Publish into SR fails

All,
I'm in my Sender Agreement and want to publish into the Services Registry, but I got this error:
"Could not establish connection to Services Registry; configure connection to Services Registry in SAP NetWeaver Administrator and try again"
I already checked OSS note 1267817, but the strange this is that the details button is disabled and I cannot see which user is used to connect. Anyone any idea?
Maybe I need to assign specific roles to that user?
On my Integration Builder main page, I can connect to the SR.
Thanks a lot
Dimitri

Hi,
Check this thread for user roles:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/8b190fc23e59d9e10000000a1553f6/content.htm
Hope this helps.
Regards,
Siddhesh S.Tawate

Similar Messages

Publishing to MobileMe fails

Not sure what to do here because, MobileMe (formerly dotMac) has worked, all be it slowly, but seamlessly.
I'm trying to publish a modest number of images to a gallery (50 images) prepared for optimized download capabilities. I've done this many, many, many times in the past without issue and typical galleries are several hundred large.
Order of operations:
Place adjusted images in a MobileMe Gallery and select sync
Aperture's Activity monitor shows that syncing is taking place, percentages climb as syncing moving forward, until...
Then at 100% sync, there is a hang and after a period of time, I get the message:
"An error occurred with the publication of album "Cheri Abrams" - Request to the server http://publish.me.com failed.
It is clear that Aperture has published an empty gallery with the name I gave to the gallery I was attempting to publish evidenced by visiting my MobileMe Gallery Albums page.
Can anyone point me in a direction to fix this?
Note: I know about not using stacks when publishing and I've also tried the work around of opening MobileMe preferences in Aperture while trying to publish as several others have documented that for some reason that little dance works.
Thanks in advance for the help!

Wait until the storm is over
Verify in 'System Preferences / MobilMe / Account' that your are logged in to MobileMe,
Locate the file 'com.apple.iWeb.plist' in 'user(you) / Library / Preferences' , delete it (after making a Back-Up ! So that you can restore it if this tip doesn't work for you),
Open iWeb,
Verify that iWeb is logged in to MobileMe,
Do a 'publish to MobileMe'
Does that work ?

Logging into ULOG failed

Hi,
We are using a eLink1.2 product on Windows 2000 OS. A DLL with following extract has been compiled and registered.
ELATRACE(gmsgLevel, 9, ("ESeLinkSynch DLL: Test for <%d> trace level", nTraceLevel));
When the DLL is invoked, the text contents are logged into ULOG. It has been noticed sometimes in production that logging into ULOG fails due to some reason. The Logging stops till the new ULOG file is generated ( at 0000 Hrs on next day ). We notice the following error in stderr file:
GP_CAT:209: ERROR: Write error 9, file C:\TUX\ULOG.021506
Any idea why this happens/how to stop/how to debug on this issue ?
Thanks,
Suresh

Suresh,
In older releases of Tuxedo, Tuxedo did not close and reopen the ULOG file
following a write failure. This problem often caused the logging to
continue to fail until a new log file was opened after midnight.
This problem was fixed in Tuxedo 6.5 Rolling Patch 334 and in Tuxedo 6.4
Rolling Patch 110, and the problem does not occur in Tuxedo 7.1 and above.
If you are running Tuxedo 6.5 or 6.4 at an earlier patch level than the ones
listed, please obtain the latest rolling patch from support.
<suresh_mayanna> wrote in message news:[email protected]..
Hi,
We are using a eLink1.2 product on Windows 2000 OS. A DLL with followingextract has been compiled and registered.
>
ELATRACE(gmsgLevel, 9, ("ESeLinkSynch DLL: Test for <%d> trace level",nTraceLevel));
When the DLL is invoked, the text contents are logged into ULOG. It hasbeen noticed sometimes in production that logging into ULOG fails due to
some reason. The Logging stops till the new ULOG file is generated ( at 0000
Hrs on next day ). We notice the following error in stderr file:
>
GP_CAT:209: ERROR: Write error 9, file C:\TUX\ULOG.021506
Any idea why this happens/how to stop/how to debug on this issue ?
Thanks,
Suresh

Publishing to YouTube Failed: The request timed out.

Why do I get "Publishing to YouTube Failed: The request timed out." when trying to load to YouTube. It doesn't happen all the time, just once in a while but it's been happening everytime for the past week!!
I am using the pre-set drop down feature - Share to YouTube.
Help! Thanks.

