"Publish Error: Publish failed due to network error. Check your internet co

I am using the very latest version of iWeb. I have had it for a week.
First let me tell you the message that I got and then what I was doing prior to getting the message:
It said: "Publish Error. Publish failed due to a network error. Check your internet connections and try again."
I did check my internet connections and I called mt cable modem ISP. He put me through some tests and ascertained that the problem was not with the cable connection. I can connect to the web (of course) and I can send and receive email. The fellow at the ISP (Road Runner) told me that the uploading goes just fine but that the confirmation end of it is bad.
I have made 9 pages for my website. I clicked the button to publish the 10th page and got the message at the top of this post.
Then I called Apple Care and took advantage of the 90-day help warranty. The gal there had me try to publish to my private folder. That worked! I was able to publish to the folder and that message at the top of this post did not appear. It said that the page was published and did I want to visit it.
I ended up deleting the page about my friend Lerma, since everything was going fine until I did that page. AS I recall, there was a mixup with the pages and I thought I had fixed it.
Then I worked a little more on my husband's Memorial Site and tried to publish and got the same bad message as above, meaning that it wasn't just the page about Lerma but any page I might be doing since doing her page.
NOW THIS IS THE ODD PART:
I went to the website on Safari browser with the intention of checking out the other earlier pages, only to discover (happily) that my husband's memorial page (the beginning of it) WAS THERE even though I got that message saying that there had been a network error. Lerma's page, however, was NOT there.
I am between happy knowing that a page can show up on the website even though I get a message saying that it did not, but anxious knowing that if I am getting Publish Error messages, something is screwy with the program.
I will continue to try to publish to the Internet, but meanwhile I welcome any observations and happy accounts of how they got the same message but everything ended up fine after a while.
Meanwhile I am going to be working on my pages even though right now I am getting those messages saying that they could not publish due to network error.
I need a break.
— Lorna in Southern California

Hi Lorna!
Sorry to hear that you're getting the dreaded
"Publish Error" message from iWeb. Lots of people
have reported getting this type of error...and I
don't think it ever really has much to do with the
network...at least nothing that can be fixed. The
fact that you have been publishing just fine up until
now is a good thing. Some people have NEVER been
able to publish to the web. Hopefully this problem
will clear itself up. Maybe it's just sunspots or
something. Probably someone thinks you need a break,
too.
Is this the kind of thing that would warrant me going back to the Apple Store to get an exchange???
— Lorna in Southern California

Similar Messages

Get Publish failed due to network error on Publish

Everytime I make a change to my web site within iWeb then do a Publish I get a message "Publish failed due to network error. Check your internet connection and try again".
Although I get the above message my changes do get made on my web site.
I am on high speed internet. I have received this message every time I do a Publish after making changes for the last several days.
http://web.mac.com/johnnelsonhomes is web site address. Again, changes are getting posted most times, although not always.
Any ideas?
Thanks in advance.

I have been having the same problem. I can access my iDisk, but cannot publish to it. When I try i get a 'cannot publish due to network error' message. I can successfully upload the same website to my 'GoDaddy' hosting acct. This is what I have done so far without success:
Turned off all commenting and searches and .mac specific services.
Tried connecting directly to my DSL modem to try to eliminate any problem that may be introduced by my router or firewall settings.
Reformatted my hard drive and re-installed OSX (clean). Patched the new system with all available updates. I did not restore from my back-ups to ensure that any corrupted settings would not be brought forward to the new install. I then created a simple one page site with iweb and attempted to publish to .mac. Even this failed. I am not sure what I could be missing. I had been publishing for months without any problem. Then I started getting this problem occasionally, and now I get it all the time. The only thing I can think of is if there is possibly a network latency problem causing the connection to time out.

Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?

I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?

I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890

While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

Check to see if you anti-virus software running, that will at times interfere with the connection with the Apple server.

How do i reinstall pages, after it failed to install due to network error ?

