Publish reports in the Application Server
If I make a report at the designer, how can I publish it at the Application Server, so I can call it through the browser?
thank you!
Does it matter if you have no ther choice ?
if you have to use 10g reports as reporting engine and forms 6i as "application" there will be no other chance.
I would try to avoid sending username/password@sid when calling the report, you can do this using "named configurations" using the cgicmd.dat file (see documentation)
Similar Messages
-
I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks. -
How to send the report output to the application server in a excel file
Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
SundeepDear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points * -
Error when publishing crystal report to the BO server
Hello All:
Has any one encountered the following error when saving a report to the BO server.
Unable to launch C:\program files\Business Objects\BusinessObjects Enterprise 11\win32_x86\plugins\desktop\CrystalEnterprise.Report\ReportAdd program to add report to the system .
....Would appreciate your help.
Thanks
ParmeshHi,
looks like a Bug here.
heck SAP Note - 1183390
Regards
-Seb. -
Integrating Dashboard / Publisher report into another application
Hi,
We do have a requirement in one of our applications, which is on Tomcat server. Where in we need to integrate an existing Dashboard and Publisher report to this application.
And it should not be through GO URL, where i need to specify the username & password and presentation services tries to create new session each time the page is called.
Hope some one helps in guiding us to achieve this.
Thanks in Advance
Message was edited by:
Rajendra PVVaidya,
Let me rephrase what you are looking for...
1. You dont want to embed the Webdynpro link into the template but would rather embed it as an object
2. You want to run the web dynpro when the WAD page is launched...
This is for 7.0 right..?
As for embedding the web dynpro as an object as opposed to a link ...? any reasons why - is it because you dont want users to see the link in the HTML source ...?
Even if they do - I am not sure how web dynpros work ( rusty on that front ) but then you should get a session ID when you launch the web dynpro right ..? which would obviate any reasons for the users to see the link
Possibly have it included as a button using Javascript ..?
If you want the webdynpro to launch when the WAD runs - then you could have an onload function in javascript that can do the same.... -
How to see the file at the application server
HI TO ALL SDNERS ,
THIS IS MY CODE WHERE TO CHECK THE DOWNLOADED FILE AT THE APPLICATION SERVER.IN TCODE AL11 I HAVE SEEN THERE IS NO FILE GETTING CREATED.WHEN TRANSFERRING THE SY-SUBRC VALUE IS ZERO.
Program Name : ZME11_BDC.
Title : PURCHASE INFORMATION RECORD LOAD PROGRAM
Program Objective : THIS PROGRAM READS IN THE PURCHASE
INFORMATION FILE. IT CREATES A BDC SESSION TO
USE TO LOAD THE PURCHASE INFORMATION RECORDS
INTO SAP using the ME11 Transaction.
REPORT ZME11_BDC no standard page heading MESSAGE-ID ZHNC line-size 55.
constants declaration
constants: c_x value 'X',
c_sess type apqi-groupid value 'zcustomer',
c_xd01 type tstc-tcode value 'ME11'.
DECLARING VARIABLES
DATA: V_MSG(255),
V_ERREC TYPE I,"NO OF FAILED RECORDS
V_LINES."NO OF RECORDS
FLAG DECLARATIONS
DATA: FG_DATA_EXIST VALUE 'X',"CHECK FOR DATA
FG_SESSION_OPEN VALUE ''.
STRUCTURES AND INTERNAL TABLE DECLARATIONS
TYPES :BEGIN OF TY_PIR,
LIFNR TYPE EINA-LIFNR,
MATNR TYPE EINA-MATNR,
EKORG TYPE EINE-EKORG,
WERKS TYPE EINE-WERKS,
VERKF TYPE EINA-VERKF,"sales person
TELF1 TYPE EINA-TELF1,"telephone
URZLA TYPE EINA-URZLA,"country
REGIO TYPE EINA-REGIO,"region
APLFZ(5),"plan deleivery time
EKGRP TYPE EINE-EKGRP,"purchase group
NORBM(13),
NETPR(13),
END OF TY_PIR.
DATA : IT_PIR TYPE TABLE OF TY_PIR,
WA_PIR LIKE LINE OF IT_PIR.
DATA: BEGIN OF IT_BDCDATA.
INCLUDE STRUCTURE BDCDATA.
DATA END OF IT_BDCDATA.