Just trying the upload from the desktop: 'Uploading your video. 2616 minutes remaining.'
Am also doing another export using H264 to see if that is quicker. It's only 15mins of footage.

Publishing to Vimeo Failed: The request timed out.

Why am I getting this error message on Final Cut Pro X: "Publishing to Vimeo Failed: The request timed out."? any help is great, thanks.

That would suggest a network problem. It may be transient, so try again in a few hours. If it does not work, try trashing your preferences. In the meantime, there is always a workaround: export a master file, upload using the vimeo site.

Publishing to YouTube Failed: Timed out!

I need help.
I upload videos edited in FCPX to Youtube via the 'share' option, sometimes it works but other times it doesn't and an error message pops up saying 'Publishing to YouTube Failed: Timed Out'. In my video manager page on YT it say's 'failed to convert file' but I don't use anything differently on most of my videos. How can I stop this from happening?

Hi Brian,
I gave up going direct from FCPX and instead went through Compressor by exportiing as an H.264 file. In Compressor I chose the YouTube files as the destination files and they went just as they should. Still peeved that I couldn't go directly from FCPX but it is just a small few steps to go through Compressor. If you don't have Compressor I would highly recommend you get it as it provides a huge range of files to convert to.
Cheers!
Turiteabend

Publishing to YouTube Failed: The operation couldn't be completed. No such file or directory

I am getting the following error in iMovie when I attempt to publish a video clip to YouTube: Publishing to YouTube Failed: The operation couldn’t be completed. No such file or directory. Any ideas about what is going on? I did not find anything directly related to this on general google search...

I'm not certain why this error is coming up, but I have almost 500 youtube videos on youtube, all created through the years with iMovie.
Here is what I find. The publishing tool through iMovie is very sketchy, and doesnt work well most the time. Plus you usually lose alot of quality. Go to File>Share>File. This will then save it as a file to wherever you want. Then when you go to upload on youtube, select this file.

Converting Single Instance database into Oracle Fail-Safe on Linux

Hi All,
We have single instance Oracle10g database running on Linux RHEL4. We are looking to convert this database into Oracle Fail-Safe (Active-Passive). Does any one have document for Oracle fail-safe setup?
Regards,
Tushar

Tushar,
you can't use software for windows on Linux.
However, there's number of ways to implement high-availability solution on Linux Oracle.
You can go with Active-Active (RAC) - which means that you'll have two servers attached to the same database at the same time. You can use either, and if one goes down(due to power failure for instance), the second will still be available.
You can go with Active-Passive (Data Guard) - which means that you'll have one of the nodes being active and the second passive, but synchronized with the first one, so in case of failure of the first node you can activate the second one.
You can also go with linux clustering - which is most similar to MCS + fail-safe - you'll have two nodes clustered with linux clustering software (RH cluseter suite for instance) and connected to shared storage. One node is active, and in case of crash database instance will be automatically started on the second node. This is beneficial because you can use your resources more efficiently. In case if you have two databases you can run each of them on dedicated server and then, in case of node failure move to another one. However, the setup of such configuration is quite cumbersome.

If I put a CD into a failing CD drive...

If I put a CD into a failing CD drive, and the CD drive dies, will I be able to retrieve the disk?

If you take the drive out of the computer, and then take the drive apart...yes.

Reporting (Project Publish) job is failing with 'The given key was not present in the dictionary'

I am using Project Server 2010 with SQL Server 2008 R2.
I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
and how to resolve it.
The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
QUEUE ERROR DETAIL:
General Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
ULS LOG:
Timestamp              Process
TID   Area                          Category
EventID Level     Message Correlation
01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] System.IO.FileNotFoundException: The site
http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80.     at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
userToken)     at Microsoft.SharePoint.SPSite..ctor(String requestUrl)     at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d
PWA Site URL: http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed. Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d

Without seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Insert into CLOB fails with Oracle ODBC driver version 9.02.00.65

