Publish Course Content

Hi,
When I try to browse the Master Repository from the Publish Course Content iview under Course Administration -> Content Administration -> Publish Course Content I get the message: 'SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 401 : Unauthorized") '. I have given permissions to 'Everyone' on CM folder in KM. I am using the Business Package for Course Administrator (SAP ERP) 1.4.
Any ideas what could be missing/wrong i n my config?
Regards,
Tshepo

Hi Tshepo,
I am facing the same issue the message message: 'SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 401 : Unauthorized")....i am not getting any error when i am providing my id , but when i am using other id in RFC connection than getting this error. Infact created a new user by copying my user id and used this copied ID , still i am getting the error.
Please let me know if u have any idea on this..
Thanks..
Priyank..

Similar Messages

About can't browse Main repository When publish course content

Hi all:
I am new to learning solution. Here is our problem, I have configure a WebDAV repository in KM, and fill the informations into SPRO.
When I open the iview "Publish Course Content", and try to select a source file in reposiory, I can see no directory or files in the true of "View of Master Index" . when I tried to open the tree, their is an excpetion "SoapFaultCode:1".
I have tried to test the "CO_LSO_CPT_REPOSITORY_SERVICE" in ecc, the method runs OK.
Anyone knows where the problem is? Thank you very much!
Wayne

Hi Wayne,
Apply note: "Note 1431059 - Select button is not enabled by default in RCP tool"
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1431059]
Regards
David Cortes
Edited by: David Cortes on May 21, 2010 6:41 PM

LSO - Publish Course Content error

Hi All
We are having a problem publishing course content from the Learning Solution Admin role.
Content type is set to "Single File". I am able to navigate to the source file and also the target folder.
I then click on Publish, and the message to say that it is being published in the background.
However, when I go back to the Published Content view, I see the upload in error with a status = "Failed" and the progress indicator stuck on 14%. All subsequent upload attempts end with the same progress percentage...
Any idea what the problem could be?
thanks in advance
Anton Kruse

Hi Anton,
Assuming rest of your confirguration in place, check if there are no issues with the content. Validate if it is SCORM. If you have Authoring Environment installed then you could check the content by trying to import it through Authoring Environment. If there are any errors then an error is displayed.
-Ravi Sekhar

Published Course (Captivate 8) not displaying at correct size on Android tablet (HTML5)

I am now publishing my system simulations as both SWF and HTML5. They are set to NOT scale as they should fit correctly on all my client's screen resolutions. The simulations are built at 1006 x 627 pixels.
When uploaded to the LMS and tested on various devices everything displays OK on PC (swf) and ipad (html5) but I'm having issues on Android 4.1.2.and 4.2.2 (Chrome 37).
The whole of the simulation screen should be visual on the Android tablets which have a screen resolution of 1280x800. When taking into account the player top and bottom bars I still have 656 pixels to display the course content. However the 1006 is scaling to 1280 making the course height too high and dropping off the bottom of the screen.
If I publish with 'scaling' turn on the course now fits on the Android screen correctly i.e. height correct with spare width, but on non Android devices i.e. PC with high resolution, the course is now scaling up.
Why is the course not locked to correct size in Android?

Hi,
I have added two images, one from the Android tablet which is stretching the slide to fill the screen width and another from a high resolution PC which is showing the simulation as the correct size.
The android device is 1280x800, the simulation is 1006x627
Trevor

Play course content by LSOAE

Hi Experts,
I created a course content by LSOAE, and tred to pre-play it ,but met "HTTP Status 500" like following.
For the detailed info, please refer the enclosed file.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
java.lang.NullPointerException com.sap.hcm.ls.lms.data.session.CourseStateUpdater.loadCourseFromPath(CourseStateUpdater.java:395) com.sap.hcm.ls.lms.data.session.CourseStateUpdater.loadCourse(CourseStateUpdater.java:193) com.sap.hcm.ls.lms.data.session.CourseStateUpdater.update(CourseStateUpdater.java:142) com.sap.hcm.ls.lms.servlets.control.CourseUpdater.update(CourseUpdater.java:72) com.sap.hcm.ls.lms.servlets.control.EventDispatcher.updateModels(EventDispatcher.java:133) com.sap.hcm.ls.lms.servlets.control.RequestProcessor.doProcess(RequestProcessor.java:100) com.sap.hcm.ls.lms.servlets.control.RequestProcessor.process(RequestProcessor.java:80) com.sap.hcm.ls.lms.servlets.control.Mediator.processRequest(Mediator.java:269) com.sap.hcm.ls.lms.servlets.control.Mediator.doGet(Mediator.java:154) javax.servlet.http.HttpServlet.service(HttpServlet.java:697) javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.9 logs.
Apache Tomcat/5.5.9
How can I fixed the error, Thank you for anybody's helping.
BR
Nani

Hi Chetan
Firstly thank you for your reply.
Now I just create a course content by local PC, and tried to preview the content, so i think it doesn't need to link the CMS address. The content was published on local for preview, the following address like below.
http://127.0.0.1:53887/lms/mediator/courseview?sid=0&language=en
So I am not sure that more something need to configure in locally,
Best regards,
Nani

I have just enrolled to study and my course is online. in order to view any of the course content, i need macromedia adobe flash paper to be able to read anything. Please help....

