Publication for salesrep like as Customer & Prospects (by Employee)

Hi.
I would know if there is publication similar to Customer & Prospects (by Employee), but i'd like by salesrep.
I see replication object CAPGEN_OBJ_WRITE, and table smokvbez6 (Interlinkage Cust Cust. AND -Cust - Cont.Pers.). But i don't know if exist and publication for this, o i have to create a new.
Thanks.
Antonio

Hi,
segment field SFAKNA2 is already defined as potential criteria field as you might see when checking the replication object CAPGEN_OBJ_WRITE. It is used for the interlinkage CAP-CON (partners are following the BP).
You might add another criteria field (SFAKNA2 with type D instead of I) to this replication object but I would suggest to use the fields RELTYP and PARTNER2 because then this would be a little bit more generic and especially you won't need to retrieve the SFA guids for all of your sales reps from the database but can use the partner numbers.
Regards,
Wolfhard

Similar Messages

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

Upload transaction data for transactions like KSU2/KSU5,KB31N

We are trying to upload transaction data for transactions like KSU2/KSU5,KB31N etc using batch data processing within LSMW. We are facing couple of problems as mentioned: 
We have to upload data, which has a single header record with 200-300 line items record. How to define target structures to represent header & line items. Currently we are able to upload header data with 1-2 line items depending upon the recording. The present recording gives us option to load 1 line item per document. 
Can excel be used instead of text file for uploading data in LSMW? 
During processing of transaction, User clicks on button and checks a value. Based on this value the future course of action is determined. How can we do the BDC recording or do customization (Write a custom code) 
If errors occur during upload of data, will the processing stop at that line item or will it ignore the error record and continue processing of the remaining data. 
How can we write custom code to modify the data during BDC session and not before session? 
Immediate pointers to this would be very useful. Let me know if more information is required. 
 
Thanks, 
Mehfuze

hi ali,
as for your question related to excel upload via lsmw , please find the below links to be usefull
[Upload of excel file in LSMW]
[Upload excel by LSMW for FV60 ?]
[Upload Excel file through LSMW]
[How upload an excel file using an LSMW.]
regards,
koolspy.

Working on IDOC OUTBOUND FOR Vendor Master and Customer Master

Hi Group,
I need to create IDOC's for Vendor master and customer master using ALE. Whenever they create vendor/customer or changes to vendor/customer should create IDOC's.
Can anyone please help me out how to proceed? I know that we can use CREMAS/DEBMAS and CREMAS04/CREMAS...But I would like to know how to use those.
Thank-You,
Venky

Hi Sai,
Welcome to group.
Related to CREMAS/DEBMAS, for your situation, you can use the change pointers. With this, when ever there is an change/create, it will create an entry in CDHDR & CDPOS and based on that it will create the IDOCs for these.
Activate the change pointers for these message types and run the application RBDMIDOC periodically (whenever you want). This application will create the IDOCs based on your entries.
To activate the change pointers, the TCODEs are
BD50 Checking change pointer is activated for Message Type
BD52 Checking which fields are configured change pointer to create. (please make sure, an entry will exist in BDCP table)
I hope you know the remaining configuration related to partner profile entries (WE20) i.e. to which system you want to send the idocs and Inbound or Outbound etc.
Let me know if you need further info.
shylesh

Got multiple values for non null local custom field

Hi,
I get the following error message while saving a MPP from Project Professional to MS Project Server:
Got multiple values for non null local custom field.
I checked the MPP and found that there are fields with same alias as Enterprise field names. However, these fields are at a Task level, whereas the Enterprise fields are at a Project Level.
I would like to know why this is happening and the resolution for this issue. I don't want to delete the local fields.
Any help in this regard will be appreciated.

