Publish changes in iCal

I have an iPhone 3G s running OS 3 with my iCal synced to MobileMe. Syncing works fine, but changes to my calendar are not getting published until I go to my iMac. So, how do you publish iCal from your iPhone so people subscribed to your calendar can see the changes?

Same problem here. You have to launch iCal from a Mac (after is syncs with the phone) to get the calendar to publish. Once published it goes to the other subscribed phones. I would like to see the ability to subscribe to a calendar within the Mobile Me web page. I hope someone at Apple can solve this one or I might not be renewing my Mobile Me subscription.

Similar Messages

Changes in ical won't update my Exchange 2007 server

If I make a change in ical, it doesn't update my server calendar. It works the other way round. Can anyone help? Is it possible to make this work? My server support line tell me Exchange 2007 doesn't support ical.

bump... and please help. I'm really lost on this. My calanders say they are publishing to mobile me but they are not!

Unable to make changes in iCal

I've lost the ability to make changes in iCal. Any change I make is lost when I quit and restart Ical. For example: Added event disappears, deleted task or calender reappears, unpublished calender is again marked as published. All looks fine while iCal is running and is undone when iCal is restarted.
I can make changes in e.g. Mail, I removed tasks from Mail and they stayed removed.
Events added in my iPhone gets added in iCal.
/SJ

I can't seem to find any help for this issue either. I don't have a .mac account btw. but here is what happened to me.
I've been trying to switch over from entourage so I organized my recurring events in ical, including a few calendars, a few subscription calendars and the "show birthday calendars" option. Everything was fine for a week. Then i opened ical and all my tasks and some of my events (but not all) were missing. At this point ical began to NOT save anything i entered. I would enter a test task or event and upon reopening the application the changes were not there.
I searched the internet for help. I found no advice except deleting everything and starting over. This i did last week. I even deleted my plists, library etc... Now when i relaunched, I had empty Home and Work calendars and a "Entourage calendar", which i tried to delete multiple times (syncing was turned off), but I can't seem to permanently remove. It will go away if i delete it, but if i clean up the plists and library again it comes back. maybe this is the way it's suppose to work?? In any case, i finally just unchecked it. This time things seemed to work fine for a day. So i finally turned back on the "birthdays calendar", but i was still leery of subscribing to any other calendars. Things were fine again.
Last night I entered my tasks again. No importing, just directly entering the info into ical. This morning I open i cal and i'm back to where i started. No tasks, missing events, and i can't seem to get any new events or tasks to save. I'm so frustrated! I hope someone can help. Thanks!

Error while creating publisher change tables in CDC

Hi,
I am implementing Change Data Capture. I got getting following error while creating publisher change tables in Staging database. My database version is 10.2.0.2.0 .
I appreciate your help.
ERROR at line 1:
ORA-29540: class oracle/CDC/PublishApi does not exist
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 611
ORA-06512: at line 2
Thanks,
Venkat.

This problem got fixed when I ran below script!!
@$ORACLE_HOME/rdbms/admin/initcdc.sql;

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

First do the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Why can't Apple make 'publish changes only' for non .mac users?

The recent iWeb update to 1.1 and the now increasingly obvious differential between .mac and non .mac features has prompted me to post here today.
I can understand comments, passwords and search facilities being a .mac only experience because it requires server side technology. I can also understand that .mac users get enhanced features like slideshows as well.
But why is the fundamentally *basic* option to 'publish the changes only' not available to non .mac users?
I know uploading to .mac uses a different protocol to uploading via FTP, but I don't think it is about that. Obviously the software engine in iWeb 1.1 can now track the pages that have changed, and flag those for uploading. So if the facility to do this is not available with non .mac uploading, is this some form of crippleware? Can any software engineers comment on this or am I talking off the top of my head? [And please mods, don't delete this post - I use the word 'crippleware' in its harshest form, clearly I can still use iWeb to make fantastic websites - I am asking a technical question here.]
Michael
A Trusty Quicksilver G4 Dual 1GHz

