Publications and SAP ECC

Are publications supported when reporting off of SAP ECC using Crystal Reports? I'm trying to figure out how best to handle view time security (row level security and/or object level security) when reporting directly off of ECC tables.

You're correct that the Security Editor or ECC security will work with scheduling, but the security is applied at schedule time and we need to have security applied at view time based upon the user id of the person viewing the report instance. That's why I'm thinking I'll need to use something like Publications to apply additional viewtime security to the instance.
Do Publications support column security like the Universe does? I know it applies row level security but we have a need to suppress certain columns for HR and Financial reporting.
BTW - this all applies to Crystal Reports 2008 only and we're running BO Edge 3.1. Thanks.

Similar Messages

Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
Jochen

SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy

Difference between SAP 4.7EE and SAP ECC 6.0 in terms of ABAP

Hi all,
I would like to know the differences between the SAP-4.7EE and SAP ECC 6.0 in terms of ABAP?
can any body Please Help me?

Hi Vijay,
In terms of ABAP some function modules are obsolete in 4.7.
e.g WS_UPLOAD, WS_DOWNLOAD etc.
You can find the list of obsolete FMs in the table RODIR.
These need to be replaced in the ECC System.
Also ECC is very strict in case of EPC Errors. You need to check the EPC and remove the call function interface errors where it says SLIN observes catching of a runtime error. These might work with no issues in 4.7 but will shortdump in ECC.
If you are doing to a unicode conversion also. you need to check the transaction UCCHECK for unicode errors.
You also need to replace obsolete statements like >< and => , =< etc.
Please let me know if you need any further info on this.
Thanks,
Sai

What are the differences between SAPR/3 4,7EE and SAP ECC 6.0

Hi All,
Can you provide me any doc/info, which provides the differences between SAPR/3 4,7EE and SAP ECC 6.0
Regds
Raj

hi Rajesh,
Difference between sapr/3 4.7 and sapr/3 ecc 5.0:
See https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/a7455fd8-0301-001
All details can be found at http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_O
Regards,
santosh

Connection between Crystal Report and SAP ECC

Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.

Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo

Solution Manager and SAP ECC on same server

Hi Experts,
I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
But can I use same mount folders?
Kindly highlight your experience and knowledge on this point?
Thank you so much
Regards,
LuongDK

>
LuongDK wrote:
> Hi Experts,
>
> I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
> But can I use same mount folders?
>
> Kindly highlight your experience and knowledge on this point?
>
> Thank you so much
> Regards,
> LuongDK
Hello LuongDK,
Please refer to the FAQ section on http://service.sap.com/solutionmanager, Check the installations section:
Which system should I use to install SAP Solution Manager?
The system has to be dedicated to the SAP Solution Manager. No other components can be installed on top of SAP Solution Manager.
SAP Solution Manager does not necessarily require separate hardware. It can be installed as a separate instance on an existing hardware.
This means that the hardware can be shared if it is sufficient to support 2 systems. However a MCOD option is not recommended at all.
Regards
Amit

Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help the client in Data Mapping activity.

Hello All,
Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help in Data Mapping activity.
Thanks,
Mownesh

