Publish error: failed to create chr_book_op.gif
I'm using RH10 as part of TCS4. Multiple projects that are routinely updatedfor the past 10 years suddenly (since the last update) now all fail during the Publish operation with an unhelpful error "Failed to create chr_book_op.gif." The projects generate without error so this is not a problem within TCS4. Since the error occurs in multiple projects, I assume it is a connectivity issue. To test, I verified that I can manually (using Filezilla) FTP all files to the target Web site so I know the FTP settings are valid. I have verified that the Filezilla FTP settings are the same settings as defined in the project's Publish settings. The only thing that changed since the last update is that I swapped out a broadband modem. Everything works correctly with the new modem, and I assume that since I can successfully manually FTP, the modem is not the source of the problem.
Has anyone seen this error before? I'm at a loss as to how to further troubleshoot. It would be a nuisance if I cannot use RH's Publish functionality.
Hello Anjaneai,
I created a test project (as WebHelp). It generated correctly but again failed during Publish at the same file (chr_con_out.gif) that causes all of my other projects to fail. The .gif file is present in all of my projects and is part of the standard Chrisi skin. Here is a screenshot of the error:
I generated the same test project as FlashHelp. It generated correctly but failed during Publish. I don't use FlashHelp, so I don't know how to interpret the error. Here is a screenshot of the error:
There were no errors to indicate a problem with the FTP connection.
Thank you for your help.
Carol
Similar Messages
-
42001 Presenter Publish Error Can't create uploader unknown error
42001 Presenter Publish Error Can't create uploader unknown
error
Well I guess that about says it all. I cannot publish ANY of
my Presenter files to Connect Pro... Do I need to do a Presenter
reinstall?I know this is from 2010 but I just started with a company that uses this software and we are receiving this same error. I tried doing the regsvr32 ppsuplo.dll but came back with the following result " The module "ppsuplo.dll " failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. I then looked in the program files folder for presenter and found the file right there. Then tried using the repair option without any luck. Anyone have an idea of what else we can do?
-
Hi Experts,
We got a problem here.
We have a query ran without any problems in RSRT. But when I try to put it as data sources(infoprovider) in APD.
I got following error:
column store error: fail to create scenario: [340 2048
We are in BW731006 & ABAP731006.
Any advise?
Thanks in advance!
TengranHi,
Can you check this part in error mentioned by clicking as highlighted in red box. It will give you a correct idea about the issue ::
Also share the detailed error with us as well.
Best Regards,
Arpit -
Hello all,
I am new to FIM and am currently in the process of setting-up a PeopleSoft
Web Services MA. I am receiving the following error in the FIM Sync Manager in the Create Management Agent dialog in the Global Parameters section:
“Test Connection failed with the following error: Failed
to create a ‘RequestMessageMemberType’ from the text d:Find__CompIntfc__CI_PERSONAL_DATATypeShape’. Below is the information about configured endpoint address(es): http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV”.
I had no issues with the discovery process in the Web Services Configuration tool. The following parameters were supplied for the config file:
WSDL:
http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV/PSCONNECTORWEBSERVICE.1.wsdl
Namespace:
targetNamespace
Basic authentication <user>, <password>; Interoperable:
PasswordText
Has anyone else received this error message or can anyone give me some advice on how to troubleshoot? Any help would be greatly appreciated.
Thanks.Hello all,
I am new to FIM and am currently in the process of setting-up a PeopleSoft
Web Services MA. I am receiving the following error in the FIM Sync Manager in the Create Management Agent dialog in the Global Parameters section:
“Test Connection failed with the following error: Failed
to create a ‘RequestMessageMemberType’ from the text d:Find__CompIntfc__CI_PERSONAL_DATATypeShape’. Below is the information about configured endpoint address(es): http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV”.
I had no issues with the discovery process in the Web Services Configuration tool. The following parameters were supplied for the config file:
WSDL:
http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV/PSCONNECTORWEBSERVICE.1.wsdl
Namespace:
targetNamespace
Basic authentication <user>, <password>; Interoperable:
PasswordText
Has anyone else received this error message or can anyone give me some advice on how to troubleshoot? Any help would be greatly appreciated.
Thanks. -
Xcode ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I installed OX 10.8 and xcode 4.4 and when I run any simple application for simulator it generated error in console:
Xcode[7808]: ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I reinstalled with clean xcode, but it did not help. I see the building freeze when "coping 2 of 2 resources to product
Also, xcode freezes when I jusy click on Mainstoryboard.storyboard file.
I found a few posts with the same ERROR but no clear fix. Any help will be appriciated.Hi, i had the same problem yesterday and after searching I found no solution to this error.
Today i just burned the original Mountain Lion.dmg to a portable hard driver then reinstall the OS. And it seemed that the os had been restored and the error had been fixed.