I tried to insert into CLOB using the latest Oracle ODBC driver 9.02.00.65 and it fails. But the same works with earlier versions of ODBC driver earlier to 9.02.00.65 ie., 9.02.00.63.
Here is the code snippet I tried. Any help now is highly appreciated as I am in the crunch time.
I tried the same code snippet with VARCHAR2 column with the same driver and it works.
** CONVDSN.C - This is the ODBC sample code for
** creating File DSN pointers to machine DSNs.
**This code is furnished on an as-is basis as part of the ODBC SDK and is
**intended for example purposes only.
#include <windows.h>
#include <stdio.h>
#include <tchar.h>
#include <sql.h>
#include <sqlext.h>
#include <odbcinst.h>
#include <sqltypes.h>
#define MAXDATALEN 25 //maximum data length per column
#define MAX_COL 15 //maximum column in result set
#define MAX_ROW 100 //maximum number of rows
#define MAXBUFLEN 256
#define SQLERR_FORMAT "SQL Error State:%s, Native Error Code: %lX, ODBC Error: %s"
#define MAXDISPLAYSIZE MAX_COL*(MAXDATALEN+1)
#define SQLWRNMSGTITLE "SQL_SUCCESS_WITH_INFO results"
#define SQLERRCNTDTITLE "SQL_ERROR results continued"
#define SQLWRNMSGTITLE "SQL_SUCCESS_WITH_INFO results"
#define SQLWRNCNTDTITLE "SQL_SUCCESS_WITH_INFO results continued"
#define NULLDATASTRING "SQL_NULL_DATA"
#define SQLERRMSGTITLE "SQL_ERROR results"
// prototypes
void ExpandFileName(LPSTR szFileDSNName, LPCSTR szDSNName);
void MakeLegalName(LPSTR szLegalDSNName, LPCSTR szDSNName);
// main routine: Iterate through the user and system DSNs, creating a pointer
// to each.
void FAR PASCAL DisplayError(SQLRETURN nResult, HWND hWnd, SWORD fHandleType, SQLHANDLE handle);
void insertSelectClob();
void checkRcCode(RETCODE rc);
int main (int argc, char* argv[])
     insertSelectClob();
return 0;
void FAR PASCAL DisplayError(SQLRETURN nResult, HWND hWnd, SWORD fHandleType, SQLHANDLE handle)
     UCHAR szErrState[SQL_SQLSTATE_SIZE+1]; // SQL Error State string
     UCHAR szErrText[SQL_MAX_MESSAGE_LENGTH+1]; // SQL Error Text string
     char szBuffer[SQL_SQLSTATE_SIZE+SQL_MAX_MESSAGE_LENGTH+MAXBUFLEN+1];
     // formatted Error text Buffer
     SWORD wErrMsgLen; // Error message length
     UDWORD dwErrCode; // Native Error code
     int iSize; // Display Error Text size
     SQLRETURN nErrResult; // Return Code from SQLGetDiagRec
     SWORD sMsgNum = 1;
     SWORD fFirstRun = TRUE;
     char szDispBuffer[MAXDISPLAYSIZE+1]; // Display Buffer
     szBuffer[0] = '\0';
     do
          // continue to bring messageboxes till all errors are displayed.
          // more than one message box may be reqd. as err text has fixed
          // string size.
          // initialize display buffer with the string in error text buffer
          strcpy(szDispBuffer, szBuffer);
          // call SQLGetDiagRec function with proper ODBC handles, repeatedly until
          // function returns SQL_NO_DATA. Concatenate all error strings
          // in the display buffer and display all results.
          while ((nErrResult = SQLGetDiagRec(fHandleType, handle, sMsgNum++,
               szErrState, &dwErrCode, szErrText,
               SQL_MAX_MESSAGE_LENGTH-1, &wErrMsgLen)) != SQL_NO_DATA)
               if(nErrResult == SQL_ERROR || nErrResult == SQL_INVALID_HANDLE)
               break;
               wsprintf(szBuffer, SQLERR_FORMAT, (LPSTR)szErrState, dwErrCode, (LPSTR)szErrText);
               iSize = strlen(szDispBuffer);
               if (iSize && (iSize+strlen(szBuffer)+1) >= MAXDISPLAYSIZE)
               break;
               if (iSize)
               strcat(szDispBuffer, "\n");
               strcat(szDispBuffer, szBuffer);
          // display proper ERROR or WARNING message with proper title
          if (nResult == SQL_SUCCESS_WITH_INFO)
               MessageBox(hWnd, szDispBuffer, (fFirstRun? SQLWRNMSGTITLE : SQLWRNCNTDTITLE),
               MB_OK | MB_ICONINFORMATION);
          else
               MessageBox(hWnd, szDispBuffer, (fFirstRun? SQLERRMSGTITLE : SQLERRCNTDTITLE),
