Publish Error: .Mac Publish Configuration Values

Ever since the update to OS X 10.4.7, I have been unable to successfully publish any changes to an existing iWeb site. Whenever I try to publish I get a dialog box with the following:
Publish Error
There was an error determining the .Mac publish configuration values. Please try again in a few minutes.
No matter how many times I attempt to re-try the Publish, I get the same message. I have checked the configuration of my .Mac preferences and everything looks fine (I am able to sync with .Mac without any problems).
Does anyone have any ideas?
Thanks,
- John
20" iMac G5, 2GHz, 2GB RAM Mac OS X (10.4.4) iWeb 1.1.1

OK... here's an update. After successfully getting iWeb to publish using another WiFi network (as opposed to my home satellite internet connection), I decided to see if I could force iWeb to get its act together and complete a publish at home.
I WAS SUCCESSFULL! At least partly....
Here's what I did. Follow these steps at your own risk:
(1) With iWeb closed-down, I went to the location of the Domain file that stores all of the iWeb files and data (found in your Home folder under Library/Application Support/iWeb)
(2) Copied the file as a safety backup
(3) Right-clicked (or <CTRL>-clicked for single-button mouse users) and selected the "Show Package Contents" option
(4) In the resulting window, I highlighted and deleted the following items:
- The "cached_resources" folder
- assets.xxx.plist (where xxx is your .Mac username)
- deletedComments.xxx.plist (same explanation for xxx as above)
- ServerCachedResources.plist
- sharedassets.plist
(5) I then re-launched iWeb and triggered a "Publish All to .Mac" AND IT WORKED!!! Without a hitch!
Once the publish completed, I tried making a small text edit to a single page and then re-publishing.... but then I got the "Can't publish xxx file, try again" error. It appears that, over a satellite internet connection at least, iWeb is unable to overwrite a file that already exists on .Mac successfully without performing all of the above steps.
So... I went back in and repeated the same steps as above. Unfortunately, that resets iWeb into thinking that everything has been successfully published, so in order to get my small text change up, I had to "Publish All to .Mac" again... a bit tedious to have to upload the WHOLE site just to get one small change posted... but better than having to FTP files separately!
So... Apple... if you're listening, it seems that there is definitely an issue with iWeb publishing to .Mac over a high-latency network connection. PLEASE DO SOMETHING!!! I am reading that iWeb 2.0 is already in the works... with lots of enhancements, etc. I sure hope that PUBLISHING is one of them!
Hope this information helps someone else out there. Just be careful... I'm not happy having to mess around in the innerworkings of iWeb's files... and I'm not sure what the long range ramifications could be. Proceed at your own risk!
- John
20" iMac G5, 2GHz, 2GB RAM Mac OS X (10.4.7)

Similar Messages

Publish error - error determining the .Mac publish configuration values

I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
Thanks mucho!
MacBook 2GHz, 2GB Mac OS X (10.4.8) shipboard satellite internet connection

Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

Sync Error :CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB

Very frustrated with BB Link, I keep getting sync error:
CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB
Does anyone know how to fix this?
Thanks
Tom

Although this shows for a different version of Link it is the same error and the only info available:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
If you do not have this version upgrading may help:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

An error occurred while configuring server as a directory server. Please check your network configuration and try again.

Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
    Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
        "Creating Open Directory master"
    ), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
Kim