There are standard templates in HCI data sources.
e.g. 1) Customer Master data template is SOP_MD_CustomerMaster for extracting master data from SAP ECC and load it to S&OP
KNVP is the table for customer in ECC from that you can select the fields as required
KUNNR for customer Number
ADRNR for Address
List of a few commonly used table names of ECC:
Product Related:
MARA – Material Master (MATNR)
MARC – Material Master with Plant Data (MATNR, WERKS)
MARD – Material Master with Storage Location Data (MATNR, LGORT, WERKS)
MAKT – Material Master Material Descriptions (MATNR, MATKL)
MBEW – Material Valuation Data (MATNR, BWTAR)
MVKE – Material Master : Sales related Data
MDKP, MDTB – MRP related Data( Header, Item)
MCHA, MCHB – Material Batches (Header, Item) (MATNR, WERKS, LGORT, CHARG)
Vendor/Supplier related:
LFA1 – vendor data (LIFNR)
LFB1 -- Company Code Segment : Vendor Data(LIFNR, BUKRS)
LFC1 -- FI Related Vendor Data (LIFNR, BELNR)
LFM1 – Pur. Orgn. Related Vendor Data (LIFNR, EKORG)
PReq/PO, BOM Related:
EBAN – Pur. Req. Data( BANFN, BNFPO, BADAT, MATNR)
EINA – Purchase Info. Record(General Data)(INFNR, MATNR, LIFNR)
EINE – Purchase Info. Record (pur. Orgn. Data) (INFNR, EKORG)
ELBK, ELBN, ELBP – Vendor Evaluation Related Data
EKKO – PO Data (Header) (EBELN, BSTYP, BSART)
EKPO – PO Data (Item) (EBELN, EBELP, MATNR)
Pur. Req., RFQ and PO are differentiated by Doc Type (BSTYP) in EKKO table.
For RFQ it is ‘A’ and for PO it is ‘F’
MKPF – GRN Data (Header) (EBELN, BLDAT, BUDAT, XBLNR, BKTXT)
MSEG – GRN Data(Item) MBLNR, BWART, LIFNR, MATNR, EBELN)
Apart from this there are lot of tables which begin with ‘M’ & ‘E’, but we
use the following very often.
EQUK – Quota (Header)(QUNUM, MATNR)
EQUP – Quota (Item) (QUNUM, QUPOS, LIFNR)
EKBE – PO History Data (EBELN, EBELP, BELNR, BLDAT, MATNR, VGABE)
EKBZ – PO History with Delivery Costs(EBELN, BELNR, LIFNR, XBLNR)
EKET – Schedule lines data of a PO(EBELN, EINDT, SLFDT)
EKES – Vendor Confirmations Data (EBELN, EBTYP, EINDT, XBLNR)
T163F – Confirmation Texts (EBTYP, EBTXT)
T156 – Movement Types (BWARE)
T024 – Purchasing Groups
T024E – Purchase Organizations
T163 – Item Category’s in Purchasing Documents(PSTYP)
T149D – Valuation Types
T134 – Material Types
FVLK – Delivery Types
STKO, STPO – BOM(Bill Of Material) related Data (Header & Item)
STPU, STPN, STST, STZU – BOM Related Tables
RKPF, RBKP, RSEG (Header & Item) – MM – FI Related Data
KONO, KONH – Pricing data
T006 – Basic Unit Of Measurements
Customer/Sales Order Related:
VBAK : Sales Document(Header Data) (VBELN)
VBAP : Sales Document(Item Data) (VBELN, POSNR, MATNR, ARKTX, CHARG)
Enquiry, Quotation, Sales Order are differentiated based on Doc.
Type(VBTYP Field) in VBAK, VBAP Tables for Enquiry VBTYP = A, for Quotation ‘B’ & for Order it is ‘C’.)
LIKP : Delivery Table(Header Data) (VBELN, LFART, KUNNR, WADAT, INCOL)
LIPS : Delivery Table(Item Data)(VBELN, POSNR, WERKS, LGORT, MATNR, VGBEL)
(LIPS – VBGELN = VBAK- VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK : Shipment Table(Header Data) (TKNUM)
VTTP : Shipment Table (Item Data)(TKNUM, TPNUM, VBELN)
(VTTP – VBELN = LIKP – VBELN)
VBRK : Billing Table(Header Data) (VBELN, FKART, BELNF)
VBRP : Billing Table(Item Data) (VBELN, POSNR, FKIMG, NEWR, VGBEL, VGPOS)
(VERP – AUBEL = VBAK- VBELN, VBRP – VBEL = LIKP – VBELN)
Apart from these tables there are lot of other tables which starts with ‘V’, but we use the
following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header) (VBELN, VBTYP)
VBTYP = ‘C’ (Sales Order) VBTYP = ‘L’(Delivery) VBTYP = ‘M’(Invoice)
VBUP: Sales Documents status & Admin. Data(Item) (VBELN, POSNR)
VBEP : Sales Document Schedule Lines Data (VBELN, POSNR, EDATU, WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
VBFA: Sales Document flow data(VBELV, VBELN, POSNV, VBTYP)
VBPA: Partner functions Data(VBELN, PARVW, KUNNR, LIFNR)
TVLKT: Delivery Type: Texts(LFART, VTEXT)
KNA1, KNB1, KNC1 : Customer Master Data and Other Partner’s Data(KUNNR,
NAME1,LAND1)
KNVK: Customer Master Contact Person(PARNR, KUNNR)
KNVV: Customer Master Sales Data.
LFA1, LFB1, LFC1: Vendor Master Data(To get Transporter data)(LIFNR, NAME1, ORT01)
MARA, MARC, MARD : Material Master Data(Basic, Plant, St. Location Views)
TVKO: Sales Organizations(VKORG)
TVKOV: Distribution Channels(VTWEG)
TVTA: Divisions(SPART)
TVKBZ: Sales Office(VKBUR)
TVBVK: Sales Group(VKGRP)
T077D: Customer Account Group(KTOKD)
T001W: Plants(WERKS)
T001L: Storage Locations(LGORT)
TWLAD: To get address of Storage Location and Plant(LGORT, ADRNR)
TVAU: Sales Document (Order) Types
KONV: Condition Types (pricing) (KNUMV, KSCHL, KWETR)
T685T: Condition Types Texts.
ADRC: To get Addresses of Partners
VBBE, VBBS: Sales Requirements Data
VBKA: Sales Activities Data
VBPV: Sales Document Product Proposal
Based on the functionality you can search ECC table names and fields
Hope this information is helpful for you.
Thanks and Regards,
Anjali

