Publish Photo refuses to work

Hi all, I've done a bit of troubleshooting and still cannot resolve this issue. I was trying to load an iphone photo to my mobileme gallery today and it would not work, would not connect. It would give me the following message:
"Check your MobileMe name and password in settings."
I did so, even deleting my password and re-entering it. Got the same message. Checked my mail on the phone and that worked. So, it is connecting somehow. Read this article:
http://support.apple.com/kb/TS1672
Tried to do the locate, after enacting "push" (which I never use per battery drainage concerns) and that did not work. Could not locate my phone. Turned off the wi-fi I was on in my office, trying to get it through via 3G. So, it actually let me get to the publish page at this point, HOWEVER, at the bottom in the account section, it just perpetually reads "loading." Never actually connects. Went back to mail again...again it was able to retrieve mail. The password that lets me into my mail is working, and should be the same password across the board, so why am I suddenly having issues with publishing to mobile me? I did restart the phone. That didn't resolve the issue. I've tried all I can, still no joy. It does connect, and pull mail, when in mail on my mobile me account, so what gives with publishing. I cannot get it to connect either on 3G or wifi. Just constantly get "Unable to connect to MobileMe" when trying to upload a photo. Oh, and this has worked in the past, if that matters. I have a whole gallery of successfully published iPhone photos. Any clues? Thanks.

Allan, deleting the account worked. It was weird however. When I first reset it, tried to reestablish the account on the phone, it set it up, but showed the account "inactive." So, that was certainly an unanticipated surprise. I did some searching and found a number of people who also had .mac accounts show as "inactive" on their phone and had to go through the process of setting up a new password. I did so on .mac, deleted the account on the phone again, then re-established it with the new password and suddenly it worked. And not only did it work, but publishing photos to mobileme worked as well. That whole process doesn't seem to make any sort of sense, but after some hurdles, it's now working. Thanks!

Similar Messages

  • IWeb 08 Published Photo Links Not Working

    Hello,
    I've recently switched over to iWeb 08 and really dig all the new functions. I am running into one spot of trouble and hope that someone might shed some light on it for me.
    I've got a few images that I use as hyperlinks rather than text. The hyperlinks are fully functional while in iWeb and everything is fine in the inspector window, yet when I publish the site, the links are no longer operational.
    Anyone have a quick fix for this one? As the images are thumbnails which point towards the full-size image, using text is not an option in this case.
    Thanks in advance!
    ~Lola

    I publish to my desktop, then use Fetch to upload the files to my host at netrfirms.
    www.lolabydesign.com
    The non-functioning thumbnail links are at:
    http://www.lolabydesign.com/LolaByDesign/Bead_Gallery.html
    I just noticed that some of the text links are inoperable as well, altho they check out fine in iWeb itself - seems kind of random.
    The text links that no longer work are at:
    http://www.lolabydesign.com/LolaByDesign/Shop_Instructions.html
    Thanks for your assistance!
    ~Lola

  • Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

    Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

    Cellular data is a feature from your phone carrier.  Have you contacted them to resolve your issue.

  • I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

    I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

    Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
    After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
    Hope this helps.

  • Problem publishing Photo page with iWeb 08

    Hello,
    I have a problem when publishing photo pages with iWeb 08. Upload starts and then I get the error message that iWeb encountered a problem while publishing. The funny thing is that I can see
    the photo page in Safari. The only problem is that when starting the slide show I can not see the
    forward/backward buttons. Publishing a photo page with iWeb from a .me web photo gallery works without any error message, but still when starting the slideshow the navigation buttons are not displayed. Actually if you click on the place where the navigation buttons are supposed to be,
    you can go picture forward/backward. Any idea ?

    I am having the same issue, except I do not get any error messages when publishing to a folder. Clicking on the "index" file within the folder will open the photo page in both Safari and Firefox. Everything functions as designed except no forward/backward/pause buttons are visible below the slideshow. There are text box outlines with a question mark where these buttons are supposed to be located, and I can pause, advance or reverse slides. Eventually these question mark outlines disappear and stay disappeared.
    The end result is there are no intuitive graphic indicators on the slide show to even suggest to the viewer that he/she has some control over the presentation. I don't believe I can add explanatory text boxes to the slide show to compensate for the missing icons. This lack of visible control elements in the slide show is a huge issue. I am reasonable sure the problem does not reside within my computer. I've also reviewed inspector control options for a photo page/slide show and haven't gotten any combination of check boxes to make a difference.
    I'm beginning to think this may be an unexpected conflict that was contained within a recent software update. It might well be worth a close look at programming code by Apple technicians. In the meantime, can anyone offer a clue as to what might be going on?

  • Aperture won't connect to facebook when publishing photos...

    Hello,
    I am getting this error message when I try to publish photos to my facebook account...
    "An unknown error occurred. Please try again later."
    I have tried numerous things that I have seen work for other people in the past but with no sucess...
    I made sure the secure web browser (https) settings in facebook were disabled
    I made sure login aprovals was turned off in facebook
    I deleted Aperture from the applications folder, and downloaded a new copy from the app store
    I updated my facebook password
    I am using Aperture 3.4.2
    If anyone has any insight it would be very helpful!
    Thanks!

