Publish a project in a managed servers
How to publish a project, through OEPE, in a managed servers?
I am using OEPE 11.1.1.6.1.
It's is possible with OEPE 11.1.1.7.2.
I recommend that you upgrade your OEPE version.
Similar Messages
-
How to publish OSB project to other managed servers?
How to publish OSB project to other managed servers
Edited by: 991757 on 2013-3-4 下午6:09Not required to be published.
-
Error while starting managed servers in a cluster
Hi,
I have Weblogic 8.1.3 deployed on my system. We've have a Ant script that set's up the project domain etc. We have an admin server and two other managed servers which are part of a cluster. I am able to start the admin server and access the admin console without any errors. However when I start any of the managed servers in the cluster, using the following command (startManagedWebLogic.cmd Reactor-1 http://localhost:80 OR startManagedWebLogic.cmd Reactor-2 http://localhost:80)
I get the error listed below. The same Ant script was used to setup the project on another system and it worked but I haven't been able to set it up on my system.
The error says that it could be due to servers having duplicate names in the cluster but thats not the case here, the managed servers are named Reactor-1 and 2.
Also, the IP address being accessed, 192.168.141.50:81 is not my system, its another system on the network. I've done a full text search for the IP address but I've not been able to find it in ANY file under c:\bea.
Can someone please tell me if I've missed something? I'd appreciated any help with this.
Thanks
Ameeth
<Mar 21, 2005 4:52:43 PM GMT+05:30> <Notice> <Cluster> <BEA-000142> <Trying to download cluster JNDI tree from server Reactor-1
.>
<Mar 21, 2005 4:52:44 PM GMT+05:30> <Warning> <Net> <BEA-000905> <Could not open connection with host: 127.0.0.1 and port: 81.>
<Mar 21, 2005 4:52:44 PM GMT+05:30> <Error> <Cluster> <BEA-000141> <TCP/IP socket failure occurred while fetching statedump ove
r HTTP from Reactor-1.
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '127.0.0.1', port: '81'
at weblogic.net.http.HttpClient.openServer(Ljava.lang.String;I)V(HttpClient.java:275)
at weblogic.net.http.HttpClient.openServer()V(HttpClient.java:329)
at weblogic.net.http.HttpClient.<init>(Ljava.net.URL;Lweblogic.security.SSL.SSLClientInfo;Lweblogic.security.SSL.SSLSoc
ketFactory;I)V(HttpClient.java:128)
at weblogic.net.http.HttpClient.New(Ljava.net.URL;Lweblogic.security.SSL.SSLClientInfo;Lweblogic.security.SSL.SSLSocket
Factory;I)Lweblogic.net.http.HttpClient;(HttpClient.java:196)
at weblogic.net.http.HttpURLConnection.connect()V(HttpURLConnection.java:119)
at weblogic.cluster.MemberManager.waitForSync(J)V(MemberManager.java:213)
at weblogic.cluster.MemberManager.waitToSyncWithCurrentMembers()V(MemberManager.java:160)
at weblogic.cluster.ClusterCommunicationService.initialize()V(ClusterCommunicationService.java:58)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:924)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String)V(Server.java:32)
>
<Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias DemoIdenti
ty from the jks keystore file C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
<Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias D
emoIdentity from the jks keystore file C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
<Mar 21, 2005 4:52:47 PM GMT+05:30> <Warning> <WebLogicServer> <BEA-000311> <Attempting to use low strength (exportable) certif
icates with a full strength (domestic) license.>
<Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C
:\bea\weblogic81\server\lib\DemoTrust.jks.>
<Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C
:\bea\JROCKI~1\jre\lib\security\cacerts.>
<Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "SSLListenThread.Default" listening on port
7002, ip address 127.0.0.1>
<Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 81,
ip address 127.0.0.1>
<Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <Cluster> <BEA-000102> <Joining cluster ReactorCluster on 237.0.0.1:7001>
<Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000332> <Started WebLogic Managed Server "Reactor-1" for dom
ain "ReactorAdminServer" running in Development Mode>
<Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Mar 21, 2005 4:52:51 PM GMT+05:30> <Warning> <Net> <BEA-000905> <Could not open connection with host: 127.0.0.1 and port: 82.>
<Mar 21, 2005 4:52:52 PM GMT+05:30> <Error> <Cluster> <BEA-000141> <TCP/IP socket failure occurred while fetching statedump ove
r HTTP from 8288749592481618145S:localhost:[81,81,-1,-1,81,-1,-1,0,0]:192.168.141.50:81,192.168.141.50:82:ReactorAdminServer:Re
actor-1.