I purchased page's from the app store, all seemed well, then i get a message on my screen telling me failure due to network error
i then tried to go back to the app store to try a re install and the crummy thing is telling me it is installed
i have tried to get a solution by contacting Apple support, and that is useless , have searched to find a resolution but
i haven't found a sound thread to my problem ...
please some advise if you can
Thank you Aid

Why not try the App Store forum, Pages, and MacBook Pro.
Mac App Store
MacBook Pro
Pages
Apple - Support - Site Map

"JCA Binding execute of Reference operation 'Write' failed due to: Translation Error.

Hi, i am trying to read a comma delimited file using an inbound file adapter, i have used a mediator to route records to the outbound file adapter.My input.txt file contains 10 records as Fname,Lname.I have used native format builder to generate xsd. To achieve transformation,in the mediator i have mapped only the Fname from source to traget using a for-each loop.I am trying to publish records in the batches of 2 so i have configured inbound file adapter accordingly.My inbound file adapter reads the first two records and the same is visible at the em console mediator instance(payload), i am even able to see the first two records being transformed in the transformed payload in the mediator instance detail but at the outbound file adapter i get an error saying :
Error during invoking 1-way operation "Write" on target service "writeFile"
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
When i map both the Fname and Lname in the xsl map file i get the output.But i only need one field at the outfile i:e either the Fname or the Lname.
Given below are the details of the interface:
My Interface Flow: InboundFileAdapter--------ReadsFile------->Medaitor------Transformation----->OutboundFileAdapter-----writesFile
Input Payload(comma delimited text file) as,
Brad,Pitt
Keanu,Reaves
Martin,Lawrance
Johnny,Depp
etc
etc
Schema definition for payload:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
 xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
 xmlns:tns="http://TargetNamespace.com/readFile"
 targetNamespace="http://TargetNamespace.com/readFile"
 elementFormDefault="qualified"
 attributeFormDefault="unqualified"
 nxsd:version="NXSD"
 nxsd:stream="chars"
 nxsd:encoding="US-ASCII">
<xsd:element name="Root-Element">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="Employee" minOccurs="1" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="Fname" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
 <xsd:element name="Lname" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
</xsd:element>
</xsd:schema>
XSL Map:
<xsl:template match="/">
 <imp1:Root-Element>
 <xsl:for-each select="/imp1:Root-Element/imp1:Employee">
 <imp1:Employee>
 <imp1:Lname>
 <xsl:value-of select="imp1:Lname"/>
 </imp1:Lname>
 </imp1:Employee>
 </xsl:for-each>
 </imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Please help me with the above mentioned error and if above transformation is possible using a mediator instead of BPEL
Regards,
Saif

Hi Saif, Are you using the same xsd for the outbound (write) file adapter as well? In that case, you may need to map both the names (Fname and Lname) but leave the name which you do not want to be written to the file as an empty text. For example, if you would need to map only the Lname, but not the Fname, the xsl will be like,
<xsl:template match="/">
 <imp1:Root-Element>
 <xsl:for-each select="/imp1:Root-Element/imp1:Employee">
 <imp1:Employee>
 <imp1:Fname>
 <xsl:text disable-output-escaping="no"></xsl:text>
 </imp1:Fname>
 <imp1:Lname>
 <xsl:value-of select="imp1:Lname"/>
 </imp1:Lname>
 </imp1:Employee>
 </xsl:for-each>
 </imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Another option is to have a separate xsd with only one element (Fname or Lname) for the outbound file adapter, in which case you would need to map only one field.