Then try to find any inconsistencies in the project plans with the issues, like required values not entered. Also try to save the plan as XML format and save it back as an mpp file to see if it helps (be aware that any formatting will be lost).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Account determination for COGS account by customer

Dear gurus
I’d like to get advice about account determination for COGS account.
I have requirement to determine COGS account based on “Customer”.
If the customer is outside the group, we want to charge to
“Sales: Third-party” and “COGS: Third-party” accounts.
And if the customer is in the group, we want to charge to
“Sales: Intercompan” and “COGS: Intercompany” account.
However, since COGS account is determined from Valuation class in
Material master (OBYC), it cannot be determined from “Customer”.
(Because same material can be sold to third-party and intercompany too)
Do you know any solution for it?
Yoshi

Hi
The only other way I could think of is to do an enhancement at the time of delivery to read the customer and substitute the GL Account for COGS based on Customer recon Account.
The sales can easily be seggregated based on Customer Account Assignment Group in the customer Sales Area. Assuming the material account assignment group is 01 and customer account assignment group are as under:
External Customer 01
Group Customer 03
Now in VKOA you can seggregate the revenue account determination for Group and external customer based on different customer account assignment group.
The only issue is for COGS GL for which you might want to look at Enhancement or Split Valuation that I talked about earlier.
Thanks & Regards
Sanil Bhandari

Customer Prospect in People Centric UI

Hi together,
can somebody explain to me, how to create an iView to create customer prospect in Portal?
I found two OSS-notes where I found the information, that I have to copy the BSP and to add my own view on to the customer (ie. OSS-note 712481).
In the iView "account", of the crm business package, there is called the BSP bsp_frame. In Customizing of the application CRMM_ACCOUNT (which is also defined in the iView) there is the package CRM_BSP_MODEL_IL_BP assigned. In this package I only found only the BSP-Application "crm_prn_acc_ov" - but I think this is not the account BSP.
Have anybody an idea, which BSP-Application I have to copy? Where I'll give in the new iView the information for the new BSP-Application? Which steps I have to do in customizing?
Thanks and regards
Thomas

From OSS-Note 712481:
In the SAP GUI, business partner roles (BP roles) represent different views for a business partner.
This function is implemented in a different way in the People-Centric UI.
SAP delivers the "Account" and "Competitor" People-Centric UI applications with CRM Release 3.1 and CRM Release 4.0 - two views for the business partner. The "Contact person" application represents a special view for the contact person relationship of a business partner.
I'm working with CRM 4.0 and Portal-Application. The proplem is, that I wan't to create(!) business partners in the role prospect (BUP002) and additional in role general (00000). SAP delivers only two iViews one to create business partners in role "sold-to" (CRM001) and one to create competitors (CRM005) (see OSS-Note).
Regards, Thomas
Message was edited by:
Thomas Blasche

Is there a continuous scrolling month view for ical, like outlook?

is there a continuous scrolling month view for ical, like outlook?

Not as far as I know - but maybe things are different in iOS (I'm on OS X)

Key Fields for Vendor as a Customer

Hi experts,
I have to develope report for vendor payment, my senario is as follows
- vendors which are also our customers,
- payments done at every 15 days
- I have to develope the payment summary report for this please tell me which are the key fields to be used for vendor as a customer to develope this report.
- some deductions are carried out in MM side and some are carried in SD side
Regards
Amol

HI,
Vendor Number - LIFNR
Customer Number - KUNNR
These are from table LFA1.
Also from the finance side use tables for payment details regup and reguh
also please check on bsad bsas bsed bseg bses bsik bsis tables.
Thanks& Regards,
Kiran

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks.

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

HT5622 I'm a student exchange from france in USA, I have an apple ID from france and a bank count in france but i want access to the apple store US because I'm here for the year and some app can be interesting for me (like my gym club app) how can i do ?

I'm a student exchange from france in USA, I have an apple ID from france and a bank count in france but i want access to the apple store US because I'm here for the year and some app can be interesting for me (like my gym club app) how can i do ?

you cant. you need a US bank account.

Can't figure out why the "Do this automatically for files like this from now on" is disabled Compressed (zipped) Folders

I recently had to uninstall and reinstall Firefox. Now with the new version it will not allow me to click the check box "Do this automatically for files like this from now on". The line is disabled and a light gray. I went into the Applications tab under options and can't find the Compressed (zipped) Folders file type either.
I download a bunch of files for work and to have to click is going to be the biggest pain. Any help will be greatly appreciated!!

Screenshot:

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each like in version 10.6

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each, like in version 10.6. It used to show the size at the bottom of the "window" for the selected folder,drive etc.

Publication for salesrep like as Customer & Prospects (by Employee)

Similar Messages

Maybe you are looking for