java.io.IOException: Reference to server no longer exists.
Possible reasons for failure include having servers with duplicate names running on a cluster. Please check your configuratio
n for this error.
at weblogic.rmi.cluster.ServerInfoManager.updateServerInfo(Lweblogic.rmi.cluster.ServerInfo)V(ServerInfoManager.java:1
11)
at weblogic.rmi.cluster.ServerInfoManager.readUpdate(Ljava.lang.Object)V(ServerInfoManager.java:95)
at weblogic.cluster.MemberAttributes.readExternal(Ljava.io.ObjectInput)V(MemberAttributes.java:103)
at java.io.ObjectInputStream.readExternalData(Ljava.io.Externalizable;Ljava.io.ObjectStreamClass)V(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unknown Source)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown Source)
at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Source)
at weblogic.cluster.HTTPExecuteRequest.execute(Lweblogic.kernel.ExecuteThread)V(HTTPExecuteRequest.java:91)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest)V(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread)V(Unknown Source)make sure you use a unique cluster multicast ip address. are you sure that your etc/hosts file has proper entries for localhost?
-
Creation of Managed servers using WLST on two different machines
Hello,
I am looking for a use case, where i need to create two managed servers to running admin servers
condition 1: Adminserver and managed_server1 will be in same machine.
codition 2: managed_server2 will be in other machine.
Example: AdminSever and managed_server1 will be in the 10.10.10.101 and Managed_server2 will be in 10.10.10.102
I have a code which will create two managed servers in a same machine. How can i modify this code???
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.*;
import weblogic.management.scripting.utils.WLSTInterpreter;
import org.python.util.InteractiveInterpreter;
public class EmbeddedWLST
static InteractiveInterpreter interpreter = null;
EmbeddedWLST()
System.out.println(“Inside the constructor()”);
interpreter = new WLSTInterpreter();
private static void connect()
System.out.println(“Inside the Connect method()”);
StringBuffer buffer = new StringBuffer();
buffer.append(“connect(‘weblogic’,’1qaz2wsx’,'t3://localhost:7001′)”);
System.out.println(“After Connect method()”);
interpreter.exec(buffer.toString());
System.out.println(“at the end of conenct method”);
private static void createServers()
System.out.println(“Inside the CreateServer method()”);
StringBuffer buf = new StringBuffer();
buf.append(startTransaction());
buf.append(“man1=create(‘msEmbedded1′,’Server’)\n”);
buf.append(“man2=create(‘msEmbedded2′,’Server’)\n”);
buf.append(“mach=create(‘machineEmbedded’,'Machine’)\n”);
buf.append(“clus=create(‘clusterEmbedded’,'Cluster’)\n”);
buf.append(“man1.setListenPort(8001)\n”);
buf.append(“man2.setListenPort(9001)\n”);
buf.append(“man1.setCluster(clus)\n”);
buf.append(“man2.setCluster(clus)\n”);
buf.append(“man1.setMachine(mach)\n”);
buf.append(“man2.setMachine(mach)\n”);
buf.append(endTransaction());
//buf.append(“print Script ran successfully … \n”);
interpreter.exec(buf.toString());
private static String startTransaction() {
StringBuffer buf = new StringBuffer();
buf.append(“edit()\n”);
buf.append(“startEdit()\n”);
return buf.toString();
private static String endTransaction() {
StringBuffer buf = new StringBuffer();
buf.append(“save()\n”);
buf.append(“activate(block=’true’)\n”);
return buf.toString();
public static void main(String[] args) throws IOException
System.out.println(“inside the main “);
Runtime rt2 = Runtime.getRuntime();
Process pr2 = rt2.exec(“cmd /c C:\\Oracle\\Middleware\\wlserver_10.3\\server\\bin\\setWLSEnv.cmd “);
BufferedReader br = new BufferedReader(new InputStreamReader(pr2.getInputStream()));
String line = “”;
while ((line = br.readLine()) != null)
System.out.println(line);
new EmbeddedWLST();
connect();
createServers();
Help me out please.
