Publish Planning Book in Portal?

Hi Experts!
I need publish APO Planning Books in Portal.
Can somebody give me the steeps or any documentation about this?
Thank you in advance!

Thank you Senthil
We have the portal running ok for BI reports.
Now we want publish an APO Planning book on this.
a) can you confirm to me if this is possible?
b) any Planning Book can be publish to web, or must be one designer for this purpose?
c) how can I see the Planning books available to be published?
d) how can I publish these?
I will appreciatte too much if you could claify this concepts to me..
Thanks a lot!!

Similar Messages

Security issue after publishing planning book on internet.

Hello experts,
I have published Planning Book of SCM4.1 on internet via integrated ITS.
Now the users can access /SAPAPO/SDP94 i:e planning book via internet.
All the services related to it have been activated in SICF and obejects related to it are published via SE80 like CLPSDP, CLPGLOBAL etc.
Now when a user who does not have authorization for that transaction logins via internet the explorer screen shows the authorization failure below but at the same time also gives SAP EASY ACESS button on the page. On clicking on the icon the users login into the SAP as per the roles assigned to him.
And he can access the system in the same way via internet as we do via SAPGUI.
I dont want to give this access.
Moreover this happens only when authorization for transaction SDP94 fails. If user has authorization he directly sees the planning book and does not gets this button.
Is there any extra service started in SICF which is giving the access even after user is not authorized???
I have checked almost all the services in SICF and tried deactiavting them But no positive results.
Is there any user parameter for the same.??
Kinldy help ???
System information:- SAP release 640 SCM4.1 server.
Best Regards,
Yatindra

This URL should answer your question
http://www.cisco.com/en/US/tech/tk86/tk89/technologies_tech_note09186a00800b123c.shtml

Error while accessing DP Planning Book through Portal. ( internet)

Dear SDN,
We are using a collaborative planning book from SCM 4.0 system, which is published as a service on the ITS (6.20 version). This ITS has been published so that we can access the system from the Broadband, simply like any other website.
The ITS URL is :
http://mmscmoptprd.mahindradms.com/scripts/wgate/webgui/!
The planning book service is
http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!
When we try through our LAN, we can access it.
When entering through broadband, we can see the first page of planning book , i.e. where selection of planning book and planning view is to be made.
Once a selection is made from the dropdown, and when "CHOOSE" button is clicked (for that matter the rectangular box containing the selection criteria and also the Exit button ) we get a message as :
Problems with this Web page might prevent it from being displayed properly or functioning properly.
Line : 714
Char : 1
Error : Object Expected
Code : 0
URL : http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!?client=100&language=en&accessibility=0&DesignBaseUrl=%3A%2f%2fmdwds01.mahindradms.com%3A80%2firj%2fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fits&~design=mm_dms_defaultTheme
and it remains on the same page.
The IView used is of the type :
1. URL IView ... CLPSDP service url is given as parameter URL.
2. IAC IView : web-service is "clpsdp" and "ITS url" is given.
We intend to give either one which should work fine.
I am not able to figure out as due to what reason should this problem arise, either the UI attributes or the publishing or something else.
Request you to please help.
Regards,
chandani
ep consultant
www.bcone.com

Hello,
SInce this is an Portal Error, for quick and efficient replies past it in SAP EP forum.
Thank and regards,
Abhishek

Publishing an APO Planning book to EP

Any ideas on publishing an APO planning book to EP? Are there are business packages available? Couldn't find any on Iviewstudio.

Hello Anand,
I know this post was made a long time ago.. but yet, I wanted to check if you found a business package for APO planning book to implement it on th portal.
Thanks and Regards,
Reena

SAPGUI 7.20 terminated when copy and paste value in planning book.

