Publish error - error determining the .Mac publish configuration values

I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
Thanks mucho!
MacBook 2GHz, 2GB Mac OS X (10.4.8) shipboard satellite internet connection

Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

Similar Messages

Getting a heap error while opening the BI Publisher Console login page

Hi,
I have installed BI Publisher 10.1.3.4.2 on OC4J on Windows 7 OS and getting the following error on opening the BI Publisher Login Console.
*2013-04-30 20:44:31.921 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page*
*: Exception:oracle.jsp.provider.JspCompileException: <H3>Errors compiling:C:\Ora*
Home_2\oc4j_bi\j2ee\home\application-deployments\xmlpserver\xmlpserver\persisten
ce\_pages\\_login.java</H3><pre>Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heap
*</pre>*
Thanks !

set the JAVA_HOME environment variable to point to the same location where the JDK for OC4J standalone is located

Error while determining the form function module

Hi everyone,
We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
Anyone has an idea what can cause the problem? Any help is greatly appreciated.
Thanks in advance!
Regards,
Sophie

Viktor,
Thank you for your answer, it solved our problem!
Regards,
Sophie

Error when determining the CTIADM_PROF profile for agent xyz

Hi,
I have created the new cic frame work and assigned it to the position. when i run the TC - cic0, I am getting the following
"Error when determining the CTIADM_PROF profile for agent xyz"
Can you help me out ?
Thanks in advance

Hi Devi,
Problem is your IC winclient profile definition don't have any profile definition for CTIAMD_PROF assigned to it.
For this you can use standard profiles or may create your own CTI Component profile.
Follow IMG path:
Customer Relationship Managemet>Interaction Center WinClient>Component Configuration>Hidden Components>Configuration of CTI Component-->Define CTI Component Profile
Use this profile defintion to assign it to CTIAMD_PROF in you IC winclient profile definition.
Best Regards,
Pratik Patel
<b>Reward with POints!</b>

Error while determining the currency types for PO

Hi,
When running MR11 on PO4534356339 (account maintenance) the following error msg appears:
Error while determining the currency types for 4534356339 00030.
Message no.C+171
Check the configuration.
I have checked all currency settings and found ok. Material ledger is activated for this plant. It looks like there is problem in Item 30 of the Purchase order is having problem.
Best Regards,
MR

Hi,
Please refer this link :
MR11 error - Error while determining currency type - C+, 171!!!
Regards,
Pramitha.

Error when determining the inbound interface

Hi Experts,
I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
Runtime error
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
Scenario Steps
1) No Condition in Interface Determination
2) 0..unbounded in Message Mapping and Operational Mapping.
3) E1KNA1 is mapped to E1KNA1
4) E1ADRMAS is mapped to E1ADRMAS
5) One Message Mapping and 1 Operational Mapping.
Thanks in Advance.
Sriram.

Hello,
I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
Since your scenario makes sure that the 2 files are created, there is no need to use multi-mapping. Rather, you can use an interface determination split. To do this:
1. declare xml_file1 as service interface 1, xml_file2 as service interface 2
2. do not change target occurrence in message mapping and operation mapping, maintain it as 1..1
( 2 operation mappings)
3. in ID, add the two service interfaces in your interface determination
At runtime, it will split into two inbound interfaces.
When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
Runtime error
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
Were you able to declare the 2 xml_files as two separate service interface(different names) in your operation mapping?
Hope this helps,
Mark

Travel Display Form: Error while determining the form function module

Hi,
In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
"Error while determining the form function module"
Can anyone have idea on this?
Regards,
Boobalan

Hi,
This error was due to Not supported platforms of ADS (Adobe Document services)
It was not supported on itanium64 bit processors.
Please check where the ADS is supported in service.sap.com/pam
You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
Please refer the ADS Config Doc for details.
Hope you also solve this problem.
Regards,
Boobalan

Error when determining the PSA name

I am on BW3.5, trying to load a delta that has been loading for 2+ years with no problems. The load today is getting the error message: "RSAODS 132 Error when determining the PSA name"
I've looked in OSS Notes and there is nothing with this error message. This is CCA Actual data that loads to PSA > ODS > Cube. The PSA load is red and the entry in the ODS is also red. Thanks

Hello Keith,
Not sure just check following, might help.
This might be because of insufficent authorization ( did you changed anything on authorization company wide decision?)
Or this might be brcause of insufficent tablespace or something?
Sarhan.

Error when determining the CTIADM_PROF profile for Agent 1010301

Hi,
here problem is while opening the cic win( Trn : CIC0 - Customer Interaction Center) it's throwing <b>error when determining the CTIADM_PROF profile for Agent 1010301</b>
pls. any ideas would be greatfull.
Thanks

Hi,
please check the following.
1. Make sure in the CIC profile (transaction CICo), a profile category
CTIADM_PROF is there and a valid profile is assigned.
Or, if no telephony should be used, make sure telephony and its com-
ponents are switched off on the CIC framework (transaction
CRMC_CIC_FW_MAINTAIN)
2. in the standard system, when you start your CIC, the framework is
taken from the highest org-unit and the components are taken from the
lowest level.
If you use more then one level of org-unit, please make sure that they
use the same framework to prevent the mentioned problems.
hopefully this helps!
Regards, Gerhard

I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

SparkchaserEd wrote:
I am getting an error when resizing the Mac HD.
What does this error say?