Thanks,
AlokHi Shane --
Yes, they were installed from the same disk (I'm pretty sure I did a software update on both but will double-check tonight).
When I try to Import the project, it is grayed out in the 'Choose a File' window. If I double-click the project from the Finder, I get "General Error (41)" -- which is a different one than when I tried it yesterday (when I had no other sequences active).
Also something weird today -- although the edited footage is all linked fine & plays properly, in the timeline most of the footage shows the red "Media Offline" frame for its thumbnail.
Any ideas?
Many thanks!!
-- Sean -
Hi All
When creating and publishing a project in PWA(server 2010) need to send a mail alert to the concerned project manager.
How can i achieve this..
I have configured the outgoing mail sending in sharepoint and its working fine now.
Please help me..
Thanks Advance
SharePoint Module Lead Assyst International Private Ltd Cochin IndiaNothing is built in Project Server to do this for you automatically.
They way I have done this in the past is to create a SQL job using SSIS. It runs every hour and when it sees a project schedule that has a recent PUBLISHED date then this is a trigger to send an email to project manager.
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
I'm using a Mac. After swithcing to ICloud will I be able to use IWeb to upload and publish my sites hosted by other servers like Prohosting ?
iWeb has two other ways to publish your site...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and the second method allows you a choice of how you upload the files...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
Here's a publishing workflow checklist...
http://www.iwebformusicians.com/Search-Engine-Optimization/Website-Publishing-Wo rkflow.html
The MobileMe only features can be replaced by alternatives...
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
If you have folders of assets outside of the main website folder on MobileMe, download them from the Apple server. From the Finder Go menu, follow the path iDisk/My iDisk/ to get there. Your website files are in the Web/Sites folder. Drag any files/folders onto the desktop.
Use an FTP application to upload these assets to the root folder on your new server...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
...and change the relevant URLs to...
http://www.domain-name.com/Folder-Name/file-name.file-extension
There are lots of options for hosting for about half the cost of MobileMe...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you have been using a web.me.com domain name, you need to register a new one. Most hosting services give you at least one free and registering with your hosting company will make forwarding and managing it a lot easier.
Make sure you add the new name to Google and create, upload and enter a new sitemap.xml...
http://www.iwebformusicians.com/Search-Engine-Optimization/SEO.html
If you have inbound links on other sites...
http://www.iwebformusicians.com/Search-Engine-Optimization/Inbound-Link.html
... remember to inform the webmasters of you new URL.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
Project Professional 2010 Not Publishing to Project Server 2010
I am having trouble publishing a project from Project Professional 2010 to the Project Server 2010 (PWA). What I am trying to publish is a master project which is contains many enterprise projects as subprojects. When I press publish, it prompts me
to save and if I click yes then it goes through and saves all the subporjects and then just stops there and doesn't publish the changes to the master project. If I press publish and click no to the save prompt then it gives me the status "sychronizing
data to server" for around 15 seconds and then just does nothing after the sychonization finishes.
It usually should be giving a "publishing job done 0%" or "publishing job completed" when it publishes, but it gives nothing like that. I also check the project through the PWA and it has not updated yet, but when I open it for editing in the client it has
everything updated and up to date, meaning that the save is working properly and just not the publishing.
All my subprojects are able to publish correctly, it's just this master project that is not working.
Does anyone know why this is happening? Is the publishing process timing out for some reason? Or is it something else?
Please help.
