Publish Bex workbooks in LDAP

Hi,
Can any one give me a step by step on how to publish Bex workbooks or queries on LDAP.
Thanks...

Hello,
LDAP:
http://help.sap.com/saphelp_erp2004/helpdata/en/4e/4d0d40c04af72ee10000000a1550b0/frameset.htm
You should review these notes and links:
736471 - UME Configuration of multiple LDAP datasources
777640 - Using an LDAP Directory as UME Data Source
718383 - NetWeaver: Supported UME Data Sources and ChangeOptions
Thanks,
Michael

Similar Messages

Publish Bex Workbook to Shared Drive in Windows

Hello Gurus,
I want to schedule Workbook to Shared Drive in Windows. Please let me know If this is possible.
Thanks
Hemanth

Hi rak299,
According your description ,it seems that the machine will get into sleep mode though the
sleep or hibernate is set to disable.
Considering this happened after a upgrade ,I recommend you to upgrade your motherboard driver and chipset driver in the same time. The missing update
will influence the function of the sleep mode.
Just for confirmation, we can run “powercfg -a ” in an administrator command line to check the available sleep settings. Meanwhile ,we can run “powercfg –energy ” to get an analysis of the whole power setting reports.
Best regards

How to publish BW Bex Workbooks into SAP Portal

Hi All
I have used Bex workbooks from the portal in the past at other sites when the user clicks on the Bex workbook the portal start the Excel BEx addin and opens the Bex workbook in it.
Can you kindly share how I can publish Bex workbook to Portal.
Thanks
Karen

Hi Karen,
Please check Bex Iview Applcation parameter.
try with Applcation parameter value : sap-ffield_b64=Y21kPWxkb2MmdGVtcGxhdGVfaWQ9V0VCX1JPTEVfTUVOVQ%3D%3D
Hope it helps
Regards
Arun

Is it possible to publish Bex Excel workbook into portal?

Hello,
Is it possible to publish Bex Excel workbook into portal?
Thanks

Hi,
Publishing BW workbook in portal can be done in two ways.
1)Using RRMXP transaction
/people/arunkumar.sampathkumar/blog/2006/08/09/publishing-bw-workbooks-into-portal
2)Using information broadcasting in portal and publishing into the KM folder
For information broadcasting - you have to install the precalculation server in the portal server.This is needed for precalculation of the workbook.After installing the precalculation server start the corresponding service.If you execute transaction "RSPRECADMIN" in BW, it shows the status of precalculation server, Whether it is running or not
After doing this. Assign the BEX role inthe portal to the user.Now from this screen you can broadcast the BW workbook
Also you can create an iview for the same.
http://help.sap.com/saphelp_nw04s/helpdata/en/4d/f3fa40badbf36fe10000000a1550b0/frameset.htm
Hope this helps.
thanks,
rahul

BEx workbook Default variant not working with Broadcaster

Hi,
We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happens randomly. I have checked broadcast logs also nothing unusual found. Can someone throw some light.
Thanks

Hi,
We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happens randomly. I have checked broadcast logs also nothing unusual found. Can someone throw some light.
Thanks

BEx workbook does not open from portal when excel is already opened

Hi all,
When I go to the portal and open a BEx workbook from there while excel is already open, then the workbook does not open.
When I close excel and then open the BEx workbook it all works fine.
I do not get any error: just nothing happens.
Any idea how to solve this?
Versions:
BI 3.5
Excel 2003
ADDITIONAL INFO
I found this only happens when excel is open with a cell in edit mode. Whenc I then open BEx from the portal I get the error 'please install suitable version'.
Let my know if you have any advice.
Message was edited by:
Arjen de Ruiter
null

No solution for this.

Publishing Excel WorkBook in SharePoint 2013

I have deployed Excel Services, SSRS and BI in SharePoint 2013. The Site BI has been identified as a Trusted location for Excel Services. When I publish a Excel workbook to a document library of the BI site, I get an error "Upload
failed Your Changes were saved but could not be uploaded because of an error. You may be able to upload this file using the server Web Page".. Before uploading the file, I have selected the whole sheet and in Formula Tab, selected define name, and
provided a name for the Sheet. I also have Office Web App servers deployed for the Farm.
Appreciate assistance to fix the problem. This is my first try to publish Excel Workbook using Excel services.
Thanks
MP