Artifact harvest failed due to: Unexpected error import: Invalid jar file

Hi,
i am trying to submit the .biz and .proxy file to OER using Eclipse,
but i am getting the following error,
can anybody help me on it,
what i am missing ?
8332 [Main Thread] INFO com.bea.alsb.harvester.plugin.reader.OSBReader - OSB Config Jar Import / Validation starting.
<Mar 13, 2012 10:28:16 AM IST> <Warning> <ConfigFwk> <BEA-000000> <Setting transaction '6' as rollback only. Rollback reason:
java.io.IOException: Invalid jar file
at com.bea.wli.config.importexport.ConfigJar$LogicalJarForm.<init>(ConfigJar.java:1341)
at com.bea.wli.config.task.impl.UploadJarTask._execute(UploadJarTask.java:46)
at com.bea.wli.config.task.impl.SessionedTask$1.execute(SessionedTask.java:233)
at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
at com.bea.wli.config.transaction.TransactionalTask._doExecuteWithRetry(TransactionalTask.java:162)
at com.bea.wli.config.transaction.TransactionalTask.doExecute(TransactionalTask.java:142)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:236)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:191)
at com.bea.wli.config.task.impl.UploadJarTask.uploadJar(UploadJarTask.java:36)
at com.bea.wli.config.mbeans.Config.uploadJarFile(Config.java:442)
at com.bea.alsb.harvester.utils.ConfigJarUtils.importConfigJar(ConfigJarUtils.java:79)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQuery(OSBReader.java:196)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQueries(OSBReader.java:112)
at com.bea.alsb.harvester.plugin.reader.OSBReader.read(OSBReader.java:87)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.flashline.util.classloader.ContextClassLoaderHandler.invoke(ContextClassLoaderHandler.java:39)
at $Proxy0.read(Unknown Source)
at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:630)
at com.oracle.oer.sync.framework.Introspector.<init>(Introspector.java:204)
at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:430)
8426 [Main Thread] ERROR com.oracle.oer.sync.framework.MetadataManager - Artifact harvest failed due to: Unexpected error import: Invalid jar file
com.oracle.oer.sync.framework.MetadataIntrospectionException: Unexpected error import: Invalid jar file
at com.bea.alsb.harvester.utils.ConfigJarUtils.importConfigJar(ConfigJarUtils.java:97)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQuery(OSBReader.java:194)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQueries(OSBReader.java:112)
at com.bea.alsb.harvester.plugin.reader.OSBReader.read(OSBReader.java:87)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.flashline.util.classloader.ContextClassLoaderHandler.invoke(ContextClassLoaderHandler.java:39)
at $Proxy0.read(Unknown Source)
at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:630)
at com.oracle.oer.sync.framework.Introspector.<init>(Introspector.java:204)
at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:430)
Caused by: java.io.IOException: Invalid jar file
at com.bea.wli.config.importexport.ConfigJar$LogicalJarForm.<init>(ConfigJar.java:1341)
at com.bea.wli.config.task.impl.UploadJarTask._execute(UploadJarTask.java:46)
at com.bea.wli.config.task.impl.SessionedTask$1.execute(SessionedTask.java:233)
at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
at com.bea.wli.config.transaction.TransactionalTask._doExecuteWithRetry(TransactionalTask.java:162)
at com.bea.wli.config.transaction.TransactionalTask.doExecute(TransactionalTask.java:142)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:236)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:191)
at com.bea.wli.config.task.impl.UploadJarTask.uploadJar(UploadJarTask.java:36)
at com.bea.wli.config.mbeans.Config.uploadJarFile(Config.java:442)
at com.bea.alsb.harvester.utils.ConfigJarUtils.importConfigJar(ConfigJarUtils.java:79)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQuery(OSBReader.java:196)
... 11 more
Please help...
Regards,
yogesh

Hi Yogesh - when you say "i don't think the file is corrupt, because it works fine in eclipse", do you mean, you are actually able to publish them to a server and test those out?
Dont know your exact scenario, but when you say that you took the sbconfig from another machine and used it on your local system, cant we just go ahead with that? I mean, clean up your code base, and then import this latest "working" sbconfig and start afresh?
-Swagat