EDIT: The progress notification at the bottom of Project Professional just stops at "save completed sucessfully" whenever I try to publishTo check the queue, navigate to Server Settings > Manage Queue and view the jobs that are present. If there is an error when publishing you should see it in the queue.
Alex Burton
www.epmsource.com |
Twitter
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page -
How many managed Servers do you need?
Hi,
One thing that has come up time and time again, is when trying to think about a new project and a new WL domain, is trying to know how many WL Managed Servers do you need?
Does BEA have some sort of metrics which says ok for this amount of input we recommend you having 4 managed servers on 4 single boxes?
And is there think on have 2 managed servers on 1 box or 2 managed servers on two boxes?
Any Help Appreciated.
Kind Regards,
Alistair.Hi :-D
I don't believe BEA have guide lines on how many Managed servers are required based on Metrics. You could look at some performance evaluations but it's really only relevant if your application acts in the same way.
Cheers,
Doug. -
Managed servers on multiple platforms?
Hi,
I was wondering if all of my managed servers in a Weblogic domain have to be running on the same platform. For example, can I mix Solaris/SPARC and Linux/x86 boxes within the same domain such that some remote managed servers in the domain are different? In the WL documentation, it mentions that all WLS instances in a domain must be running the same version of WLS itself, but it doesn't mention the underlying OS or hardware. I'm assuming that since everything is running in a JDK, it's OK to do, especially since I'm using a generic WLS installer for UNIX platforms.
Install WebLogic Server on the machines on which you want to host Managed Servers for the WebLogic domain.
Note:
All WebLogic Server instances within a WebLogic domain must run the same version of the WebLogic Server software.
Thanks in advance for your help.Hi Kent,
It should work fine.
This kind of mixes are generally not recommended in order to avoid conflicts due to packages specific for each OS, but should not be the case of the generic installer.
The generic installer is truly generic to all OS platforms. Note that you must comply with the published supported platforms (OS, chip set, etc).
Sinice Java is platform independent, there is no distinction between a Java application running on Linux and the same application running on Windows. A Java application is the same and can be run on any OS bit version of any flavor without a single change.
At its root, WebLogic Server is a Java application, nothing more, nothing less. So, think of WebLogic Server as a Java application that is run like any other Java application by invoking the main method. In WebLogic Server the main method is in the weblogic.Server class. So, to start WebLogic Server we use the java command, the same as for any other Java application:
java <MEM_ARGS> -cp <CLASSPATH> <JAVA_OPTIONS> weblogic.Server
As mentioned in your post, make sure the JVM is the same (JVM mixtures in a cluster are not supported).
-Cris -
Publishing RoboHelp projects using third-party app and RH command prompt
Hi -
I am curious to know if anyone has used the RH command prompt to publish a RH project using a third party application - i.e. homegrown app?
I'm thinking of creating an application that will allow RH users register their projects for knowledge management purposes. It would act somewhat like an LMS where users could post their dev files on a network share. When ready to review with the customer, the would use the registration tool to push the project to preview. The app would call the RH command prompt using a server side technology, in my case .NET, and supply the necessary arguments and push the generated project to preview. Once it had been reviewed and ready, then the user could push to production.
Any thoughts on this - reasons why this wouldn't work, good, bad, ugly, alternatives? - all constructive comments welcome
ThanksHi there
I see some flaws with that.
J41 wrote:
It would act somewhat like an LMS where users could post their dev files on a network share.
Dev files need to always be local. Placing on a network share for the purposes of using RoboHelp to compile or generate is risky business and may explode in your face. LMS to me means Learning Management System. Those are typically used for eLearning. RoboHelp does help systems. Captivate does eLearning. So you are losing me with your LMS reference.
When ready to review with the customer, the would use the registration tool to push the project to preview.
I'm lost. What "registration tool" are you even referring to here? Or is this what you are planning on creating and that's what you are choosing to call it?
The app would call the RH command prompt using a server side technology, in my case .NET, and supply the necessary arguments and push the generated project to preview.
