iMacs do do video creation and editing. Just not on the level that is needed from a more "Pro" computer.
    It seems to me you are asking your iMac to do more than it was originally designed for, in terms of professional video editing.
    You get a lot more out of a Mac Pro than an iMac for any real serious video, CGI or animation work.
    You just didn't want to spend that much cash on one.
    iMacs are not user upgradeable or friendly to user upgrades at all!!!
    If you purchased a Mac Pro, you could've had that better, faster HD, better faster SSDs.
    That said, I can offer no real help to but because of the nature of your post and the fact you just simply annoyed me, I feel some advice and explanations are in order
    First off, you picked Adobe video editing software suite as your video creation software on the Mac.  It's no secret to long-time video content creators on the Mac that Adobe products, especially those for video creation and editing are very user unfriendly on the Mac. Even though Macs are supported from Adobe, Adobe for a long time has treated the Mac and Mac users as second class citizens.
    Before purchasing and installing Adobe Premiere, did you even check Adobe's site for the preferred system hardware and software requirements? Hmmm?
    This is why you should KNOW what software you are going to be running on a computer first then research what computer make and model will run said software.
    That's why Apple has its own apps like Aoerture, Logic and Final Cut.
    Despite your ignorance in this matter, Final Cut Pro X is alive and doing well, thank you, and using this software on your iMac would kick Adobe Premier in the you know whats.
    Final Cut Pro X is a complete video solution for and completely designed around the Mac.
    Why are you using USB 2.0 connections for video work when you have a perfectly good FireWire 800 connection.
    In case you are not aware, FireWire 800 is called so because it has a max throughput of 800 Mbps.
    Your 2011 iMac can take up to 32 GBs of RAM. Not just 16 GBs.
    This changed when the 2010 model iMacs came out.
    Blu-ray? I believe you can buy external Blu-ray writers that work with Mac using said FW800 connection.
    So you cite one movie and one videographer using Adobe Premier for your premise that Final Cut is dead in Hollywood?
    Your argument that Apple locks you into everything in their world can be countered by saying Windows and Windows PCs lock you into the Windows world. What's your point?
    Apple is not discontinuing their computers platforms any time soon.
    All you are regurgitating is rumor. Probably from all of the PC crowd.
    iMacs and professional desktop Macs are not going anywhere.
    Currently, Apple is the only desktop/laptop computer maker that is still making a profit on their Macs and increasing their market share percentages for the last 5 years during which the PC market has continually slumped/dropped in its market share.

  • Mp3 and j2me supporting reliance mobile

    hi,
    if anyone know abt mp3 and j2me supporting Reliance phone in market.if so please give me the link where to get teh details I already checking it with reliance website and i want more information please help me.
    thanx in advance
    laxmi

    hi laxmi
    i dont know did you check this URL
    www.dadp.com
    there is one forum also avail for the j2me and realience phone you will get all the information tehre
    regards
    [email protected]

  • Windows Vista 64 Bit and Button Support - Qosmio G30?

    Windows Vista 64 Bit and Button Support?

    Everybody claiming that Vista x64 (or Ultimate) can't be used with FN keys or Flash Cards is utterly wrong!
    I have a Qosmio G30 running Vista x64 Ultimate, and have both FN keys, Toshiba Flash Cards and (partly) the hardware buttons at the top working.
    After a lot of research, I found that Toshiba has released a 64-bit version of VAP called util_tvap_27581D. If you google it, you might discover it...

Maybe you are looking for

  • Deleting images from hard drive

    My hard drive warned me its capacity if almost full, so I deleted bunches of photos, but it made little difference in the amount of available space. Does this mean all my deleted images are still deep in there somewhere taking up space? If so, how do

  • Is Adobe Illustrator 8.0 compatible with Windows 7?

    Is Adobe Illustrator 8.0 compatible with Windows 7? It will not install automatically and when I try to manually run the setup exe I get an error message.

  • How to save sessions on Mac OS X

    Hello, is there a way to save an entire session on Mac? I mean when I am working on a project I have all the related windows open. Then if I have to shut down the computer (I still haven't been able to solve the problem of sleep and hunger, but I am

  • Problem in activation of datasource

    Hi , when Iam trying to activate the Datasource from RSA5 , It is asking for TR .When i created my Own TR and saving the object under the Created TR , it is showing the following error . Can you please help me out in this regard . Error -- SAP names

  • How do i close 1tab so that i can open new tab

    My tab is a SKK brand