Publish pictures, then what?

I use Adobe Lightroom to publish pictures to the web. What's a simple tool for maintaining the rest of the web site? I originally did it with Microsoft Word. I just need to index the Lightroom published sections (Spring Photos, Summer vacation, Last weeks soccer game). Every year, I create a new index page. There are a few other simple pages as well.
Dreamweaver seems like it is way more than I need. I'm more concerned about the learnig curve than the cost.

kahawk wrote:
I originally did it with Microsoft Word.
Oops .
kahawk wrote:
Dreamweaver seems like it is way more than I need. I'm more concerned about the learnig curve than the cost.
http://www.coffeecup.com/html-editor/
(Windows or Mac?)
Rob

Similar Messages

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name:             APPCRASH
Application Name:                  iTunes.exe
Application Version:               10.4.0.80
Application Timestamp:          4e262cfr
Fault Module Name:               QuickTime.qts
Fault Module Version:             7.70.80.34
Exception Code:                     c0000005
Exception Offset:                    00146b30
OS Version                                                            1033
Locale ID:
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information4:          0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.

Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

How do I change desktop folder/safari pictures to registered business icons, I have tried almost every how to on-line but none are worki? I have treing. First how do I get the icon I need from the website and then what?

How do I change Mac desktop folder/safari pictures to registered business icons? I have tried almost everythin but none are working. First how do I capture the business icon from the website, then what?

OK, well to start with, you must have the icon file in the correct format. You need to end up with an .icns file. One of the how-to articles should tell you how to do this - iConvert will also do it.
If it is in the correct format, when you click the icon file to highlight it, and click cmd-i, you will see the Get Info window - at the top left, you should see a mini version of the icon. If you do NOT see that icon correctly, the file is not the correct format. So this will not work for a jpg or png file, for example.
Once you have this window open, go to the thumbnail, click it to highlight it blue, and click cmd-C to copy.
Go to your Safari app from the Applications folder (not from the dock), again click cmd-i to open its Get Info window, and again click its icon to highlight it blue. Now click cmd-V to paste. You will be asked for your admin password to authenticate. The icon should now become the one you've pasted in.
You may need to log out and back in for the effect to show on the application file itself.
You might also want to look into Candybar if you plan on doing a lot of icon customization.
Matt

When i was scrolling through my camera role today before i updated and like 100 pictures turned into a picture thats white then says PNG. Cant see the picture. What should i do?

when i was scrolling through my camera role today before i updated and like 100 + pictures turned into a picture thats white then says PNG. Cant see the picture. What should i do?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

When published iWeb then visit, no updates...what happened?

I am creating my website and clicked published and then i wanted to visit my site, when i do there are no updates - what happened?

i have read the posts. i have emptied my cache. i still don't see an update. i look at the file in iDisk, and it reflects the changes i made. but safari does not. any thoughts?

I have Photoshop Elements 12. When I open the organizer, click on a picture, then want to use the Editor, I get an error message. If I click on the Editor from the Welcome screen, error message. What happened to my Editor?

I have Photoshop Elements 12. When I open the organizer, click on a picture, then want to use the Editor, I get an error message. If I click on the Editor from the Welcome screen, error message. What happened to my Editor?

I would suggest un-installing via the Windows control panel and then download again and re-install. Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads

I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

It was easy to set up, easy to use, got done watching the movie. Transferred from HDMI to TV and as my question above notes. I am on TV, my cable information (show/channel/etc) show OM the banner on the bottom of the screen, I can view the channell guide, but, my screen is white, no picture no sound? Other than that I got nothin

I would like to migrate from Aperture. What happens to my Masters which are on a RAID array and then what do I do with my Vault which is on a separate Drive please ?