               MB_OK | MB_ICONEXCLAMATION);
          if (fFirstRun)
               fFirstRun = FALSE;
     while (!(nErrResult == SQL_NO_DATA || nErrResult == SQL_ERROR || nErrResult == SQL_INVALID_HANDLE));
void insertSelectClob()
SQLCHAR clobdata[1001];
SQLCHAR resultdata[1001];
SQLINTEGER ind = SQL_DATA_AT_EXEC;
SQLCHAR *bufp;
     SQLINTEGER cbOrderID = sizeof(SQLSMALLINT);
     SQLSMALLINT sTmp=13;
     SQLCHAR *sqlStmt1 = _T("INSERT INTO clobtbl(id, clob1) VALUES(?, ?)");
     SQLCHAR *sqlStmt2 = _T("SELECT id, clob1 FROM clobtbl");
//     SQLCHAR *sqlStmt1 = _T("INSERT INTO testInsert(id, clob1) VALUES(?, ?)");
// SQLCHAR *sqlStmt2 = _T("SELECT id, clob1 FROM testInsert");
int clobdatalen, chunksize, dtsize, retchklen;
     HENV envHnd;
HDBC conHnd;
HSTMT stmtHnd;
RETCODE rc;
     int nRowcnt=0;
     SQLPOINTER pToken = NULL;
rc = SQL_SUCCESS;
// ENV is allocated
rc = SQLAllocEnv(&envHnd);
// Connection Handle is allocated
rc = SQLAllocConnect(envHnd, &conHnd);
rc = SQLConnect(conHnd, T("testd734"), SQLNTS, T("ipathdba"), SQLNTS, T("ipathdba"), SQLNTS);
printf(_T("Insert CLOB1 using SQLPutData...\n[%s]\n"), sqlStmt1);
// Set CLOB Data
int i;
SQLCHAR ch;
for (i=0, ch=_T('A'); i< sizeof(clobdata)/sizeof(SQLCHAR); ++i, ++ch)
if (ch > _T('Z'))
ch = _T('A');
clobdata[i] = ch;
clobdata[sizeof(clobdata)/sizeof(SQLCHAR)-1] = _T('\0');
clobdatalen = lstrlen(clobdata); // length of characters
chunksize = clobdatalen / 7; // 7 times to put
     rc = SQLAllocHandle(SQL_HANDLE_STMT, conHnd, &stmtHnd);
// Step 1: Prepare
rc = SQLPrepare(stmtHnd, sqlStmt1, SQL_NTS);
// checkSQLErr(envHnd, conHnd, stmtHnd, rc);
// Step 2: Bind Parameter with SQL_DATA_AT_EXEC
rc = SQLBindParameter(stmtHnd,
1,
SQL_PARAM_INPUT,
SQL_C_SSHORT,
SQL_INTEGER,
0,
0,
&sTmp,
0,
&cbOrderID);
rc = SQLBindParameter(stmtHnd,
2,
SQL_PARAM_INPUT,
SQL_C_CHAR,
SQL_LONGVARCHAR,
clobdatalen*sizeof(CHAR),
0,
(SQLPOINTER)clobdata,
clobdatalen*sizeof(CHAR),
&ind);
// checkSQLErr(envHnd, conHnd, stmtHnd, rc);
// Step 3: Execute
rc = SQLExecute(stmtHnd);
     while (rc == SQL_NEED_DATA) {
          rc = SQLParamData(stmtHnd, &pToken);
          if (rc == SQL_NEED_DATA) {
               for (dtsize=0, bufp = clobdata;
                    dtsize < clobdatalen;
                    dtsize += chunksize, bufp += chunksize)
               int len;
               if (dtsize+chunksize < clobdatalen)
                    len = chunksize;
                    rc = SQLPutData(stmtHnd, bufp, len*sizeof(SQLCHAR));
               else
                    len = clobdatalen-dtsize;
                    rc = SQLPutData(stmtHnd, bufp, SQL_NTS);
          rc = SQLParamData(stmtHnd, &pToken);
// Fails as row count retrieved is zero.
     rc = SQLRowCount(stmtHnd, &nRowcnt);
     if(rc != SQL_SUCCESS)
          DisplayError(rc, NULL, SQL_HANDLE_ENV, conHnd);
rc = SQLFreeStmt(stmtHnd, SQL_CLOSE);
printf(_T("Finished Update\n\n"));
rc = SQLAllocStmt(conHnd, &stmtHnd);
if (rc != SQL_SUCCESS)
printf(_T("Failed to allocate STMT\n"));
exit(-1);
// Clear Result Data
memset(resultdata, 0, sizeof(resultdata));
chunksize = clobdatalen / 15; // 15 times to gut
rc = SQLExecDirect(stmtHnd, sqlStmt2, SQL_NTS); // select
     if(rc != SQL_SUCCESS)
          DisplayError(rc, NULL, SQL_HANDLE_ENV, conHnd);
// Step 2: Fetch
rc = SQLFetch(stmtHnd);
for(dtsize=0, bufp = resultdata;
dtsize > sizeof(resultdata)/sizeof(CHAR) && rc != SQL_NO_DATA;
dtsize += chunksize-1, bufp += chunksize-1)
int len; // len should contain the space for NULL termination
if (dtsize+chunksize<sizeof(resultdata)/sizeof(CHAR))
len = chunksize;
else
len = sizeof(resultdata)/sizeof(CHAR)-dtsize;
// Step 3: GetData
rc = SQLGetData(stmtHnd,
2,
SQL_C_CHAR,
(SQLPOINTER)bufp,
len*sizeof(CHAR),
&retchklen);
if (!_tcscmp(resultdata, clobdata))
printf(_T("Succeeded!!\n\n"));
else
printf(_T("Failed!!\n\n"));
     if (conHnd)
          SQLFreeConnect(conHnd);
     if (envHnd)
          SQLFreeEnv(envHnd);
}

