"Publish" button greyed out
While my webpage was open and the autoplay music was running (on the internet), I returned to iWeb to make some changes. I clicked on "Publish" and when I "visited" my new site, the same song was playing over itself, but at a different place in the song (as if two different songs were playing, one on top of the other). I closed out of both Firefox and iWeb, and restarted my Mac and then iWeb. But the "Publish" button is greyed out, preventing me from publishing any further changes to my webpage in iWeb. Is there anything that I can do, or is this webpage file somehow corrupted?
dear British Bulldog, Your suggestion to make a small change did, as you predicted, make the "Publish" button live again. Thank you for that suggestion. But clicking that button or choosing the "publish All to .mac" option - either way did not accomplish the latest edits to my site, but instead left the site without these changes, as it was before. Any other ideas?
Similar Messages
-
Publish Button Greyed out for Standalone Option
I'm using Captivate 3.0 for my project. I'm attempting to
publish my project using the Standalone feature. Unfortunately, the
Publish button is Greyed out. It doesn't matter what the file name
is, where I'm saving it, what's checked or unchecked...the button
is just greyed out the whole time.
How can I enable the Publish button through the Standalone
feature?
Thanks in advance!Hi all
Have any of you tried upgrading the Flash Player version on
your PC? I notice from the screen capture, that Flash Player 6 is
selected, but disabled. Normally Captivate 3 only offers versions
7, 8 and 9 as an option. At first, I saw version 6 listed here and
thought that perhaps Captivate 2 was being used, as it was the last
version that offered the ability to publish in Flash Player 6
format. But I then noticed that the File Type of Windows Executable
wasn't selectable as well as the dialog showing Adobe Connect.
These are indicators you are using Captivate 3.
So the only thing that seems to make sense is that perhaps
you have Flash Player 6 on your PC and need to upgrade it.
This
link should take you to the Flash Player Download Center, where
your version in use should be reported and you will have the
ability to install a newer version.
Let us know how it goes! Rick -
Submit Button Greyed Out (v 4.0.5)
I have been using Compressor successfully for about a year. Recently it updated to v4.0.5. Now I am not able to submit, with the final Submit button greyed out. I have checked my Destination folder permissions and all appear correct.
What could be the cause of this, and what shall I do? I need to render a program urgently for broadcast.
Thanks
GeoffI just resolved a similar problem. I am running OSX 10.6.8 on a MBP 13" 2010.
Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder. This did not fix the problem on its own.
They then had me delete the Apple Qmaster folder from user>library>application support. This did not fix the problem on it's own.
I then reinstalled the Compressor application itself. This did not fix the problem on its own.
I then verified permissions and repaired permissions using disk utility. This did not fix the problem on it's own.
I then clicked on "Share Monitor" which is found on the Compressor task bar. "This Computer" was displayed in the left column. I simply clicked on it in order to high light it. I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
YMMV. -
After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Agent email help - buttons greyed out at one location
The setup: Two call centers. One in NC and one in CA.
The one in NC, which is where the call center servers are, has no issues with email buttons becoming active.
The one in CA, every morning when the agents login the email buttons will not become active unless the users do the following workaround
Start agent.
Run and IE url that was given to me by Cisco. http://<ipaddress of ccx server/EemUi/index.jsp?port=59015
This will force Java to start and have the java icon appear in the system tray.
Email buttons become active
Close IE window (which make email buttons grey out again)
close and restart agent
Email buttons work.
I only have this issue in the CA office.
I had them ship a desktop to me in the NC office. I connected it and did NOT have an issue. Everything works perfectly here.
Is the issue tied to the distance? Is there some java time out setting I can tweek to make this work.
I didn't have this problem with 8.5 su 2.... it happened after the update to su 3
Anyone seen this? Cisco has no answer.I bounced this around the office to get some ideas. One question - how long is the CA office waiting for the email buttons to become active? That is, setting the workaround aside, if they wait long enough, do the Agent E-Mail buttons ever become active? The thinking is that could be a factor as the entire applet is around 40 MB. If connection speed isn't great it could take a while to download which would explain the scenario.
Tom -
Put, Get , Connection buttons greyed out
Hi All,
I am pretty new to Dreamweaver but not to web development. I
have set up and connected a few sites from my own PC. It all goes
just like it says in the manuals.
