"publish" not making changes

I've updated the site and click "publish" but the changes to not appear. I've saved it and such...
what should I do?
thanks! LP

try emptying the cache in your browser.
Often you don't see the changes with your own computer right away because your browser is opening the previously cached files stored on your hard drive rather than retreiving the new page from the internet.
Emptying your cache should fix this or just add a "?" to the end of the address in the address bar and hit return, this seems to force the browser to get the file from the internet rather than use the cache.
Good luck, David
ibook & imac Mac OS X (10.4.9)

Similar Messages

IWeb is not making changes to published page.

After making changes minor changes to my webpage and hiting publish. iWeb tells me it's published and to visit the site. Nothing has changed! I saved the changes made, quit iWeb and restarted, hitting publish. Nothing changes. I have not changed text or anything other than my schdule. Any ideas..... it's pretty important. Thanks.

You should read and heed this User Tip: Do not install MacKeeper
OT

Dreamweaver template not making changes

Hello everyone,
I have been assigned to a new client and thus "take over" an existing website. This website is setup in Dreamweaver using Templates.
The main Template is using "Param"s to switch the state of the buttons, on or off.
So, I create a new page and link it to this Template. All seems fine.
Next, I would like to change which button is "on".
Based on my research it appears you must do this change through the "Modify>Template Properties" panel. Not by editing the code by hand.
So, I open this up, click on the button code I want to change, hit OK, and I can see that in the head it has changed the Param code.
Now I have the code below.





The defaults are all "true" and the one I just changed is "false".
However, the button state of #4 still has not changed. I have tried various buttons and nothing seems to change.
This perplexes me. Is there something else I need to edit?
Any ideas would be helpful thanks!
Mr Zedd

Thanks "typoman" and "Murray ACE" for your quick responses. I appreciate it.
I was going to post a link to the files in question, but your responses prompted me to do some more testing, specifically to verify that in fact this  code is actually being used.
So, I created a child page and then step-by-step went through and changed the state of each of the 13 buttons. Surprisingly all of the button states changed, except the one I needed, #6. When I changed that state nothing happened at all, but when I changed the #7 button both 6 & 7 buttons changed.
Going back to the Template I found that someone had put in the head code correctly:

but in the body itself there was no #6, only two #7's:

So, once I edited this code everything now works.
Thanks for your input, as it helped me to find the issue.
Gracias!
Mr Zedd

IPhone Music Sync not making changes?

So, I've been having this issue for a while and it's annoying the heck out of me. What happens is that once I sync a song over to my iPhone, I can't make any changes to it at all via my computer. An example would be me syncing Pink Floyd's "The Wall", noticing that it has the wrong release year, changing it on iTunes, syncing it over, only to find out that it still keeps the wrong release year. This problem covers everything. Ratings, lyrics, anything related to music data. Deleting the songs/albums does not fix it, as the phone still retains the incorrect data. The only way to get rid of it is to do a complete restore, which I've done 4 times in the last two days. Help?

What do your options say when you plug the iPhone into iTunes?
Mine look like this
Make sure manually manage music and videos is selected.
Have you tried:
Sync over Wi-Fi
Using a different cable to connect iPhone to your computer
Check when editing ID3 Tags on songs/albums that they save in iTunes
I run into these issues all the time and I use iTunes all day everyday. Trust me I know it's a hassle sometimes the best solution for me is to get a better source when getting your music.

Font style changes not making it to the css

“I made changes to the text color on my welcome page, and for some reason the style is not making it to the css for that page. I pushed the publish, but the style is not in the css file. I don’t want to have to add it in manually- help!”

I am having the exact same problem - text that I make bold shows up on the live site as actually lighter in color than the normal text. But it ONLY happens on the Welcome page, which I notice is what your message is about...

