Publish error when trying to upload pages

I am struggling with Iweb. 4 pages went OK then the Error Message. Updated to 1-1-1 and the next page flew! Now, nowt lad! stuck again. Come on Apple! After 6 years of praising Mac. What a load of tripe this Iweb is!
Imac G5 1-8 1g ram Mac OS X (10.4.7)

Take a look at some of these tips from Apple. There might be something here that can help your situation.
http://web.mac.com/mark8heaton/iWeb/PublishErrorsHelp

Similar Messages

Error when trying to see pages in webcenter app with adf security activated

Greetings
I have this problem
I developed a WebCenter Application that uses ADF Security with form authentication. This App has
two JSPX the first one is the login page and the second one is the page where i manage runtime created pages
using the CREATE PAGE task flow and a page tree iterator to see my created pages.
when i deploy de application on the weblogic server i am able to login successfully and create as many pages as
i want and also see them using the link generated. the problem is that when a delete the application from the weblogic
server, i mean the deployed application, then redeploy the same application on the server i can login again and
see the pages i created before but when i try to reach them i get this error showed in my internet browser:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46)
containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization
header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that
authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response,
and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was
given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained
in section 11.
Does anybody now what kind of configuration i am missing or what is happening?
thanks for your help

this issue has a solution showed on the this thread Re: ERROR when trying to see pages created with create page task flow

Device uses too much power error when trying to upload pictures

I am now getting the device uses too much power error when trying to upload pictures from my Nikon Coolpix. It had worked fine using the Apple camera kit, but just started giving this error. What changed?

1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad

Error when trying to edit page

I get the following error when trying to edit an asp page
"The operation could not be performed because a problem
occurred while attempting to connect to the server. Please check
your internet connection and try again. For more details, please
visit the Incontext Editing Support Center."
If I try and duplicate the page I get:
"The page you are trying to edit or duplicate was loaded with
and error from the server.
Solution: Contact your web developer to correct the problem.
For more details, please visit the Incontext Editing Support
Center."

There is a test page here:
http://www.markthomasinfo.com/testice.asp.
I can't edit this file and get the errors I put in my first post in
this thread when I try and do so. I get the same errors with any
ASP file I try and edit.
I can however edit this simple html file successfully:
http://www.markthomasinfo.com/testincontext.html
The ASP page is very simple, here's the code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:ice="
http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
<title>Untitled Document</title>
<script src="includes/ice/ice.js"
type="text/javascript"></script>
</head>
<body>
<p>TEST ASP FILE</p>
<div ice:editable="*">Content for new Editable Region
goes here</div>
</body>
</html>

For uploading PDF (in php) if (!=application/pdf) {"No PDF"} gives error when trying to upload PDF. Why?

In a php upload file I have inserted:
if($_FILES['file']['type'] !="application/pdf"){ echo "Should be PDF";}
exit;
Even when trying to upload a PDF file the error message comes: Should be PDF.
Earlier this worked fine. Maybe a bug in an update?
Regards,
pluys

I think I found part of a solution now. It is not Firefox, it is some add-on or plug-in. I myself use a lot of add-ons. I asked someone who was new to Firefox to load up a PDF file. There was no problem!
So now I'm going to check all my add-ons, hoping it is not Firebug.
All the best,
Pluys

Error when trying to upload .mxp file

This is the error I'm getting when trying to upload an .mxp
for a Fireworks extension, using Firefox:
(I can't even get to the login screen for the Exchange using
Explorer, go figure)
Anyone know what the "not enough space" error means?

not sure why this posted twice.

Conflict error when trying to upload to the cloud from my Note tablet

Three days ago I started getting an error when trying to sync new files to the cloud. They will try over and over until I turn sync access off, in fact. I also have Photoshop CC6 and was just added to the early access for the desktop access and that is when this problem started. I really need to be able to save my psdx files in some way and at the moment the cloud is the only way from the touch app. Any way to fix this? I am on a Samsung Galaxy Note 10.1 and Android Jellybean 4.1.2.

Make sure you're signed into Creative Cloud properly via the Settings icon in the upper right of the project selection workspace > My Account. (Looks like a cogwheel.) From some reason, that option goes kablooey from time to time.

