Publish different than design

When I publish a page I have done in Adobe Muse, often some of the items are in a different spot (or not lined up properly) than what I have on the design page.
What is the reason for this?

Hi,
Please refer to the following link http://forums.adobe.com/message/5896091#5896091
Regards,
Aish

Similar Messages

Publishing different than preview

I am working on a training video series about Moodle. I have carefully previewed the project to confirm that everything is timed correctly and matches the audio.
However, the published version displays something much different than the preview. Errors include:
- 1 slide displays smaller and in the top left corner instead of the full screen area, making all the highlights wrong
- images from one slide are staying around on another slide
- transitions (fade in/fade out) do not look right in the published version
What is going on?

I publish these videos in mp4 format.
I do not understand how the publishing mode would be the issue because I have successfully published over 20 videos using the same mp4 mode. These errors seem like a publishing bug that does not happen all the time.
Am I missing some kind of setting that will allow the publish to produce the same thing that I see when previewing my work?
Additional errors found with other recent videos:
- audio cuts in and out (plays correctly during preview)
- text does not appear (appears during preview)
Is there any way this could be a computer issue rather than a Captivate issue? It seems Captivate related since I am publishing from Captivate...sometimes the videos turn out right, sometimes they have these random errors. However, Captivate does run slowly on my computer - would that be a cause for publishing problems?
Thank you for any direction that you can provide.

IWeb published site different than designed

I scrolled through numerous pages and was surprised I did not see this problem already described.
I design a simple (though long) page using iWeb. Text and images only. The images are embedded, but non are overlapping. It looks great as I am working on it in the iWeb window. I publish it to a folder on my laptop then view either by using "visit published site" or going to the directory and firing up the index.html. There are lots of problems - images have been moved, fonts are wrong (there looks to be a "format persistence" problem -- a type or size will continue for a few extra words. I edit, making sure the fonts are the ones I want and re-publish with the same poor results. Not very WYSIWYG at all! I'd try to edit the html code, taking the iWeb written stuff as a pretty good start, but it is not very pretty html.
So, at this point iWeb is a completely useless program! As many others are using it without this problem, there must be some solution. Anyone had this issue and found a way to fix it?
thanks

What is the web address of the published site so we can see what you are referring to?
While waiting for that:
A common reason why formatting on a published page will not match what you see in iWeb is that objects (pictures, movies, text boxes, etc.) are overlapping. When the web browser goes to try and interpret that overlap the results can vary (this can effect the display of fonts as well).
Go to the page in question in iWeb and click on 1 object. Go to Edit > Select All.
You will see all the objects on the page with their boundaries activated. Move any items that are overlapping so they have their own space around them.

Published Page Looks different than designed in IWeb

It's the oddest thing... I designed the site, using a blank template and building it from scratch. Every page displays fine, except for this one. It looks perfect in IWeb, but when published, even to my desktop folder, certain parts of two text boxes are transparent, showing the background behind it.
Here is the link to the page so you can see what I'm talking about:
http://www.terrybowdenfootballcamp.com/AboutTheCamps.html
Any ideas? Any help is GREATLY appreciated!
Thanks
Kim in FL

It appears that on the About the Camp page your text boxes don't have the fill enabled as they do in the other pages letting the page background show thru. Try clearing the text boxes and reapplying the fill. Or copy a text box from another page, replace the text with that of a problem box and see if that will fix it.
Another general fix would be to close iWeb, delete the iWeb preference file, com.apple.iWeb.plist, reboot the computer and try again.
OT
Message was edited by: Old Toad

Colors are previewing differently than design mode

Anyone run into this problem before.... I've got a picture that looks way darker/desaturated in design mode than it does in preview mode. It doesn't happen with all pics, but it's a little irritating.
See pics (the second one - Preview mode - is correct):

Yes same issue. On the left is design mode. On the right is the preview in the browser. The preview in the browser is correct. This site was built in the previous version of Muse.
Something needs to be done about this quickly or I see no point in using this software. It is visually inaccurate.

Format text (Preview is different than Design)

On my WIP site I cannot get the text in one box center aligned. It looks fine in Design but not in Preview or online. Have tried everything I can think of.
Please look at brownelllibrary.businesscatalyst.com on the page "About Us" under Limits and Loan periods and lt me know how to solve this problem.
Thank you.

