Publicate a book at a specific group (not at public group)

Hi, All!
Could anybody help us?
We have SAP BPC 10.0 NW and we create a book. It is working well and it is located at public group. How can we publication at a different group?
Best Regards,
Ana Teresa

Unfortunately, no there isn't.
Although iSync contains a "Put events created on the phone into: [calendar pop-up]", for some unknown reason, Apple have not included a corresponding "Put contacts created on the phone into: [Address book group pop-up]".
Seems like a huge oversight to me, and I've no idea why it is like this. You would think it was easy enough for Apple to add this simple feature.
Jools

Similar Messages

IPhone question: when I receive a call from someone who is not in my contacts and I then decide to add that number to my contacts, is there a way to put it directly into a specific group?

After receiving a call on my iPhone 4s I decide I want to add their number to a specific group in my contacts using the "Create New Contact" option. When I do this it only is established in the "All Contacts" group. Is there a way to add it directly to a specific group?

hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book?

Address Book-cellphone sync with specific group

Hi
i have several groups in my addressbook and a razr(waiting for the iphone) and i synce only one group.
It syncs fine, but when i add a new phone in my cell and sync, it adds the new contact to the address book and not the specific group i indicated in isync.
is there anyway it can be added automatically to the group as specified in isync?
thanks in advance.

Also, just been playing, when I go in through settings to Mail, Contacts, Calendars the phone again just returns to the home screen.

How can I see in my address book all contaacts that have not been placed into groups?

How can I see in my address book the contacts that have not been put into groups?

The best way to do that is create a new "smart group" with the following:
This way you can identify those without a group and drag them to one.
Regards,
Captfred

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Adding email addresses to SPECIFIC groups in Address book

Hi
I have created a folder in MAIL which receives specific mails. I want to add all these senders to a SPECIFIC group in my address book. The only option I see will add all these senders to my general address book and that's no good since I want to be able to contact this specific group only.
Is that possible and how ?
Thanks

There is a collection of AppleScripts called Mail Scripts you can download at this link.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script you want to use from the collection of included scripts is Add Addresses (Mail) which adds addresses found in the selected messages (in the header fields "From", "To", "Cc", and "Bcc") to the Address Book. This is much more flexible than the "Add Sender to Address Book" available in Mail and provides a convenient way for creating mailing lists.
* Select all messages you want to use for creating the mailing list (for creating a mailing list, you would choose all messages in a mailbox which contains all messages on a certain topic).
* Run the script and you get a list with all addresses contained in the selected messages - mark all the addresses you want to add to the Address Book using the checkboxes.
* From the popup menu, choose which group you want to update with the selected addresses or select "Create new Group..." and enter the name for the new group to be created.
* The script checks whether an address is already present before adding it to the Address Book in order to avoid duplicate entries. If additional information is available for an entry already present in the Address Book (e.g., full name information for an entry which had prior been email-only), the entry will be updated.

Why do I not receive iCloud e-mails when there is a specific group of "To:" addresses in the body of an e-mail

I noticed this when I started my iCloud e-mail account a few months ago. I am not receiving iCloud e-mails when there is a specific group of "To:" addresses in the body of an e-mail. I can receive the e-mail on my outlook & local cable providor e-mail accounts with all of the addresses listed. If I strip out the "To:" addresses and send it from my local cable providor e-mail account to my iCloud e-mail account than I will receive the e-mail in my iCloud account (minus all of the "To:" addresses that are in the body of the e-mail. This has caused me to miss a lot of e-mails.
Following is one of the e-mail that I can send from my cable providor account and not receive it in iCloud. If I strip out all of the "To:" addresses I will receive it in iCloud. I have a case open with Apple but it is not going anywhere. This occurs from multiple sending internet service providors (ISP's) so I think it's an Apple iCloud e-mail processing issue.