Getting an error of limit of 500 photos for published album when trying to upload to Flickr

I'm trying to upload to my Flickr Pro account and I am now getting an error message saying:
"You may put a maxiumum of 500 photos in this published album. Only the first 500 photos will be added to this published album. If you want to publish more photos, publish another album."
This happens only when I'm trying to upload to a specific set which has 111 photos on Flickr. If I try to send to another set, it works. I can work around this, but I'd like to figure out what's going on.
What does this actually mean, and how am I able to continue to publish to the correct Flickr set?
Thanks.

Thank you for getting back to me so quickly. The RSS feed is http://www.lifeinnortheastohio.com/the-panel-scanners/rss.xml

BSP error when trying to upload employee photo

,<h1>.Dear Experts,<</h1>
<h2>I am trying to upload employee photo on my SAP system DB.
     I am following note 595563 and performing below mentioned activities.</h2>
       <h3> * Make sure that the HTTP plugin is active.</h3>
    <h4> Transaction SMICM, "Display Services" function key (shift F1). The list of services must contain a port other than 0 for HTTP. If not, you must adjust the relevant profile parameter.
     Typical entry:
      icm/server_port_0         PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
      Transaction SICF, select: default_host - sap - bc - contentserver. Select the function to display/change the service. Check that a user is defined.
      If a user is not defined, use Transaction SU01 to create a new user. Use the "System" user type. Assign the profiles SAP_ALL and SAP_NEW to the user.
      Using the relevant data from the user that has just been created, maintain the anonymous logon data for the service /default_host/sap/bc/ and then save the changes.
Check the system PSE.
      Start Transaction STRUST. Expand the system PSE. The system PSE must be green for each application server.
Determine a suitable exchange directory.
      The archive system must be accessible from every application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application servers (for example,
server\share) is sufficient. You can generally use the global directory (profile parameter DIR_GLOBAL). You can use report RSPARAM to determine the profile parameters.
Setting up the storage
Create a table for storing the data.
      Use Transaction SE11 to create a copy of table SDOKCONT1. If you want to create the repository database, you can call the table ZCONT_DB, for example. Save the table as a local object. Activate the table.
Create the repository.
      Use Transaction OAC0 to create a new repository.
      Use the following parameters:
        Repository                              Max. two characters, for example, DB
        Document area ArchiveLink
        Storage type    R/3 database
        Storage subtype normal
        Version no.      0046
        Contents table <table name>     for example: ZCONT_DB
        Exchange directory   <directory name>          for example:
server\share\
      Note that the exchange directory ends with a \ (or a / on Unix). If you are using a variety of platforms, you must use Transaction FILE to define a suitable logical file name, and use this file name.
      Save the settings.
</h4>
<h5>
Everything goes well but when i try to test the Repository created by RSCMSTH0 in SE38 it throws the error </h5>
HTTP error: 404 Business Server Page (BSP) Error
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Business Server Page (BSP) Error
Please help. M i missing anything ..?
<h6>Regards,
Alok</h6>
Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM
Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM

Hi,
I am getting same problem what is the solution??
Thanks
Santhosh

Publish Error when trying to create a webpage

Please help... I'm new to iweb, trying to publish my first webpage with a set of photos from Iphoto. When I push the "publish" button, I get this message:
Publish error
There was an error determining the .Mac publish configuration values. Please try again in a few minutes.
I did try again, and again, and again, but can't get past this error.

I would suggest you send .Mac feedback to Apple:
http://www.apple.com/feedback/mac/tm.html
Be sure to ask for a "status" for iWeb publishing on the main .Mac home page. All the regular services (Mail, iDisk, Sync, Web Pages, etc.) have had green lights for the entire weekend, but it's very clear the "publish" feature is NOT working even though the Web pages themselves are available. It would be really nice to know Apple is aware of the issue with a different indication for publishing pages.
-Doug

Error when trying to upload an app to the App Store (exception while validating)

Hello everybody,
I'm trying to upload an update of a DPS single edition app but when using the Application Loader I have this error:
"Exception while validating: *** -[NSPlaceholderString initWithFormat:locale:arguments:]: nil argument"
Any suggestion? the test app works right in my iPads and I tried to download the zip file (from DPS App Builder) several times with the same result.
Thanks

@Riccardo – I suggest you go to the DPS forum for this:
http://forums.adobe.com/community/dps?view=discussions
Uwe