Had the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0

Firefox sync error server incorrectly configured

The very first time I loaded firefox on my laptop (which i bought only a couple months ago) the syncing worked just fine.
After i dont know how much time i started getting errors that the syncing was failing. I tried to reconfigure the syncing properties but started getting the error server incorrectly configured. I scoured the net looking for answers following all the troubleshooting that I could find.
One thing I notice is that when i choose I have an account it is supposed to load a key that i can use on my already synced devices but that never actually populates and it immediately kicks me to the user name password and sync key screen. This issue remained throughout the duration of all the troubleshooting below. Additionally I cant even create a new sync account on that pc as it fails everytime.
I have done the following in a effort to resolve this issue.
I created a new sync account using one of my other pcs
I added a pc that was never on the sync account to it to verify it does it fact sync
i uninstalled firefox 4 separate times deleting all the folders and even as far as the registry keys
i tried using a lan connection vs wifi
i updated windows
My computer;
I have a lenovo ideapad with windows 7 and 8 gigs of ram with a amd processor
My LOG:
1308530082634 Service.Main INFO Loading Weave 1.7b1pre
1308530082645 Engine.Bookmarks DEBUG Engine initialized
1308530082646 Engine.Forms DEBUG Engine initialized
1308530082646 Engine.History DEBUG Engine initialized
1308530082647 Engine.Passwords DEBUG Engine initialized
1308530082647 Engine.Prefs DEBUG Engine initialized
1308530082647 Engine.Tabs DEBUG Engine initialized
1308530082648 Engine.Tabs DEBUG Resetting tabs last sync time
1308530082648 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
1308530082651 SyncKeyBundle INFO SyncKeyBundle being created for
1308530086186 Net.Resource DEBUG GET cached: 0
1308530086186 Service.JPAKEClient ERROR Error acquiring channel ID. Server responded with HTTP 0
1308530086187 Service.JPAKEClient DEBUG Aborting...
1308530123488 Service.Main INFO Logging in user mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3
1308530123489 Service.Main DEBUG Finding cluster for user mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3
1308530125046 Net.Resource DEBUG GET cached: 0
1308530125047 Net.Resource DEBUG Status 0 in Resource.get: retrying once.
1308530126636 Net.Resource DEBUG GET cached: 0
1308530126636 Service.Main DEBUG cluster value = https://phx-sync061.services.mozilla.com/
1308530126637 Service.Main DEBUG Caching URLs under storage user base: https://phx-sync061.services.mozilla.com/1.0/mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3/
1308530128303 Net.Resource DEBUG GET cached: 0
1308530128303 Net.Resource DEBUG Status 0 in Resource.get: retrying once.
1308530129607 Net.Resource DEBUG GET cached: 0
1308530129642 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1308530132819 Service.Main INFO Service reset.
1308530132820 Engine.Clients DEBUG Resetting clients last sync time
1308530132820 Engine.Bookmarks DEBUG Resetting bookmarks last sync time
1308530132821 Engine.Forms DEBUG Resetting forms last sync time
1308530132822 Engine.History DEBUG Resetting history last sync time
1308530132823 Engine.Passwords DEBUG Resetting passwords last sync time
1308530132825 Engine.Prefs DEBUG Resetting prefs last sync time
1308530132825 Engine.Tabs DEBUG Resetting tabs last sync time
1308530132826 CollectionKeys INFO Clearing CollectionKeys...
the couple of lines that stand out to me are
1308530086186 Net.Resource DEBUG GET cached: 0
1308530086186 Service.JPAKEClient ERROR Error acquiring channel ID. Server responded with HTTP 0
appears it is trying to check some cache or something and cant find it so it just gives up....
please help I have spent countless hours trying to fix this.

One addition note: in my own situation, I checked my about:config and saw my sync server's URL (https://scl2-sync42.services.mozilla.com/ ). I entered it into my address bar and got the following message:
"server issue: database is not healthy"
(quotes were included) I've seen no mention of such a phrase in a Google search, so I assume that no one else has reported any such thing.
Going into my about:config, I deleted the URL and it synced just fine!

Error in JDI Configuration

Hi All,
i am getting an error in JDI configuration in the step importing MSS.sca file in CMS transport studio/development.
error description as follows
Fatal:the compartment sap.com_SAP_MSS_1 contains dirty DCs after the CBS build process:
Info:dirty DC in compartment sap.com_SAP_MSS_1 (dcname=mss/ecm dcvendor=sap.com)
Info:dirty DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec dcvendor=sap.com)
Info:the compartment sap.com_SAP_MSS_1 contains broken DCs after the CBS build process:
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/budget dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/equ dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/ewa dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/finutils dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/lpa dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mas dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mol dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mov dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/pcr dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/per dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/pla dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/qtp dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/qtt dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec/cand dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec/req dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rpt dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/tmv dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=temp/testforisrlpd dcvendor=sap.com)
Fatal:communication error: CBS error: dirty DCs in buildspace after the CBS build process
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2007-02-26 04:52:23.0586 +1:00
please help me.
thanks in advance.
Srinivas.

Hi ...
Maintain one more characterictic like Zprice and in Addl data give table as SDCOM and field as VKOND and no values, this is characteristics for variant price and include it in the class which u have created earlier.
goto CT04 and goto values .... there select one value eg RED and then goto object dependency and give code as
$self.Zprice = 'A1'
and for all values give it like that..
Now goto VK11 and give VA00 .....
then enter varaitn as A1 and give price
give A2 and give price
like all variants 'A1' etc etc etc which u maintained in object dependency ....
now u can create profile in Cu41 and then run sales order
so what ever u select ...red, blue green etc in order for eg color characterictics .. u have maintained for each value in characteristics .. object dependency .... as $self.Zprice = 'A1', so A1 price maintained in VK11 so if u select Red ... then price from A1 comes ..
same procedure u follow for all values in other characterictics .. with only one characteristics Zprice ... i.e $self.Zprice = 'B1' etc .. and maintain values for B1 etc in Vk11 in Va00.
Reward if useful
Krishna

