Public URL for Business Object servers

What is preferred method to access BO by external clients?
Here is our setup, 2 tomcat servers, 2 BO servers and F5 for load balancing
I am thinking to put 2 tomcat servers in DMZ and open up the ports for BO servers in the firewall.
I would like to know what all the options you guys have in your environments.

Dennis,
Since we have clustered BO servers (2 node), for example, one CMS in each server, do we need to open one port in the firewall which is 6400 and assign that port to both the CMS or we need to assign different ports for each CMS, like 6400 for 1st CMS and 6411 for 2nd CMS?

Similar Messages

  • Language attributes for business objects ERC_CDCY

    Hello,
    I need to activate TREX index ERC_CDCY from our e-recruiting system using SES_ADMIN transaction.
    When I activate it, I receive error message UNCAUGHT_EXCEPTION (CX_SY_OPEN_SQL_DB) at the
    relational index level (Relation of candidacy).
    I opened a message with SAPnet and got the following answer:
    Indexes are only created in english compared to others systems that contains indexes in both languages (EN, FR). We could not find any french attributes for business objects ERC_CDCY which is required (at least 7 words) to index it in french language.
    Do you know which transaction or SPRO menu path I could use to maintain de language attributes and the 7 words?
    Thanks for you help
    Hugo

    Hello Huga,
    About maintaining the language in E-Rec  you can have a look at the table
    V_T77RCF_SELANGU, there you can maintain the different language.
    The exception you are getting might be coming from the TREX side. please check the following notes:
    1260684  SQL statement terminates: "Too Complicated SQL
    1249465   TREX 7.1: Installing TREX for Embedded Search
    Best Regards,
    Deepak.

  • EWA for Business Objects (XI 3.1) within SAP Solution Manager

    Hello!
    We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
    Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
    We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
    Question
    Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

    Hello,
    The short answer is no. You can verify this in SAP Note  1507629  - Preparing a BOE system for Service Sessions in Sol. Manager.
    "...1.) Managed System Setup
    Perform the Managed System Setup for SAP BusinessObjects Enterprise as
    described in the "End-to-End Root Cause Analysis System Landscape Setup
    Guide". This guide can be found in the SAP Service Market Place:
    -> http://service.sap.com/diagnostics
        -> Navigate to the "Media Library"
           -> Open the document "SAP Solution Manager Landscape Setup Guide"
    Please ensure that you perform all steps mentioned in the guide which
    are relevant for your product and version. Please read also SAP note
    1357901, which is also referred to in the above mentioned setup guide."
    So this is a requirement. There are also pdf documetns attached to this note  that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
    The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
    Regards,
    Paul

  • How to do the Unicode Check for Business Objects ?

    Hi all,
    How to do the Unicode Check for Business Objects ?
    Note: All business Objects are stored in BOR (Business Objects Repositary)
    Thanks in advance
    Sri..

    Hi..
    i have used the  UCCHECK  transaction for some business Objects
    For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
    and for Business Objects it showing the message like : There is no program corresponding to this selection.
    Why system is showing like this ?
    Thanks in advance
    Sri..

  • Three-system landscape for Business Objects

    Hello!
    I'm new at Business Objects and I don't have imagination about it landscape. Do I need to make three-system landscape (D Q P) for BO with broadcasting to BI (D Q P) systems correspondingly? Or maybe I need make all customizing in one BO system? Could someone advice any documentation about lanscape for BO and BI?
    Thank

    Hi
    Please refer this site for Business objects
    http://help.sap.com/businessobject/product_guides/
    Regards
    Prashant

  • Version Control for BUSINESS OBJECTS repository

    Hi,
    Do we have any version control for business objects repository?
    Thanks