I've been having a very similar problem to what ziemsen describes, for about a week now. The Mail app has stopped delivering new messages to the Inbox, even though I can view the newly incoming messages on the server via Webmail. I am able to send email through Mail with this email account, and as for the other email accounts that I have on Mail (which are also hosted by the same server), I am able to both receive and send email with no problem.
None of the mail settings have been changed, so how this happened all of a sudden is very puzzling. I have checked Account Info on the problem account - Mail recognizes that there are messages that are on the server yet to be downloaded, but it won't download them.
I've checked what other users have suggested here in the Discussions Forum, and tried: 1) deleting the problem Mail account from Mail and re-adding it; 2) creating a new machine User account and setting up Mail with that User; 3) setting up Mail on another machine; 4) archiving and re-installing OS, and even 5) wiping the HD entirely and reinstalling the OS. None of these have worked.
Ernie, your suggestion of deleting the MessageUidsAlreadyDownloaded file sounded like the solution to the problem, so I just tried it - but to no avail. Mail delivers messages that are on the server to my Inbox up until the same point that it always stops at, and there are almost 1000 new messages since then.
I am pretty lost at this point - I have no idea what else I can possibly do to resolve this problem. The strange thing is, when I tested my email accounts on Microsoft Entourage and Mozilla Thunderbird, they don't have this problem - both deliver all of my incoming mail. I may have no choice but to switch to one or the other at this point, but I'm attached to Mail and would really like to continue using it if I can. Any advice would be much much appreciated.
very best,
biteringo

Export a specific group in Address Book to Gmail

how can u export a specific group from AddressBook to anything...everytime I export out of Address Book it exports all of the contacts...what am I doing wrong?

Dear nemocimino ,
you might wish to review
http://www.turingart.com/abtlan_en.htm
This app allows to export groups using various formats.
Kind regards

Is update not approved for a specific group via powershell.

My apologies in advance for asking a similar question to the one I asked two months ago,
is update approved for specific group via powershell? I thought I had this covered, but as I've found time to continue to work on this project I see that it does not.
I have a script that iterates through updates and if the release date is older than 30 days and they have not already been “Approved for Install” or “Approved for Removal” for a specific group it approves them. I am currently faced with the dilemma that
when an update is set to “Not Approved” for the specific group I’m working on it does not come across in my group’s approvals and there for I cannot detect its current state to know if I should approve it. In other words, I don’t want to approve an update
that I set to not approved for a specific group.
I am currently achieving all this so far by connecting to my WSUS server and getting any and all updates via $all = $wsus.GetUpdates(). I Then get my group’s approved updates via $groupApproved = $wsus.GetUpdateApprovals($GroupScope) where ApprovedStates
= "Any" and ApprovedComputerTargetGroups.Add($current_wsus_group). While iterating through $all I grab updates that are older than 30 days and check to see if the updateID exists in my $groupApproved. If it does not, I approve the update. Like I
said before, an explicitly unapproved update for my group does not show up in my $groupApproved. I understand it’s because of my GetUpdateApprovals($GroupScope) being just that and only getting approved for install or uninstall, but even when I try to simply
GetUpdates($GroupScope) I am still not returned explicitly unapproved updates. Below is a screen shot of what I mean by explicitly setting an update to unapproved for a group. I’ve read up on
ApprovedStates and possible enumerated values and it does include "NotApproved" defined as "Includes updates that have not been approved or declined.".
Hope all that makes sense, thanks for the help.

So, I've decided to go about this a different way. Rather than getting all updates and comparing them to approvals via a scope of updates for my specific group (which includes all actions but Not Approved), I am going to look at specific approvals for each
update and see if there is a match for my group. A simplfied version of this is below.
$AnyAllUpdates = $wsus.GetUpdates()
foreach ($udpate in $AnyAllUpdates)
if ($update IsNOTDeclined IsNOTSuperseded LegacyNameNOTIA64 CreationDateLTDATE yada yada yada)
# get the approvals for this udpate as they relate to my group
$uApprovals = $update.GetUpdateApprovals() | ?{$_.ComputerTargetGroupId -eq $wsus_group.Id}
if ($uApprovals)
if ($uApprovals.action -eq "Install")
# do nothing, the udpate was approved for install
elseif ($uApprovals.action -eq "Uninstall")
# do nothing, the update was approved for uninstall
elseif ($uApprovals.action -eq "NotApproved")
# do nothing, the udpate was not approved for install
else
# since there was no specific action then it must be an inherited not approved from teh parent group
# approve the update!