And, i guess there's some app that changes some documents of the system. So when you rewrite the os, u get the bug fixed.
Good luck to you guys. -
Publish Error: Can't create the file "shapeimage_2_link_0.png
SOS!!
very urgent and important..I am becoming mad! First of all good night from Italy.. I use Iweb 1.1.2..and after 2 yrs I am working on this site http://web.mac.com/cat_toons/iWeb/feline-care/Welcome.html I need to release for a donation project, when publishing at almost the end I get this pop-up window:
Publish Error: Can’t create the file “shapeimage2_link0.png.” The disk may be damaged, full, or you may not have sufficient access privileges.
Now, i cancelled and re-installed I web + all updates, but nothing happened, I am stuck! I do not know which is the file missing or giving error
Any news? what shall I do?well, after a few tries I checked the point were it stoped uploading and I create a new page from scratch copying all images from scratch and it worked.
Idt does not work if you duplicate a page, you have to create a new one..possibly differentI.E. instead of MOVIE I chose the blog one.
It worked out
Baci -
SCCM 2012 Client Error Failed to create registration request body. Error: 0x80070057
Hi,
While installing sccm 2012 R2 Client on server 2008 R2 ClientManagerStartup.log shows below error
Failed to create registration request body. Error: 0x80070057
KiranTorsten is right, please post the entire ccmsetup.log and client.msi.log.
Daniel Ratliff | http://www.PotentEngineer.com -
VBoxManage: error: Failed to create a session object!
When I run
vagrant up
I get the following output:
Bringing machine 'default' up with 'virtualbox' provider...
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["list", "hostonlyifs"]
Stderr: VBoxManage: error: Failed to create a session object!
VBoxManage: error: Code NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) - Class not registered (extended info not available)
VBoxManage: error: Most likely, the VirtualBox COM server is not running or failed to start.
I tried directly running
VBoxManage list
and I get this output:
VBoxManage: error: Failed to create a session object!
VBoxManage: error: Code NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) - Class not registered (extended info not available)
VBoxManage: error: Most likely, the VirtualBox COM server is not running or failed to start.
VirtualBox (and vagrant) were both working earlier today, but I updated a bunch of packages via
yaourt -Syua
which I suspect is what caused the problem. Here's (what I think are) the relevant part of
/var/logs/pacman.log
[2013-10-22 15:53] [PACMAN] starting full system upgrade
[2013-10-22 15:55] [PACMAN] upgraded libpng (1.6.5-1 -> 1.6.6-1)
[2013-10-22 15:55] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-10-22 15:55] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Starting build: 3.11.6-1-ARCH
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Starting build: 3.11.6-1-ARCH
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-10-22 15:55] [PACMAN] upgraded linux (3.11.5-1 -> 3.11.6-1)
[2013-10-22 15:56] [ALPM] warning: /boot/syslinux/syslinux.cfg installed as /boot/syslinux/syslinux.cfg.pacnew
[2013-10-22 15:56] [ALPM-SCRIPTLET] Syslinux BIOS update successful
[2013-10-22 15:56] [ALPM-SCRIPTLET] If you used syslinux-install_update to install syslinux:
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> If you want to use syslinux with menu and all modules please rerun
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> # /usr/bin/syslinux-install_update -i -a -m
[2013-10-22 15:56] [ALPM-SCRIPTLET]
[2013-10-22 15:56] [ALPM-SCRIPTLET] If you manually installed syslinux:
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> Please copy or symlink all .c32 modules to your /boot/syslinux directory.
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> If (/ and /boot on seperate fs):
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> # cp /usr/lib/syslinux/bios/*.c32 /boot/syslinux
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> If (/ and /boot on same fs):
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> # ln -s /usr/lib/syslinux/bios/*.c32 /boot/syslinux
[2013-10-22 15:56] [PACMAN] upgraded syslinux (4.07-1 -> 6.02-3)
[2013-10-22 15:56] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2013-10-22 15:56] [PACMAN] upgraded virtualbox-host-modules (4.2.18-7 -> 4.3.0-1)
[2013-10-22 15:56] [PACMAN] upgraded virtualbox (4.2.18-2 -> 4.3.0-1)
After merging in the changes from
/boot/syslinux/syslinux.cfg.pacnew
, I ran
/usr/bin/syslinux-install_update -i -a -m
, and then rebooted the system, and that's when I first discovered VirtualBox was no longer working.