There is no "preview" of projects. Preview of individual topics, sure. But not for a project. There is only compile or generate to create the final output.
Once it had been reviewed and ready, then the user could push to production.
Sounds like what one might typically accomplish using RoboHelp in a typical development cycle. You edit content on the local hard drive. If a review is needed, you compile or generate the content and place the output on a server. After approval is complete the content is then copied to the production server.
Sure sounds like you are attempting to reinvent the wheel in many situations here.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Error when publishing BPM project to MDS
Hello everyone,
I get this error when I try to publish a BPM project to MDS : Error while publishing BPM project to MDS: 'BPM-70800: An I/O error occurred'
I use SOA/BPM 11g version 11.1.1.4.
Thank in advance for your answer
BilelHello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km -
. Error ID 23000 - when trying to publish a project.- Project Server 2013
Error:
Your queue job ProjectPublish failed. Please contact your administrator for assistance
Your ProjectPublish job failed. Its current state is Failed. It was 0% complete. It entered the queue at 06/05/2013 16:09:42.
To get more information about the job failure, please go to Project Web App. Select Personal Settings from the left menu. Then select My Queued Jobs.
The errors returned from the queue are as follows:
Error ID: 23000
Error ID: 26000
Detailed error below - send it to the administrator for more detailed troubleshooting.
<?xml version="1.0" encoding="utf-16"?>
<errinfo>
<general>
<class name="Microsoft.Office.Project.Server.BusinessLayer.Queue.Message">
<error id="23000" name="ProjectPublishFailure" uid="7abaf2fb-f1cd-e211-940c-00155d0c1708" projectuid="494fbfae-c1b8-e211-9359-08edb9db97cb" messagetype="Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.SynchronizeTaskListInManagedModeMessage"
messageID="38" stage="" blocking="Block" />
</class>
<class name="Queue">
<error id="26000" name="GeneralQueueJobFailed" uid="7bbaf2fb-f1cd-e211-940c-00155d0c1708" JobUID="ddafa1ed-f1cd-e211-a5f3-001d0925b148" ComputerName="75cc0cd2-d97d-405c-9115-7722945b1400"
GroupType="ProjectPublish" MessageType="SynchronizeTaskListInManagedModeMessage" MessageId="38" Stage="" CorrelationUID="fc70229c-ba49-90cf-b140-0bba2cbd6e91" />
</class>
</general>
</errinfo>
You can do the following:
1. Try troubleshooting using the error IDs, error XML.
2. Contact administrator with your jobID (ddafa1ed-f1cd-e211-a5f3-001d0925b148) and error XML.
To turn off these notifications, go to PWA Settings, and then click Manage My Alerts and Reminders.
From this page, you can clear the check box for those notifications you no longer want to receive.
Microsoft Project Server
---=======----
Any Suggestion / Help is greatly apprciated
AlimWe get a very similar message when we publish our projects (not project specific and no resources assigned to summary level tasks):
Your ReportingWSSSync job failed. Its current state is FailedNotBlocking.
It was 0% complete. It entered the queue at 06/10/2014 17:00:56.
To get more information about the job failure, please go to Project Web App.
Select Personal Settings from the left menu. Then select My Queued Jobs.
The errors returned from the queue are as follows:
Error ID: 24018
Error ID: 24016
Error ID: 26000
Detailed error below - send it to the administrator for more detailed troubleshooting.
<?xml version="1.0" encoding="utf-16"?>
<errinfo>
<general>
<class name="Reporting Wss list sync failed">
<error id="24018" name="ReportingWssSyncListFailed" uid="f8900f4b-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="aa162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="b3162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="bf162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="c8162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="d1162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
</class>
<class name="Reporting message processor failed">
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="fb900f4b-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="ad162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="b6162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="c2162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="cb162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="d4162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
</class>
<class name="Queue">
<error id="26000" name="GeneralQueueJobFailed" uid="d5162251-e2f0-e311-80d4-005056a93b51" JobUID="ec900f4b-e2f0-e311-80d4-005056a93b51" ComputerName="54374067-1d9a-4ecf-8b03-917d8b538489" GroupType="ReportingWSSSync"
MessageType="WSSSyncMessageEx" MessageId="1" Stage="" CorrelationUID="1e9c999c-6bad-d0e0-95e7-d44efff43e4b" />
</class>
</general>
</errinfo>
Any help would be greatly appreciated!