Hi MP,
For your issue, please provide detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Also you can have a look at the similar thread:
https://social.technet.microsoft.com/Forums/office/en-US/18069755-f6af-46bb-8c55-a4230860f57d/your-changes-were-saved-but-could-not-be-uploaded-because-of-an-error?forum=sharepointgenerallegacy
https://social.technet.microsoft.com/Forums/office/en-US/684c5f1a-97ff-4e87-9ffa-439c5d40b800/saving-from-office2010-gives-upload-error?forum=sharepointgeneralprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Problem in BEx Workbook Printing

Hi,
I need to print a BEx workbook. The column headers in the report is months, i.e April, May, June... till March. When I print the workbook the column header is getting truncated.
Please advise me what needs to be done to print the entire column text. Please suggest me if there are any settings.
Best Regards,
Krishna

Hi,
Enable the AutoFit property of the design items.
This Autofit option will be available in the Properties of Design Items dialog.
If the Autofit is enabled then the text displayed will be fit within the cell.Hence there wont be any truncation issues.
Before printing adjust the Print Area and check Print Preview
Rgds,
Murali

How to create hyperlink in BEx workbook?

All, I have 2 queries in a BEx workbook on 2 different worksheets. Both queries have 0materials in the row. The user wants to be able to click on material XYZ in worksheet 1 and then be directed to the corresponding line (i.e. for that material XYZ) in worksheet 2. Is this possible to do via a hyperlink?
Cheers!

Cheers but a simple hyperlink will not do. I need to link to the same material number in a different worksheet. So in worksheet 1 I have for example the following lines
Mat nr
123
333
444
555
in worksheet 2 I have lines
Mat nr
904
768
123
333
444
555
If I click on 333 in first sheet I want to jump to the line with material 333 in worksheet 2.

Display input variables in BEx workbook header

Hi forum,
I created a global BEx workbook template and would like to display the input variables (user entries) in the header section. On refresh of the workbook, this section should be updated with the new input variables. I am on BEx 7.0 and already experimented with text elements in the Design Mode of BEx Analyzer. However, you can only select general filter values, not specifically variables.
On release BI 3.x the Visual Basic function SAPBEXshowTextElements(selectgroup, ...) was available. You could set selectgroup to "V" (show variables only) and retrieve the variable values.
However on 7.0 this function does not seem to work any longer.
Do you know how this can be achieved in BEx Analyzer 7.0?
Thanks,
Alex

Hi,
1) Keep variable in default values in Filters.if u keep variable in default values user enterd value will be displayed in workbook filters.
2) Open workbook and go to design mode.
3) Delete the header text item and also delete the header picture bar.
4) Write report name in "A1".
5) At the end of report name (say H1or I1) use this excel formula =Replace(old text,start_num, num_chrs, new_tex).
With this whenever user changes the variable value will be changed in report header.
Hope it is useful.
Thanks,
Ashok

Link to BEx Workbook in STS

Hi,
We have Bex workbooks created as planning applications in IP.
Could anyone suggest how these workbooks can be called from STS? For web applications we can provide the link to planning application directly in the STS customizing but not sure how we can achieve the same for BEx workbooks.
Regards,
Deepti

Hi Guys,
You can broadcast the workbook with <PR_ONLINE_LINK> in the broadcast message get the URL. When you launch the URL later, it will trigger your Bex Analyzer to launch the workbook.
Hope this helps.
Regards,
Wira

After implementing Note 992032 getting errors in Bex workbook

Hi All,
After Implementing the note 992032 (You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about using transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes) getting error messages in BEx workbook when try to filter on any InfoObject but when I run query I'm getting data but not able to filter, we are using BI 7 on patch 11. When implementing the note number 964580 it's giving error and this particular note number is not yet implemented.
Getting error messages like:
1. Error reading the data of InfoProvider 0FIAR_O03
2. An error occurred in the program:
3. ORA-20000: Insufficient privileges ORA-06512: at "SYS.DBMS_STATS", line 2150 ORA-06512: at "SYS.DBMS_STATS", line 14112 ORA-06512: at line 1
4. System error in program CL_RSR_WWW_RENDERER and form GET_FILTER_VALUES_CHA:03 (see long text)
Before implementing 992032 everything worked well.
Could anyone please help!
King Regards
Suman

We are getting similar errors after applying BW SP11 yesterday on our dev BW system. I've opened a message with SAP support . If anyone gets a solution for this please post it.
Regards,
Ron.