OK, from reading this thread:
http://discussions.apple.com/thread.jspa?threadID=486335&tstart=0
There is a pattern: An error occurred while publishing file “/blah/blah", while file "/blah/blah" seems to be random from one person to the next, but they all share one thing and that is communication protocol.
For iWeb to be able to publish changes to .Mac, it has to:
1. identify if the file exists
2. do the following:
2a. if not exists, copy it to .Mac
2b. if exist, do some sort comparison - CRC checksum -
2b1. if checksums match, don't copy
2b2. if checksums don't match copy it to .Mac
At least I think that's what going on, I don't have .Mac so that is best I can think of. Perhaps, some Apple SW engineers can jump in here.
Now, the bad part is iWeb has to (and I'm assuming iWeb uses WebDAV):
1. go thru each file locally
2. crawl its way into .Mac (WebDAV is a slow protocol) to find the the counter part.
3. when it finds a file that matches a client side file, it has to (some how) do checksum on-the-fly across the net work (which is slow and congested)
#3 is I think where it failed, there are many factors here: 1) networks congestion 2) latency 3) protocol overhead 4) checksum calculation time etc...
iWeb eventually times out because any/all of the above.
It's nice that WebDAV can author to the host yada, yada, but it's so SLOOOOOW.
What I would do is for every publishing, I would build a files and their checksums keep it on the host (or local, must be hidden).
For subsequence publishing, I would (use a fast protocol like FTP) download this pre-built files/checksums list. Locally, do a full publishing, making checksum comparison, the result is delta changes; upload only those. Build a new files/checksums list upload that too.
What I mean to say is offload everything that is possible to local machine, bandwidth is PREMIUM!

I forgot the iWeb password to publish changes on my site

Been a while since I've made changes to my site. When I was asked for the password to publish changes, none of the passwords I tried were successful. I can't find anywhere to retrieve the correct one or change to a new one.

If you published it to MobileMe, nothing will work; MobileMe is closed and iCloud doesn't offer web hosting.
If you published it somewhere else, use the password for that hosting service. If needed, contact them.
(107455)

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Doing the following wouldn't hurt either:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.

Can't Publish changes using FTP

Ok, here is the whole story! At first I published my site using mobile me but then realized that my URL was way too long and not what I wanted since I am making a business site and wanted www.businessname.com. So, I bought a domain from godaddy and then hosted my site using that account. NOW, when I try to publish changes or even republish the entire site to make changes, nothing happens! It will say that my site is now published but then when I click visit site, a message comes up saying that the mobileme page I am looking for can not be found???? But I am not using mobile me to publish anymore!!! Any idea what I need to do? Thanks!

Okay, so when you purchased your domain name from GoDaddy did you also buy a hosting account from them?
If you didn't do this, then you are not publishing using ftp at all. You are still publishing to MobileMe, but you simply need to direct your domain name to web.me.com using CNAME forwarding.
If you did purchase hosting from GoDaddy too, then perhaps rather than using the built in iWeb ftp, you should publish to a local folder and upload to your server space using Cyberduck or Transmit which you can download for free.

Can't publish changes - buttons disabled

Dear all,
I can not publish changes to my sitethrough iWeb. The buttons are disabled to publish and I have no ideawhat to do... I have to update my website! I have 2 mac computers athome, but just one of them is with all the site that I've donebefore. It's EMMANUELEBALDINI.ME
I have Time Capsule also, but I don'tknow how to copy the whole site in it.. and also, how to update mywebsite.
First it has appeared UNKNOWNPUBLISHING ERROR OCCURS. THE DISK MAY BE DAMAGED, FULL, OR YOU MAYNOT HAVE SUFFICIENT and I tried to cancel some dates to fix thisproblem and now it doesn't appear this message, but the buttons andthe option to publish the website don't appear.
Some help?
Please...
Fernanda

First we need some details: where are you hosting the site? Have you visited the site to see if the changes have been made? Try clearing your browser's cache (Command+Option+E for Safari) and relaod the site.
Have you tried publishing your site to a folder on your hard drive? If not do so.
A first fix attempt can be the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
OT

Can no longer publish changes

I've obviously heard that Apple are no longer running MobileMe but I thought it was running until next year.
Have been trying to publish changes to my website via MMe but keep getting message saying 'can't connect to MobileMe'. Admittedly, this has happened since I upgraded to ilife 11.
Any answers anyone?

Try this:
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
If still not working try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home()/Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
OT

IWeb - Can't Publish Changes

Apple announced support for iWeb publishing until June 30th. I am no longer permitted to publish changes to my site.
Is there any way around this until I transfer the site to a new webhosting service?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If the problem is not repeated with the test library then your current library is damaged.
If that's the case make a temporary, backup copy if you don't already have one (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

See changes in iCal?