Error: NDMP operation failed due to media error

I scheduled a RMAN backup job on oracle 11g EM and sometime it failed when running datafile backup. The log showed the error come from media layer and did not specify detail message. We used secure backup to transfer data to tape. There are 4 tape drivers in service, but only one of them always return this error. Could anyone tell how to resolve the problem ?
RMAN-03009: failure of backup command on c1 channel at 01/23/2014 11:17:29
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
 sbtclose2: Internal error - NDMP Data Service has exited prematurely.
 For more information, please check the transcript for this job ('oracle/33779.1').
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 1292
ORA-19511: Error received from media manager layer, error text:
continuing other job steps, job failed will not be re-run
And I found below logs in the secure backup scripts log. it that mean a network error?
10:16:42 await_ndmp_event: sending progress update
 10:16:42 SPU: sending progress update
 10:17:43 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10452672, nfiles 0
10:17:43 await_ndmp_event: sending progress update
 10:17:43 SPU: sending progress update
 10:19:35 NWEM: saw tape write error log message ("tape write failed due to media error")
tape write failed due to media error
 10:19:35 MNPO: mover halted with reason=media error
 10:19:35 MGS: ms.record_size 65536, ms.record_num 0x28094, ms.bytes_moved 0x280940000
 10:19:35 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10497280, nfiles 0
 10:19:35 MNPO: data service halted with reason=connection error
 10:19:35 SNPD: Data Service reported bytes processed 0x280B40000
 10:19:53 A_T: suppressing filemark output due to NDMP having written one
 10:19:53 A_T: writing marker label; here it is:

Judging by the transcript snips that you provided, I also believe that this is caused by a bad drive or bad media.
Start by looking at the output of the command :
# obtool dumpdev <tape_drive_name>
(replace "<tape_drive_name>" by the name of the drive which was used during the failed job).
Look for any errors or warnings during the date/time the backup job failed. These message usually provide a good idea about the problem that occurred.
Next try the same backup using the same media in another drive to see it the problem reoccurs or not. In case the problem reoccurs, there's a good chance that the media is bad. If the backup succeeds on another drive, then try the same backup using the original drive but with a new media. If the backup fails again on the same drive using new media, you should open a support request with the tape drive vendor. In that case, collect the logs from the tape library (and dump the tape drives is possible).
HTH,
Gio

Backup to remote stage failed due to RFC error

Hello!
Recently I have problem to execute a successful online Backup to the external source.
If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
The responsible BGD-WP:
status: On hold , reason: RFC, report: SAPLSSXP
The dev_w8 trace retrieves the following error:
Source RSCROSS10 Line 112.
Error Code DBIF_RSQL_SQL_ERROR.
Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
Function HandleRsqlErrors Line 761.
The DB13-protocol retrieves the following information:
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
Connected to 192.168.200.3 Port 21.
220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to: administrator 230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage: * 230-* ie, site codepage [client codepage] * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
Can some one help me with this issue?
Thank you very much!
regards
Thom

Hello Eric,
unfortunately it is not possible to do it, because I have only remote access to the SAP system.
Is it possible to analyse the problem with the log files?
If yes --> which logs should I post here?
I went through the monitors in RZ20 and found a lot of errors/warning:
Database:
DBIF_SETG_SQL_ERROR
ORA-03106: fatal two-task communication protocol error
DB error 24909 in FET
SQL error 3106: WP in reconnect status
Background:
Job SAP_COLLECT_FOR_PERMONITOR terminated
Utilisation:
100% > 95% Background work process load exceeds threshold
BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
Abap ErrorInUpdate
Syslog : BasisSystem
Operating system call recv failed (error no. & >E5)
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
My WP settings are:
rdsip/wp_no_dia = 6
rdsip/wp_no_btc = 3
rdsip/wp_no_vb = 1
rdsip/wp_no_vb2 = 1
rdsip/wp_no_spo = 1
Thank you!
Thom

OMF export failed due to internal error

I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

Import of a request failing : ERROR: connect failed due to DbSL load lib fa

Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
 Transport control program tp ended with error code 0249
 Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
 Message no. XT200
Diagnosis
 An error occurred when executing a tp command.
 Command: IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
 Return code: 0249
 Error text: connect failed due to DbSL load lib failure
 Request: E08K901525
System Response
 The function terminates.
Procedure
 Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAY

Hi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit.

