Publish error iweb Can't create the file "Mod_footer_bg.jpg."

Hi everyone,
I need some help. I've imported slideshow widgets to my iweb and it's giving me the following PUBLISH ERROR:
"Can’t create the file “Mod_footer_bg.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone help with this? Thanks a million!

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Similar Messages

  • I'm getting a Publish Error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

    I'm getting a publishing error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.
    Does anyone know how to proceed?
    Thanks!

    Try the troubleshooting steps under "FIx iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    Some times all it takes is deleting the .plist to fix this but do the restart and permissions repair if you haven't done this proceedure for a while.

  • I received this message on iWeb: Can't create the file "Mod_footer_bg.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

    I made some changes to my iWeb site, and when I try to publish it, I get the error message: Can’t create the file “Mod_footer_bg.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
    What do I do now?

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.htm

  • I am getting an error when I try to publish that says "Can't create the file "Mod_footer_bg.jpg."  How do I fix this?

    I was previously getting the droppedimage.png error, but I deleted all of my PNG's and I looked up how to fix that one.  The problem is that now I am getting a "Mod_footer_bg.jpg" error when I attempt to publish my site (both the the FTP Server as well as to a local folder).  I checked out the HTML using cyberduck, and I see that the Mod_footer_bg.jpg's are the footers of each of my pages.  I went through all of my pages and made the "footer height" zero.  This did not work, so what do I need to do to fix this?  Thanks!

    I can offer a shotgun effect fix but don't know if any a definite fix for this. Try the following:
    close iWeb.
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
    go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
    reboot.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • TS2167 i'm getting an error message.. can't create the file "header.jpg." The disk may be damaged or full, or you may not have suuficient access priveleges.

    I need to publish to a local folder on my desk top and I am getting this error message.
    can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
    Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

    I receive the following error message when trying to publish site changes to iweb:
    "Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
    Can anyone assist?

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    ... and then republish.

  • Receiving this message"Can't create the file "highlighter_welcome_header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges." I have enough storage how do I find the problem?

    Can’t create the file “highlighter_welcome_header.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
    How do I find the problem? Disk is not full.

    Try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • Iweb - Publish error - can't create the file "..."

    Hey guys,
    I've seen this issue in a couple of discussions but nothing helps. When I try to publish my site I'm getting the following error note:
    "Publish error. Can't create the file "...png". The disk may be damaged or full, or you may not have sufficient access privileges."
    Same result whether I publish to an ftp or to a local folder.
    My disk is far from full and the site is merely a few megas heavy.
    The content is just text and a few photos.
    I have OS version 10.6.8 and Iweb 3.0.4.
    No passwords involved.
    I've tried all the tricks in the book:
    Duplicating the page that won't publish.
    Re-creating the page that won't publish.
    Deleting com.apple.iweb.plist from home/library/preferences
    Moving my site domain to another location, creating a new site and then putting the old one back
    Deleting cache from libray/caches/com.apple.iweb
    I re-installed Ilife
    Reboots
    Banging head repeatedly again wall
    Any idea what could be causing this and how to fix it?
    Pleymo

    Try the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • Publish Error: Can't create the file

    Suddenly, when publishing my site to a folder, I'm getting this Publish Error message:
    Can’t create the file “[name of file]” The disk may be damaged or full, or you may not have sufficient access privileges.
    It's a different file that iWeb can't publish each time I try publishing. I did a search on this topic and saw this post: http://discussions.apple.com/thread.jspa?messageID=10872574&#10872574
    Tried the restarting iWeb solution, but have not yet tried restarting computer. If restarting is the only solution, that's going to be mighty inconvenient. Anyone have any other ideas or know why this is happening?
    This never happened before. Always able to publish just fine.

    Katherine:
    Try the following:
    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
    2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
    3 - reboot.
    4 - launch iWeb and see if you can not publish successfully to a folder.
    If that doesn't help continue:
    5 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
    6 - launch iWeb, create a new test site and save.
    7 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
    8 - move your original domain file from the Desktop to the iWeb folder.
    9 - launch iWeb and try again.
    OT

  • Iweb - when I ask to publish my site ( using ftp) I am suddenly receiving this errorCan't create the file "logo.jpg." The disk may be damaged or full, or you may not have sufficient access privileges. Any ideas please

    Can’t create the file “logo.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.

    How much free space do you have on your hard drive?  What system and iWeb versions do you have?
    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE: In Lion and later the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you're running Mavericks or Yosemite  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

  • Publishing error Can't create the file "shapeimage_3_link_1.png."

    I keep getting this publishing error when i try to publish my sites to .mac:
    "Can’t create the file “shapeimage3_link1.png.” The disk may be damaged, full, or you may not have sufficient access privileges."
    I don't know what this means or how to fix it. I've been publishing my sites successfully for months now... please help!! Thank you.

