Publish an app to access remotely thru browser

Hi I was wondering if you can publish an application, say like firefox browser on the system and then access this remotely. Kind of like Citrix published app or Windows RemoteApp.
Thanks for your responses

Thanks for your reply Ralph I really appreciate it. Interesting product but not what I'm looking for. I'd like to have an application published on the system, such that it can be accessed through a web browser remotely, so
Client Browser ---> Application hosted on Firefox OS (App) ---- App initialized on hosted Firefox OS --------> response back to Client browser
So client only needs a browser and all the application functions/services are executed by the server.
Best regards

Similar Messages

Can't access CMS thru browser....

Hello, I've tried countless times to access my switches thru CMS web access but to no avail. I have tried with Java 1.3, 1.3.1, and 1.4 and still no luck. I keep getting a lot of class not found errors and error while parsing files. Does anyone know how to fix this? Any help would be appreciated. Thank you.
PS: I can telnet to the switches fine.

Browsers
Netscape Communicator 4.75 and 6.2
Internet Explorer 5.5 and 6.0
Java Plugins
Versions 1.3.0, 1.3.1, 1.4.0
You will need to have a compatible Java (JRE) Plug-in installed in your browser
http://www.cisco.com/en/US/products/hw/switches/ps628/products_data_sheet09186a00800913ce.html#wp39559

Unable to access WRT310N thru browser

I am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address. Can anyone help? Thanks.

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

App for accessing remote files on a mac that you can play in another app

Hey all,
Anyone know of an app that will allow me to access files stored on a mac connected to the same wifi that I can play the file through another app in the iPhone without the file being transferred to the phone?
For example, I want to be able to access a m4v stored on my mac over wifi, within the iPhone, to be played with a video player that I can send to a TV with the composite cable.
I found NetPortal, which works quite well, but you need to transfer the file to your iphone and even then, it wont open with many apps. I tried transferring a m4v file to my phone and it only gave me goodreader as an app to open the file with. I could simply transfer the file I want to access using my USB cable to my iPhone much faster.
Simply, I want to be able to stream movies from my Mac, through my iPhone to a TV and I am finding it hard to find Apps that allow such a thing.
Any suggestions?

I already have that setup at home. I want to be able to use this when I am on the road.
I already use StreamToMe and Airvideo, but sometimes the quality is quite bad, which is mainly cause by my low upload speed. So I am looking for higher quality alternatives. I carry around a macbook air a lot so I figured I could store lots of movies for on the road to be played on other's tvs when were taking it easy.
I am always so amused by responses on this forum. The solution is always to buy something.

Setting up Remote Desktop Apps for access from a Mac with 2FA

Hi
Setting up Remote Desktop Apps for access from a Mac with 2FA.
I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
of the above setup as it is a requirement.
When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
"httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
Thanks in advance for any advice.

Hi,
Thank you for posting in Windows Server Forum.
From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
500 Internal Server Error seems to be a HTTP related error.
The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
Also, please double check the settings if you have a RD gateway implemented in you intranet.
http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
Please check below article for more information.
Windows Server 2012 R2 is coming what does this add to RDS – VDI
In addition, please provide the log file from the client for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
All else fails? Restore it.

Iphone apps using flex remote objects with CF???

I am used to making web applications that use flex remote objects to interact with CF.
Is it possible to use remoting from an iphone app cross compiled using flash builder to interact with Cf remoting on a remote server?

Interseting, config files always seem to me like a strange way to do things.
I'm not exactly sure what you mean by this, but by default, that's how remoting works in Flex - you have channels and destinations defined on your server, and your compiler points to your config files and reads those values. So it's a little extra work to define them in AS instead.
Can you give me any tips on authenticating requests to cfc's from mobiles and how to protect my servers once I exposes cfc's to apps not hosted on the same server as CF?
There isn't really anything mobile-specific you need to do here. Exposing CFCs isn't any different than exposing CFM files that are accessed via a browser. You can use the standard CF session management and CF authentication (cflogin) - there are some examples available by Googling "coldfusion cflogin flex remoting".
Dave Watts, CTO, Fig Leaf Software

Portal failed to access remote resource due to network failures

Hi,
We have a portlet that allows users to upload files to a SQL Server database and make it available for other users to access. The portlet code is on our remote servers. Everything works fine in dev environment, but certain files fail in pre-prod and prod within the portal, but work fine when the code is executed outside the portal.
I keep getting this error:
Error - Portal failed to access remote resource due to network failures. Try again later or contact your portal administrator.
What could the problem be?
Thank you for your help.
Rad

If the Studio service looks good on the remote server where Studio is installed (check that
the service is started and look in the Studio logs for any warnings or errors), you should
also verify the configuration settings in the Studio remote server object. Is it properly
configured and pointing to the correct remote server?
If so, check the portal servers access to the Studio server via the port specified in the remote
server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
the name of your Studio remote server. The screen should just go blank, meaning that there is
something accepting connections on that port on the given server. (We would hope it's the Studio
app and not another service occupying that port.) If you get "Could not open connection to the host"
or some such similar result, check that the network between the portal and the Studio remote server
is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
communication between the two servers).