DATA : BEGIN OF IT_BDCMSG.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA END OF IT_BDCMSG.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : FNAME TYPE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = FNAME.
START OF SELECTION
START-OF-SELECTION.
PERFORM F_GET_DATA USING FNAME
CHANGING IT_PIR.
PERFORM F_GENERATE_DATASET USING FNAME
CHANGING IT_PIR WA_PIR.
*& Form F_GET_DATA
text
-->P_V_FNAME text
<--P_IT_PIR text
FORM F_GET_DATA USING P_FNAME LIKE FNAME
CHANGING P_IT_PIR LIKE IT_PIR.
DATA: LV_FILE TYPE STRING.
LV_FILE = FNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
FILETYPE = 'DAT'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = P_IT_PIR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_IT_PIR IS INITIAL.
FG_DATA_EXIST = ''.
ENDIF.
ENDFORM. " F_GET_DATA
*& Form F_GENERATE_DATASET
text
-->P_V_FNAME text
<--P_IT_PIR text
FORM F_GENERATE_DATASET USING P_V_FNAME LIKE FNAME
CHANGING P_IT_PIR LIKE IT_PIR
P_WA_PIR LIKE WA_PIR.
MESSAGE I001(ZHNC).
*OPENING FILE AT THE APPLICATION SERVER FOR WRITING
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC EQ 0.
MESSAGE I002(ZHNC).
LOOP AT P_IT_PIR INTO P_WA_PIR.
SPLIT P_WA_PIR AT '*' INTO P_WA_PIR-LIFNR
P_WA_PIR-MATNR
P_WA_PIR-EKORG
P_WA_PIR-WERKS
P_WA_PIR-VERKF
P_WA_PIR-TELF1
P_WA_PIR-URZLA
P_WA_PIR-REGIO
P_WA_PIR-APLFZ
P_WA_PIR-EKGRP
P_WA_PIR-NORBM.
*TRANSFER THE FILE FROM INTERNAL TABLE TO APPLICATION SERVER
MESSAGE I003(ZHNC).
TRANSFER P_WA_PIR TO FNAME.
ENDLOOP.
*CLOSING THE FILE AT THE APPLICATION SERVER
CLOSE DATASET FNAME.
ENDIF.Hello,
I made a similar program. You can have a look at it.
*& Form write_to_app_server
text
--> p1 text
<-- p2 text
FORM write_to_app_server.
To get filename
PERFORM get_filename.
To write into the application server
OPEN DATASET g_filename_with_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT <l_table> INTO <l_line>.
TRANSFER <l_line> TO g_filename_with_path.
ENDLOOP.
CLOSE DATASET g_filename_with_path.
ELSE.
CLOSE DATASET g_filename_with_path.
ENDIF.
To send mail
PERFORM send_mail.
ENDFORM. " write_to_app_server
*& Form get_filename
text
--> p1 text
<-- p2 text
FORM get_filename.
DATA : l_log_path TYPE filepath-pathintern
VALUE 'Y28M_DOWNLOADS_BACKGROUND' .
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
EXPORTING
client = sy-mandt
logical_path = l_log_path
operating_system = sy-opsys
file_name = p_fname
IMPORTING
file_name_with_path = g_filename_with_path
EXCEPTIONS
path_not_found = 1
missing_parameter = 2
operating_system_not_found = 3
file_system_not_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_filename
You may find it useful.
Regards,
Karuna. -
File from the Application server
Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev GuptaHi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB * &----
*& Example of Uploading tab delimited file *
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.