    Here are some notes that may be of help to you:
    http://web.mac.com/mark8heaton/iWeb/PublishErrorsHelp/
    -Mark

  • Publish error "Can't create the file "......."  The disk may be damaged...

    Here is the full message.
    Can’t create the file “ACRfull logo.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
    I had this the other day too and I was able to get around it by changing two of the pictures; however, I took all of the pictures with my own phone and some of these are logos that are small. How do I fix this error message.
    I appreciate the help!

    Joshua ~ Welcome to the discussions. If simply re-starting iWeb doesn't help, this may:
    "Go to Finder -> HomeFolder -> Library
    Move entire folder "Caches" to desktop
    Restart iWeb and publish
    It may work now
    You can now delete "Caches" folder in desktop."
    More suggestions may be found by doing THIS.

  • Publish Error: Can't create the file "shapeimage_2_link_0.png

    SOS!!
    very urgent and important..I am becoming mad! First of all good night from Italy.. I use Iweb 1.1.2..and after 2 yrs I am working on this site http://web.mac.com/cat_toons/iWeb/feline-care/Welcome.html I need to release for a donation project, when publishing at almost the end I get this pop-up window:
    Publish Error: Can’t create the file “shapeimage2_link0.png.” The disk may be damaged, full, or you may not have sufficient access privileges.
    Now, i cancelled and re-installed I web + all updates, but nothing happened, I am stuck! I do not know which is the file missing or giving error
    Any news? what shall I do?

    well, after a few tries I checked the point were it stoped uploading and I create a new page from scratch copying all images from scratch and it worked.
    Idt does not work if you duplicate a page, you have to create a new one..possibly differentI.E. instead of MOVIE I chose the blog one.
    It worked out
    Baci

  • Publish error : Can't create the file "Typesetter Header3.jpg."

    when i publish my website an error message comes up and says Can’t create the file “Typesetter Header3.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
    anyone have any idea?

    Welcome to the discussions. This thread may help:
    http://discussions.apple.com/thread.jspa?threadID=2296031
    ...If re-starting iWeb doesn’t help, this may:
    Go to Finder -> HomeFolder -> Library
    Move entire folder "Caches" to desktop
    Restart iWeb and publish
    It may work now
    You can now delete "Caches" folder in desktop.

  • What's the fix for this error: Can't create the file "feed.xml."

    I try to publish my site from iWeb but I get an error which is below.
    Publish Error
    Can’t create the file “feed.xml.” The disk may be damaged or full, or you may not have sufficient access privileges.
    Anyone know the fix?

    Whether 'feed.xml' is the first file it is trying to upload, indicating a general failure to connect, or whether it's choked at that particular point would be the question. It would be worth your getting an FTP program if you don't already have one - Cyberduck is free - and checking whether any files at all have been uploaded.
    Is this the first time you've tried to publish or are you updating an existing site? If it's the first you should check carefully that your settings are correct, in particular the 'path' which varies between different hosts and may be blank or may be something like 'public.html' or 'htdocs' - this would lead to the actual webspace which may not be the root level as you access the FTP server.
    You could also try publishing to a local folder - create a special folder somewhere and specify it when setting iWeb to do this, check the contents are OK, then upload the contents of the folder (not the folder itself) using Cyberduck.

Maybe you are looking for

  • Recording audio from another source

    I have several minidiscs with files that I would like to record into Garage Band (in real time). I thought I could accomplish this by simply connecting the MD to my MacBook using an analog mini plug. I've tried to do this, and have come up empty. And

  • Removing extra space in page footer after conditional suppression

    Hi, I have two page footers.  One of them is conditionally suppressed, the other is always present.  When the conditionally suppressed page footer is present, the other footer appears above it.  But when the conditionally suppressed page footer is be

  • I need help report

    hi bw gurus,             our team implementing bw for client,client requirement is to see the report weekly wise llike 1 to 7(1st week),8to14(2 week),15to21(3 wk),22 to 28(4 wk) and remaining days r 2 r 3 days take 5 th wk like this report display by

  • Define the default series of monthly invoice in document numbering first

    Hi , ALL, When AR Monthly Invoice  is started, the message is displayed. " define the default series of monthly invoice in document numbering first - 80061-6 ." I checked the Document Numbering-Setup , Of course, it defines it. And also checked the S

  • JDBC adapter is not polling as scheduled

    Hi, we have observed JDBC adapter is not polling database correctly. adapter is scheduled at every 1 second, but it is plooing for every 5 sec or 6 sec. is there any way the issue can be fixed? Thank You, Madhav