Publish Settings Flash .. stopping my fade effect on buttons??

Hi there ,
First of all BIG thank you to Kglad for help with my last question!
Secondly here is my NEW problem.... I have some buttons on my page that fade as you roll over them,
and they were working fine, UNTILL i changed my Publishing Settings>Flash >JPEG settings.. from 80 %
to 100%. But even if i changed it to 81% it still messes up the fade. When i say messes up i mean the fade
stops fading, and it just snaps from the pic to black.
any help would be great... i just cant figure this out...
-Bunnyface

ok sure, well the first file named help.fla is the example of it working fine,
you roll over it, and it fades out.. the second help2.fla is where THE ONLY THING
i have changed it the jpg quality is the publish settings > flash bit.
and that is the one that just flicks to black and wont fade.
Also to make it even stranger...... EVEN IF I CHANGE IT BACK, it still messes up !!
ARGH.
The two files can be seen here
http://www.adam.com.au/baker82/Help.fla
http://www.adam.com.au/baker82/Help2.fla
ahh i was trying upload them too but i keep getting this msg...
Unauthorized
There was an error, please check below
It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.

Similar Messages

  • Publish Settings - Flash Player 11 problem

    Yes correct I'm talking about Flash Player 11, thats what it says in Flash CS5 software.
    Whatever I do in Publish Setting, Flash software always returns option to be Flash Player 11, i don't get this. I choose Flash Player 8 and AS 2.0 and re-open Publish Settings it is again back on Flash Player 11 and AS 3.0.
    Why is it doing that ?
    First screenshot
    Second screenshot

    Try installing your Flash CS5 again

  • Publish settings so it will detect earlier versions, not just flash player 10.2!!

    How to i change the publish settings in cs4 (action script as2) to detect like flash player 7 or 8 not just 10. Cuz not alot of people have the newest flash player????? it has a spot where i can change it but only the decimals......10."0"."2".....the numbers in quotes are changeable but not "10"...any ideas??

    file/publish settings/flash and select the fp version you want.

  • 10.0.2 update breaks AIR publish settings option

    Since updating to 10.0.2, I have been unable to access the AIR settings (File -> AIR Settings) for my FLA file which is published as AIR 1.5.
    I get an JavaScript error pop up about "Apollo_OpenSettingsDialog.jsfl" every time I click on the menu option. The same thing happens when accessing the AIR settings through File -> Publish Settings -> Flash (tab) -> Player [Adobe AIR 1.5] (settings).
    This has rendered my previously working AIR project totally unusable as I can no longer make any changes to the AIR settings. Four months of work is now inaccessible.
    Any ideas how to resolve this?

    Phew! Just got it working again.
    Had to republish the .swf file and more importantly (I think) this also recreated the application descriptor file, both of which had been moved from their original locations. Once Flash could see these files I could access the AIR settings without the error message.
    I think I might report this as a bug as the pop up error panels should not be the way of alerting a user about an error - they're not very user-friendly!

  • Flash CC crashes after publishing iOS app + publish settings are not being saved to file

    I have two issues:
    1. Flash CC crashes every time I publish an iOS app
    2. My Publish Settings are not being saved
    1. Flash CC crashes every time I publish an iOS app
    Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
    2. My Publish Settings are not being saved
    Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
    Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
    Thanks!

    reset your preferences -
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  • Actionscript 2 and Flash Publish Settings

    Hi Everyone,
    I have posted a couple questions as of late and received fantastic support from other members (Thanks K-Glad).
    I do have what I'm assuming to be a basic question however I cannot find an answer for it.
    I added some login script to a page as listed below.
    stop();
    eval("$version");
    appname="mikesapp"
    loadVariablesNum("http://bars.bevinco.com/mike/newlogin.php", 0, "POST");
    //This verifys the users status and forwards them to the portion of the website they are authorized to access. Frame 100 = Regional Access, Frame 200 = Franchise Access, Frame 300 = Employee Access and Frame 400 = Denied Access and Back Button
    this.onEnterFrame = function () {
        if(_root.checklog == 100){
            _root.gotoAndStop(5);
        if(_root.checklog == 200){
            _root.gotoAndStop(10);
        if(_root.checklog == 300){
            _root.gotoAndStop(15);
        if(_root.checklog == 999){
            _root.gotoAndStop(20);
    My Question
    When testing this movie, I found that it was not moving to the section of the flash file that is relative to their "authorization level". I.E. I manually had my PHP echo back to flash, advising that REGIONAL ACCESS was used therefore it should be move this user to FRAME 5 of the file.
    I found that it was staying stuck on the first frame and not moving beyond the 1st frame which I thought had something to do with the stop(); that is listed at the top of the actionscript.
    However, when I changed the FLASH PUBLISH settings from Flash Player 8 to Flash Player 6, it works flawlessly.
    I attempted to publish using Flash 7 however it appears FLASH 6 is as high as I can go without loosing it's functionality.
    I'm curious WHY and will this limit our users from using the site if they have a lower version of Flash installed on their CPU?
    I have attached the project FLA file and the PHP file, being used on the server to manually tell this file that a REGIONAL has signed in or someone with "100" level status.
    As always, thanks in advance to anyone that has taken the time to read this post.
    Cheers,
    Mike