No Connection btw JCAPS 5.1.2 and SAP ECC 6.0 whle creatining SAP/Bapi OTD

Hello.
We have the following problem trying to build SAP BAPI/RFC OTD.
1) JCAPS 5.1.2. SAP ECC 6.0. Jco version 2.1.7 (also tried 2.1.8, 2.0.12 with the same result). All steps were done according to SAP BAPI/ALE eWays user guides and readmes
2) SAP client already installed and worked ok on the same host as the JCAPS
3) It looks like the problem is in JCo. It seems like doesn't react when we trying to connect to SAP during creation of BAPI/RFC OTDs at design time.
Error message: partner not reached
ERRNO 10060
All ports are open and no restrictions imposed on JCAPS server. There are no connection log entries on SAP router host.
4)We tried to run sample Project which goes with eway, and the following entries in logical host log file were found:
[#|2007-06-12T11:35:13.171+0600|WARNING|IS5.1.2|STC.eWay.SAP.BAPI.com.stc.connector.sapbapiadapter.sapbapi.SAPConnector|_ThreadID=17; ThreadName=Worker: 5;|SAPConnector.isConnect(): JCO Client is null|#]
[#|2007-06-12T11:35:13.296+0600|INFO|IS5.1.2|STC.eWay.framework.management.com.stc.connector.management.util.Alerter|_ThreadID=17; ThreadName=Worker: 5;|sendAlert(), connection info: ConnectionInfo [ collaboration: cmBAPIOutbound_jcdFlightGetList, project: prjBAPIOutbound, component: eaSAPBAPI, deployment: dpBAPIOutbound, environment: envTest, logicalhost: LogicalHost1, integration server: IntegrationSvr1 ], monitor: ObjectReference [ name: SeeBeyond:GUID={70010000-D247521E130100-AC14015A-01},Name=prjBAPIOutbounddpBAPIOutbound|prjBAPIOutbound|dpBAPIOutbound|cmBAPIOutbound_jcdFlightGetList_eaSAPBAPI ], alert message: No connection established to SAP R/3 for user $$$$$$ on host $$$$$.|#]
[#|2007-06-12T11:35:13.312+0600|WARNING|IS5.1.2|STC.eWay.SAP.BAPI.com.stc.connector.sapbapiadapter.sapbapi.SAPConnector|_ThreadID=17; ThreadName=Worker: 5;|SAPConnector.isConnect(): JCO Client is not connected.|#]
[#|2007-06-12T11:35:34.781+0600|INFO|IS5.1.2|STC.eWay.framework.management.com.stc.connector.management.util.Alerter|_ThreadID=17; ThreadName=Worker: 5;|sendAlert(), connection info: ConnectionInfo [ collaboration: cmBAPIOutbound_jcdFlightGetList, project: prjBAPIOutbound, component: eaSAPBAPI, deployment: dpBAPIOutbound, environment: envTest, logicalhost: LogicalHost1, integration server: IntegrationSvr1 ], monitor: ObjectReference [ name: SeeBeyond:GUID={70010000-D247521E130100-AC14015A-01},Name=prjBAPIOutbounddpBAPIOutbound|prjBAPIOutbound|dpBAPIOutbound|cmBAPIOutbound_jcdFlightGetList_eaSAPBAPI ], alert message: Connection to SAP R/3 failed for user $$$$$$ on host $$$$$$.|#]
[#|2007-06-12T11:35:34.781+0600|SEVERE|IS5.1.2|STC.eWay.SAP.BAPI.com.stc.connector.sapbapiadapter.sapbapi.SAPConnector|_ThreadID=17; ThreadName=Worker: 5;|Unable to initialize SAP R/3 Client Connection|#]
Any help is appreciated

Hi Yermek.
I guess you are placed and set all jars relates to bapi/rfc.
You need to pass atleast one parameter from jcd which will initiates the BAPI connection.
i.e atleast from jcd you need to send a request.
Hope it will work...
Thanks,
M.P.Rao.