Error in varient configuration

im getting error in varient configuration.
my main item is cd1
varient color is red, blue, black
im maintaing pr00 for cd1, and va00 for red,blue,black.
whille im creating the sales order ,im getting main material price im not getting varient price
plz give me teh suggestions

Hi ...
Maintain one more characterictic like Zprice and in Addl data give table as SDCOM and field as VKOND and no values, this is characteristics for variant price and include it in the class which u have created earlier.
goto CT04 and goto values .... there select one value eg RED and then goto object dependency and give code as
$self.Zprice = 'A1'
and for all values give it like that..
Now goto VK11 and give VA00 .....
then enter varaitn as A1 and give price
give A2 and give price
like all variants 'A1' etc etc etc which u maintained in object dependency ....
now u can create profile in Cu41 and then run sales order
so what ever u select ...red, blue green etc in order for eg color characterictics .. u have maintained for each value in characteristics .. object dependency .... as $self.Zprice = 'A1', so A1 price maintained in VK11 so if u select Red ... then price from A1 comes ..
same procedure u follow for all values in other characterictics .. with only one characteristics Zprice ... i.e $self.Zprice = 'B1' etc .. and maintain values for B1 etc in Vk11 in Va00.
Reward if useful
Krishna

ERROR INSTALLING OC4J CONFIGURATION FILES

Hi,
Steps:
1. Downloaded Oracle11g Rel2 from download.oracle
2.Installed Software only option and completed installation on my laptop Windows7 ultimate. Selected Enterprise Version, unchecked OLAP,DATA MINING.
Error message during installation, some files missing .jar files. I have opted to ignore and continue and finally got success installation message.
3.Configured DB using DBCA.
4.Able to connect as SYS, SYSTEM.
Problem.
I tried to reconfigure DB using DBCA for OEM, received the msg
ERROR INSTALLING OC4J CONFIGURATION FILES. The summary error log is here. Appreciate any help.
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMConfig perform
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
thanks
Ram

Hi,
Seems you have not extracted downloaded zip files into same directory. In that case you get error like
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup12.jar (A file or directory in the path name does not exist.)
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup5.jar (A file or directory in the path name does not exist.)
Also after installation dbca will throw error.
Try the below
For AIX platform:
unzip in the same folder
$ mkdir 1120
$ mv aix.ppc64_11g_database_1of2.zip 1120
$ mv aix.ppc64_11g_database_2of2.zip 1120
$ cd 1120
$ unzip aix.ppc64_11g_database_1of2.zip
$ unzip aix.ppc64_11g_database_2of2.zip
$ cd database
$ ./runInstaller
This is true for all platforms on which you get two .zip files to download
For Windows 64 bit example on 11.2.0.1 you can do the following :
- create a directory C:\tmp\1120
- copy winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zip under C:\tmp\1120
- unzip winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zipunder C:\tmp\1120
Thanks,
Krishna

Error Msg. "Configuration Error AGP Graphics Card"

I recently purchased a MacBook Pro 17". I migrated my software from my old computer, but when I tried to open Final Cut Express HD, I got an error message saying Configuration Error "AGP Graphics Card." I reinstalled my original disk but got the same error message. When I went to the support site, it indicated for that error message that I needed to download an update. I did that, but the install indicated that I was already updated and current. What can I do?

Try hitting the esc key whenever you get the message.
You are probably using FCE 3.0 which was not designed to run on Intel Macs.

JET install: ERROR: Unable to configure network interface Exiting to shell

Using SUNWjet v4.4.4 I'm trying to build a server using update 5 x86 which seems
to work with one notable exception. The JET server and the build server do not
reside on the same subnet. In order to get around not being able use PXE boot
to boot the build server I'm booting from DVD after making the following modifications
to the grub menu entry:
kernel /I86PC.Solaris_10-1/multiboot kernel/unix - install nowin -B
install_config=x.x.x.x:/opt/SUNWjet,
sysid_config=x.x.x.x:/opt/SUNWjet/Clients/testclient,
install_media=x.x.x.x:/export/install/media/s10u5-x86,
install_boot=x.x.x.x:/export/install/media/s10u5-x86/boot
This seems to kick off the installer however it fails to bring up the network interface:
SunOS release
Configuring devices
Solaris Interactive Text ( Console Session )
ERROR: Unable to configure network interface Exiting to shell
# ifconfig bge0 x.x.x.x up netmask 255.255.255.0
# route add default x.x.x.1
# exit
Using RPC
Installation continues without any errors
It seems that I'm forced to bring up the interface manually each time.
This is what the template looks like:
base_config_ClientArch=i86pc
base_config_ClientEther=XX:XX:XX:XX:XX:XX
base_config_ClientOS=s10u5-x86
base_config_client_allocation="grub"
base_config_products="custom eiscd sds"
base_config_sysidcfg_nameservice=NONE
base_config_sysidcfg_network_interface=PRIMARY
base_config_sysidcfg_ip_address=x.x.x.x
base_config_sysidcfg_netmask=255.255.255.0
base_config_sysidcfg_root_password="XXXXXXXXXXXX"
base_config_sysidcfg_system_locale="en_CA.UTF-8"
base_config_sysidcfg_timeserver=
base_config_sysidcfg_timezone="Canada/Eastern"
base_config_sysidcfg_terminal=vt100
base_config_sysidcfg_security_policy=NONE
base_config_sysidcfg_protocol_ipv6=no
base_config_sysidcfg_default_route=x.x.x.1
I've also tried setting the following:
base_config_sysidcfg_network_interface=PRIMARY
vs
base_config_sysidcfg_network_interface=bge0
I don't mind doing this manually but of course I would much rather have it work automatically.