Error in Tomcat --- context start up failed due to previous errors

Feb 27, 2008 11:05:11 AM org.apache.catalina.core.StandardContext start
SEVERE: Context [/jstl] startup failed due to previous errors
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ComponentRule end
WARNING: [ComponentRule]{faces-config/component} Merge(com.mycompany.TabLabel)
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ComponentRule end
WARNING: [ComponentRule]{faces-config/component} Merge(com.mycompany.Tree)
Feb 27, 2008 11:05:13 AM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(com.mycompany.jsf.validat
or.LATER_THAN)
Feb 27, 2008 11:05:14 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Feb 27, 2008 11:05:14 AM org.apache.catalina.core.StandardContext startHello frnds i dont understand what should i do? anybody familiar with this kind of error. please let me know in this case what should i do?
even if i am trying to copy whole files in another folder it shows same msg for that folder too. please help me
Thankyou everybody

Hi ,
I also face this same kind of problem.
I tried to fix the problem but not work out.
I got another solution. I am not sure its a current solution .
Try it carefully.
Finally 1, I take back up -copy of server.xml and common/lib .
2, Un-install Tomcat server.
3, After i have installed fresh tomcat server.
4, Replace back-up copy of server.xml and common/lib.
its working fine

Whole online backup from DB13 failed due to processing error

Hello!
I have difficulty by execution of Whole database online backup from DB13 via FTP on the remote target. The backup goes very slow and breaks after a while.
The BRBACKUP action log looks as follows:
backup_mode ALL
backup_type online
backup_dev_type stage
stage_root_dir /sap/DEVB
compress no
stage_copy_cmd ftp
remote_host 192.168.200.3
remote_user sapbackup
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA10 #1/6
BR0280I BRBACKUP time stamp: 2007-10-23 01.44.35
BR0063I 6 of 41 files processed - 12000.047 MB of 93092.766 MB done
BR0204I Percentage done: 12.89%, estimated end time: 23:06
BR0001I ******____________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA6 ...
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA6 #1/7
BR0280I BRBACKUP time stamp: 2007-10-23 02.38.05
BR0063I 7 of 41 files processed - 14000.055 MB of 93092.766 MB done
BR0204I Percentage done: 15.04%, estimated end time: 21:36
BR0001I ********__________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA7 ...
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7':
Connected to 192.168.200.3 Port 21.
220-FTP server ready.
220 This is a private system - No anonymous login
331 User sapbackup OK. Password required
230-User sapbackup has group access to: administrator
230-This server supports FXP transfers
230-OK. Current restricted directory is /
230-************************************************
230-* Use SITE command to change client codepage: *
230-* ie, site codepage [client codepage] *
230 ************************************************
200 TYPE is now 8-bit binary
200 PORT command successful
150 Connecting to port 4977
NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.37
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 to/from /sap/DEVB/bdwkuudu/SR3.DATA7 failed due to previous errors 
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bdwkuudu.ans 2007-10-23 03.08.37
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0054I BRBACUP terminated with errors
Any helpful information will be appreciated.
regards!
Thom

this post is duplicated at Re: Backup to remote stage failed due to RFC error
please only post your question once and only in 1 forum.
thanks.

'OMF export failed due to internal error' message

Hi,
Has anyone ever got an 'OMF export failed due to internal error' message when trying to export in OMF format?
I get that every time I try to export in that format.
How can I make it work?
Thanks and best,

Hello sj holcombe,
And welcome to Apple Discussions!
Have you had a chance to check out this Apple support document directly related to this issue? If not, it is a good place to start.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
Hope it helps.
B-rock

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

"Publish Error: Publish failed due to network error. Check your internet co

Similar Messages

Maybe you are looking for