Force Day View of Calendar Published from Outlook Web Access

Is there a way to force the view of the Outlook calendar published through Outlook Web Access 2013 so that it displays the day or week view without the user having to click on an icon to change the view? I want to display a day view calendar (or week
view) by default. I can successfully publish the calendar but a user has to click the icons to change the view. I want to display the calendar in an iframe on a digital sign and the user won't have a way to click or touch the icon. Are there
parameters that can be passed in the url?

Hello Brian,
I'd suggest asking OWA specific questions on the
Exchange Server for Developers forum instead. Also you may find the
Exchange Server 2010 Outlook Web App Customization SDK helpful.
As for Microsoft Office Outlook you can use the
CurrentView property of the Explorer or Folder classes which returns a View object
representing the current view. To obtain a View object for the view of the current Explorer,
use Explorer.CurrentView instead
of the CurrentView property of the currentFolder object
returned by Explorer.CurrentFolder.
The View object allows you to create customizable views that allow you to better sort, group and ultimately view data of all different types. There are a variety of different view types that provide
the flexibility needed to create and maintain your important data.
The table view type (olTableView) allows you to view data in a simple field-based table.
The Calendar view type (olCalendarView) allows you to view data in a calendar format.
The card view type (olCardView) allows you to view data in a series of cards. Each card displays the information contained by the item and can be sorted.
The icon view type (olIconView) allows you to view data as icons, similar to a Windows folder or explorer.
The timeline view type (olTimelineView) allows you to view data as it is received in a customizable linear time line.
Views are defined and customized using the View object's XML property.
The XML property allows you to create and set a customized XML schema that defines the various features of a view.

Error during JNDI lookup Accessing Remote EJB (access to web service restricted using declarative security model)

Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my web
service with a declarative security model by implementing steps provided in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. When prompted
to accept the digital certificate, click Yes, when prompted for network
authentication information, enter username and password, navigate to the
Test Form tab of Test View, invoke the method by clicking the button and I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I tested my
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order to get
that working. Has anyone seen similar behavior? Is there a known resolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Andre,
It would be best if this issue is handled as an Eval Support case. Please
BEA Customer Support at http://support.beasys.com along with the required
files, and request that an Eval support case be created for this issue.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I removed "t3", still get an error but a different one (Unable to create
InitialContext:null):
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetVisaHistoryTransactions.getVisaHistoryTxn(GetVisaHistoryTransactions
.jws:67) </jwErrorDetail>
</detail>
</error>
Note: inter-domain communication is configured properly. The Web Service to
remote EJB works fine without a declarative security.
Any other ideas?
Thank you for your help.
Andre
"Anurag" <[email protected]> wrote in message
news:[email protected]...
Andre,
It seems you are using the URL
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB
whereas you should not be specifying the "t3:" protocol.
The URL should be like
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB
Please do let me know if you see any issues with this.
Note that this will only allow you to access remote EJBs in the same WLS
domain. For accessing EJBs on another domain, you need to configure
inter-domain communication by
following a few simple steps as mentioned at
http://e-docs.bea.com/wls/docs81/ConsoleHelp/jta.html#1106135. This link has
been provided in the EJB Control Workshop documentation.
Regards,
Anurag
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Raj,
I tried that before, it didn't help. I got similar error message:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB]</faultstr
ing>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
Anything else should I try?
P.S. AccountDelegatorEJB, the remote EJB my Web Service calls is NOTaccess
restricted.
I hope there is a solution.
Thanks,
Andre
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Andre,
Can you try using the following url with username and password
jndi://username:password@host:7001/my.resource.jndi.object ?
once you add webapp level security, the authenticated is the user who
invokes the EJB.
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/ejb/con
CreatingANewEJBControl.html?skipReload=true
has more info on using remote EJB's.
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Alla Resnik" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my
web
service with a declarative security model by implementing steps
provided
in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. Whenprompted
to accept the digital certificate, click Yes, when prompted for
network
authentication information, enter username and password, navigate tothe
Test Form tab of Test View, invoke the method by clicking the buttonand
I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during
JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookupfailed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260)at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64)</jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I testedmy
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order
to
get
that working. Has anyone seen similar behavior? Is there a knownresolution?
Or a suggested way to work around the problem?
Thank you.
Andre

I want my WS app. executes only from a browser link

I am planning to write a game in java and instead of using an applet, I am considering to use Web Start technology. However, there's one thing that I have been trying to find out in the last couple of hours is that, is it possible to restrict my app's excecusion from a browser link only? I dont want my application to be lunched through a desktop shortcut or any cache. The reason for this is that, I want to keep my game free, but show my users ads on my web site before they lunch the game. I also want to save bandwidh by keeping the game files on users machines. Especially the bandwidh issue, and the auto updates feature makes me consider WS over applets. I would appreciate any help, thank you...