Try giving more network interface settings in the sysidcfg settings:
network_interface=value {primary hostname=host_name
                          default_route=ip_address or NONE
                          ip_address=ip_address
                          netmask=netmask
                          protocol_ipv6=yes_or_no}
See http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh2r?a=view

Cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB

I'm getting this message when trying to sync my BB calendar with Outlook 2010 ver 14.0.7153.500 SP2 MSO cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB Is there a fix for this? I'm a new owner of the BB Classic 10 Thank you.

Although this shows for a different version of Link it is the same error and the only info available:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
If you do not have this version upgrading may help:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

Error that "specify a value for variable posting period (single value entry

hi
My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
However the same query appears to be working fine under different username.
plz advise.

Hi Abhinav,
Just do one thing compare the Roles of two different users for which Query is getting executed and not.
Check the Object S_RFC.
Compare the Objects detail for Both the Users.
Please Assign points if useful.
Regards,
Rajdeep.

Error while deploying configurable sku

Error while deploying configurable sku in BCC server when i give ready for review and all it gives and INFO msg as
Can't find display name resource and price in bundle and finally when i give accept for deployment the following error displayed .Please help me to resolve it thanks in advance waiting for your reply soon.
12:38:11,828 ERROR [DynamoServlet]
java.lang.NullPointerException
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:382)
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:441)
at atg.bizui.taglib.GetProcessURLTag.doStartTag(GetProcessURLTag.java:1
6)
at atg.bizui.taglib.elwrap.GetProcessURLTagWrapper.doStartTag(Unknown S
urce)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspx_meth_b
z_005fgetProcessURL_005f0(getTasks_jsp.java:1615)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspService(
etTasks_jsp.java:359)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.servlet.ServletUtil.invokeInclude(ServletUtil.java:3552)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:757)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
dspel005finclude_005f0(getProjects_jsp.java:1192)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fif_005f5(getProjects_jsp.java:1119)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fforEach_005f0(getProjects_jsp.java:1077)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fwhen_005f1(getProjects_jsp.java:1036)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fchoose_005f1(getProjects_jsp.java:1000)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspServi
e(getProjects_jsp.java:244)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:780)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspx_meth_dspe
_005finclude_005f0(index_jsp.java:2712)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspService(ind
x_jsp.java:381)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)

Error while deploying configurable sku in BCC server when i give ready for review and all it gives and INFO msg as
Can't find display name resource and price in bundle and finally when i give accept for deployment the following error displayed .Please help me to resolve it thanks in advance waiting for your reply soon.
12:38:11,828 ERROR [DynamoServlet]
java.lang.NullPointerException
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:382)
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:441)
at atg.bizui.taglib.GetProcessURLTag.doStartTag(GetProcessURLTag.java:1
6)
at atg.bizui.taglib.elwrap.GetProcessURLTagWrapper.doStartTag(Unknown S
urce)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspx_meth_b
z_005fgetProcessURL_005f0(getTasks_jsp.java:1615)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspService(
etTasks_jsp.java:359)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.servlet.ServletUtil.invokeInclude(ServletUtil.java:3552)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:757)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
dspel005finclude_005f0(getProjects_jsp.java:1192)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fif_005f5(getProjects_jsp.java:1119)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fforEach_005f0(getProjects_jsp.java:1077)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fwhen_005f1(getProjects_jsp.java:1036)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fchoose_005f1(getProjects_jsp.java:1000)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspServi
e(getProjects_jsp.java:244)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:780)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspx_meth_dspe
_005finclude_005f0(index_jsp.java:2712)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspService(ind
x_jsp.java:381)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
          int l_year;
          int l_month;
          int l_days;
          l_year = target_Date.getYear();
          l_month = target_Date.getMonth();
          l_days = target_Date.getDate();
     Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Publish Error: .Mac Publish Configuration Values

Similar Messages

Maybe you are looking for