    Hi
    I am hoping someone can answer my Version Control queries. The LCM document is limited in its detail on VM.
    I am currently testing the BO LCM 3.1 and while it appears very easy to use especially for promotion, the Version Control Manager seems to be lacking in controls and a clear promotion path from dev to test to uat to prod.
    We have set up 2 identical environments for UAT and PROD.
    And using the Version Control part of LCM creating version control for a universe.
    Logged into VM in UAT
    We have selected a universe
    Added it to VM
    Made a change to the universe in Designer
    Exported it
    Then Checked it in
    Can now see 2 versions in the history and the VMS Version. All good
    I then click on swap system and log into PROD
    The VM history is also there in PROD
    I have a number of concerns and questions and can't seem to find the solution to them anywhere.
    1. VM seems to be lacking a controlled process from all the environments. Basically we want to deploy following this path;
    Dev - Test - UAT - PROD
    There does not seem to be any controls or security which would stop you from GET VERSION from the DEV environment and putting that straight into PROD. Obviously we would not want that to happen.
    We would only want to GET VERSION from UAT
    Similarly for UAT We would only want to GET VERSION from TEST
    And for TEST We would only want to GET VERSION from DEV.
    Granted, we currently only have 2 identical environments.
    But Is there controls that would stop you when in PROD from getting versions from any other system other than UAT?
    Also is there any reason why no promotion is required when using VM.
    This seems to negate the Promotion Function of the LCM
    Any advise would be greatly appreciated with this.
    Many thanks
    Eilish

  • Trex search for business object in portal

    Hi
    I would like to build a KM search iView in portal which enables users to search for business object from backend system.
    I have built up the indices for business object in the backend system. In portal->trex monitor->display index details, I can see the indices which are created from backend system. But soemhow, I feel the indices are not usable, as I can not see them in the indexing monitor. And after I created an KM search iview with search component 'search_input_indexes', my index created from backend can also not be shown in the preview of the iview.
    I guess there is some step missing. Any help will be appreciated.
    Thanks and best regards
    Yingzhi

    Hi Yingzhi,
    with current releases, business objects indexed through the ABAP-based Search Engine Service (SES) or directly from certain SAP solutions to TREX are not by default accessible from KM.
    The next release after NW2004s will enable Enterprise Search and provide the meta-search engine for parallel search access to business objects and KM documents.
    Please see the following presentation for some explanations on SES and Enterprise Search and note stated time-lines:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73f3eedf-0501-0010-0aa6-950694c02f99
    In some monitors that access TREX directly from the portal, you may see the business object indexes, but they are not actually known to KM.
    Regards, Karsten

  • What are the certification books for Business objects Xi developer certifi?

    Hi all,
    i am planning to take up business objects certifications Can anyone tell me the prescribes books for the certification? i am able to find out the exam codes from persaon vue but no the Prescribed books can anyone pls guide me on this!!
    Thanks
    Pooja

    Hi Pooja,
    I am also looking for Business Objects certification materials. but didn't find any where.
    If you find, please can you advice me on this.
    very appreciated on your help.
    Many Thanks
    Sree

  • CCMS for Business Objects

    All,
    I am trying to configure to ccms setup for  Business Objects XI 3.1 but could not find right documentation specific to BO.
    We need to monitor Tomcat, some of Bo server and also file systems.
    Have anyone done anything with CCMS on BO ?
    Thanks in Advance for the help !
    Raj

    I don't know about CCMS and BO.
    But if you need to monitor BO, you can use the probes.
    You have to create an automation process yourself.
    I created a console app in .net that runs the probes every 15 minutes and sends me an email everytime there 's an error.
    The probes are really easy to use and install.
    The output files can be used with TIvoli or other monitoring tool.
    Here is the link: SAP Research - Productized Prototypes

  • Supported Operating Systems for Business Objects Enterprise

    I am unable to locate information on the supported operating systems platforms for Business Objects Enterprise version (11.0.0.1775) build (1775) within the BO support documentation.
    I want to know if this version of BO is supported on AIX (xlC.aix50.rte version 8)?

    Not sure which exact version is 11.0.0.1775, but it's definitively BO XI release 1, so I guess this document is your best guide:
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a03454bd-a03e-2b10-98b7-fc11486d87bf
    And it mentions AIX 5.1 as a minimum so you may be out of luck...

  • Portals supported for Business Objects

    Post Author: izhar
    CA Forum: General Feedback
    Hi all members, I want to know, just like Sharepoint Portal which are other portals to connect with Business Objects. Which are other portals to be supported with Business Objects? Kindly any member guide here.
    Any link having lists of portals supported for Business Objects is welcome.
    Regards, Izhar

    Post Author: jsanzone
    CA Forum: General Feedback
    Izhar,
    I would suggest going to the Business Objects Support site and doing a search on "portal integration kit" (and before clicking on search, choose your product via the "Products:" indicator, as well as choosing the Document Types of "Kbase Articles", "Product Documentation", and "Technical Papers").

