Publish Page HTML and SWF

Dear Experts.
I have two files: A file with extension .html and other with extension .swf.
I uploaded the two documents in the KM in a folder.
I created a KM Document iview for display this page that was uploaped in the portal KM but the system not work. This not show the page html.
What is the cause of this issue?
Regards

Dear puneet . Thank You. The issue was solved
I follow the steps:
1 iView template - create an iView from an existing iView template
1.1 Next
2. URL iView
2.1 Next
3.
3.1 iView Name: KM_Test
3.2 Iview ID: KM_Test
3.3 Master Language: English
3.4 Next
4.
4.1 Enter URL
/irj/go/km/docs/documents/Folder/abc.html
4.2 Next
5. Finish
Regards

Similar Messages

Issue with publish settings: html and swf files

In Flash CS5.5 when selecting, Publish Settings: html and swf, the html file does not display the swf from the URL after ftp. The swf file, however, does display from the URL without the html file. My work around has been to hand code the html. Is this a known issue or is there something else that might be causing this to occur?

Here are two examples created by two different students in the same lab using the same software configurations:
http://www.miszxbrii.byethost13.com/howellanimatic.html
The first frame of this one displays only.
http://vaivadesigns.byethost3.com/YoungMidterm/YoungMidterm.html
Here it is again with a new html page:
http://vaivadesigns.byethost3.com/YoungMidterm/midterm.html
The swf path was the documents folder and another folder on the HD.

Urgent: Flash design in published html and swf damaged after few more steps

hi everyone, i really need your help and really appreciate your quick reply! my flash design crashes! i published everytime i finished few steps. first few publications in html/ swf were okay, but after a few new steps the things all went wrong: the button went missing, the whole did not stop at frame1 as in my action script, some of the images went missing... i then deleted new steps hoping to get the thing back to normal, but it remained. after every futile effort i did (restarted pc, republished, saved as...), i suspected that there are BUGS whether in flash or in my pc, i did an experiment by simply creating a new layer and inserting an image in the layer, i published, and this time all the images has gone! Can i send you the corrupted flash design for better explanation? I wish to hear from you soonest as i'm very urgent rushing for a project to pass up today! Thanks in advance!

Perhaps the best lesson you can learn from this is to save often and give the saved file a new name, fla_version1, fla_version2, etc.
You want to be able to go back to a previous version so you don't lose it all.
Best wishes,
Adninjastrator

Publishing as HTML5 and SWF loses scaling

Good day,
I am having trouble with publishing my Captivate 6 projects to use both the SWF and HTML5. When I just post it as a HTML5, the scaling works fine. However, when I use the multiscreen.html, the HTML5 loses the scaling when it opens on the iPad. Everything else works as it should (correct file type chosen for device, etc.), but the scaling in the HTML5 file fails.
Any ideas?
I am posting these files to an LMS if that matters. Otherwise - Cap 6, Windows 7/iPad version 6.0.1.
Thanks!
Jenn

Anybody? Our new LMS went live today and I still haven't found a solution for this.

HTML and SWF file

I have a basic HTML set up, and then I've created a SWF audio
player to play the music of my band. I am trying to accomplish two
things. First, I have 4 clickable images, when I select one of the
4 images it directs the user to a song that will be played through
my swf music player, click on another image, another song plays. Or
the user can just go to the music player and play the music that
way. How do I set this up? I have everything laid out via XHTML, I
just don't how to send information to grab what I need through the
SWF file.
Thanks

Is there a way to have a button you click to go through my
swf file, with HTML coding and go to a specific music track?

Presenter published to HTML5 and SWF works in Firefox and Chrome but not in IE 11

I was under the impression the IE 11 could handle HTML 5.

Could you please let us know the exact issue you are facing while playing the HTML5 content on Internet Explorer 11. Which version of Presenter you are using ?
To View the HTML5 content on desktops and laptops you need the following browsers.
• Internet Explorer 10 or later
• Firefox 4.x or later
• Chrome latest
• Safari 6.0 or later
Regards,
Rajeev.

User changes the page HTML code on the fly and it works... what?!

Hi,
I have a report region that generates a number of checkboxes using htmldb_item.checkbox. Each checkbox is associated with a date, and what dates are displayed are based on a number of business rules.
The user then can select any date she wants (from the available list) and click "Confirm". A page process will identify the selected checkboxes (using the g_f01 array) and do some processing with them.
For my astonishment, a savvy user found out that, using a plug in like firebug, he could easily modify the page HTML and ADD extra checkboxes to the report, with WHATEVER dates he wanted! When submitting the page, Apex would not complain and would process those extra dates as if they had been sent when the page was generated.
Well you can imagine the potential impact of this... As a workaround, before processing the dates, I re-apply the same business rules just to be sure those are valid dates.
So I am a bit lost here... Has anyone else seen this before? Shouldn't Apex identify that there is extra data in the submitted page and raise an error? Is it my fault, the web platform is so insecure that I should be checking everything everywhere and not rely on the submitted data being reliable?
Any comments welcome.
Thanks,
Luis

Hi, thanks for sending the link for that plug-in, I can't wait to tell my users so they can start using it... :)
I understand that this in a way is due to the intrinsic weakness of the platform (I developed C/S applications for years and never heard of end users hacking Oracle Forms or Powerbuilder applications... at least not that easily)
On the other hand, I think that Apex should offer a minimum of automatic checking... for instance, if a tabular form rendered 10 rows, the submitted data should contain the same 10 rows, not more, not less. In fact that was my assumption. Maybe this is something that can be improved?
Luis

Help with publishing website templates and creating a menu please?