    checklog is a string (even though it looks like a number to you).  flash 6 allowed quite a bit more code sloppiness than later versions.  so, it's very common for users to find publishing for fp6 works, while publishing for fp's higher breaks their code.
    you should use:
    this.onEnterFrame = function () {
        if(_root.checklog == "100"){
    delete this.onEnterFrame
            _root.gotoAndStop(5);
        if(_root.checklog == "200"){
    delete this.onEnterFrame
            _root.gotoAndStop(10);
        if(_root.checklog == "300"){
    delete this.onEnterFrame
            _root.gotoAndStop(15);
        if(_root.checklog == "999"){
    delete this.onEnterFrame
            _root.gotoAndStop(20);

  • Flash CS5.5[Publish Settings]: How to include custom Metadata tags in swf?

    In Flash CS5, the 'Publish Settings' for the fla had an 'Export SWC' checkbox that took care of that.
    The option is missing. Why was it removed and how can  that be done in 5.5?

    Thanks sinious, but, it doesn't work.
    Let me elaborate on what I want to do:
    I'm trying to create a swf in Flash CS5.5, that's using a flex library (swc) that relies on Metadata tags (anotations).
    I need to use the metadata tags in my as3 code (in the fla), and They need to be compiled into the swf (by Flash CS5.5 compiler...).
    Although, when I load that swf, the metadata tags aren't compiled into it (I'm using describeType to check if tags are available in the swf).
    In flex, I would use the '-kepp-as3-metadata+=' compiler setting to do that, in Flash CS4 & CS5 I used the 'Export SWC' in the publish settings, but that's removed (WHY???).
    Checking XMP Metadata didn't change that, the tags are still not included in the compiled swf.
    Anyone?

  • Air 3.6 not available in publish settings after install - Flash CS6

    After installing Air 3.6 beta, Flash CS6 does not have Air 3.6 available in the publish settings - target. Highest available target is Air 3.4.
    System: Mac Book Pro-Retina, OS - X Lion.

    This is a mystery to me. On my Mac, I have Flash CS6 installed, and it told me at install time it was installing AIR3.5 at the same time. However, in the Flash Publish options, I only have AIR3.2 available?????
    I installed AIR 3.6 Beta, and it told me it was upgrading AIR3.5 to 3.6 huh ???? but still not available anywhere I can find it. I can't find it anywhere, and still only have AIR3.2 in the \Applications\Adobe Flash\CS6 directory, and in Publish settings.

  • Correct Flash CS6 iOS publish settings for iPhone?

    My programmer and I are trying to publish an iOS app for iPhone from Flash cs6 and are being rejected because "Your app did not run at iPhone resolution and/or 2x iPhone 3GS resolution when reviewed on iPad. The contents of your app are not displayed within the confines of the screen."
    In Flash CS6 iOS publish settings there is an option to export for iPad Only, iPhone Only, and for iPad and iPhone. iTunes Connect is sending us a screenshot that shows what we see when we publish a development IPA file using the iPad and iPhone setting. But the IPA file we submitted to them was published using the iPhone Only settings which when viewed on the iPad2 shows up inside the little iPhone 1X frame and can be expanded to 2X as well. I believe this is what they are saying is not happening when they do the same.
    Has anyone else who uses Flash had this issue? If so what stage size and what publish settings should be used when trying to create an iPhone only app?
    Thanks in advance, Patrick

    kishliver wrote:
    If so what stage size and what publish settings should be used when trying to create an iPhone only app?
    iPhone only app should be published with stage size:
    640x960 for portrait view
    960x640 for landscape view
    ... if the app are going to be fullscreen.

  • Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

    Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
    can any one help me bcoz i have to publish without air runtime.......

    Hi,
    This option is available when your publish target is set to AIR 3.6.
    You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
    Thanks!
    Mohan

  • [CS3] Flash buttons with fade effects.

    Well as the title says, i've got some buttons in Flash CS3,
    using AS 2 which when clicked changes the frame. The thing is that
    i want to add a fade effect to the text area AFTER the button was
    pressed. So for example:
    The user is reading the text, he presses one of the buttons
    (all of which change frames, in this case text) and the text fades
    away and the new text fades in.
    Well, i've designed the frames needed for this, so i've got
    10 frames before the frame the user will see for it to fade in and
    10 frames after it to fade out. What i havent figured out yet is
    how i'll make the script do that. I mean, i can make the script go
    forward one frame, starting the fade out effect, i can make it go
    to the frame i want but how will i do both.
    I've got 6 buttons and 6 corresponding texts.
    Does anyone have any ideas?
    Thank you in advance.
    P.S.: Any ideas welcome. I can change the frame layout.
    P.S.S.: Also forgot to mention that making layers for every
    combination is out of question....