Error in Determining the Business System??

Hello All,
I am using a client proxy from ECC 6.0. When I try to run it manually, it is giving error saying "GET_BUSINESS_SYSTEM_ERROR: An error occured when determining the business sytem
NO_BUSINESS_SYSTEM ".I have already created Business System.
What could be the reason for this.?? SLDCHECK is working fine. entries in RZ70 are also correct.
Same proxy in CRM 2007 system is working fine.

Read,
ABAP Proxy error : GET_BUSINESS_SYSTEM_ERROR
Dump "GET_BUSINESS_SYSTEM_ERROR" when changing relationships.
They might help
Regards
Juan

Error in determining the cost estimate while running cost collector (KKF6N)

Hi,
My client is trying to run the cost collectors in t-code KKF6N. The error reads as under:
u201CError determining the cost estimateu201D.
Prior to this he was experiencing problems with the costing of 3 different SKUs which appear in one of his Z report.
Kind Regards,
SD

Hi,
Send the details of Error message.
Thanks
S.Subbiah.

I need the steps to publish my game to the Mac App Store.

Hi
I am working on a project using Unity3d game engine, it started as a free game but i thought that i could create something that sell so i need all the steps to be mac developer to be able to distribute my finished game at the Mac App Store!
Please notice that i am not from the USA, and there is no app store for my country, is that gonna be a problem regarding me getting paid?

Hi Imacyh, and welcome to the Dev Forum!
imacyh.com wrote:
... i need all the steps to be mac developer to be able to distribute my finished game at the Mac App Store!
Start at the [Mac Dev Center|http://developer.apple.com/devcenter/mac/index.action]. Everything you need is there.
Please notice that i am not from the USA, and there is no app store for my country, is that gonna be a problem regarding me getting paid?
No. When you join the Mac Developer Program you'll get instructions on how to set up your bank account and how to place your app in the correct stores.
\- Ray

How to determine the mac address of an ATM interface

Hi All,
I have a router with an SHDSL controller. I am doing some troubleshooting and there seems to be an ip address conflict on the layer 2 shdsl network.
I am trying to figure the mac address of my atm sub interface. An ip address is set on the controller.
interface ATM0/0/0.1 point-to-point
Does someone know the command for finding it?
sh arp does not show the interface itself.
Can you please help.

Invalid command
#sh atm ?
arp-server          ATM ARP Server Table
bundle              ATM bundle information
class-links         ATM vc-class links
ilmi-configuration Display Top level ILMI
ilmi-status         Display ATM Interface ILMI information
interface           Interfaces and ATM information
map                 ATM static mapping
pvc                 ATM PVC information
route               ATM route
traffic             ATM statistics
vc                  ATM VC information
vp                  ATM VP information
The command is not available :(

Error while running the BI Publisher using burst option

Hi,
I am new to BI Publisher.I have a requirement where I have to save my report to different files based on the department category.
Going through the net,I found the followiing link which explained what I required.
http://www.oracle.com/technology/obe/obe_bi/bipub/advance/advance.htm#t4s2
But I am getting the following error
Job ID 104
Job Name Bursting2
Job Owner administrator
Report Name Bursting2
Report Scope Private
Job Schedule Run at 3/8/10 3:03 PM
Bursting mode On
Job Execution Information
History ID 104
Status Failed
Start Processing Time 3/8/10 3:03 PM
End Processing Time 3/8/10 3:03 PM
Time Elapsed 906.00 millisec
Bursting Definitions
Bursting Node /ROWSET/ROW/DNAME
Delivery Node /ROWSET/ROW/DNAME
Delivery 1 :
Delivery Key RESEARCH
Delivery Type FILE
Status Failed
System Message C:\kuleena\RESEARCH.pdf (The system cannot find the path specified)
Delivery 2 :
Delivery Key SALES
Delivery Type FILE
Status Failed
System Message C:\kuleena\SALES.pdf (The system cannot find the path specified)
Please help me out on the same.
Thanks and Regards,
Kuleena

Hi,
Just a doubt.
I tried running the above report from the machine where BI PUBLISHER has been installed,I was able to save reports with different names to the folder.How can I run the report from my machine?What path should I give when we do not run from the server?
Following was my bursting query,
select NVL(d.dname,'SALES') KEY, 'Template2' TEMPLATE, 'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE, 'PDF' OUTPUT_FORMAT, 'FILE' DEL_CHANNEL, 'C:\kuleena' PARAMETER1,
d.dname || '.pdf' PARAMETER2
from dept d
Kindly reply.
Edited by: K Tanna on Mar 11, 2010 2:12 AM

Publish error - error determining the .Mac publish configuration values

Similar Messages

Maybe you are looking for