Hi,
Since 9.2 has been desupported for error correction you will not be able to download that version from OTN. You should ask whoever is providing the training if their is an alternate version you can use. The only versions that you will be able to download from oracle.com is 10.2 11.1, and 11.2.

Inserting XML document into XDB fails with can't convert to OPAQUE

Hi,
When I try to insert a document using oracle 9.2.0.5 client software into a 9.2.0.5 database, with the following code:
void insertDocument(String document) {
XMLType xt = XMLType.createXML(connection, document);
PreparedStatement ps = connection.prepareStatement("insert into xmldocuments values(?)");
ps.setObject(1, xt);
ps.executeUpdate();
The setObject function always throws an exception (after a very long time) with:
java.sql.SQLException: Fail to convert to internal representation: OPAQUE()
This also fails when we use the InputStream and org.w3c.xml.Document variants.
We use the OCI driver, otherwise we get errors retrieving the documents from XMLDB.
What is going wrong here?

David,
If you search through the historical data in this list there are previous post regarding opaque.
These may be useful. Possibly your reaching the size limit.

Importing Virtualbox VM into pool fails with any errors VDI 3.0

I'm at the last stage of importing my VM's into mypool which I created and the importing fails with Job failed. I do not have large space /var/tmp and have setup a link to the VM's
FINER: THROW
com.sun.vda.service.api.ServiceException: File copy failed for server 192.168.0.25.
at com.sun.vda.service.vbox.Storage.copyFileToVolume(Storage.java:396)
at com.sun.vda.service.vbox.VBDesktopProvider.importImage(VBDesktopProvider.java:1300)
at com.sun.vda.service.vbox.VBDesktopProvider.newDesktopInstance(VBDesktopProvider.java:225)
at com.sun.vda.service.core.jobs.ImportJob.runJob(ImportJob.java:49)
at com.sun.vda.service.core.jobs.Job.run(Job.java:122)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:417)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.FileNotFoundException: (No such file or directory)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at com.sun.vda.service.vbox.Storage.copy(Storage.java:773)
at com.sun.vda.service.vbox.Storage.copyFileToVolume(Storage.java:386)
... 10 more
Apr 4, 2009 1:40:15 PM com.sun.vda.service.persistence.PersistentJob commit

Thomas,
Thanks for your reply. I have finished the VDI 3.0 Install and everything works fine now. For some reason even though the Storage OS was opensolaris 2008.11 but running on a VM it did not like that and once I dedicated a seperate box, then things worked fine. I just redid the install of the VM to try if it goes through and this time it works well. So my setup as of now has everything running on a ASUS MBD whitebox with Open Solaris running as a VM in Virtual Box and acting as a ZFS Storage (Virtualbox is running inside the GA release. However I would like to run everything in one OS which would be the GA. I tried setting up the iSCSI interface in GA and it did not work. Any ideas on how I can make this work on just one platform ?