  • Activate Change pointers for TREX classification search for Business Objects

    Hey all...
    Does anyone out here has any idea on how to activate the change pointers for TREX classification search for business objects: - for me I am specifically doing it for Materials and Customers.
    Okay, let me explain the issue: -
    For TREX search, we need to schedule a background job for Delta Indexing. But Alas! Delta indexing does not capture the changes to Classification data of the business object.
    For this we activated the change documents for the particular class in the customizing. But to my surprise, change documents and change pointers for TREX are entrirely different.
    How do I know:
    Change ID of CDHDR does not correspond to Change pointer in table COM_SE_CPOINTER. Now by activating the change documents I am getting entry in CDHDR and CDPOS but the mentioned change pointer table still does not get the entry.
    I searched for BTEs and I got the below: -
    Now to me the very obvious one was 4003, but it is not called while changing the classification data for materials. Ofcourse I activated the Product and the function module.
    and now I am stuck!!
    Any pointers for the Change pointers would be really appreciated??
    Please share your knowledge even if you don't know the exact answer . I am new to TREX so possibly vague conversations could provide me a hint .
    Thanks,
    Best Regards,
    Shreya

    Hi Guys,
    This issue was solved by implementing the BTE 4005 (OPEN_FI_PERFORM_00004005_E). This particular event is triggered in the update task for saving changes to business object. So In my function module (corresponding to BTE), I have explicitly called the method to write an entry in COM_SE_CPOINTER, because we just need the reference of business object for which classification data is changed.
    Please refer the below code for more clarity.
    BTE position: -
    method called in FM to write change pointer.
    Thanks anyways, for all the responses.
    Cheers,
    Shreya

  • D & R only for Business Objects? Or also for transactions?

    Hi,
    is D&R only possible for business objects? or can I use a R/3 transaction as source / target destination? Or do I need a Business Object as a wrapper to call R/3 transactions?
    regards
    Ralph

    Hi Ignacio,
    thanks for the answer.
    Why soever I can't give you points. There are no radiobuttons on the left side of your answer
    So sorry
    Regards Ralph
    Message was edited by: Ralph Nagel

  • Partner Center of Expertise for Business Objects - roadmap

    Hi there!
    what are certification steps (roadmap) for company, that want to become a Partner Center of Expertise for Business Objects?
    thnx in advance...

    https://websmp101.sap-ag.de/~sapidb/011000358700000461922010E

  • Public URL for Synchronous SOAP to RFC scenario

    Hello  Everyone,
    I have synchronous SOAP to RFC scenario.
    i have created the http URL for testing environment through sender agreement.
    However, now the user wants a public URL and that too secured one ... means (  https  ) in production.
    i tried this blog, but Service registry is not configured in our landscape.
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/23725
    is there any other way ..?
    Regards,
    Ravi

    The process of creating the wsdl will remain same. The url in your case will start with HTTPS instead of HTTP. Note that the port at which HTTPS data would be received will be different than HTTP port and thererfore you need to change that as well. You don't have to set any client authentication unless there is a business requirement. You may simply use certificates for SSL.
    In some cases, if PI always receives data through web-dipatcher (ask your network team), then the data hostname and port of web-dispatcher should be used.
    Regards,
    Prateek Raj Srivastava

Maybe you are looking for

  • Itunes doesn't add all the songs from my library

    Hi, Had to reinstall Itunes and now the program doesn't add all the songs from my library (roughly 4,000 songs). All that is added is maybe 20 songs, and always the same ones. It has worked perfectly before. I have tried to "pull" all the artist fold

  • HT4664 Is the GTX680MX in the late 2012 iMacs OK?

    I recently bought a new iMac with the upgrade to the GTX680MX and both FCPX and Motion are crashing MacOS entirely frequently (no error message, the whole OS stops responding and then a moment later, the mouse pointer stops responding and it remains

  • Managing right/left spread shuffles

    Hi everyone, I'm laying out a bunch of catalogs. Each one has (essentially) two master pages, which are left and right pages. Each has a color bar down the outside edge, as well as the company logo, page number in the lower outside corner, etc. Each

  • Yellow lines and some purple around the screen, and freezing, help?!

    hi i have an iMac G4 First generation, and lately, the computer has been malfunctioning in the strangest way; its been either crashing and freezing up, OR invaded by yellow and orange lines all around the screen... i tried a clean install of system s

  • Video equipment question

    Greetings all. Please let me apologize in advance, this is NOT a strictly FCPX question. That said, I am hoping for some advice or perhaps an idea of where to go to get it from this group of experts. I am a long time FCExpress user who has recently m