Publish issue with Cap 6: Background bitmapped/not showing/copied from previous slides

Hi,
I have been working on a course for a while, publishing and having no issues. This morning when I tried to publish a few of the lessons, I am noticing that there are parts of the background from one slide appearing on the next. Also, on some slides, I see a couple of square areas of the background and nothing else. The captions and voiceover are fine though.
Can someone please help - the course is due today!
Thank you
Michele

I believe I have figured out the resolution, although not sure why it happened?
When I publish, I choose the setting "Force re-publish all the slides", the screens are fine - no issues. I think I will just  check this all the time
Michele

Similar Messages

  • Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

    Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
    We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

    Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
    I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

  • Hi  have the ipod touch and having issue with the reminders app. do not have the reminders page  just the completed page

    hi  have the ipod touch and having issue with the reminders app. do not have the reminders page  just the completed page

    The problem has been fixed with the most recent OS X software update.

  • After the IOS 7.1 update I have issue with Game Center, I'm not been able to  load the  games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

    After the IOS 7.1 update I have issue with Game Center, I'm not been able to  load the  games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Anyone had issues with on/off sleep button not working anymore

    Anyone had issues with on/off sleep button not working anymore?

    If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.

  • TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    Greetings,
    Questions:
    1. What version of the Mac OS are you running (Apple > About this Mac)?
    2. What version of the iOS are you running (Settings > About)?
    3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
    4. Do other changes to synced information like Address Book content sync successfully back and forth?
    Based on your description it sounds like you have a 1 way sync issue.  Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
    Try:
    Backup your computer and iOS devices before doing anything else:
    http://support.apple.com/kb/HT1427
    http://support.apple.com/kb/ht1766
    Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
    Make separate backups of critical data:
    Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
    Backup your computer iCal: http://support.apple.com/kb/HT2966
    Reset syncing on your Mac: http://support.apple.com/kb/TS1627
    Reply back if that does not resolve your issue.
    Hope that helps.

  • Gradient filled background is not showing up in Internet Explorer on a PC.

    My gradient filled background is not showing up in Internet Explorer on a PC.
    I'm working on a MAC, so I don't know of anyway to preview a new MUSE Site in I.E. since it's no longer supported on a Mac.
    When the Home Page is viewed, my blue sky gradient background shows up as a white box?? I need a fix for this please.
    Here is my url:  www.ThanksSanta.org

    Hello,
    We might have to look into your .muse file to have a better look into the issue.
    I tried it on a sample file but it worked fine for me.
    Could you please e-mail your .muse file on [email protected] You can use Adobe SendNow service (https://sendnow.acrobat.com/) to send your file in case it is larger than 20MB.
    Please do not forget to mention the link to this forum in your e-mail.
    Regards,
    Sachin

  • Background does not show up when creating a PDF in InDesign

    I have placed the same image in Illustrator and the PDF does show up the image.

    Ooh. Ok. Thank you! I'm using InDesign CS5.5, Acrobat 10.1.6. Mac OSX (10.6.8).
    Layer 1: background (TIFF): does not show up
    Layer 2: Type and logos (EPS): do show up in my pdf.
    -When I select Overprint Preview in Indesign the background is missing.
    -I have created pdfs in different presets (smallest, high quality, etc) and still background does not show up.
    -When I place ONLY the background on a new InDesign document, it does show up in the PDF.
    -I have created a pdf with the background in Illustrator and it does show in my PDF.
    Thanks!

  • Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

    Had to wipe my drive so I could do a clean install of snow leopard.   Now I have look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old settings.  The instructions I have found or no help or needs more clarafication on what to do.

    Use migration assistant to move your files.  http://support.apple.com/kb/HT4889

  • How do I send an email with a group address and not show the addresses/names of the recipients?

    How do I send an email with a group address and not show the addresses/names of the recipients?

    Use BCC.   That's blind carbon copy.   And copy paste the address into the BCC field.  It really depends what e-mail program you use how to enable BCC.