Calling Bex Workbooks from the Web Dynpro

Hi All,
I'm calling Bex Workbooks from my dynpro using the following code:
create reentrance ticket
call function 'CREATE_RFC_REENTRANCE_TICKET'
    importing
      ticket                 = l_ticket
    exceptions
      ticket_logon_disabled = 1
      ticket_creation_failed = 2
      kernel_too_old         = 3
      others                 = 4.
check sy-subrc = 0.
system number
call function 'GET_SYSTEM_NUMBER'
    importing
      instancenumber = l_sysno.
create the shortcut
CONCATENATE '[System]'                           cl_abap_char_utilities=>cr_lf
    'GuiParm=' sy-host ` ` l_sysno                 cl_abap_char_utilities=>cr_lf
    'Client=' sy-mandt                             cl_abap_char_utilities=>cr_lf
    '[User]'                                       cl_abap_char_utilities=>cr_lf
    'Name=' sy-uname                               cl_abap_char_utilities=>cr_lf
    'at="MYSAPSSO2=' l_ticket '"'                  cl_abap_char_utilities=>cr_lf
    'Language=' sy-langu                           cl_abap_char_utilities=>cr_lf
    '[Function]'                                   cl_abap_char_utilities=>cr_lf
    'Title='                                       cl_abap_char_utilities=>cr_lf
    'Command=*RRMXP WBID=' l_workbookid            cl_abap_char_utilities=>cr_lf
    'Type=Transaction'                             cl_abap_char_utilities=>cr_lf
    '[Configuration]'                              cl_abap_char_utilities=>cr_lf
    'GuiSize=Normal window'                        cl_abap_char_utilities=>cr_lf
    'Workplace=true'                               cl_abap_char_utilities=>cr_lf
    '[Options]'                                    cl_abap_char_utilities=>cr_lf
    'Reuse=0'                                      cl_abap_char_utilities=>cr_lf
    into l_content.
lo_conv = cl_abap_conv_out_ce=>create( ).
lo_conv->write( data = l_content ).
l_content_x = lo_conv->get_buffer( ).
concatenate l_workbookid `.sap` into l_filename.
cl_wd_runtime_services=>attach_file_to_response(
    i_filename      = l_filename
    i_content       = l_content_x
    i_mime_type     = `application/octet-stream`
    i_in_new_window = abap_false
    i_inplace       = abap_true ).
Most of the time it's working fine - but some user experience a "Host Unknown" failure ?? - I suspect than it has something to do with contacting Excel, but I can't figure out exactly what goes wrong. The users have all needed componets of course, and they can run Workbooks from SAP GUI without getting this error.
Thanx Ahead.

Look at below link: it might help you.
[WAD URL Call for BEX|/thread/268199 [original link is broken];
Raja

Issue opening BEx workbooks after 720 upgrade

Hi Gurus,
We use a custom web template to leverage BW [BW-ABAP] security over the Portals [BW-JAVA]. In other words we do not need to create iViews in Portal for each BW Query or BW Workbook.
Earlier we were using 710 GUI with BI 70 Add-on. Now we are upgrading to 720 GUI [patch 5] with BI 70 Add-on [patch 400].
Now when I launch BEx workbook via the Portal, it launches Excel with the BI 70 Add-on [under Excel Add-Ins tab] and then it launches the SAP GUI screen with a success message "No authorization to change role abc. Message no. S#423". The BEx Toolbox connection icon [right besides the yellow question-mark] shows disconnected.
This happens even when I try to launch the BEx Analyzer directly from Portal.
Any help or guidance is heartily appreciated and I promise to award points.
Thanks and regards,
Pratik

Hello,
Please apply these 2 Notes and check again.
1476882
1180683
Regards,
Michael

Comments in Bex-Workbook IP BW 7.0 ?

Hello Planning experts
It is possible to insert a 'Comment field' in a - let say- Web planning application using the single document web item. However I am not aware of any possibilities to do so in the Bex-Workbook. Therefore following 2x questions:
- Is it possible to insert in BEx-Workbook a Comment field, where the planner could e.g comment the increased budget on a certain cost center?
- Is it possible to report over the entered comments ( let say in a query?)
Thanks and welcome every answer, which helps me to know this comment feature possibilities in IP BW 7.0
Christian

Hi,
As far as I know, this functionality is not available in excel frontend (not cent-percent sure about latest SPs becuase I heard that this was planned for some future SP).
Documents created in queries are saved against a combination value of characteristics - to be able to report on them, you should have the same drilldown of characteristics in the query alongwith which you want to fetch the documents. Also, make sure that the save level of the documents in infoprovider level and not query level (can be set in Web Template properties).

Publish Bex workbooks in LDAP

Similar Messages

Maybe you are looking for