Hi, me and my assistant both have our own macbooks. Our calendars, contacts,... are set up to share all our information. So any changes she makes, I can see after a few seconds.
But is there a way to see what data has been changed on iCal? for example, can I see which changes have been made by her today?
tnx!
chris, Belgium, Antwerp

Thanks. Let me see if I understand. I have an Outlook account at work which I never directly use. I access my Outlook email through Mac Mail. I use iCal and I don't use my corporate calendar at all -- although I should and that's the purpose of this post.
Basically, I use a mac exclusively in a Windows oriented workplace.
Here's what's on the Apple Website (link above):
"Setting up MobileMe to sync with your PC is simple. Just install the latest version of iTunes, and a MobileMe Preferences application is added to your Windows Control Panel. Sign in with your MobileMe member name and password and all of your settings are right there."
So, I need to log in to a Windows PC at work and download iTunes. At this point I have my iCal calendar in the MobileMe "Cloud" and I've logged into a networked computer at work. Now I suppose I have to open Outlook on this computer. As I mentioned above, I have an Outlook account, so I suppose when I'm logged in and open Outlook, that the Outlook account that launches is my Outlook account. Now what do I do? Is there a sync button in the MobileMe Preferences application within the Windows Control Panel? Supposing that there is, does a sync operation at this point sync my MobileMe calendar information to my Outlook calendar? Is it just that easy??
Thanks Again,
Jason

IWeb won't publish changes to website without adding "/SiteName"

I'm trying to publish changes to my website with a URL that is an established domain name.
When I click "Publish Site", iWeb adds "/SiteName" to the URL and the changes are
published to "URL/SiteName". But when I search for my site on Google (it pops up
readily as the website has been accessed many many times), the OLD, UNCHANGED
website with the old URL comes up. To get the revised website, users would have
to specifically use the CHANGED URL, "URL/SiteName."
Every time I try to remove "Site Name" from the blank for Site name, iWeb puts
"SiteName" back in. How do I keep the Site name slot blank so that iWeb will
publish my changes to the old familiar URL that can be found on Google?
As a Server engineer commented to me, "There has been a folder called [SiteName] uploaded
recently to the root [URL] of your account. This make me suspect that iWeb is set to publish in the
wrong directory. Make sure it is publishing to the public_html directory."
I put "public_html" into Directory/Path. Still no changes to my website at URL; changes have
been published only to "URL/SiteName".
Any help available?

That is the way that iWeb works and it is normal practice to get the url with the Sitename in it. As you have found, if you try to leave the sitename blank, iWeb will put it back in.
The server engineer that you spoke to is correct that your site folder has been uploaded to your 'public_html" folder on your server.
If you want your url without the sitename included, then you need to upload the contents only from your site folder and NOT the whole folder itself and then your url will be http://www.domain.com without the http://www.domain.com/sitename/page name.html.
You can achieve this by publishing your site to a local folder from iWeb and then you need to download an ftp programme such as Cyberduck or Yummy ftp. You then use either of these 2 to upload only the contents of your site folder to your 'public_html' folder on your server and if you just upload the contents and NOT the whole folder itself, then your url will be http://www.domain.com.
Sometimes putting 'public_html' into the Directory/Path will not work and you'll need to strart from scratch, so you'll need an ftp programme so that you can link up to your server and you can see exactly what is in your public_html folder on your server and delete the site folder and start again, by then uploading just the contents of your site folder rather than the whole folder itself.
Ultimately, what you need to do is upload the contents and the contents only of your site folder and NOT the whole folder itself to get your url back to http://www.domain.com without the sitename.

Publishing changed pages only

How do I get iWeb to only publish changed pages? It is taking an incredibly long time for my uploads because it is re-publishing my entire site each time I make a change. Also, is there a feature in either iWeb or iPhoto that lets me shrink my picture size? Thanks.

Like you, I also have iWeb 1.1.1 and publish to .mac as my host. I just did a test and created a test page within my 'Site 1' (Note, names have been changedc to protect the innocent, as Sgt Web used to say). It was the only page/site with the red color. When I clicked publish, the progress window said "Creating welcome", then "Creating Site 1", then "Creating Page 1" (that's first page in Site 1) then "Creating Page 2", etc through all 24 pages in Site 1. Then "Creating Site 2" followed by each of the 5 pages in Site 2. Then "Creating Blog" followed by each of the 4 entries in my blog.
so I conclude that you must be born under a lucky star, as I'm clearly not experiencing the simpler world that you are. I'm envious!

Publish changes in iCal

Similar Messages

Maybe you are looking for