IDoc via RFC problem between certified app and SAP ECC 5.0 on AS/400

Greetings.
I'm not sure this is the best forum for this question but here it goes:
Ever since 2000, we have our certified application for HR-PDC interface. We never had any problem that would be hard to resolve.
Recently, we had a customer who installed our app to exchange data with SAP ECC 5.0 on an AS/400 machine (first time interfacing with this platform for us).
We already checked all user permissions and every SAP note that mentioned this problem but it still doesn't work: when receiving and IDoc (just any), we get the error IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN.
Permissions for user are SAP_ALL and SAP_NEW and the IDocs used are the ones stated in the HR-PDC interface (for example, HRCC1DNPERSON, for instance).
I traced down the problem by examining the .trc files (RFC trace files) and I found where the problem lies: IDOCTYPE_READ_COMPLETE is being passed the IDoc Basic Type HRCC1DNPERSON and it should be HRCC1DNPERSON01. I did the same tracing for another installation (not AS/400 with SAP 4.6) and everything goes fine: IDOCTYPE_READ_COMPLETE is called with correct HRCC1DNPERSON01.
I'm wondering if this could be a problem in SAP 5.0 for AS/400 as we already have other customers running the same version on different platforms and everything just goes fine.
Any clues, anyone?
Thanks and regards,
André Baptista

hi
we have a similary problem with our certified as400 application. Our client has the version 4.6C service pack 51 and patch 2161. Data transfert by RFC is ok but we have problems since the installation of the patch 2252. The RFC function RFCaccept do not run any more : the log
<i>argc    = 2
argv[0] = 'HLSAP45A/HLKA15C'
argv[1] = '-DCP03'
Fri Nov 24 14:21:53 2006   *
<== RfcAccept                           rfc_handle = RFC_HANDLE_NULL
<== RfcLastError
RFC operation/code: RfcAccept
ERROR/EXCEPTION
key     : RFC_IO5
status : CODE=CM_PRODUCT_SPECIFIC_ERROR STATUS=??? DATA=??? ID=???
message : LOCATION    CPIC (TCP/IP) on local host
ERROR       connection to partner broken
TIME        Fri Nov 24 14:21:53 2006
RELEASE     45A
COMPONENT   NI (network interface)
VERSION     31
RC          -6
MODULE      nio4i.c
LINE        891
DETAIL      NiPRea
internal: IO HANDLE=1 DRV=??? LINE=1369 CODE=5
<== RfcClose </i>
Do you have solve your problem ?
thanks

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

Technical differences between SAP Enterprise and SAP ECC 6.0

Hi,
Can anyone plz tell me what will change technically after the upgrade from SAP Enterprise to SAP ECC 6.0, in respect to reports, module pool programming and other technical logics?
Thx,
KK

Difference b/t ABAP4.7 and ECC6.0.
Difference between R/3 4.7, ECC5 & ECC6 anyone?
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
See this weblog:
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/instguides
http://service.sap.com/erp
http://www.stonewayinc.com/clients/sap/bestoftour/presentations/SAP_BOT_2_Furlan_IBM.ppt
From the ABAP perspective, few differences are.
The WS_* function modules used in 4.6c has become obsolete from 4.7C. All the WS_* FMs have been replaced by GUI_* FMs.
(ii) Concept of Unicode is introduced.
(iii) Few tables have been modified in ECC6.0.
Tables TVARV & TTREX have been replaced by TVARVC & TTREXN respectively.
(iv) we have enhancement points and enhancement sections along with enhancemnts and BADI'S . and we can write the part of code in those points.
For functional differences please check out the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/
ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
Reward points for useful Answers
Thanks
Murali Poli

SAP XI scenarios (SAP Solution Manager and SAP ECC 6.0)