I tried
sudo modprobe vboxdrv
sudo modprobe vboxnetadp
sudo modprobe vboxnetflt
and
sudo modprobe vobxpci
based on what I saw from https://bbs.archlinux.org/viewtopic.php?id=130317
I tried
chown root.root /tmp; chmod ug-s /tmp; chmod 1777 /tmp
based on what I saw from https://www.virtualbox.org/ticket/2335#comment:4
The output of
/bin/ls -ld /tmp
is
drwxrwxrwt 4 root root 80 Oct 22 16:46 /tmp
Not sure what to try next.
Last edited by Nebu (2013-10-22 21:33:35)I also can confirm the same issue as with previous posters, tried all stuff found on the net that seems related to this issue.
Nothing so far as solved it for me, I also had to downgrade to 4.2.18. Not optimal but atleasat i can work until this has been sorted out.
Last edited by loxan (2013-10-24 09:02:19) -
Any workaround to CDG-00071 SYSTEM ERROR: Failed to create Forms API context
Hi all,
Is there a workaround to "CDG-00071 SYSTEM ERROR: Failed to create Forms API context" other than re-installing designer, then forms builder on the same ORACLE HOME directory? To do this will cause considerable downtime to our systems.Hi Diego,
Do you have the correct, corresponding version of
Developer installed? You must install Developer to
be able to generate and run the Forms correctly.
If so, is it in the same <ORACLE_HOME>?
You normally get this error if you don't have Developer
installed in the same ORACLE_HOME as Designer. Please
see the relevant Designer installation guides for full details.
Regards,
Dominic
Designer Product Management
Oracle Corp -
Runtime error: failed to create delegate view
hi all,
We have two applications in two separate projects. But we can deploy only one at a time. If we deploy the second application (or vice-versa)and try to access the first application, it throws up the following error.
P.S. The problem is only with these two applications and they use Adaptive RFC models.
We thought it was because of some Jco conections, but all of them test correctly from the WebDynpro administrator console. Any ideas?
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for view com.eac.vendorportal.DisplayNCRView. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.<init>(DelegatingView.java:41)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.createUninitializedView(ViewManager.java:487)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:524)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:373)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:608)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Caused by: java.lang.ClassNotFoundException: com.eac.vendorportal.wdp.InternalDisplayNCRView
Found in negative cache
Loader Info -
ClassLoader name: [local/ChangeNCR4]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:ejbserialization
sap.com/tcwddispwda
sap.com/tcwdcorecomp
service:webdynpro
service:sld
library:tcddicddicservices
library:com.sap.aii.proxy.framework
library:tcgraphicsigs
library:com.sap.mw.jco
library:com.sap.lcr.api.cimclient
library:sapxmltoolkit
library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm
library:tcddicddicruntime
library:com.sap.aii.util.xml
library:tccolapi
library:com.sap.aii.util.misc
library:tc~cmi
library:tccolruntime
Resources:
F:\usr\sap\PED\JC00\j2ee\cluster\server0\apps\local\ChangeNCR4\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:348)
at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:65)
... 33 moreHallo Vamsee,
you wrote <i>"We use the same package naming conventions in both projects.Is that a problem"!</i> Does this mean that you have two different DCs sap.com/a/b/c/onedc and sap.com/a/b/c/anotherdc which both contain the same Web Dynpro component packages e.g. com.sap.a.b.c.mycomp? If this is true both Deployable DC units will collide on the serverside because the Web Dynpro classloader does not differ between the same Web Dynpro packages in different DCs. The DC namespace is not reflected by the classloader.
Regards, Bertram -
SFTP receiver channel error :Failed to create JCA connection.
Hi All,
Facing below error in SFTP receiver channel.
This is the first run of SFTP adapter on our PI server.
Message could not be forwarded to the JCA adapter. Failed to create JCA connection. Reason: c:\temp\sample_ra_output.5.txt (The system cannot find the path specified)
Exception caught by adapter framework: Adapter call failed. Reason: c:\temp\sample_ra_output.5.txt (The system cannot find the path specified)
SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Adapter call failed. Reason: c:\temp\sample_ra_output.5.txt (The system cannot find the path specified).
Please help.
Thanks & Regards,
Nida FatimaHi Heiko,
Thanks for correcting me.
PFB the screenshot of my channel.
After this change channel is giving different error :
Transmitting the message to endpoint <local> using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Cannot lookup the ra connectionFactory. Reason: Object not found in lookup of com.sap.aii.adapter.sftp.ra.
Pleas guide.
Regards,
Nida -
OI template error - Failed to create template
Hi,
I was under the impression that the Excel snapshot templates could be customized and tried to do this but it didn't work. I restored the master (copied it back to the template folder) but got an error message when I try to (re)set the template paths: Failed to create template (template name here).
I uninstalled OI completely and reinstalled (both server and client) but still get the above message, even when I changed the path where the templates are installed. This is only on the workstations, not on the server so I'm thinking that there is something on the workstation that is stored that doesn't get uninstalled when the add-on is uninstalled.