I have just enrolled to study and my course is online. in order to view any of the course content, i need macromedia adobe flash paper to be able to read anything. Please help....

Use a different device.
Adobe did not develop Flash for iOS devices and has ended all Flash development for all mobile devices.
You could try a different browser from the App store such as Skyfire or iSwifter.

Error occurred while publishing the content item to the Knowledge Directory

We are receiving the following error upon publishing non-binary content items to the knowledge directory:
Error occurred while publishing the content item to the Knowledge Directory. Contact your portal administrator.
Ironically, in the KD, we call see all content items located in Publisher when we are in Edit mode -- even though they haven't been published to the KD yet. In Browse mode, we can't see any content items.
Has anyone see this error before? What could be the cause?
We are using ALUI 6.1.

Hi,
If you are seeing the documents in the Knowledge Directory and in edit mode, but not browse mode then check/try the following. What exactly were you doing when you got the error? Were you in Publisher or in the Knowledge Directory and running the Simple Submit task?:
1. Try to approve the documents in edit mode.
2. Go to the Administrative->Intrinsic Operations and run the following jobs.
--> Search Update 1
3. Make sure you have proper permissions on the folder in the Knowledge Directory and Publisher Folders.
4. Check the permissions on the Content Source for the Knowledge Directory
I need a little more information to get your better help.
tnx
James

Publish the content selectors

Hi
I am Surya ,I am working in bea weblogic portal 8.1
I want to publish the content selectors which is created in the Portal Admin
How should i display the html file which i have uploaded?
When i access my home page ,i could not see the html File which i uploaded in
Content Item(Portal Admin under BEA Repository).
Here is the step which i followed
1.I have created content selector named "Home.sel" in contentselectors\GlobalContentSelectors
Directory
The parameters given are
1.Start Date 1st June 2004
2.I have created Type name "BPO" in the Portal Admin under BEA Repository
The parameters Used are
1.Start Date
2.End Date
3.File(i have Uploaded a html file)
4.Author
3.I have created a Content Item named "June2" in the Portal Admin under BEA Repository
The parameters given are
1.Start Date 1st June 2004
2.End Date 30th June 2004
3.File(i have Uploaded a html file)
4.Author Suresh
4.In my portal,i have added "<pz:contentQuery>" tag in Jsp to see the result in
my "home.jsp" file
<pz:contentQuery id="docs" query="author = 'Suresh'" />
<ul>
<es:forEachInArray array="<%=docs%>" id="aDoc"type="com.bea.content.Node">
<li>The document Author is: <cm:getProperty id="aDoc" name="Author" conversionType="Text"
/>
<li>The document File is: <cm:getProperty id="aDoc" name="File" conversionType="html"
/>
</es:forEachInArray>
</ul>
Can you pls mail me the solution or hint
Thanks in Advance
Regards
Surya

Hi
Use
<pz:contentSelector rule="Home" id="nodes"/>
<pz:contentQuery id="nodes" query="Author = 'Surya'" />
<utility:forEachInArray array="<%=nodes%>" id="aDoc" type="com.bea.content.Node">
<cm:getProperty id="aDoc" name="File" transactionTimeout="30" conversionType="html"
/>
<cm:getNode path="<%=request.getContextPath() +aDoc.getPath()%>" id="myNode"/>
<cm:getProperty node="<%=myNode%>" name="html" conversionType="html"/>
</utility:forEachInArray>
Key word here is
transactionTimeout="30"
Thanks
Surya
"Surya" <[email protected]> wrote:
>
Hi
I am Surya ,I am working in bea weblogic portal 8.1
I want to publish the content selectors which is created in the Portal
Admin
How should i display the html file which i have uploaded?
When i access my home page ,i could not see the html File which i uploaded
in
Content Item(Portal Admin under BEA Repository).
Here is the step which i followed
1.I have created content selector named "Home.sel" in contentselectors\GlobalContentSelectors
Directory
The parameters given are
1.Start Date 1st June 2004
2.I have created Type name "BPO" in the Portal Admin under BEA Repository
The parameters Used are
1.Start Date
2.End Date
3.File(i have Uploaded a html file)
4.Author
3.I have created a Content Item named "June2" in the Portal Admin under
BEA Repository
The parameters given are
1.Start Date 1st June 2004
2.End Date 30th June 2004
3.File(i have Uploaded a html file)
4.Author Suresh
4.In my portal,i have added "<pz:contentQuery>" tag in Jsp to see the
result in
my "home.jsp" file
<pz:contentQuery id="docs" query="author = 'Suresh'" />
<ul>
<es:forEachInArray array="<%=docs%>" id="aDoc"type="com.bea.content.Node">
<li>The document Author is: <cm:getProperty id="aDoc" name="Author" conversionType="Text"
/>
<li>The document File is: <cm:getProperty id="aDoc" name="File" conversionType="html"
/>
</es:forEachInArray>
</ul>
Can you pls mail me the solution or hint
Thanks in Advance
Regards
Surya