Hello Experts,
I have window 7 and SAPGUI 7.20 patch level 2. Recently, I encountered an issue where my SAPGUI terminated unexpectly when I use CtrlC and CtrlV of a value from one cell to another in any planning books (DP, SNP, ect.)
A window pop-up with a message "SAP Logon for Wndows has stopped working" , "A problem caused the program to stop working correctly. Please close the program.". The only option to select is "Close the program" and after I selected it, it terminates all of my open SAP option. It happens everytime I use the CtrlC and CtrlV of a value from one cell to another.
Do you know what caused this and how I can correct the issue? Appreciate in advance for your hel

Hi,
Check out OSS notes on the support portal. This seems to be a standard bug; might be SAP has already released some notes to fix this. Otherwise, you may need to raise an OSS message.
Regds,
Ashutosh

I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?

I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?

US only at this time.
Apple doesn't discuss future plans, sorry.
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

Macro to restrict the users to adjust keyfigure in planning book

HI,
My Planning book is using by all the managers, where i need to restrict a keyfigure to enter manually for few users.
Only for 3 users the keyfigure has to open, when they are in planning book, and all other users should not have any access to enter manually any voulmes in the planning book.
i tried framing a macro, but not successfull.
Is it really Macro required to make this? or any other way that we can make this?
if it is a macro can u brief,me how to proceed for the macro.
Thanks in Advance
Arun R Y

I know this is not the forum for this question.
There are APO alerts that use APO transaction /SAPAPO/AMON1 - Alert Monitor.
Can this alert monitor be configured to show up in the universal worklist (UWL) in the portal?
if so would these alerts show up in the alert inbox of the uwl just as other sap ECC alerts do?
(the other alerts i speak of are those referenced here (http://help.sap.com/saphelp_nw04s/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm).
Or are these alerts two totally different types of SAP functionality with the same name (ALERT) ?
Thanks
Ted Smith

Publishing web reports in PortaL

How you will see web report to portals?How you will publish web report in portals?
Sridhar
Edited by: sridhar k on Oct 23, 2009 1:33 PM

Hi,
There should be some Portal team, or you might be having the rights to publish the webtemplates (Queries) to roles.
After this, there will be a role upload logging in to the portal in which you access web reports.
Once after your role upload process is successful, your reports will be successfully published to Portal and you could be able to run the reports from portal.
There should be some book mark (link) to the portal, which needs your username, pwd to login. If there is a portal team, which maintains the Portal, Please get in touch with them to get the Link of the Portal, and request them to assign you roles, so that you can publish the desired reports to role, Normally done from WAD, Opening the report to publish. There after do the role upload, by logging in to the desired portal with your Username and Password.
Thanks,
MD
Edited by: MOHAMMED HUSSAIN on Oct 23, 2009 7:44 PM

Error in updating ALV field catalog in selection tool for Planning Book

Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.

Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant

Upload data from Excel to the Planning Book

We are on APO 5.1. We have APO DP at the moment. I wanted to test upload of data from Excel to the planning book. I have tried several times. I have been unable to see any changed data in the planning. I do not get ANY errors during the upload. But I cannot see any changes that I made in the excel in the planning book. Please let me know what I am doing wrong. These are the step that I follow.
1. Go to planning book.
2. Short list only one key figure e.g Customer Forecast.
3. Go into Details All mode.
4. Download the file using the "Prepare File for Upload" option.
5. Open the saved Excel.
6. Change the values in the excel , save and close.
7. Upload the excel into the planning book using the upload file option.
I do not get any errors during all these steps. However, when I check to see if the values have been updated, the changes made in the excel are not updated in the planning book.

Hello,
Instead of selecting one key figure in data view, please select all key figures of the planning book and then try all the steps which you have carried out.
please revert after you carry out this.
Regards,
Prafulla