Todd -
External Variable Null Pointer Exception when I publish two projects
I have the following external variables exception thrown when I publish two projects alongside each other. These projects share the majority of there 50 odd project variables. (I know that this is a bit excessive but the customer wants to be able to search under this many variables). I have checked and found that there are not any differences in the variables across the two projects.
This exception is brought up when the second of the projects is published, no matter which way around they are published. In two incidences, out of about 30, I have managed to deploy this code without this problem occuring.
I am using ALBPM Studio Version: 6.0.5 Build: #97234 and ALBPM Enterprise Version: 6.0.5 Build: #97234. I am deploying these to a Sun Solaris 10 environment with an Oracle 10G database.
I would be very grateful for some assistance with this problem.
Process '/NCTSProcess#Default-1.0' could not be started. Details:\njava.lang.NullPointerException
java.lang.NullPointerException
at fuego.metadata.execution.ExternalVariable.getDirectoryVarName(ExternalVariable.java:46)
at fuego.metadata.execution.DeploymentInformation.addExternalVariable(DeploymentInformation.java:201)
at fuego.metadata.execution.compiler.ModelVariableCompilerImpl.compile(ModelVariableCompilerImpl.java:56)
at fuego.metadata.execution.compiler.ModelCompilerImpl.compile(ModelCompilerImpl.java:72)
at fuego.metadata.Process.compile(Process.java:1172)
at fuego.metadata.Process.compileProcess(Process.java:1109)
at fuego.metadata.Process.loadProcess(Process.java:949)
at fuego.metadata.Process.initProcess(Process.java:755)
at fuego.metadata.Process.forName(Process.java:191)
at fuego.server.BaseActiveProcess.getProcess(BaseActiveProcess.java:110)
at fuego.server.ActiveProcessImpl.loadMetadata(ActiveProcessImpl.java:1466)
at fuego.server.ActiveProcessImpl.loadMetadata(ActiveProcessImpl.java:1451)
at fuego.server.ActiveProcessImpl.<init>(ActiveProcessImpl.java:179)
at fuego.server.BaseActiveProcess.<init>(BaseActiveProcess.java:55)
at fuego.ejbengine.EJBActiveProcess.<init>(EJBActiveProcess.java:48)
at fuego.ejbengine.EJBActiveProcess.createAndAddToMaps(EJBActiveProcess.java:66)
at fuego.ejbengine.EJBActiveProcessManager.createActiveProcess(EJBActiveProcessManager.java:58)
at fuego.server.ActiveProcessManager.handleProcess(ActiveProcessManager.java:434)
at fuego.server.service.ActiveProcessService.startProcess(ActiveProcessService.java:136)
at fuego.ejbengine.service.EJBActiveProcessService.startProcessImpl(EJBActiveProcessService.java:88)
at fuego.ejbengine.service.EJBActiveProcessService.access$000(EJBActiveProcessService.java:31)
at fuego.ejbengine.service.EJBActiveProcessService$1.execute(EJBActiveProcessService.java:76)
at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:80)
at fuego.server.execution.DefaultEngineExecution.executeWithoutComponentImmediate(DefaultEngineExecution.java:185)
at fuego.server.execution.EngineExecution.executeWithoutComponentImmediate(EngineExecution.java:86)
at fuego.ejbengine.service.EJBActiveProcessService.startProcess(EJBActiveProcessService.java:73)
at fuego.server.service.ActiveProcessService.runProcessesLoader(ActiveProcessService.java:118)
at fuego.server.service.ActiveProcessService.activateProcesses(ActiveProcessService.java:88)
at fuego.ejbengine.service.EJBActiveProcessService.doActivateProcesses(EJBActiveProcessService.java:62)
at fuego.ejbengine.service.EJBActiveProcessService.initialize(EJBActiveProcessService.java:50)
at fuego.ejbengine.DistributableObjectFactory.initializeActiveProcessService(DistributableObjectFactory.java:60)
at fuego.ejbengine.Engine.startServices(Engine.java:434)
at fuego.ejbengine.Engine.start(Engine.java:133)
at fuego.ejbengine.servlet.SchedulerServlet.init(SchedulerServlet.java:95)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:63)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:507)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1853)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1830)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1750)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Thanks in advance,
SimonHi Simon,
If I were you, I would try installing the latest hotfix. There were some important fixes (such as #8715504) related to variable mappings.