How to add a contact to a specific group in iOS6

Whenever I add a new contact to Contacts (address book), the contact just gets added to default list. Is there an option in iOS6 to add the contact to a specific group within my contacts or to move a contact from one group to another? I know how to do this on my iMac, but do not how to do it on either the iPad or iPhone.

Hi,We are having a problem with one of our users Outlook2013, his Inbox is not showing the count of unread emails.When the PC is booted up you can see the folder flashup with the number of unread emails but then the count quickly disappears. Ihave tried all the solutions mentioned in the below Microsoft Forum, all are temporaryuntil we reboot the PC and start Outlook again, but nothing seems to be permanent.http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-inbox-not-showing-count-of-unread/5fc4f9e0-b3b6-4d51-b599-b4a624e8047d?page=1&tm=1436346526332We are using Exchange 2010 with Outlook 2013, so I am unsure if this iscausing the problem.The user has mentioned that when he is looking at the properties of thefolder throughout the day and selects the Synchronization Tab the Server andOffline folder...

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

How can I share contacts in a specific group

I want to share a specific group of contacts without having to share each of the contacts individually.

iPad
Yes, her contacts show up on her iPad, but only on her iPad
iCloud
She has her own iCloud ID but none of the contacts show up on it because they are in a group called 'Hotmail' and it is impossible on her iPad to change their group to 'iCloud'
Mac
I had already set up an account for her on my Mac, so her iPad is backed up. But when she syncs her contacts to Mail on my Mac, none of the contacts come across, because they are not iCloud contacts.
My question is still how do I get these contacts off the iPad and onto either the cloud or the mac so I can change their group so they sync in future and so that we can send a group email advising her friends and relatives of her change of email address. If this is not possible it means emailing a hundred or so people individually.
How sad that it is not possible on the ipad to select all contacts and assign them to a different group.

Partner functions for a specific customer not seen in XD03 but appears in XD02

Hello SAP Gurus,
I have a situation where a partner functions for a specific customer not seen in XD03 but appears in XD02, In XD03 only one partner function (Ship to) appears but in XD02 (Sold to, Ship to, Bill to and payer appears), from the customer master I can see that account group for this customer has been changes to Sold to (Z001) from Ship to (Z002).
I checked in settings for OB20 transaction for display customer centrally, it is in Display mode as required and not suprresed would like your inputs as to why this is happening and what can be done to fix this.
Thanks and Regards
Mohammed Roshan

Hi ROshan,
Open customer master in XD02 sales view and save it then check in XD03 it should display the partner functions.
As you said the account group has been changed I think the records needs to be saved again.

Curve 8330 won't receive a specific group email.

This is the oddest thing. I have many 8330’s that don’t have this problem but one of them will not receive messages that are in group form.
When we sent out messages to any other group of emails he will get them, but when we send a specific group email, ALL blackberries in the group will receive the email both in their Outlook inbox (We have BES and MES) but he will not receive the email on his 8330.
I’ve wiped the berry and it still does the same thing.
Any one have this happen in the past, and if so, how did you fix it?
Thank you in advance.
Joe

Hey ZoeKool,
Welcome to the forums!
If you have wiped the device then it does not appear to be an issue with the device it self. Which email is this message going to? Is the address that is connected to the BlackBerry included in the group? Does the user have any filters in their Outlook that would move the message to another folder other than the inbox?
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I can't link a specific group of jpgs to an InDesign file, why? How do I fix this?

I can't link a specific group of jpgs to an InDesign file, why? How do I fix this?

I am using Adobe Creative Suite 5. My OS X is 10.9.5. So what happens when I try to link 6 specific jpgs is that they are greyed out and I cannot click to open. In this folder there are 20-30 some other jpgs that are functioning just fine in the document. The 6 jpgs used to be linked to my document but once I updated them and tried to relink they became grey and I am now unable to click them. I exported these 6 jpgs from another InDesign file that is not corrupted but is producing jpgs that are unusable in the creative suite. I can open these jpgs in preview or photoshop even but not InDesign anymore.

Publicate a book at a specific group (not at public group)

Similar Messages

Maybe you are looking for