Regards
Anji -
Upload tab-delimited file from the application server to an internal table
Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
data(4096),
END OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
lifnr LIKE blf00-lifnr,
anred LIKE blfa1-anred,
bahns LIKE blfa1-bahns,
bbbnr LIKE blfa1-bbbnr,
bbsnr LIKE blfa1-bbsnr,
begru LIKE blfa1-begru,
brsch LIKE blfa1-brsch,
bubkz LIKE blfa1-bubkz,
datlt LIKE blfa1-datlt,
dtams LIKE blfa1-dtams,
dtaws LIKE blfa1-dtaws,
erdat LIKE lfa1-erdat,
ernam LIKE lfa1-ernam,
esrnr LIKE blfa1-esrnr,
konzs LIKE blfa1-konzs,
ktokk LIKE lfa1-ktokk,
kunnr LIKE blfa1-kunnr,
land1 LIKE blfa1-land1,
lnrza LIKE blfa1-lnrza,
loevm LIKE blfa1-loevm,
name1 LIKE blfa1-name1,
name2 LIKE blfa1-name2,
name3 LIKE blfa1-name3,
name4 LIKE blfa1-name4,
ort01 LIKE blfa1-ort01,
ort02 LIKE blfa1-ort02,
pfach LIKE blfa1-pfach,
pstl2 LIKE blfa1-pstl2,
pstlz LIKE blfa1-pstlz,
regio LIKE blfa1-regio,
sortl LIKE blfa1-sortl,
sperr LIKE blfa1-sperr,
sperm LIKE blfa1-sperm,
spras LIKE blfa1-spras,
stcd1 LIKE blfa1-stcd1,
stcd2 LIKE blfa1-stcd2,
stkza LIKE blfa1-stkza,
stkzu LIKE blfa1-stkzu,
stras LIKE blfa1-stras,
telbx LIKE blfa1-telbx,
telf1 LIKE blfa1-telf1,
telf2 LIKE blfa1-telf2,
telfx LIKE blfa1-telfx,
teltx LIKE blfa1-teltx,
telx1 LIKE blfa1-telx1,
xcpdk LIKE lfa1-xcpdk,
xzemp LIKE blfa1-xzemp,
vbund LIKE blfa1-vbund,
fiskn LIKE blfa1-fiskn,
stceg LIKE blfa1-stceg,
stkzn LIKE blfa1-stkzn,
sperq LIKE blfa1-sperq,
adrnr LIKE lfa1-adrnr,
mcod1 LIKE lfa1-mcod1,
mcod2 LIKE lfa1-mcod2,
mcod3 LIKE lfa1-mcod3,
gbort LIKE blfa1-gbort,
gbdat LIKE blfa1-gbdat,
sexkz LIKE blfa1-sexkz,
kraus LIKE blfa1-kraus,
revdb LIKE blfa1-revdb,
qssys LIKE blfa1-qssys,
ktock LIKE blfa1-ktock,
pfort LIKE blfa1-pfort,
werks LIKE blfa1-werks,
ltsna LIKE blfa1-ltsna,
werkr LIKE blfa1-werkr,
plkal LIKE lfa1-plkal,
duefl LIKE lfa1-duefl,
txjcd LIKE blfa1-txjcd,
sperz LIKE lfa1-sperz,
scacd LIKE blfa1-scacd,
sfrgr LIKE blfa1-sfrgr,
lzone LIKE blfa1-lzone,
xlfza LIKE lfa1-xlfza,
dlgrp LIKE blfa1-dlgrp,
fityp LIKE blfa1-fityp,
stcdt LIKE blfa1-stcdt,
regss LIKE blfa1-regss,
actss LIKE blfa1-actss,
stcd3 LIKE blfa1-stcd3,
stcd4 LIKE blfa1-stcd4,
ipisp LIKE blfa1-ipisp,
taxbs LIKE blfa1-taxbs,
profs LIKE blfa1-profs,
stgdl LIKE blfa1-stgdl,
emnfr LIKE blfa1-emnfr,
lfurl LIKE blfa1-lfurl,
j_1kfrepre LIKE blfa1-j_1kfrepre,
j_1kftbus LIKE blfa1-j_1kftbus,
j_1kftind LIKE blfa1-j_1kftind,
confs LIKE lfa1-confs,
updat LIKE lfa1-updat,
uptim LIKE lfa1-uptim,
nodel LIKE blfa1-nodel.
DATA: END OF vendor_file_x.
FIELD-SYMBOLS: <field>,
<field_1>.
DATA: delim TYPE x VALUE '09'.
DATA: fld_chk(4096),
last_char,
quote_1 TYPE i,
quote_2 TYPE i,
fld_lth TYPE i,
columns TYPE i,
field_end TYPE i,
outp_rec TYPE i,
extras(3) TYPE c VALUE '.,"',
mixed_no(14) TYPE c VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
APPEND data_tab.
ELSE.
EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
DO columns TIMES.
ASSIGN space TO <field>.
ASSIGN space TO <field_1>.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
SEARCH data_tab-data FOR delim.
IF sy-fdpos > 0.
field_end = sy-fdpos + 1.
ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
IF <field_1> CO mixed_no AND
<field_1> CA extras.