May be it is a good idea to undeploy that project and deploy it again once the HF is installed.
Hope this helps,
Ariel
PS: Remember to regenerate and reinstall all the EARs once the HF is installed.
Edited by: Ariel A. on Sep 9, 2010 2:29 PM -
Greetings -
I have a custom field on a PDP that is used to manually flag a project for review. Once the field is set to "Flag" a red flag should show on the Project Summary page prompting the Portfolio Manager to follow up. The red flag only appears
after publishing the project via Project Pro 2013 not by just editing the PDP via Explorer (Save and Check in).
This occurs on both projects that were created prior to the graphical indicator being added to the PDP and new projects.
Now if instead of using the red flag graphical indicator I just used the text "FLAGGED" that would work fine.
So is this a bug? Or is something setup incorrectly? Or is this how PWA is supposed to handle graphical indicators on the project summary page?
Any help would be much appreciated.Hi Gunnery,
I made the following test: I create 2 project ECF both inserted in the Project details PDP:
for review: flag type field with graphical indicator in case value = yes
for review_2: text type field (with a yes/no look-up table) with graphical indicator in case value = yes
Whitout going to Project Pro, I'm able to modify the 2 fields for any project (created before or after the ECFs creation) and the graphical indicators are instantaneously shown in the summary project center view (just pressing F5).
Note that the graphical indicator is not shown in the PDP, just the text value. Note also that I've not been to Project Pro neither to PWA/schedule PDP to publish the project plan.
Then
Does that correspond to your need? Can you reproduce this example and validate wheither or not it works.
Guillaume Rouyre - MBA, MCP, MCTS -
Publishing WebHelp_Pro Projects
I am looking for some help viz publishing WebHelp_Pro
projects to RoboEngine.NET.
As far as I can make out, it is only possible to publish
multiple WebHelp_Pro projects as merged projects that share the
same table of contents. However, I would really like to publish my
projects so that they each retain their separate table of contents.
This would allow me to give customers a separate web address for
the Help for each product. Is it possible to do this?
Thanks,
AlanHi Alan and welcome to our community
I'm not sure about the .NET version of RoboEngine, but I
think that the regular RoboEngine has a Configuration
manager icon that you can use to configure settings for RoboEngine.
IIRC, one of these settings controls the ability to merge the
projects.
Hope this helps a little... Rick
Maybe you are looking for
-
Time Machine: Make it back up less?
Ok, I don't know how to do this and the discussion board here isn't giving much insight, but I require to find an answer, because right now using an older machine I get pegged at maximum processor peak whenever Time Machine runs in backup, even if it
-
Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.
-
ORA-29857: domain indexes and/or secondary objects exist in the tablespace
I tried to drop tablespace APPS_TS_TX_DATA using drop tablespace APPS_TS_TX_DATA including contents and datafiles cascade constraints. I got error ORA-29857: domain indexes and/or secondary objects exist in the tablespace. After I have dropped all do
-
Waiting message and grey icon won't go away
How to fix this problem, the icon unresponsive
-
Using Map Builder to view Spatial data
Is anyone using XE for Spatial/Locator work? I have created a schema in XE from a spatial dmp file. I know the dmp file creates a valid schema as we use it all the time for testing. After import, I can't view any spatial layers using Oracle's Map Bui