Importing ditamap into RoboHelp fails

I am trying to import a ditamap (created in FrameMaker) into RoboHelp. I am able to create Web output using command line DITA-OT, which is what RH uses in the background. But when I try in RH, I get the following error:
Error occurred while importing C:\......\a.ditamap. See Output View for details.
The Output View says:
Processing with DITA Open Toolkit failed. No Logs found.
Check DITA Open Toolkit is installed and working.
Well, as I said, DITA Open Toolkit is indeed installed and working for the exact ditamap that fails in RH. Even more puzzling is the fact that my colleague, who we believe has the same setup as I do, is able to import the ditamap.
We are both using RoboHelp 10.0.0.287, which I believe is the latest update available. Please correct me if I'm wrong! Our machines are Windows 7 and we have FrameMaker 11 (not that it should matter). DITA-OT is 1.6.3.
I found some talk about this problem from an old post (here), in which someone stated that Adobe is working on this. Any ideas whether that is still the case, or if I can try anything else?
Thanks,
Heather

Thank you for your reply, RoboColum(n). It turns out that the solution was to use DITA-OT 1.5 rather than 1.6.3. I was mistaken when I said above that my colleague and I had the same setup. He has been running the OT 1.5 for quite some time and since I recently installed it, I went for the newer version.
We can use version 1.5 for what we need, but it is rather strange that version 1.6 does not work to import ditamaps in RoboHelp. The information I found states that version 1.6 improves performance, provides clearer error messages and has undergone significant code cleanup.
I would be interested to know if Adobe will be keeping up with future versions of the DITA Open Toolkit. There are plans to incorporate the creation of context-sensitive webhelp in a future version, which would be really helpful for us.
Thanks again,
Heather

Aperture & Publish for Approval fails with webserver . . .