Even though the templates are installed in the folders indicated in the OI Company Setup, the snapshot templates are not available when in Outlook, no doubt because of this error message; there is something that isn't properly installed that links the templates to Outlook.
Any ideas how I get rid of this message? Don't see why uninstall would not fix this; sounds like a bug with the add-on.
Thank you,
Heather
Edited by: Heather Wilkinson on Mar 16, 2010 12:27 PMHi Heather,
Have you checked this thread yet?
Re: Outlook Integration Add-On Templates Error
Thanks,
Gordon -
Iweb - Publish error - can't create the file "..."
Hey guys,
I've seen this issue in a couple of discussions but nothing helps. When I try to publish my site I'm getting the following error note:
"Publish error. Can't create the file "...png". The disk may be damaged or full, or you may not have sufficient access privileges."
Same result whether I publish to an ftp or to a local folder.
My disk is far from full and the site is merely a few megas heavy.
The content is just text and a few photos.
I have OS version 10.6.8 and Iweb 3.0.4.
No passwords involved.
I've tried all the tricks in the book:
Duplicating the page that won't publish.
Re-creating the page that won't publish.
Deleting com.apple.iweb.plist from home/library/preferences
Moving my site domain to another location, creating a new site and then putting the old one back
Deleting cache from libray/caches/com.apple.iweb
I re-installed Ilife
Reboots
Banging head repeatedly again wall
Any idea what could be causing this and how to fix it?
PleymoTry the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
Plant Connectivity Error failed to create ConnectivityAgentProxy
Dear experts,
I currently installed installed PCo on a XP Machine and after I change the network ID of the PC and the workgroup the agent instance is not able to start properly. I receive the following message:
10.10.2011 22:28:32,.,6,1016,TEST_OPC,Error,Host,failed to create ConnectivityAgentProxy,"The server process could not be started because the configured identity is incorrect. Check the username and password.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at SAP.Manufacturing.Connectivity.IPCoAgentControl.Start()
at SAP.Manufacturing.Connectivity.ConnectivityAgentProxy.Start()
at SAP.Manufacturing.Connectivity.WcfHost.Start()"
10.10.2011 22:28:32,.,8,1016,TEST_OPC,Error,ServiceFaultManager,Manufacturing Fault: REASON = The server process could not be started because the configured identity is incorrect. Check the username and password.
As the other applications like OPC Scout are able to connect to the DCOM (at least this is my understanding) in order to query the OCP Server, it seems to me that there is a Plant Connectivity problem. I tried to find out where the settings ConnectivityAgentProxy are detailed - I thought something like an .ini, .xml file - but unfortunately I did not find anything. Do you have any suggestion, advice?
Thanks in advance,
Florin
Before I start with installing image of the PC with the image before doing the network id name change i would like to ask you if there is any setting, configuration fileDo you have a named user entered for the Agent Instance Service User name/password? If so, you may have to delete and re-enter the name\password to reset this. If you are using DCOM over a workgroup, the same workgroup user name/password must be set up on both the PCo server and the OPC Server PC's.
Hope this helps.
- Steve -
Publishing error Can't create the file "shapeimage_3_link_1.png."
I keep getting this publishing error when i try to publish my sites to .mac:
"Can’t create the file “shapeimage3_link1.png.” The disk may be damaged, full, or you may not have sufficient access privileges."
I don't know what this means or how to fix it. I've been publishing my sites successfully for months now... please help!! Thank you.Here are some notes that may be of help to you:
http://web.mac.com/mark8heaton/iWeb/PublishErrorsHelp/
-Mark
Maybe you are looking for
-
I have just made my first download of a TV show from the iTunes store into my Windows 7 PC. Ping is managing my media. Can I burn this TV show to a DVD so that I can watch it on my TV?
-
Custom messages in OBIEE 11.1.1.5
We have a requirement to display custom messages in analysis when a user clicks on the results tab. The custom messages should be displayed to the user in the following circumstances: - When two dimension columns are selected without fact measures in
-
IPhone doesn't recognize numbers in international format
There's a problem now that arised in Egypt. Before 2 days then numbering scheme was that mobile numbers are 10 digits: 3 digits for network code & 7 digits for number. Now what happened that numbers had just exteneded to be 11 digits: 3 digits for ne
-
Limited to no connectivity on linksys routers only.
I recently moved into a new house and bought a wireless router. In my neighborhood there are two linksys wireless routers (including mine), both named differently, as well as a belkin wireless router. When I try to connect to my router with my wirele
-
Hi I started creating a credit memo request. I filled all the item data. But the processing status is displayed as 'incorrect'. When i leave the tab ' reason for rejection' blank , i get the processing status as 'processed'. I dont understand the rel