But I got called into a client site who have an existing site
set up in Dreamweaver. The DW person left and the current person
wanted some coaching. Well the Code, Split, Design views all came
up and we could edit just fine.
But over on the right, above the list of files, all the
buttons (put, get, connection etc.) were greyed out. At first I
assumed the FTP connection was not set up, but it was, because when
we saved files, they saved straight to the live site.
So I went over to look at Site / Manage Sites. The FTP
connection was listed, but many of the other options (all the
categories within Advanced) did not seem to be available. They were
not just grayed out - I could not even see the list of them.
I have been fiddling around at home on my own sites, trying
to figure out how to recreate this and I can't. I can figure out
how to put myself onto live updating (update to remote FTP on Save)
but I don't get the other buttons greyed out just because I am
working like this.
Any ideas? I'd like to be able to go back there, take them
off live updates and restore the buttons.
Thanks
AbigailUnless one is working in ColdFusion, or has special
requirements, the FTP &
RDS server option should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C4F834C6.30E30D%[email protected]..
>A guess- they set this up as an "RDS" ftp site, and it is
editing the live
> files on the server.
>
> To make a regular ftp site connection, make a New site.
> If it's CS3 version, make sure you pick "site" and not
"RDS"
> Enter all the details, and make a "regular" ftp
connection, not an RDS
> connection.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
> -
Itunes showing all data as other and sync button greyed out
Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes. -
My wifi button greyed out...pls help
hi all users,,,my iPhine 4s wifi button greyed out suddenly
tried the temperature trick but problem persists
pls help anyone
thanksTry the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..
well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!! -
Publish site button greyed out
have tested ftp and this is fine and says ready to publish but publish site button is greyed out and wont let me! have spent hours today trying to resolve this, help!
I've done it not sure how, restarted the program and that seemed to free everything up, but it's up there! hooray!!
-
Library buttons greyed out. No loops available.
Hi,
Thought I finally should start learning Garageband. A couple of years ago, I bought a couple of jam packs. As I recall, I had them included in GB then. But in this version, the library buttons are greyed out and there's no loops included.
How do I import them?
I have GB '08 (version 4.1.2) and Mac OS 10.5.7the library buttons are greyed out and there's no loops included.
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops
(Let the page FULLY load. The link to your answer is at the top of your screen)
How do I import them?
drop the folders onto the loop browser -
IPhone Mail app send button greyed out
I have a new iPhone 6 plus with a single IMAP mail account. I can receive mail and reply to mail that's been sent to me but when I start a new mail item the send button is greyed out.
My mail server settings are correct and I've tried reentering the SMTP details, resetting the network settings and restarting the phone. I've tried sending to different addresses and always include a subject and text in the body but the send option never becomes available.Open Mail Preferences/Accounts/Account information. In the box for the Outgoing Server, I suspect None is selected? Make a selection of the correct SMTP, and that should resolve.
Ernie -
Crystal report print button greyed out in user citrix sessions
Hi,
We are running Citrix Enterprise Server 4.5 on Windows 2003 servers.
We have a ERP app called Epicor 7.3.6 installed on them.
Crystal Reports 9 is installed on all these servers and the epicor app displays and prints crystal reports.
Some users when logged into their Citrix profile session and running Crystal Reports from within Epicor application can not print the Crystal report because the Print button is greyed out.
We have compared users that can print against users who can not not print and not found anything at the network, file permissions, application permissions, printer setup setting level.
Also, if we were to take citirx completely out of the discussion, what might cause the print button to be greyed out in a crystal report when it is displayed (not the developer, but in the minmal window that shows the export, print, magnify options only).
Thanks
ChrisCheck with Epicor. We don't know how Epicor implemented the solution so it's kinda like you asking a mechnic to fix your car, but he can't open the hood to see the engine.
A tip; this is more than likely due to permissions. So, compare between boxes thast work and don't work. Use [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to track permission issues.
Ludek -
Why is Submit Button Greyed Out on Compressor
Just recently, I have been unable to submit a video for compression. As always, I drag on the compression I want to use and select the destination. I hit the first submit buttn and the window drops down asking for the name of the batch. I enter the name but on this window the submit button is greyed out and I cannot submit the project for compression.