TRANSLATE <field_1> USING '" , '.
CONDENSE <field_1> NO-GAPS.
ENDIF.
* If first and last characters are '"', remove both.
fld_chk = <field_1>.
IF NOT fld_chk IS INITIAL.
fld_lth = strlen( fld_chk ) - 1.
MOVE fld_chk+fld_lth(1) TO last_char.
IF fld_chk(1) = '"' AND
last_char = '"'.
MOVE space TO fld_chk+fld_lth(1).
SHIFT fld_chk.
MOVE fld_chk TO <field_1>.
ENDIF. " for if fld_chk(1)=" & last_char="
ENDIF. " for if not fld_chk is initial
* Replace "" with "
DO.
IF fld_chk CS '""'.
quote_1 = sy-fdpos.
quote_2 = sy-fdpos + 1.
MOVE fld_chk+quote_2 TO fld_chk+quote_1.
ELSE.
MOVE fld_chk TO <field_1>.
EXIT.
ENDIF.
ENDDO.
<field> = <field_1>.
ELSE.
field_end = 1.
ENDIF.
SHIFT data_tab-data LEFT BY field_end PLACES.
ENDDO.
APPEND vendor_file_x.
CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR data_tab.
REFRESH data_tab.
FREE data_tab.
Rob -
Store XML Publisher report in the database
Hi all,
Is is possible to generate an XML Publisher report in the background and store the report as a blob in the database. I have an APEX application that needs to generate the report when the user clicks an 'Update' button. This report can then be accessed at a later date (via a hyper-link on another page) and will show the report that was stored on that date. Basically the report needs to be point in time.
Thanks
GrantHi,
you might have your reasons to want to store the entire report in the db as an object ... But wouldn't it be simpler to just add an extra DATE column to filter, and generate the report at runtime?
What if the data changes in the meantime?
Just, an idea ...
Grtz. -
Blank printout in report 6i from Application server oracle 9i
Hello,
3 days before our application server (oracle 9i for windows NT 1.0.2.0.0) hard disk crashed.
We have installed AS.
Now when user runs report from client pc and selects destination type as "cache" and submit query he can see the output. When he changes destination type as "printer" and give printer name (as installed on AS) in destination name and submit query the message "Report output was successfully printed out" comes but on printer only blank page is printed.
This happens for all laser printers installed on AS, but not for line(generic) printer.
On 2nd AS I have same printers as on 1st AS.There printouts are coming properly.
Please tell me what I have missed on while installing new AS.
Thanks
TusharIs outlook installed on the application server?
-
Error while extracting XML file from the application server
Hi ,
I am writing a XML file into the application server, after which when i try to extract the file to the local server using the report - RFASLDPC ,
the file is extracted, but with a '#' symbol at the first position.
Because of which the XML File does not open. But after i open the file in notepad and manually delete the '#' symbol and then reopen the file, it works fine.
Is there any way to remove the '#' symbol while extracting itself ??
Thanks in advance,
Vikas.Select the option "No Character Set Conversion" in stead of Code page 1100.
However, I still have troubles -> the downloaded xml file misses a space on several places. This causes errors too. -
Moving of flat file from the application server after upload.
Hi All,
I am uploading data from a flat file placed on the application server by a BDC program.
After the BDC has created the session i want to transfer the flat file from that folder to another folder on the application server by changing the name of the flatfile.
Can any one suggest the best way of doing this particular scenario?
Thanks in advance.
Regards
Satish Nair.Here is a sample program.
report zrich_0001.
data: d1 type localfile value '/usr/sap/TST/SYS/Data1.txt',
d2 type localfile value '/usr/sap/TST/SYS/Data2.txt'.
data: begin of itab occurs 0,
rec(20) type c,
end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
do.
read dataset d1 into wa.
if sy-subrc <> 0.
exit.
endif.
itab-rec = wa.
append itab.
enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Regards,
Rich Heilman -
Various ways to place a File in the Application Server.
Hi all,
What are the various ways to place a file in the application Server.
Please classify them as shown below.