Hi,
When you edit the text of the text box you can press 'Ctrl+A' on windows or 'Command+A' on MAC to select all the text. That way you can determine the empty spaces. I'm afraid that in Muse you can't get the spaces to display like the way it does in Word.
Check this screen shot,
I have pointed out the spaces in the text editor.
Regards,
Abhishek Maurya

Website is Published Differently than I Created.

I created a website in Muse 2014 and it looked perfect in my in browser preview. When I published it to my FTP it went live completely off. The background doesn't fill the browser and everything is off to the left. A couple of pages even have buttons that are off the background. Any reason this should have happened?

Hi Scott,
Please share your site's URL so that I can have a look and suggest accordingly.
- Abhishek Maurya

Viewer Looking Different than Designer

Hi. I've upgraded version from CrystalViewer10 to CrystalViewer11. I have 2 question to ask. 1. Currently I used CrystalViewer11. I've created a report using Cross tab wizard. I used function DisplayString to display my recordnumber in crosstab. The recordnumber (in DisplayString formula) are print out well in desinger..1,2,3,4,5...10.Anyhow..it does not happened in viewing. The result printing just 1,1,1,1,1,1...1. Did I miss something class / component? 2. In CrystalViewer10, while viewing the report, I can export to PDF but it does not happened after I've change to CrystalViewer11. The result are print out with condition (problem no 1) & come out this error while trying to convert. <img src="/C:%5CDocuments%20and%20Settings%5CAdministrator%5CMy%20Documents%5CMy%20Pictures%5Cerror_pdf" alt=" " /> Error: com.crystaldecisions.reports.a.a(Ljava/util/Properties;)V Please kindly advise.-AN- 

Try adding a copy merged layer to the top of the stack before flaterning (Shift Alt Ctrl e)

Acrobat 9-forms-Radio buttons print different than check boxes

I am using Acrobat Pro 9 to create forms.
I've used both radio buttons and check boxes (that are circles).
Forms were designed in InDesign with Zapf Dingbats as the open circles to be filled in.
I used radio buttons when the user had to pick one over the other.
I used check boxes when there were multiple choices or I wanted the user to be able to uncheck a box. (I used the circle style so they would look like radio buttons).
The radio buttons are printing differently than the check boxes. It looks almost like there is an overlay on top of the actual open circle created by Zapf Dingbats.
I checked the "appearance" window and there is no border or fill color on the radio buttons (same for the check boxes).
Under the <general> tab, <common properties> is visible. I'm assuming it should be in order for the radio button to appear on the form.
I would appreciate any input as to how to fix this.
Thansk!
Maureen

That's just the way radio buttons are, and one reason I rarely use them in preference to check boxes. If Adobe wanted to, they could allow you to use any appearance you want for both the selected an unselected state of a check box or radio button, but they've actually further restricted your options over the years.

FPGA: compilation error: size of concat operation is different than size of the target

Today I got an error, for which I couldn't find a solution.
I use the PXI-7813R FPGA, with Xilinx tools 10.1
At compilation, the error I get is:
Compilation failed due to a Xilinx error.
Details:
ERROR:HDLParsers:804 - "C:/NIFPGA/jobs/TESY1S8_X4PR8hn/NiFpgaAG_000000ce_CaseStructureFrame_0000.vhd" Line 301. Size of concat operation is different than size of the target.
ERROR:HDLParsers:804 - "C:/NIFPGA/jobs/TESY1S8_X4PR8hn/NiFpgaAG_000000ce_CaseStructureFrame_0000.vhd" Line 372. Size of concat operation is different than size of the target.
-->
Total memory usage is 185944 kilobytes
Number of errors : 2 ( 0 filtered)
Number of warnings : 0 ( 0 filtered)
Number of infos : 0 ( 0 filtered)
Process "Synthesis" failed
Start Time: 18:25:26
End Time: 18:28:54
Total Time: 00:03:27
What can cause a concat size difference?

This is by the way the configuration:
Project: FPGAWrapperMG100125AOD.lvproj
Target: FPGA Target (RIO0, PXI-7813R)
Build Specification: fpga_integrator_AOD_random_access
Top level VI: fpga_integrator_AOD_random_access.vi
Compiling on LabVIEW FPGA Compile Cloud Service
Compilation Tool: Xilinx 10.1
Start Time: 05.07.2011 19:06:12
Run when loaded to Fpga: FALSE
Xilinx Options
Design Strategy: Custom
Synthesis Optimization Goal: Area
Synthesis Optimization Effort: Normal
Map Overall Effort Level: Default Xilinx setting
Place and Route Overall Effort Level: High
JobId: FNW72uPWorking Directory: C:\NIFPGA\compilation\FPGAWrapperMG100_FPGATarget_fpgaintegratorAO_9D5B4237
The Xilinx log is attached.
Attachments:
XilinxLog.txt ‏80 KB

Actual work in MS project project is different than PWA Business Intelligence report

Hi
Actual work in MS project project is different than PWA Business Intelligence report
(Numbers are different) Di u know why?