How to delete course content (LSO - WBT Training)

I need to know how I can physically delete course content out of the KM without ruining anything in the portal or in the SAP tables. You can mark it as 'obsolete' via the Repository Explorer (right click on the content and you will see the option.) This means it is not available for re-use or for use in a Course Type.
I have a vendor requirement to physically remove the content from servers and I fear that simply marking it obsolete it will not be sufficient.
Regards,
Matt

I was given this bit of information from our LSO implementation partner and these were the steps that were executed. We have tested and at this time this seems to be the best approach.
1. Mark content as obsolete in the AE
2. Access the content folder from the WEBDAV URL, and delete the content from the server.
3. Either mark corresponding course type in the Master Data Catalog to not display on the internet or delimit the course type ( do not delete).
Edited by: Matt Marion on Nov 18, 2009 11:37 AM
Edited by: Matt Marion on Nov 18, 2009 11:39 AM

Problem publishing database contents from non-unicode to unicode system

Hello everyone!
We just set up a new SAP WAS based on Netweaver 2004 as a unicode system. Out problem now is that we have a content management system on our non-unicode system and that we are publishing the contents via rfc to the WAS unicode system to display the contents online. the contents are stored in our own database tables.
The problem thereby is that many texts pasted from microsoft word contain special characters like bullets, long minus or low-9 quotation marks which are not correctly displayed in the unicode system / on the website. we already found out that it has something to do with the codepage. the sap notes say we should use 1160 instead of 1100 and that the transaction SPUMG would be helpful. but we are not able to select any tables there.
so now we do not know what to do exactly. do we have to change something in our non-unicode system or do we have to conversion in our unicode system. and what happends if content containing special microsoft word characters is published after the spumg conversion? do we have to to this frequently?
We would be glad if anyone could help.
Thanks a lot!

Hi Martin,
thanks for your quick answer.
You got me right. We have a local non-Unicode SAP HCM Netweaver 2004 system running a self-developed web based content management system / wiki. The texts entered in the bsp application are stored in a string field in our database table. Actually we publish the contents to a WAS 6.20 non-Unicode system with the same database tables to provide the content via BSP for the public. Everything is working fine including the special characters.
Now we want to replace the WAS 6.20 non-Unicode system by a new WAS 7.0/2004 Unicode system. But when publishing the contents via the same RFC function module to the new system the special characters seem to be damaged. We are not able to replace them with abap commands and when they are displayed on the website we only see "boxes".
If I get you right we have to run SPUMG on our nw 2004 non-unicode productive hcm system, right? but isn't there a danger to damage existing contents?
Best regards,
Stefan

MM Certification syllabus and Course Content of MM

Hi,
Could u pls send me the SAP 4.7 MM Certification syllabus and Course Content of MM. I need urgently. Can anyone help me.
Thanks & Regards,
Leena

Hi,
This link is the best source for practice.
http://www.sap123.com/forumdisplay.php?f=17
Be confident about your answers.
Just study from the standard books provided by SAP and practice these qustions.
Also, try to frame your questions, they really help in solving the certifaction questions during the exam.
ope this will help you.
Regards
Chandru

Dynamic system resolution for portal published BI content

I have a Dev-Tst-Prd ABAP stack BI landscape with a corresponding Dev-Tst-Prd Java stack portal landscape.
My BI developers create reports and webdynpro applications which are then published to our portal and made available via iViews. These iViews refer to the target applications via URLs which contain hardcoded hostnames and port numbers. This makes it a pain when portal content is transported from Dev to Tst and then to Prd.
All my BI systems are known by the SAP_BW alias. I have a different system definition in each portal for the SAP_BW alias pointing to the corresponding BI backend.
Can I use dynamic system resolution for this? If so, how?
I want a URL like http://<devhost.domain>:<devport>/sap/bc/webdynpro/sap/appname to be transportable. Obviously if that starts out as http://dev.mycompany.com:8100/sap/bc/webdynpro/sap/appname, it won't work when it arrives in tst where it needs to be http://tst.mycompany.com:8110/sap/bc/webdynpro/sap/appname. If I could store the URL as something like http://<%JSP SAP_BW %>/sap/bc/webdynpro/sap/appname this could be transportable if there was something in dynamic system resolution to resolve the variable appropriately at runtime in each system.
As a Netweaver administrator, rather than a portal developer, I'm a little lost as to where to even start.