Hello, I’m new to this website and flash so please bear with me.
I have purchased a website template from istockphoto (example… http://www.istockphoto.com/file_closeup.php?id=631369 ), which is easy to upload pictures on to, but i have a few questions...
I have now uploaded my images on to it, but please can you give me some advise on how to publish it on to the Internet? I have bought my own domain name but I don’t have a clue how to link it to this web template, and I can’t seem to find any specific information.
Also I want to create a menue with 8 different subject categories, each with a separate image gallery and I don’t know how to link them together and list them in a ‘home page’.
If you could give me some tips or a link to some information that would be fantastic!
Thankyou very much in advance! Any help would be very much appreciated as i have been searching for a few days now and i don't understand how it works.
Donna

First, after exporting your FLA to SWF, you have to embed it into an html page, then upload both html and swf to your host.

In Flash CS4 a generated html with swf file won't play swf

Using Flash CS4 and having the Flash plug-in ver 10 on my PC, the generated html file will not play the swf in the browser.
I noticed that the active-x javascript is now included in the header as well as the javascript portion in the body tag.
But it won't play. I get the typical blank window in IE with the "X" in the upper left corner.
I don't have this problem with Flash CS3.
Any ideas what may be going on?
Thank you.

I am having similar difficulty; mostly I am confused.
I want to open a flash video file in a frame within a webpage.
I have generated a Flash CS4 html and swf file. When loaded they play, but they play on a separate, full size web page, not in the frame where I want it.
I then generated FLV and F4V files but that doesn't work.
It appears that I need to insert the object and embed tags "for Flash Movies" in the html file.
Once I do that, do I go back to only putting in the html and swf files and create a link to the html file to bring up the video in the target frame?
What are the FLV files for?

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

When I reload an HTM page using a SWF file like a   menu, the HTML page doesn't shows the SWF again!

Dear Sirs,
I hope to be directing my question into the correct forum's place.
I'm new in flash and I'm trying to make some tests
My problem is the following:
I included one SWF file into 3 HTM pages.
This SWF works as a little menu.
The SWF file (named "menu.swf") contains 3 items working as command buttons to access the three different HTM pages
Each HTM page contains the same "menu.SWF" file, some HTML text and one picture.
The swf contains:
Button 1 -> calls page1.htm using:
            on (press) {
            getURL("./page1.htm", "_top");
Button 2 -> calls page2.htm using:
            on (press) {
            getURL("./page2.htm", "_top");
Button 3 -> calls page3.htm using:
            on (press) {
            getURL("./page3.htm", "_top");
When I enter to "page1.htm" it appears correctly showing the swf file and all the HTML text.
It is OK.
But when I'm in "page1.htm" and I click on "Button1" (to reload "page1.htm") the only thing that I can see (after reloading page1) is the HTML text and the picture, but I cannot view the "menu.swf" file.
"menu.swf" remains in its place, but "invisible".
You can click on its command buttons, but anytime I click on the button that loads the same page (for example: "Button 1" to reload "page1.htm") the
swf file(s) doesn't appears.
The same thing happens when I'm in page 2 with Button 2 to reload page2 .htm, and so on.
How can I do to solve this problem?
Sorry for my not good english but I'm spanish speaker.
Thank you!
Gus

The path in the buttons is not correct once you navigate to the htm page.
So here you are on the landing page and the menu button says to get to "page1.htm" go up one folder level (../) to the file page1.htm.
Now once you are up one level, either you loose access to the .swf because from that page the path to the .swf is not correct, or if the .swf does show, then the path in the buttons back to the other pages is not correct, because you are now one folder level higher.
If I am mis-reading your post and all pages are in the same folder, then remove the "../" part before the page name in the URL. Or perhaps you are using ./ to denote the current directory... I'd still suggest removing it. So the the getURL would look like this :
getURL("page1.htm", "_top");
if all pages are in the same folder.
And if I am reading your post correctly, then you cannot use the same button URL to get to ("./page1.htm", "_top"); and once on page1.htm use that same URL to get back down to your landing page.
So I'd say it's a pathing problem.
Give that a try and see if it helps.
Best wishes,
Adninjastrator

Can someone help? Adding a playbar to embedded mp4 video and publishing to html 5

Hi everyone, I am having a hard time finding a solution. I am sure someone MUST have gone through this same challenge.
We have some lessons we want to convert to html 5. These lessons have embedded swfs, which we converted to mp4's. The problem now is that the embedded mp4s do not display with a playbar INSIDE of Captivate when we publish to HTML 5. The videos needs a playbar for users to control what they are seeing on the screen. Any ideas on how I can have the mp4s have a playbar in Captivate?
Thanks