1. Use of ABAP Code.
2. Without the use of ABAP code.
RegardsHi
<b>1. Use of ABAP Code.</b>
by writing code like this
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
f1(20),
f2(40),
f3(20),
end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
wa_tab2 type it_tab1,
w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
* PROGRAM_NAME = SYST-REPID
* DYNPRO_NUMBER = SYST-DYNNR
* FIELD_NAME = ' '
STATIC = 'X'
* MASK = ' '
CHANGING
file_name = file_nm
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '10'
i_end_row = '35'
tables
intern = it_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
when '002'.
wa_tab2-f1 = it_tab-value.
when '004'.
wa_tab2-f2 = it_tab-value.
when '008'.
wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
MESSAGE e001(zsd_mes).
EXIT.
ELSE.
*---Data is downloaded to the application server file path
LOOP AT it_tab2 INTO wa_tab2.
TRANSFER wa_tab2 TO p_file.
ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop.
Here is a pseudo code for what you are looking for-
OPEN DATASET P_FLPTH FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC eq 0.
LOOP AT LT_TAB INTO LS_TAB.
TRANSFER LS_TAB TO P_FLPTH.
ENDLOOP.
CLOSE DATASET P_FLPTH.
if sy-batch = 'X'.
write:/ 'File uploaded successfully'.
else.
message sXXX with 'File uploaded successfully'.
endif.
Else.
if sy-batch = 'X'.
write:/ 'Error in File upload'.
else.
message sxxx with 'Error in File upload'.
endif.
LEAVE PROGRAM.
ENDIF.
<b>2. Without the use of ABAP code.</b>
CG3Y -
Appl to Presentation server
<b>Reward if useful</b> -
ABEND while creating file in the application server
Dear All,
Please provide the solution for the following.
REPORT ZMAIN.
SELECT BKORM UP TO 1000
EXTRACT ext.
ENDSELECT
Imagine, now the extract file having 1000 Entries
Reading the above EXTRACT file
LOOP .
submit ZSUB.
ENDLOOP.
End OF Main Program----
REPORT ZSUB.
SELECT BKORM UPTO 500
EXTRACT ext.
ENDSELECT
Here for each submit of the ZSUB, it is creating one EXTRACT file in the application server. When it reaching to create 999, it is going for ABEND.
Can anybody provide the solution to avoid going for ABEND .
Is there any restriction to create extract files in the applciation server?
Thanks in advance.Instead of select/endselect, try to use a loop with internal tables..
There's no limit in the extracts you can do..
<removed by moderator>
Edited by: Thomas Zloch on Nov 2, 2010 5:20 PM - please do not ask for... -> Ok
Edited by: Roberto Vacca on Nov 2, 2010 5:29 PM -
Can we compare file contents of two files in the Application server?
Hi,
A file is generated daily to the application server. and i need to compare the generated file to the file generated on the previous day and prepare a report.
Can we compare file contents of two generated files present in the Application server?
If there is any alternative, please suggest.
regards
csyes we can compare if the app server is Unix.
cmp compare two binary files and report if different
cmp is silent if the files are the
same;
if they differ, the byte and line number at which the first
difference occurred is reported.
REPORT ZUNIX line-size 400
no standard page heading.
data: unixcom like rlgrap-filename.
unixcom = 'cmp file1 file2'.
data: begin of tabl occurs 500,
line(400),
end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
id 'TAB' field tabl[].
"if the files are different then you will some content in tabl
Regards
Viajy Babu Dudla
Maybe you are looking for
-
Nasty background echo & scratchy sound..HELP!
I recently upgraded to iTunes 7.1.1 and all my songs get this horrific background echo and scratchy distorted noise, its actually as bad as the screetching sound you get when nails travel over a chalkboard... HELP! (it happened once before when I upd
-
Anyone else notice this obscure bug in the calendar for the US Holidays?
Ok, Apple supplies this here: http://www.apple.com/downloads/macosx/calendars/usholidaycalendar.html In iCal on the Desktop, all is fine. On iPhone, or Touch, go to March 10, you will see there is a "dot" in the day, to mark there is an event, but th
-
Processing photos in the field taken with DSLR
I want to be able to take my DSLR (Nikon D800e) and iPad to a workshop and accomplish minor edits in the field. If i transfer RAW files to my iPad, will LR Mobile allow me to edit them?
-
I add a "Submit" button, but it doesn't work?
I added a Submit button to a form, but it does not show up once the form is distributed. It this one of the many issues with the "Submit: button?
-
-- As once your new thread looks like it has been resolved (even though it has not) no one seems to answer any more. Well the last thread was not answered, So I emailed a mod and looked like it might be OK BUT NO the profile is right but 1meg lower t