Success! Thank you for your help.
What finally worked?
Create a Portal Component iView of type com.sap.portal.appintegrator.sap
Set URL Template to http://<System.wap.ITS.hostname>/sap/bc/webdynpro/sap/zcs_wd_cc_app
Set System to SAP_BW (where SAP_BW is an alias for the System entry for the system where we want the WebDynpro app to run)
Where did the help come from?
SDN (Mr Nicholls in particular)
SAP Help (http://help.sap.com/saphelp_nw70/helpdata/en/21/dfd241cb76c417e10000000a155106/frameset.htm in particular)
Where did the parameter value reference come from?
The "wap.ITS.hostname" attribute name came from the portal's system definition for SAP_BW. Under System Administration -> System Configuration -> System Landscape -> Portal Content the entry for the SAP_BW system can be displayed. In that system entry there is a field labelled SAP ITS host which contains the fully qualified hostname and port number for the ITS server delivering my application. Expanding the detail of this field (click the arrow head beside the name) shows its Property ID to be wap.ITS.hostname.
So this last answers my earlier question about where to find the valid contexts and attributes per context for the variables to substitute in the URL template. The contexts are the names of the fields available to configure the iView, the attributes are the Property IDs of the relevant information fields in the obect described by the context.
Note: This solution ended up only being required for WebDynpro content. The generated URL for WebDynpros appears to resolve any load-balance ITS URL to a specific host and port before publishing, the method here leaves the resolution until runtime - a great advantage in performance and flexibility.
The Web Application Designer published report content was generated in a transportable form already.

Error uploading published course to LMS

I am receiving an error message when I try to upload a published course into my LMS. The file is really big (583 MB) so not sure if that is the problem. I have been able to upload all my other published courses - which are smaller - with no problems.

You're probably correct that the sheer size of the SCORM package is the problem. Most LMS servers have some kind of upper limit on the upload size. This is usually in the range of 50-100 megabytes, though I have seen several that were lower than 20 meg. I've never seen an LMS that would welcome a 500 meg SCORM by default.
Error messages are not often going to tell you EXACTLY what the issue is. So check with the LMS Administrator to find out what the upload size limit is.

Fail to publish iWeb content

Already been 2 days having troubles in publishing iWeb08 content (using Mac)though .Mac keeps saying the problems have been fixed.
But me always getting this message :
Publish Error : An error occurred while publishing file “......” or "rss"(or this and that). Try publishing again later.
So just wasting my time sitting and waiting and can't do nothing ~~~
Anyone has a clue ?
Many thx !
PS.
Is it the problem with iWeb08 or is it .Mac ???
Message was edited by: Echo Wong
Message was edited by: Echo Wong

Some say it's a problem introduced with the QuickTime 7.2 "iLife compatibility" update...
http://www.macfixit.com/article.php?story=20070914105332918
...you can send Apple feedback via this form:
http://www.apple.com/feedback/iweb.html

FDM Reports publishing empty contents

Hi All,
We upgraded FDM from 9 to 11.1.2.1 approximately two years back.
The testing was not conducted as the hole and later the issues are raising, Now the problem is No Reports are publishing with contents. Means report window opens with empty content. An additional information that I am able to see the RPX files in the report folder in the installed path. So they migrated the report artifacts also.
Please suggest me how to debug this issue.
Thanks & Regards,
KR

First of all, if they are all doing it, I'd be suspect that some type of configuration item is to blame. What happens if you make a new report?
To help narrow this down, here's what I'd do...
#1 - Go to Server and open Workbench client
#2 - Login / Open App
#3 - In the window pane on the left that Shows Adapters, Scripts, and Reports, click on Reports.
#4 - Find one of the reports in question
#5 - Double click on report which should open the Report Properties window
#6 - Click on the SQL Statement tab
#7 - Click on the Zoom button
#8 - Click on the Preview Data button
If no data here, there is EITHER some form of a communication issue between FDM/Reports and database. or there's no data....
Then I'd .....
#1 - Copy the SQL Statement
#2 - Connect to SQL Server and execute query against database to see if data is returned.
If data is found, there is a communication issue (physical or user access to tables) between FDM and your database, review database settings to confirm that settings look correct on FDM And confirm in the database that the user being used has access to the tables
being referenced...
If you did get data from the query, then I'd look more carefully at the report itself.
#1 - In reports panel on the left, right click on the report you are investigating and Design Report
#2 - Verify the report open in the designer correctly.
#3 - At the top of the report area are two tabs, Design and Preview. Click on Preview and it will then generate a report. Verify if this is working.
Depending on how that turns out, you might get more clues as to where to look next.

Publish Course Content

Similar Messages

Maybe you are looking for