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

    I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

    shldr2thewheel wrote:
    If this is the case: How to enable AirDrop over ethernet and AirDrop on unsupported macs running Lion  .
    http://osxdaily.com/2011/09/16/enable-airdrop-ethernet-and-unsupported-macs/
    Interesting.  Googling, I see that someone posted that on these discussions as well:
    https://discussions.apple.com/thread/3331216?start=0&tstart=0
    which mentions what I recall: that Airdrop (as implemented by Apple) would create an on-demand ad-hoc Wi-Fi connection, even if you were already connected to an access point.  Normally, you can't connect to multiple Wi-Fi networks, thus the reason for Airdrop only supported on newer Wi-Fi chips.
    And Apple's KB:
    http://support.apple.com/kb/HT4783

  • What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

    What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

    Hello,
    I am facing following issue regarding web analytic service for specific date 2014-08-18:
    Verified following services which are running and status was success on that specific date 2014-08-18 :
    Web Analytics Service
    Microsoft Usage Data Import
    Microsoft SharePoint Foundation Usage Data Processing
    Observed latest Web Analytics Setting as below :
    LastAggregationDateId 
    20140817 -   The date id of the last successfully completed data aggregation
    LastAggregationTime
    2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
    LastBestBetSuggestionAggregationDateId
    20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
    LastDataCopyTime
    2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
    Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
    In order to verify the same I have checked as follow:
    SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
    WHERE  [DateId] = 20140818
    Above SQL Query has returned ZERO value.
    Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
    Your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    The image itself has the answer
    The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
    The Web Analytics service logs this in the “.usage” files.
    A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
    Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
    The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
    Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
    This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
    Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
    Regards Chen V [MCTS SharePoint 2010]

  • Additional fields not getting copied from change req to change doc

    Hi,
    I created some addtional customer fields which I added both in change req and change doc.But the entries given to those fields are not getting copied from change req to the change doc as like standard SAP fields are getting copied.
    Please let me know if someone worked on the similar issue.
    Regards,
    M.R

    Hi,
    We have done a similar requirement of adding additional fields in Quotation doc type  at header and item level .
    Also we have got the Reference data of the order being created to flow in to Additional Data B .
    This is purely Abaper's Coding .when you add Additional Fields there is screen logic also to be coded for these screens .
    to get the Reference order data logic has to be written in PBO of the screen which u have added additional fields .
    the reference data will be validated with "VGBEL" field in VBAK table .If VGBEL is not initial then Query the VBAK table for this data in VGBEL into Internal table or work area and update the screen fields in additional data with these fields .
    I have done the same and it is Working Wonderful .
    Try this and Let me know Further. All the Best.
    Thanks,
    DevendraP.

Maybe you are looking for

  • Can`t delete WLAN Networks (Nokia E52)

    Hello! I tried to connect to a wlan network (Name) and entered a wrong wep key. After i found out how to change the wep key i realised that i had more networks (Name01, Name02). I still can`t connect to my initial network as the wep key is still inco

  • Hi all, im a newbie and in need of help on contact form if anybody could help

    hi everybody, im new to the site and relatively new to dreamweaver. i have used a template for my website and edited all the relative information to tailor it to my business.  As i am not familiar with the contact forms i am struggling to find out ho

  • Encoder position WITHOUT counter input

    Question: I have three incremental encoders connected to my M-Series DAQ board (PCI-6229) that has TWO Counter input channels.  I am measuring the position of each encoder.  How do I measure the position of the third encoder if I have used-up both co

  • Update 3G - Error code 1015

    Hi; Was given an iphone by a friend who said it weren't working anymore. Tried to get it into recovery mode to install IOS 4.2.3 (I think, anyway - doesn't show the version number now?) with iTunes 10.5.3.3 Went through the update process but then dr

  • [Solved] The uvcvideo module is being deregistered

    I autostart the module by having added to /etc/modules-load.d and in general it works just fine. This is the output of: journalctl -b | grep uvcvideo Mar 06 08:16:49 LillaArch kernel: uvcvideo: Found UVC 1.00 device USB Webcam (0bda:5727) Mar 06 08:1