Hi!
I have a SAP Solution Manager System 7.0 (ABAP+Java) and SAP IDES ECC 6.0 (ABAP).
Futhermore I have SAP NetWeaver 7.0 with SAP XI 7.0.
Which scenarios can I implement with these systems and where can I find the appropriate documentation?
- Proxy to Proxy
- IDOC/ALE
- Webserice
- other scnenarios (???)
Thank you very much!
regards
Holger

Hi Holger,
Please do search in SDN you might get more.......
Proxy to Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Proxy to File
File to R/3 via ABAP Proxy - File to ABAP Proxy
IDOC/ALE
Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
Few other scenarios :
File to R/3 via ABAP Proxy - File to ABAP Proxy
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) - File to File Part 1
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) - File to File Part 2
Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
RFC Scenario using BPM --Starter Kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
Dynamic File Name using XI 3.0 SP12 Part - I - Dynamic File Name Part 1
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - Dynamic File Name Part 2
The specified item was not found. - Dynamic Mail Address
Understanding message flow in XI - Message Flow in XI
Walkthrough with BPM - Walk through BPM
Schedule Your BPM - Schedule BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
The specified item was not found. - Maintain RFC destination centrally
Triggering e-Mails to Shared folders of SAP IS-U - Triggering Email from folder
Outbound Idoc's - Work around using "Party"? - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
The specified item was not found. - Testing of integration process
The specified item was not found. - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
The specified item was not found. - Alert Configuration
The specified item was not found. - Trouble shoot alert config
Executing Unix shell script using Operating System Command in XI - Call UNIX Shell Script
Overview of Transition from Dev to QA in XI - Transport in XI
Using ABAP XSLT Extensions for XI Mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
XI : Controlling access to Sensitive Interfaces - Controlling access to Sensitive Interfaces
The specified item was not found. - The same filename from a sender to a receiver file adapter - SP14
Payload Based Message Search in XI30 using Trex Engine - Payload Based Message Search in XI30 using Trex Engine XI : Configuring CCMS Monitoring for XI- Part I - XI : Configuring CCMS Monitoring for XI- Part I
The specified item was not found. - XI: HTML e-mails from the receiver mail adapter
Thanks
Prabhakar

Master Data in SAP SRM and SAP ECC

Hi all,
I have the following question: after I create a vendor in SAP ECC and, than, I replicate it in SAP SRM (through transaction BBPGETVD):
1. if I modify all field of vendor on SAP ECC, is there an
   authomatic way which update vendor data on SAP SRM, or
   it is possible only through BBPUPDVD transaction?
2. if I modify all field of vendor on SAP SRM, is there an
   authomatic way which update vendor data on SAP ECC, or is it possible through some transaction?If yes, what is it?

Hi Maria,
You can execute BBP_VENDOR_GET_UPDATE_JOB report using SA38 txn. to automatically replicate vendors from R/3 to SRM.
Schedule a back ground job for this report depending upon the frequency of update that is every day or every hour based on your requirement.
The report BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
Make the Global settings for vendor replication and synchronization in SPRO
SPRO -- > IMG ---> Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
There is no automatic way for updating vendors in R/3 after making changes in SRM.
Hope this makes you more clear. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Latest Support Packs for integration of SAP XI 7.0 and SAP ECC 6.0 Retail

Hi,
We are integrating SAP ECC 6.0 for IS-Retail System with SAP XI 7.0. I would like to know what lastest Support Packs should present in both the Systems for proper integration, without any technical errors in future.
Regards,
Balaji

Hi,
The latest Support Pack for PI 7.0 is now SP 14
You can confirm this from SAP service market.
https://service.sap.com/swdc
Thanks
Swarup

SAP BODS and SAP ECC integration for Sales data

Hi Folks,
I have a requirement to load sales data from BODS into SAP ECC. Could you please suggest me a best approach for this?
I really appreciate your prompt response.
Thanks,
Daniel.

Hi Daniel
What sales data you want to migrate?. Like
1) Customer master
2) Pricing Condition
3) Sales Order
4) Customer Sales Area
5) Scheduling Agreement
6) Schedule Lines
7) Customer Material Info Records
What you want to migrate. Evyerything is possible only by IDOC's if the volume of data is less( < 100000). If its more they the best option is only by BAPI method.
please provide the exact requirement then we can through some light on it.
Regards
Vijay Mukunthan

Publications and SAP ECC

Similar Messages

Maybe you are looking for