Error when trying to upload an image

Hi!
I'm trying to upload an image to my container name "vhds" inside storage account "pruebasatfacr" but I'm getting the following error:
[root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string" --container vhds
info:
Executing command storage blob upload
File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
+ Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
error:
getaddrinfo ENOTFOUND
info:
Error information has been recorded to azure.err
error:
storage blob upload command failed
[root@vmlbcatfl49 KVM]# cat azure.err
Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
{ [Error: getaddrinfo ENOTFOUND]
stack: [Getter/Setter],
code: 'ENOTFOUND',
errno: 'ENOTFOUND',
syscall: 'getaddrinfo',
__frame:
{ name: '__1',
line: 270,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev:
{ name: 'StorageUtil_performStorageOperation__1',
line: 251,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev: [Object],
active: false,
      offset: 19,
col: 4 },
active: false,
offset: 2,
col: 15 },
rawStack: [Getter] }
Error: getaddrinfo ENOTFOUND
at errnoException (dns.js:37:11)
at Object.onanswer [as oncomplete] (dns.js:124:16)
at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
I guess that can be a DNS
issue but I need more information about that, does anyone
know why can it be caused?
Thanks in advance!

Hi again and thanks for your response!
I have a VM with Azure CLI tool running with RHEL 6.5, so that I think i can't use AzCopy only compatible for Windows O.S.
The file that I want to upload is located on Azure CLI server and I execute de following command:
[root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string" --container vhds
info:
Executing command storage blob upload
File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
+ Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
error:
getaddrinfo ENOTFOUND
info:
Error information has been recorded to azure.err
error:
storage blob upload command failed
Further info related to this error:
[root@vmlbcatfl49 KVM]# cat azure.err
Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
{ [Error: getaddrinfo ENOTFOUND]
stack: [Getter/Setter],
code: 'ENOTFOUND',
errno: 'ENOTFOUND',
syscall: 'getaddrinfo',
__frame:
{ name: '__1',
line: 270,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev:
{ name: 'StorageUtil_performStorageOperation__1',
line: 251,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev: [Object],
active: false,
      offset: 19,
col: 4 },
active: false,
offset: 2,
col: 15 },
rawStack: [Getter] }
Error: getaddrinfo ENOTFOUND
at errnoException (dns.js:37:11)
at Object.onanswer [as oncomplete] (dns.js:124:16)
at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
Is it possible to continue exploring this option with the CLI tool to upload the file (.vhd)?

Internal Server Error when trying to upload and manage files

The instructor was experiencing this difficulty on Tuesday 1/13, after the notice was closed. I just
went into their site again(1/14/09 2:48pm), launched iTunes U and received the same error after clicking on 'Upload And Manage Files' in their iTunes U page.
I was able to reproduce the same error on our iTunes U site.
https://deimos.apple.com/WebObjects/Core.woa/EditFiles/indiana.edu

I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
/Indiana University/Project Sites/Oncourse Team - FAIL
/Indiana University/Project Sites/SyllabusTest - Success
/Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
/Indiana University/Project Sites/UITS Podcast Team - FAIL
/Indiana University/Project Sites/ePortfolio Playgroun - FAIL
/Indiana University/Project Sites/Testong - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

Apple API Error when trying to upload app in application loader, help?

I'm trying to upload my app to application loader and it keeps showing up this error. Your app contains non-API usage. I used zip files for the choose file thing. So how do I get rid of this error and send my app to apple?

You're going to have a very hard time with what you're trying to do it if you don't know the basics or have enough curiosity to look things up on your own - Google is your friend for API and the hundreds of other abbreviations, acronyms and technical phrases you will eventually encounter.
As for file type to upload, see:
iTunes Connect Developer Guide
Adding New Apps
Managing Your App
Good luck.

Ipod cannot be updated (-50 error) when trying to upload album art

For some reason, when I check the "Display album artwork on your ipod" box, I'll end up with an -50 error, even though the album art is already in iTunes and I can upload songs/photos/videos just fine. Latest version of iTunes and iPod FW.
I've tried unchecking/rechecking the box, ejecting the ipod, restarting the ipod, itunes, Windows, to no avail. Hoping it's just an annoying problem with a simple solution.

disconnect your ipod without ejecting it using itunes. just unplug it, and all the artwork should be there

Publish error when trying to upload pages

Similar Messages

Maybe you are looking for