Hello,
Welcome to Adobe Forums.
This is a known issue with Adobe Captivate 6 and already passed to concerned team.
Thanks,
Vikram

Printing Header and Footer once in HTML and on all pages in RTF and PDF using one RDF

Hi,
I am using a single RDF to generate reports in HTML,PDF and RTF.
For printing the header only on the first page I used the
following trigger
begin
srw.get_page_num (page_num);
IF upper(:P_FORMAT) = 'HTML' THEN
if page_num = 1 then
return(true);
else
return (FALSE);
end if;
ELSE
return (TRUE);
END IF;
end;
I alo require to print the footer once on the last page in case
of HTML and on all pages for RTF and PDF.Is there any way I can
get the total number of pages or is there any other way to
acheive this. ???
Any help would be appreaciated .
Thanks,
Alka

Generally, one template can not create nice output in all formats. In your case, you would need a format parameter to suppress headers/footers if it's value is 'EXCEL'. The problem is (I wish someone would correct me on this) that we can not refer the standard parameter already there and have to create another, user-defined parameter.

Efficient page size for print and SWF doc?

I have to create an AR for a client who wishes to have it saved out as a SWF file for online usage, in addition to the printed books. I'm just wondering if there's a more efficient page size, other than 8 1/2 x 11", that would work better for online. As it is, I find the 8 1/2 x 11 size is a bit difficult to turn the pages in SWF. Comments please?
Thanks in advance.
Sandra

You are right and wrong. It stems from terminology and taking this a bit literally. Yes, margins do not print. However, they do print. Typically you set margins as "guides" for page layout and it ends there. If, you have elements that print in the margin areas, then they ( the elements ) will print. Let's say you have a business card layout that equal 2"h x 3.5" w ( horizontal ). You can set a margin of .25" all the way around the card as a guide. Now you apply a background bleed color of 100% Black at 2.25"h x 3.75"w ( 1/8" bleed all the way around ). Eventhough you have a margin of .25", the Black will print entirely including the bleed. Now, Page Margins are different. Most desktop printers do not include bleed in an 8.5" x 11" page size. For instance, my inkjet printer has non-printable areas or page margins that do not print. They equal something like .139" top, left, and right with a bottom margin of .6". Unless your printer has an option for "borderless" printing, there is a non-printable margin in the Page Setup. This is different than layout margins which are printable and used as guides. So, if your desktop printer does not have "borderless" printable areas ( option found in Print > Page Setup ), you'd have to print your 8.5" x 11" layout on a larger page size and then trim it down later. Let me know if you have any other questions. I hope I cleared it up for you. Let me know if I didn't.

Creating publishing page in specific folder and with custom page layout using JSOM

Hi!
I have a site collection under my root, in which I have a page library with a folder inside. I want to create a publishing page inside the folder using JSOM. The API provides the following information on the three possible ways of how you can create a publishing
page.
PublishingPageInformation with all defaults.
PublishingPageInformation.Name and PublishingPageInformation.PageLayoutListItem.
PublishingPageInformation.Name, PublishingPageInformation.PageLayoutListItem and PublishingPageInformation.Folder.
Source - SP.Publishing.PublishingPageInformation Properties (sp.publishing)
Since I want to create the page in a specific folder in the page library, I have to go for the last option.
I have a function call chain that look as follows:
getLanguageID(webUrl, languageID)
.then(function(resolveVal) {
language = resolveVal;
return checkPageExist();
.then(getEditorialNewsFolderJSOM)
.then(getAssociatedPageLayoutListItem)
.then(addPublishingPage)
The first two methods,
getEditorialNewsFolderJSOM
getAssociatedPageLayoutListItem
fetches the required data as SP.Folder- and SP.ListItem-objects.
The problem occurs when
addPublishingPage
is called. This method, in turns calls this function.
var pageInfo = new SP.Publishing.PublishingPageInformation();
pageInfo.set_name(publishPage.title);
pageInfo.set_pageLayoutListItem(pageLayoutListItem);
pageInfo.set_folder(editorialNewsFolder);
pageCreationContext.newPage = pubWeb.addPublishingPage(pageInfo);
clientContext.load(pageCreationContext.newPage);
clientContext.executeQueryAsync(function() {
publishPage.isPageCheckOut = true;
resolve();
}, function(error) {
reject(precio.intranet.resource.errCreateContent_addPublishPage);
The error happens when this function is called with the page information object.
SP.Publishing.PublishingWeb.addPublishingPage(pageInformation)
Error:
Cannot read property '$2t_0' of undefined
and it happens in SP.Runtime.js.
I've tried this
sample code from the MSDN-team, and added the pagelayout and folder properties, but it renders the same error.
Creating a page directly in the page library with a blank SP.PublishingPageInformation object works perfectly fine!
What could possibly be wrong? The error isn't something that I can debug myself since it happens in SP.Runtime.js, and the documentation for this is very sparse!
Any help on how to resolve this issue would be helpful!

Hi Vinay,
This may be useful:
https://blogs.oracle.com/jdevotnharvest/entry/remote_task_flow_vs_wsrp

Publish Page HTML and SWF

Similar Messages

Maybe you are looking for