Hi Project help,
As mentionned before, I suggest you to open the period, recall the timesheet, update actuals and submit
it, approve it by the project manager, open the plan and publish it.
The steps can be performed using a delegation session if you don't want to bother the team member and the
project manager.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Dreamweaver CS4 Preview Different Than Live?

Hi,
I need help/guidance figuring this out:
when the page is displayed in Dreamweaver CS4 design view the top menu is aligned properly, the font size is according to the CSS code and all other tags like H2 or H4 are properly displayed
same when I choose to see the new page in "Preview In Browser" (F12) in Firefox or Safari (I'm on Mac Book)
if I choose to preview the new page on "Live View" or after uploading to the server and view it in any browser suddenly the top menu is left aligned and all H tags are not displayed correctly.
This is a new development so the URL is on the hosting server as an IP: http://65.254.68.145
I tested with W3C and it passed.
Any pointers are appreciated.
Thanks,
Joseph

Thanks SnakEyez02 for your reply,
Most of the time I use "Preview in Browser" or [F12] and that shows me the same as the design view which in this case is different than actually viewing the page on the web server (live). I do understand your point for setting dimensions on the menu box and I'l do those changes, but maybe you can also give me your opinion for the H2 tags, as you can see in the 2 images attached to the original post, bellow the menu there are H2, H3 and H4 tags and they look different as well, it's like only part of the style.css is applied.
Thanks,
Joseph

ESSO PG on something different than MS AD

Is it possible to make PG (from 11.1.1.5.1 ESSO distro) functional on something different than MS AD, like ADAM? I deployed the ADAM, LM and PG (both client and server). LM works successfully and (after first sync) created ADAM nodes (of class vGOUserData) in OU=People,dc=domain,dc=local container. Keeping in mind that (in MS AD case) for PG to add user logon I should first manually create user and only after that use "Add New SSO User" link. So, I manually created two semi-empty nodes of class vGOUserData too ("semi-" - due to lack of data to put in very special attributes, including encrypted ones). After selecting "Manage SSO Users" - "Find User(s)" PG successfully shows me all created users (both from LM and manually created). But when I try to add new logons (no difference, for "LM" or "manual" user entries) PG shows me error message saying that "System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: The local computer is not joined to a domain or the domain cannot be contacted". What's wrong with it (ADAM & PG are deployed on standalone Win2K3 Server)?