I looked at past instances of this problem and I downloaded and ran Compresser Repair 2.2, but the problem remains.
Any ideas would be greatly appreciated. I have never had this problem before.
Barry O'Brien
Compressor 3.5.3
FCP 7.0.3
OS 10.6.8Russ,
No worries. Yesterday, I brought the Apple Clean Install instructions to pointed out to me to my IT guy I had him do a clean intall of Compressor using the outline and the problem was solved. It took him an hour. It would have taken me 1/2 a day!
I did have one good bit of advice suggested by Jason Brown over at Creative Cow, but I didn't have time to research it - and my computer was already on my IT guy's bench. He said:
"Let me start by saying I'm not an expert...just a user, so I could be wrong. BUT I fixed my issue after installing fcpx, it moved compressor to a subfolder in applications, but not the Qmaster app. When I ran update, it updated Qmaster to 3.5.3 but compressor was just on 3.5 I took compressor out of that folder, ran update again and they were same version number. U can check version number by looking about under file menu. For Qmaster, select app, get info and its in there."
I think he is suggesting that Emaster and Compressor need simultanious updats, and to do that Apple has to be able to find the files. The fact that Apple has the clean install for Compressor so available and in multiple locations suggsts to me that this is a common problem.
One of the Creative Cow guys said that his production company does complete clean installs off all apps on all machines every 12 to 16 months!
Well, I declare this issue fixed, and thank you for all your help and advice. Hopefully, someone else will find this thread and it will be helpful to them.
Regards,
Barry -
I wanted to VERIFY a volume and received and red-letter error that the volume needed repair.
Here is the exact message:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, the REPAIR DISK button is greyed out. How can I repair this VOLUME if there is no REPAIR option?
Thanks,
Joel DuBay
Bass Traps and Acoustic Panels
http://www.readyacoustics.comJoel,
You are probably going to find that booting to the install disk and running Disk Utility that way isn't going to help any further that "fsck" did. In fact, there is no difference between the command line "fsck" and Disk Utility's "Repair Disk" routine.
What you have is a disk error that Disk Utility cannot fix. In most cases, Disk Utility will tell you that it cannot repair a particular error, if such is the case. In rare cases (lke yours), however, Disk Utility or fsck will report that repairs were made, when in fact they were not. I recommend that you do go ahead and make the attempt, but I am betting that you find the error still exists.
Disk Warrior may have better success in making the repair, if you want to pay for it.
However, you should be aware that files are likely to have been damaged by the disk error, and even a successful repair of the file system cannot replace any data that has been lost. In other words, any critical system files that are currently damaged will remain so, and any problems you are experiencing as a result of the damaged files will still exist.
Unfortunately, the only way to fix these damaged files is to format and reinstall, preferably "zeroing" the drive in the process. Since this necessitates making a good backup first, that should be your biggest concern right now.
If you know how to go about making a comprehensive backup, and are able to do so now, that is what I recommend you do. If you have difficulty making a backup as a result of the disk error, Disk Warrior may be able to help, and it might be worth laying out the cash for it. If, however, you have no problems making a backup, Disk Warrior (and its cost) would be uneccessary, IMO.
Scott
Maybe you are looking for
-
Macbook turns off while installing
Some days ago I bought a used macbook. It had Snow Leopard 10.6.8 installed. I wanted to repartition and make a fresh installation. I made it but when the half of installation was ready it suddenly turned of... i tried it 4 or 5 times and the same ha
-
I have put an Html snippet which reads Contact Us When I publish, I only see the word "Contact" How do I get to see the whole phrase? 10.6.2 with iWeb 3.0.1
-
HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.
I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.
-
I helped a friend out recently and am wondering if I made the wrong decision... Here's the situation: Friend bought an iMac via the Apple store and also bought a time capsule. A mac specialist came to his home. He had almost a tb of video, so time ma
-
Hello, I've got a question about Windows defender: I have a brand new Thinkpad T440S (Windows 8.1 Pro) and Windows Defender cannot open. There is a message saying: "This app has been turned off and isn't monitoring your computer". Impossible to turn