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

Key figure Explaination in SNP planning books 9ASNP94

Dear Experts ,
I am curious to know regarding SNP planning books key figures
when i am exploring sap standard Planning book
9ASNP94
Data view : SNP94(1)
I can able to see many KEY FIGURES Please refer below
I AM NOT SURE how they are used in planning , i mean what is clear definition of those key figures and i see some key figures are grey out and some or open for entry
how to find those detail information
when i go to T code SDP84 - define planning book
i can able to see those descrption and infocubes but not sure how to understand clearly , would be more thankful if some give me a clear explaination of it
Forecast     TXT
Sales Order     TXT
Distribution Demand (Planned)     TXT
Distribution Demand (Confirmed)     TXT
DistrDemand (TLB-Confirmed)     TXT
Dependent Demand     TXT
Total Demand     TXT
Distribution Receipt (Planned)     TXT
Distribution Receipt (Confirmed)     TXT
Distribution Receipt (TLB-Confirmed)     TXT
In Transit     TXT
Production (Planned)     TXT
Production (Confirmed)     TXT
Manufacture of Co-Products     TXT
Total Receipts     TXT
Stock on Hand     TXT
Supply Shortage     TXT
Safety Stock     TXT
Reorder Point     TXT
Target Days´ Supply     D
Target Stock Level     TXT
Days´ Supply     D
ATD Receipts     TXT
ATD Issues     TXT
Many thanks & Regards
Raj

Hi
Please find below the short summary of each key figures.
Forecast TXT :- FCST which has been released from APO DP to APO SNP
Sales Order TXT :- Sales order transferred from ECC to APO via CIF.
Distribution Demand (Planned) TXT :- Dependent demand coming from other location to this location for same product. Network planning
Distribution Demand (Confirmed) TXT :- In case deployment , we confirm the Distribution Demand (Planned) will appear her.
DistrDemand (TLB-Confirmed) TXT :- Mainly used in case of TLB.
Dependent Demand TXT :- Dependent demand coming from parent product in case of BOM
Total Demand TXT :- The sum of all above demands is called as Total Demand.
Distribution Receipt (Planned) TXT :- SNP created Purchase req will appear in this key figure.
Distribution Receipt (Confirmed) TXT :- In case of deployment Distribution Receipt (Planned) will be get confirmed in the Distribution Receipt (Confirmed) key figure.
Distribution Receipt (TLB-Confirmed) TXT :- Mainly used in case of TLB.
In Transit TXT :- In will contain the in transit stock which will transfer for ECC via CIF.
Production (Planned) TXT :- Planned order will get created via SNP in case of domestic mfg.
Production (Confirmed) TXT :- In case of SNP deployment Production (Planned) will be get confirmed in the Production (Confirmed)) key figure.
Total Receipts TXT :- Total of all the receipt elements as been used.
Stock on Hand TXT :- Stock has transferred from ECC or R3 via CIF.
Supply Shortage TXT :- This will be calculated with macro based on total demand and total receipt.
Safety Stock TXT :- Based on SNP master data, safety stock will get calculated during planning run.
Reorder Point TXT :- Based on SNP master data, Reorder Point will get calculated during planning run. . There are different methods of calculating safety stock.
Target Days´ Supply D :- The safety stock defined in number of days appears based on SNP master data in APO.
Target Stock Level TXT :- Get calculated by macro based on Target Days´ Supply D and total demand in future.
ATD Receipts TXT :- Mainly used for Deployment.
ATD Issues TXT :- Mainly used for Deployment
If you require any specific information for any key figure please do let me know.
I hope this will be useful for you.
Thanks
Amol

Excel upload data to planning book not working

Hello Gurus,
i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
Here is what i have done so far
1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
3) when i took out the header i simply pasted the values and the file was ok
4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
5) everything was green, then but i do not see the values in the grid of the planning book
what else i'm missing.
can someone please help me
thanks
Ravi

Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
Thanks
Ravi

Meaning of CONDET key figure in standard 9ASNP94 APO SNP planning book

I am trying to clarify the use and meaning of the CONDET (capacity consumption details) key figure in the SAP standard SNP planning book 9ASNP94.
Any advice appreciated...

Hi Frank,
This indeed is practical requirement wih no simple solution ( at least we did not find).
We created a background job for deletion of the stocks ( which were updated through IDOCs like your situation) at specific periodicity. The jobs were made as per planners with specific variants and when planner would like to delete the stocks, the job will be run.
Another option could to be copy the standard program /SAPAPO/RLCDELETE to a module program and check validation at the input screen, before calling the deletion program.
Regards
Datta

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

Publish Planning Book in Portal?

Similar Messages

Maybe you are looking for