Update: seems that ESSO PG simply doesn't works on LDAP servers other than MS AD. It doesn't works at all. I tested it on ADAM and DSEE. Problems with ADAM are difficult to research, because traffic is protected via GSS-API, so I simply can't sniff network traffic as it encrypted. But as for DSEE, problems are described below:
Documentation (Oracle® Enterprise Single Sign-on Logon Manager Best Practices: Deploying ESSO-LM with an LDAP Directory Release 11.1.1.5.0 E21003-01) says about locator object: +"You must create the vGOLocator object at least at the same level as the container that holds user accounts. Ideally, vGOLocator should exist inside the directory’s user accounts container"+. So I created LDAP structure as shown below:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|---------(+)-ou=SSOConfig
As you can see, structure looks quite correct: vgoLocator "ideally exist inside the directory’s user accounts container", right?
Than I setup application templates, filled LM settings (via LM Administrative Console), wrote them into registry hive and published all those settings into LDAP (DSEE). It works correctly and LDAP structure now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator (created manually)
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator (created by LM while performing LDAP sync)
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1 (created by LM admin console while publishing settings into LDAP)
OK, now LM works perfectly, but we want to create centralized system, right? So I had to deploy PG. It was deployed and started. The first task was to correctly fill storage settings. I used values as shown below:
Storage Type: Oracle Directory Server Enterprise Edition
Server: esso.hq.domain.local:1389
Root DN: dc=domain,dc=local
User Path: ou=Users,dc=domain,dc=local
Connect as User: cn=Directory Manager
Password: **********
Use secure connection (SSL): no
Use configuration objects instead of application list: yes
Role/Group support: no
Configuration and role/group objects root DN: ou=SSOConfig,ou=ESSO,dc=domain,dc=local
Admin Group DN:
User PrePend: UID
Config looks OK, isn't it?
But when I tried so save settings, I got error "Cannot find any configuration objects". Metalink shows me two articles on this problem: 1305060.1 (says that i must not use space in Configuration and role/group objects root DN). Can you see any spaces in "ou=SSOConfig,ou=ESSO,dc=domain,dc=local" string? Next article was 1298762.1 that says that "This is because the container you have listed in the Storage Setting titled 'Configuration and role/group objects root DN:' does not contain any ESSO objects such as templates or password policies". But that container really contains ESSO objects (three, to be more precise), so that wasn't the solution too.
OK, let's look in depth... I installed wireshark and captured network traffic from PG to LDAP. There was four LDAP-related calls:
1. PG searches object ou=vgoLocator,dc=domain,dc=local. LDAP says "no such object" (of course, because we read documentation and created locator in "ideal" container - inside Users container). WHY? WHY it tries to find it there???
2. PG searches LDAP for dc=domain,dc=local. LDAP says "OK"
3. PG searches LDAP for ou=Users,dc=domain,dc=local. LDAP says "OK"
4. PG searches LDAP for ou=SSOConfig,ou=ESSO,dc=domain,dc=local. LDAP says "OK"
That's all. No more LDAP requests, PG simply throws an error as shown above.
"OK" - said me to myself, let's create locator at the position, where PG expects it to find, i.e. at ou=vgoLocator,dc=domain,dc=local. Wow! PG now accepts settings entered earlier and I almost become happy. LDAP now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
So, let's play with users, yeah? Let's click on "Manage SSO Users" and have some fun? But PG tells me "Invalid storage settings" error... WTF??? OK, let's start network sniffer again and look, what's happened. Oh-oh... Wireshark shows me that PG tries to logon onto LDAP using credentials "UID=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" and LDAP declines authentication requests. BTW, ESSOPG\SVC_SSO is a local user, used (according to documentation, of course (looks like it's now my favorite phrase)) by IIS as anonymous user. WHY??? Why PG uses that user instead of "cn=Directory Manager", that I entered into storage settings five minutes earlier???
OK, if PG wants that user, let's create him in LDAP, yes? So I created such an user in LDAP and now it looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---------(+)-uid=ESSOPG\SVC_SSO
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
Test with LDAP browser shows that I can access LDAP using that newly created user. Just one thing: according to LDAP rules, I have to use double slashes in logon name: "uid=ESSOPG\ \SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL". But PG doesn't know anything about such a rule and simply passes "uid=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" (with one slash) to LDAP. LDAP declines auth request. What to do now? Eureka! Let's enter two slashes directly into PG settings! So, let's go to "Web Service Account" page and add one more slash into "User Name" field. Now it contains value "essopg\ \svc_SSO". Cursor moves to "Save" button, clicks on it....
PG shows me an error message: "Please enter the User Name in format "domain\userid".".....
I surrender. I have more than fifteen years experience in software development and information security, but I can't setup such a "simple" solution...
P.S. I asked local Oracle representative: "have you ever tried to deploy PG on non-MSAD LDAP?". He answered "NO, because it's a very common way - to use existing MS AD to store outside data". Very strange opininon:
1. MS AD are owned and supported by IT department
2. IT security projects, like E-SSO are pushed into company by Security department
3. 1 + 2 means that "The less impact the new solution will make on existing IT infrastructure (BTW, MS AD schema extension and storing outside data in it is a VERY big impact) - the easier the implementation process will be too". It's sad that Oracle doesn't understand such a simple thing
P.P.S. He also told me that "if something doesn't works, I should create SR". But there is some problem: in order to customer to buy ESSO and support (required to create SR's) I have to persuade him to use such a solution, right? Solution, that currently doesn't works? So, there's the only way remains: I have to buy SR's and create request on my behalf. But what must such an SR include? Phrase "Product doesn't works at all"? Oracle tries to get money several times for single work (once from me, because I have to buy SR in order to make Oracle's product work, and than from customer, who will buy the product itself)? Right?
P.P.P.S. Forum engine shows two slashes as line feed, so I had to insert space between them in order to show them correctly

Why is the contents of Safari's downloads folder different than the actual folder?

Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.

I am having a problem with homesharing on my apple tv. The email address on my tv is different than what I am registered with. How do I correct the email address that is being displayed under home sharing on the apple tv?

Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?

turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't

Publish different than design

Similar Messages

Maybe you are looking for