I'm trying to get Publish for Approval working with Aperture. We are able to load the webpage on the client's browser, she can select an image, but when she hits "submit," Safari can't open the page "because the server is not responding."
10.5.4, Aperture 2.1.1, Publish for Approval 1.5. The Apache2 error log:
Mon Aug 04 13:58:20 2008 warn Init: Session Cache is not configured hint: SSLSessionCache
Mon Aug 04 13:58:21 2008 notice Digest: generating secret for digest authentication ...
Mon Aug 04 13:58:21 2008 notice Digest: done
Mon Aug 04 13:58:21 2008 notice Apache/2.2.8 (Unix) mod_ssl/2.2.8 OpenSSL/0.9.7l DAV/2 configured -- resuming normal operations
Mon Aug 04 13:58:46 2008 notice caught SIGTERM, shutting down
Mon Aug 04 13:58:46 2008 warn Init: Session Cache is not configured hint: SSLSessionCache
Mon Aug 04 13:58:46 2008 notice Digest: generating secret for digest authentication ...
Mon Aug 04 13:58:46 2008 notice Digest: done
Mon Aug 04 13:58:46 2008 notice Apache/2.2.8 (Unix) mod_ssl/2.2.8 OpenSSL/0.9.7l DAV/2 configured -- resuming normal operations
Mon Aug 04 14:13:20 2008 error http://client 192.168.93.10 File does not exist: /Library/WebServer/Documents/favicon.ico, referer: http://192.168.93.10/1941/index.html
Mon Aug 04 15:56:17 2008 error http://client 192.168.93.10 client denied by server configuration: /Users/david/Sites/
Mon Aug 04 16:26:59 2008 error http://client 65.96.217.170 File does not exist: /Library/WebServer/Documents/favicon.ico, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 16:28:17 2008 error http://client 65.96.217.170 _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL., referer: http://71.232.115.230/1941/40.html
Mon Aug 04 16:28:59 2008 error http://client 65.96.217.170 _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL., referer: http://71.232.115.230/1941/index.html
Mon Aug 04 16:33:17 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/40.html
Mon Aug 04 16:33:17 2008 error http://client 65.96.217.170 Premature end of script headers: Aperture-Submit.acgi, referer: http://71.232.115.230/1941/40.html
Mon Aug 04 16:33:59 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 16:33:59 2008 error http://client 65.96.217.170 Premature end of script headers: Aperture-Submit.acgi, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 16:38:17 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/40.html
Mon Aug 04 16:38:59 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 17:16:56 2008 error http://client 65.96.217.170 _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL., referer: http://71.232.115.230/1941/index.html
Mon Aug 04 17:17:55 2008 error http://client 65.96.217.170 _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL., referer: http://71.232.115.230/1941/02.html
Mon Aug 04 17:21:56 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 17:21:56 2008 error http://client 65.96.217.170 Premature end of script headers: Aperture-Submit.acgi, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 17:22:55 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/02.html
Mon Aug 04 17:22:55 2008 error http://client 65.96.217.170 Premature end of script headers: Aperture-Submit.acgi, referer: http://71.232.115.230/1941/02.html
Mon Aug 04 17:26:56 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/index.html
Mon Aug 04 17:27:55 2008 warn http://client 65.96.217.170 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/02.html
Mon Aug 04 18:03:28 2008 notice caught SIGTERM, shutting down
Mon Aug 04 18:04:30 2008 warn Init: Session Cache is not configured hint: SSLSessionCache
httpd: Could not reliably determine the server's fully qualified domain name, using Russia.local for ServerName
Mon Aug 04 18:04:31 2008 notice Digest: generating secret for digest authentication ...
Mon Aug 04 18:04:31 2008 notice Digest: done
Mon Aug 04 18:04:31 2008 notice Apache/2.2.8 (Unix) mod_ssl/2.2.8 OpenSSL/0.9.7l DAV/2 configured -- resuming normal operations
Mon Aug 04 18:47:55 2008 error http://client 192.168.93.10 _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL., referer: http://192.168.93.10/1941/index.html
Mon Aug 04 18:52:55 2008 warn http://client 192.168.93.10 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://192.168.93.10/1941/index.html
Mon Aug 04 18:52:55 2008 error http://client 192.168.93.10 Premature end of script headers: Aperture-Submit.acgi, referer: http://192.168.93.10/1941/index.html
Mon Aug 04 18:57:55 2008 warn http://client 192.168.93.10 Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://192.168.93.10/1941/index.html
We've opened ports 80 and 443 on the firewall, and tried to approve and submit locally, with the same results.
If anyone has any ideas on how to get this to work, it would be great. We have a lot to submit, and the client really would like to do it on line.
Thanks,
David

Thanks for your input guys.
We discovered that we originally had used Publish for Approval 1.1, and subsequently have changed to version 1.5, which no longer uses the third party app.
Unfortunately, we still have the same problem, the client's browser stops loading when he or she hit's the "submit" button.
---> Could the installation of the 1.1 and third party app have left some preferences that need to be deleted or settings that need to be reset?
---> The error message on the client's web browser now states that the "server unexpectedly dropped the connection." Trying again later is not successful.
The error logs for Apache2 from the most recent attempt are different than with the 1.1 version of the software:
[Tue Aug 05 11:56:50 2008] [error] [client 76.24.22.217] File does not exist: /Library/WebServer/Documents/favicon.ico, referer: http://71.232.115.230/1941/index.html
[Tue Aug 05 11:57:50 2008] [error] [client 76.24.22.217] File does not exist: /Library/WebServer/Documents/1941/images/blank.gif, referer: http://71.232.115.230/1941/12.html
[Tue Aug 05 11:58:18 2008] [error] [client 76.24.22.217] _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL., referer: http://71.232.115.230/1941/12.html
[Tue Aug 05 12:03:18 2008] [warn] [client 76.24.22.217] Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/12.html
[Tue Aug 05 12:03:18 2008] [error] [client 76.24.22.217] Premature end of script headers: Aperture-Submit.acgi, referer: http://71.232.115.230/1941/12.html
[Tue Aug 05 12:08:18 2008] [warn] [client 76.24.22.217] Timeout waiting for output from CGI script /Library/WebServer/CGI-Executables/Aperture-Submit.acgi, referer: http://71.232.115.230/1941/12.html
I don't know much about this, I just want my client to be able to approve the images through the Aperture interface.
Thanks again, I really appreciate the help.
David

Publish into SR fails

Similar Messages

Maybe you are looking for