    Looks like I had no apps in my FB account so once I started a game app then the Aperture app was able to be installed.
    Case closed

  • IPhoto 11: how to reveal shared/published photos in bulk?

    How can I reveal, easily and quickly, which photos... out of thousands... have been shared/published?
    The only place I can find that info is in the side bar, but publication information appears for only one photo at a time. I have to go through my libraries in bulk.
    I have a couple massive iPhoto 11 libraries (+35,000 photos and videos, in each) on two Macs.
    (I have a couple of young kids... there are a lot of family photos.)
    These libraries each exceed 300 gb, and the computers are groaning under the weight... at this point, iPhoto isn't performing any better than iTunes.
    I have back ups, but I want to reduce these libraries to managable sizes... once.
    Because iPhotos syncs with flickr and facebook, I don't want to accidentally delete shared/published photos.
    At the moment, my working solution is a smart list that excludes renamed and edited photos, and renaming unwanted photos to easily identify and delete in bulk, but it's not a perfect solution.
    Many thanks.

    There is no easy way do do what you want. Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
    Rather than renameing those photos bound for the Trash bin try using a keyword or flag them. Adding a keyword to multiple photos at one time is rather easy:  select the photos, type Command+K to bring up the Keyword pane and click on the keyword you want to add.
    I don't know what success you've had in deleting large qualtities of photos at one time but be aware many have problems with large deletions.  The general reponse to those that do is to delete is batches of 100-200 at a time. Just a heads up.
    OT

  • I can't publish photos to facebook anymore with Iphoto...

    I can't publish photos to facebook anymore using Iphoto...A small window opens requesting my FB email & password and to accept FB's terms. Once I add the info and hit "login" a message shows underneath saying: An unknown error occurred. Please try again later.
    This started after I changed my password in FB... I tried to log out from FB; I quit Iphoto and deleted the FB account in Iphoto to re-add it; I went to Apps allowed on my FB account... and Nothing works!!! This is SO annoying! HELP????????

    take a look at the user tip on FaceBook - it has helpoed some people
    LN

  • Multimedia Key inoperative, photo editor not worki...

    My N96 is now running 20.015 firmware. I have freed up as much phone memory as possible by moving messaging to my 4Gb mmc. I have installed all possible apps to the 16Gb drive. The phone memory is showing 60.8MB of free space. I have reinstalled the 20.015 firmware.
    However there still seems to be several functions which do not work correctly. Most notably the MultiMedia Key refuses to work and it is not possible to edit photos or videos. When I try to edit photos , even small ones, the edit page is simply blank except for the words at the bottom, OPTIONS-APPLY EFFECT-BACK.
    Any possible solutions would be greatly appreciated.
    I am seriously considering posting this to Nokia to be looked at although I feel I should do a Prince Charles and revert to my trusty old N95.
    After so much disappointment with this N96 I am now afraid to order a N97.
    Adrian Smith

    Hi,
    Please rename opm.db file @:
    Win:C:\Users\<user ame>\AppData\Local\Adobe\OOBE
    Mac:Users Library/Application Support/Adobe/OOBE
    Sign in again.
    Thanks,
    Shikha

  • 3 week old 60gb iPod Photo won't work

    I bought a 60gb iPod Photo approximately 3 weeks ago. Very, very happy with my purchase even with the release of the video enabled Pod recently.
    Anyway - this morning it refuses to work. It won't power up. Nothing. Blank screen.
    Have tried all the resetting suggested in Apple support. Nothing. It just won't power up under any circumstances. (Tried plugging it to AC as well)
    Very frustrated.

    Perhaps you should take it back to an Apple Store if possible, to have it checked.

  • IPhone 4 Photos Accelerometer not working

    I just received a new iPhone 4 and the Photos application appears to ignore the accelerometer and is always stuck in portrait mode. All other apps work fine, just Photos is not working. This is a new phone setup, not a restore from a previous phone. I have triple checked that the screen rotation lock is off and I've turned off photo sync in iTunes, deleted all photos and re-synced; it still does not work. Anyone have any ideas?

    1) Press and Hold the Home and Wake Sleep buttons until the Apple Logo appears.
    2) If that doesn't work, try a reset, To reset go to Settings, General, Reset, Reset.
    If it still doesn't work, take it in to an apple store so the expert can test it out.

  • Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

  • How can I publish photos to more than one Facebook account?

    How can I publish photos from iphoto to more than one Facebook account?  Another way to ask is how to add a second Facebook account to the account list in iphoto?

    Open iPhoto Preferences, click on the "Accounts" icon, and add another account.

  • ICal refuses to work

    After updating to Lion 10.7.5, iCal refuses to work: won't change day/week/month, no previously entered appointments shown, can't add any new ones either. Now what? Of course, I have no backup (didn't think I needed to with iCloud). Aim is 1) to restore function, then 2) populate back from iPod Touch Any help appreciated.

    andybacon wrote:
    After updating to Lion 10.7.5, iCal refuses to work: won't change day/week/month, no previously entered appointments shown, can't add any new ones either. Now what? Of course, I have no backup (didn't think I needed to with iCloud).
    I'll just address the backup issue, iCloud is NOT a backup system, you still need one.

  • Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

Maybe you are looking for