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

PO with Reference to RFQ (Qty, Price) could not be changed

Hi All
Please help how to restric user not to change Qty, Prices of PO if created with reference to RFQ.
Regards
Aamir

Hi Amir,
Goto SPRO->Mtrl Mgmt->purchasing->environment data->default attributes of system messages->system messages
Here for verison 00 application 06 msg quotation qty greater than po qty make it error message so that user cannot enter more than Quotation qty when he is making PO w.r.t to RFQ,
I'm not able to recall message number may be it is 078, just check there.
Regards

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

Have had to re-download Mozilla due to malware - final step of installation asks if I will allow unknown publisher to make changes to computer - click YES and get message my computer is infected with malware - click NO and cannot open Mozilla

Long story short, unwisely allowed unknown publisher to make changes to my computer (which I thought was related to my anti-virus protection) last night. In the process, seems I allowed malware (called antivirus8). Neither Explorer or Mozilla were available - seemed to have been wiped out by antivirus8 thing. Explorer came back up (with favorites still intact) after doing full scans and a few other things...but Mozilla did not. Uninstalled Mozilla and re-downloaded. Final step of installation asked if I wanted to allow an unknown publisher (and I'm sorry to say I don't remember exactly what it was...something with safe in the name, I think) to make changes to my computer. Clicked NO and still not able to access Mozilla...redid and clicked YES and immediately got message that my computer was infected with malware. Have used Mozilla for years...hate just having Explorer. Anti-virus program is Kaspersky...ran full scan and it did not detect a thing...so I really don't know what happened!

Try running several malware scanners to see if Kaspersky missed anything. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
* [http://www.safer-networking.org/en/home/index.html Spybot S&D]
If the above malware scanners do not find any malware or can not clear it, you should consider posting in one of these forums for specialized malware removal help:
* http://forums.spybot.info/
* http://www.spywarewarrior.com/index.php
* http://forum.aumha.org/
* http://www.bleepingcomputer.com/forums/
* http://www.spywareinfoforum.com/

Referncing document should not be changed

Dear SAP Gurus,
I have a scenario and it is for example that if sales order is created with reference to the quotation so quotation should not be changed....and the sales order should have the same material which is copied from the quotation and we should not enter other material in the sales order which is not in the quotation and same thing for the delivery.......so can anybuddy tell me that from where we can control this thing from the standard system......
Regards,
mohsin

Basically i am making the sales order with reference to quotation and in the sales i can add the item which is the standard functionality but my client dont want this......my client want that sales order is created with the quotation so u cannot add item in the sales order and the quotation can not be changed...and it is for same in the delivery level also....when i am making the delivery with reference to sales order so still i can add item in the delivery order which my client dont want this....and my client also want that delivery order is created with the sales order so th sales order cannot be changed.......so if there is a user exit for this can any one tell me exact user exit......
regards,

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

SAP workflow not published / not reaching default outbound handler

Hi,
At Velocity event (october) we had a SAP ERP workflow configured for publishing to SharePoint; after triggering workflow instances, an XML payload document was successfully published to SharePoint.
Now, in the same environment; without changes on Duet Enterprise config level, publishing of task changes of that same workflow no longer publishes into SharePoint.
We executed the report jobs OSP_DELTA and OSP_FULL to make sure that the sync from SAP to SharePoint would be done / task changes are notified. The SAP workflows are delivered into the SAP inbox; but not published to SharePoint.
We added a breakpoint (internal + external) in the default outbound handler S_OSP_WF_PAT_DEFAULT_CH_OB; it is not invoked when we reach the workflow decision step that is published.
We inspected the SCL Logs, but didn't find any relevant log entries.
Any clue what can be wrong here; where to start with the problem analysis?
Best regards, William.