It doesnt sound like even if you wanted to have a offline -dsiallowed this is exaclty what you want, you actually want to push some ad conent to the client as well from your server.
Although this isnt allowed as a configuration option in JNLP, one way to do this would be to have a simple server process that each client must register with and therefore allows you to send information from the server to the client each time the client starts up.
The client to server communication could be via any number of mechanisms, simple java.net.sockets, RMI, XML-RPC, CORBA, etc. If you have access to an app server on your server side I would prob use XML-RPC , otherwise if you have access to no app server just a JVM on your server side , you could use either RMI or java.net ServerSocket on your server side. (Sockets is easier but then you have to write alot of parsing logic if your messages are large in size).
I have deployed a web start application which must register with an an upstream app server which is not written in java, it does this via xml messages over sockets (using jaxb to parse the message content). The app will start but then sut down without first registering with the app server.
Let me know if this answered your question or if I was offbase and you were looking for something else?
R
S

Applet in JDK 1.1 accessing remote database

Hi,
I'm trying to make an Applet access a remote Oracle Database using Jdbc thin driver. The database and the Web Server are in deferent machines. The browser i'm using is Internet Explorer. But I always get the followin exception:
Cannot access "remote-machine" at com/ms/security/premissions/NetIOPermissionCheck.
How can I solve that?
Thank you,
Nei

Another interesting thing is, the applet ( jar) that is signed will display the security dialog if I connect from a client that has java plugin 1.4 ( jsdk 1.4) or if I copy it and run it on a j2sdk1.4 machine. I checked the java.policy files on both 1.3.1 machine and 1.4.1 and they are the same.
TIA
Krishna

Accessing remote table from another R/3 system

Hi,
We are running our production on ECC 5.0 but we ABAP web dynpro environment on ECC7.0 portal box. We want use ABAP web dynpro for publishing some application through portal. I have read many document regarding accessing remote systems through RFC enabled function module but for the we need have function module in both system. Is it any way possible to access table from remote R/3 system programmatic without any call for function module. Please advice.
Thanks in advance,
Ravi Prakash

hi,
you should use a remote enabled function no matter what to read db table on other system
grtz,
Koen

Associating Files to Published applications (Word, Excel, Access)

I set up my Server 2012 -R2 with shared activation Office 365 Pro Plus. I published Word, Excel, & Access. It all works fine however the files on the local machine do not associate to anything. What am I missing to get the files to associate to the
published Office products?

Hi,
How did you publish the apps? When you, as an administrator are publishing RemoteApp programs, you should be able to choose to publish file types that should be associated with that program. Then, when the RemoteApp program is installed as
part of a default connection, we associate the RemoteApp program with those file types on the client machine.
More reference:
http://blogs.msdn.com/b/rds/archive/2013/05/21/windows-server-2012-remoteapp-and-desktop-connections-default-connections-and-file-type-associations.aspx
(This is definitely a question which should be addressed on Windows server side.)
Bhanu Tej

JClient accessing remote AppModule via EJB Session Fascade (BMT)?

Would appreciate some "how-to" advice on bootstrapping a remote JClient like the one in the VSM example,
such that: the JClient remotely accesses OC4J-pooled AppModule instances,
rather than creating a new AppModule instance on the client side.
In the OTN VSM-JClient example code, the Bootstrap is done in
AdministrativeServiceForm::main() as follows:
JUApplication app =
JUMetaObjectManager.createApplicationObject(
"VSMJClient.AdministrativeService",
null,
new JUEnvInfoProvider() );
String appModule =
System.getProperty("jclient.service",
"VSMJClient.AdministrativeService" );
The problem with this is -
JUMetaObjectManager.createApplicationObject() is undocumented, hence may or may not facilitate remote
App-Module access?
If anyone can share a working example of JClient remote AppModule access over ORMI (talking to modules deployed on JBuilder-embedded-OC4J), or can modify the VSM-JClient to do the same - it would be greatly appreciated!
Many thanks,
Lee.

JUMetaObjectManager.createApplicationObject("VSMJClient.AdministrativeService",null,new JUEnvInfoProvider());
looks for the Session AdministrativeService in VSMJClient.cpx:
<Session
Name="AdministrativeService"
Package="oracle.otnsamples.vsm.services"
Configuration="AdministrativeServiceLocal" >
</Session>
<Session
Name="RemoteAdministrativeService"
Package="oracle.otnsamples.vsm.services"
Configuration="AdministrativeService9iAS" >
</Session>
Just call
JUMetaObjectManager.createApplicationObject("VSMJClient.RemoteAdministrativeService",null,new JUEnvInfoProvider() );
to access the deployed Beans with configuration AdministrativeService9iAS.

Publish an app to access remotely thru browser

Similar Messages

Maybe you are looking for