I am sorry, but I do noisy understand what happens to my RAW original Master files, which I keep offline on a RAID array and then what I do with my Vault which as all my edited photos ? Sorry for such a simple question, but would someone please help my lift the fog ?
Thanks,
Rob

Dear John ,
Apologies, as I am attempting to get to the bottom of this migration for my wife ( who is away on assignment ) and I am not 100% certain on the technical aspects of Aperture, so excuse my ignorance.
She has about 6TB worth of RAW Master images ( several 100 thousand ) which, as explained, are on an external RAID drive. She uses a separate Drive as a Vault . Can I assume that this Vault contains all of her edits, file structures , Metadata, etc ?
So, step by step........She can Import into Lightroom her Referenced Masters from her RAID and still keep them there ? Is that correct ?
The Managed Files that are backed up by her Vault , are in the pictures folder of her MacPro, but not in a structure that looks like her Aperture library ? This means Lightroom will just organize all the Managed files, simply by the date in the Metadata ? Am I correct ( Sorry for being so tech illiterate ).
How do I ensure she imports into Lighgtroom in exactly the same format as she runs her workflow in Aperture ? ( Projects, that are organized by year and shoot location and Albums within those projects with sub-locations, or species , etc ). What exactly do I need to do in Aperture please to organize Managed Files to create a mirror structure of Aperture on my internal Hard Drive ?
There are a couple of points I am unsure about in regard to Lightroom. Does it work in the same way as Aperture ? Meaning, can she still keep Master Files on an external RAID and Lightroom will reference them ? If the answer is yes, how do you back up your Managed ( edited ) work in Lightroom ? ( Can you still use an external Drive as a Vault ? ) . Will the vault she uses now be able to continue to back up Managed Files post migration ?

IWeb won't publish pictures in sRGB

Hi all,
Got iWeb 09 and running it on latest OS on MacBook Pro. Here is the problem - no mater what options i choose - it publishes pictures in some other profile other than sRGB. The problem is that when viewed in anything other than Safari - pictures look terrible (bleak, dull and lifeless).
Here is how the workflow goes:
1 - Prep images in Photoshop (all in sRGB)
2 - Save them in sRGB
3 - Import pictures into iPhoto
4 - When building gallery and adding pictures in iWeb, add images form Media Selector.
5 - Publish to local folder
6 - check images - dull, lifeless and in wrong color profile.
I've also tried to add pictures by dragging them from Finder into the iWeb - same result.
Tried turning on/off web optimization in iWeb and iPhoto, no change.
Please help

Welcome to the Apple Discussions. Do you know what profile is being embedded into the photos? What's the URL of your site so we can see first hand?
OT

My macbook boots up get a screen picture then screen goes blank, when boots up I get the sound then a screen then screen goes black is this a battery problem or something else?

my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.

Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!

You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion. I want to upgrade the hdd to ssd. Do I need to buy a new copy of mountain lion to install on the ssd? If not, then what is the procedure to transfer?

I have a hdd from a late 2009 mbp. I upgraded from leopard to snow leopard to lion to mountain lion. Now I want to upgrade to a ssd. Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd. Will it be pheasible with so many OS X upgrades? And then how do I get my user accounts onto the ssd from the hdd. Do I use migration assistant? Do I need to make a time machine backup first? Should I use something called Carbon Clone or something like that?
Thanks for reading

If you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao.

I cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

i cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

Definitely sounds like an issue with your Wi-Fi network. Do any other devices on the network have similar issues? Is it an issue only with downloading apps? You can check by trying to load a website in Safari.
I would try turning your Wi-Fi router off for 1 minute, and back on again.
After doing that, disconnect and re-join the Wi-Fi network on your iPhone and try downloading an app again.

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

http://support.apple.com/kb/HT4236

Question about free down loading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns if I down load Mavericks then what will happen to Bangla

Question about free downloading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns is, if I download Mavericks then what will happen to Bangla language in mountain lion? Samar Laha

No reason to be embarassed. You are not alone.
You will need an external drive. If you have a Time Machine drive without enough disk space you can create the clone there however it's advised that you keep your Time Machine and clone on separate drives. If the drive dies you loose both types of backup.
Download and install the clone software. Everyone has their favorite. These are the two most common applications used. I prefer SuperDuper because of it's simplicity in setting up. It's also free for the first clone where with CCC you have to give a Credit Card then cancel if you do not want to keep.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Select your drive in the To popup. Click on Copy Now. That's it.
Yes, it really is that simple....

Publish pictures, then what?

Similar Messages

Maybe you are looking for