Hi Holger,
The error 'Users not maintained...' appears to be caused due lack of SAP permissions of the SAP account that is executing the report S_OSP_WF_ITEM_SELECTION; with another account we succesfully pass the 'GetNotifications' calls within that report; and actually now do get into the default outbound handler.
But still no task document published into SharePoint; the default outboundhandler faults on Send Action item; error details:
ERROR_CONTEXT>
<ERROR_INFO>ICF Error when sending the request: HTTPIO_ERROR_SEND_STATE-Fehlermeldung beim Senden der Daten.</ERROR_INFO>
- <CONSUMER_INFO>
<CONSUMER_PROXY>CO_OSPWACTION_ITEM_VI_DOCUMENT</CONSUMER_PROXY>
<LOGICAL_PORT>CO_OSPWACTION_ITEM_VI_DOCUMENT</LOGICAL_PORT>
<OPERATION_NAME>maintainActionItem</OPERATION_NAME>
<OPERATION_NAMESPACE>urn:ActionItemWsd/ActionItemVi/document</OPERATION_NAMESPACE>
<PROCESSING_UNIT>Sector 1: WS-Consumer</PROCESSING_UNIT>
<PROCESSING_MODE>Synchronous</PROCESSING_MODE>
<COMMUNICATION_TYPE>Remote</COMMUNICATION_TYPE>
<WORK_PROCESS_NUMBER>1</WORK_PROCESS_NUMBER>
<WORK_PROCESS_PID>25034814</WORK_PROCESS_PID>
<TERMINAL_NAME>C0269450</TERMINAL_NAME>
</CONSUMER_INFO>
- <TRANSPORT_INFO>
<PROTOCOL>HTTP/1.1</PROTOCOL>
<AUTHENTICATION_METHOD>BasicAuth</AUTHENTICATION_METHOD>
</TRANSPORT_INFO>
</ERROR_CONTEXT>
We want to check the settings of Consumer Proxy for Workflow (page 76 in deployment guide); however we don't see 'Connection Settings' entry in the SCL server.
--> 4. Select Connection Settings > SCL to Consumer > Configure Service Endpoint.
Regards, William.

After Making Changes In Log4j.xml Application Needs Recompilation?

Hello,
I am using log4j in my jsp pages and for that I instantiating Logger class like this
Logger logger = Logger.getLogger("test.jsp");
{code}
And I have log4j.xml in the classpath.
I believe, priority levels can be changed and log level can be changed without re-compiling.
Change the log4j.xml and re-run jsp pages.
However I need to re-compile after making changes in log4j.xml file. Without re-compilation changes are not getting reflected.
Why I need to re-compile application in order to see the changes I have made in log4j.xml?
Appreciate any help in this regard.
Regards

This is the contents of my log4j.xml, its under WEB-INF/lib
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">

<appender name="sout" class="org.apache.log4j.ConsoleAppender">
    
    <layout class="org.apache.log4j.PatternLayout">
      <param name="ConversionPattern" value="%d [%c] %p - %m%n"/>
    </layout>
</appender>
<root>
    
    <priority value="off"/>
    <appender-ref ref="sout"/>
</root>
</log4j:configuration>

IPad is not making any sound

iPad is not making any sound when typing, watching video from YouTube and video from cameroll. I don't even hear when I receive notification. My mom and dad has the same problem on their iPhone 4s. My mom when to apple store to replace for a new phone but do I have to go to the apple store to replace it too? I also tried a restore but it did not work. Please answer!
Thank you

DISCONNECT BLUETOOTH.
After doing all the ridiculous resetting and changing/checking the settings by the advice given on these forums and on YouTube, I finally discovered that if you have your apple device connected to any other device by bluetooth you will not get any audio but by the device it's connected to. How un-awesome is that? Ive always been used to how my android devices work with Bluetooth which is when the system you're connected to is off or in a different mode, you still have audio. That makes perfect sense and is convenient, right? But I thought my brand new ipad was busted when I connected to my entertainment system by Bluetooth and haven't been getting any audio the last few weeks. So basically I need to go into settings every stinking time if I want to hear my game or show my wife a YouTube video. Regretting ever got this overpriced tablet...

"publish" not making changes

Similar Messages

Maybe you are looking for