    I've already had them placed each on their layer. I thought i
    might need mobility on the timeline.
    Let me see how much of this i understand...
    quote:
    which im assuming are MovieClip instances
    They're graphics but i can simply change them to be movie
    clips if it's the case.
    quote:
    do the same with your buttons on a seperate layer but you
    will only need one for them all
    I've lost you here....you're saying ill only need one AS
    reference?
    quote:
    for(var i=0; i<btns.length; i++) {
    Hmm... you're using the size of the array to set how many
    times the loop control will actually loop? Took me a bit to figure
    out what length an array could have
    quote:
    new Tween(current, '_alpha', Strong.easeOut, 100, 0, 10,
    false);
    new Tween(clips[this.id], '_alpha', Strong.easeOut, 0, 100,
    10, false);
    current = clips[this.id];
    //start the first clip transition 'in'
    current = clips[0];
    new Tween(clips[0], '_alpha', Strong.easeOut, 0, 100, 10,
    false);
    Ok i didnt get most of this but i'll have to check out the
    parameters for the Tween function.
    Actually i plan on going from a 50% alpha to a 100%, but
    that's just my choice.
    Thanks a lot and hope i dont become too annoying.
    P.S. I had a huge revelation at the end when i re-read the
    code and finally understood how this is going to work.

  • Publishing settings in Captivate 8, not the latest version of Flash player

    Hello all,
    It looks like the files I publish in Captivate 8 require me to get the latest version of Adobe Flash player.
    It seems like I can't set the flash player version in the publishing settings.
    From,
    Luke Low

    Hi Luke,
    For responsive project Swf publish is not possible so the Flash player option is not displayed, where as for Non-Responsive projects on the publish Dialog when you will click on SWF publish button you will get a flash player field. Use the field to select the target flash player for Swf playback.
    Thanks and Regards
    Shriyansh
    Adobe Engineering Team.

  • Flash Professional Help | Publish settings

    This question was posted in response to the following article: http://helpx.adobe.com/flash/using/publish-settings-cs5-5.html

    Flash CS6 uses the sound settings at the Publish Settings dialog even if Override Sound Settings is not selected and you set a sound file to use imported quality.

  • Background audio not adjusting after project is paused when published to Flash. Any suggestions?

    Hello,
    I'm working with:
    Captivate 6
    Mac OS X 10.8.2
    Flash Player is updated to most recent version
    My project contains background audio music set to adjust to slide audio. When I publish to Flash the background audio adjusts appropriately until I pause the video and then resume. Once the video resumes the background audio no longer adjusts to slide audio. So basically anytime a learner pauses the video and then resumes the background audio drowns the slide audio out. I've tried this with multiple projects and get the same result.
    When I publish in HTML5 it works fine. But I cannot use HTML5 because my project contains necessary rollover objects and captions, slide transitions, text animations, and other effects that HTML5 does not support.
    I've to remove and re-add the background audio, uninstall and reinstall Captivate, adjust the background and slide volume levels, uncheck loop audio, and pretty much any audio settings and publish settings I can think of.
    Can someone else with the same OS and Captivate version try and see if they encounter the same problem when publishing to Flash?
    Or does anyone have a solution/workaround?
    Thank You!

    Hi folks
    Sorry, I don't have a fix to offer. Only an observation. I'm rather surprised to see this many folks actually USING background audio. I say that, because I have facilitated hundreds of Captivate classes over the years. And there are lots of folks with Instructional Design background that attend. And in so many of the classes, when we reach the audio section and we cover how to use Background Audio, the same comment is made.
    The comment is that generally speaking, it is their opinion that from an Instructional Design standpoint, background music is a "no no" and should be avoided because it detracts from the learning objective.
    Perhaps the link below will help.
    Click here
    Cheers... Rick

  • Batch Changing SWF Publish Settings for Hundreds of FLAs?

    Hi, I've updated action script for a huge number of .flas to AS3 but forgot to change their Publish Settings to Flash Player 10 and AS3.  "MovieClip(this).stop" for example does not work in their swfs. 
    Is it possible to change these settings by batch processing all of the .flas at once?  (Through a Mac Automator droplet or text editing the .flas, etc...or ___?)
    Thanks

    You might be able to do this using JSFL, but I don't know exactly how. I'm looking at Extending Flash MX 2004 (which pretty much still covers JSFL today) and see the following methods.
    fl.browseForFileURL();
    fl.openDocument();
    fl.saveDocument();
    document.publishProfiles()
    document.publish();
    I'm not finding a way to change the publish settings yet, but I'm sure they are in there somewhere.

Maybe you are looking for

  • Dimensions and creation of Demension ID

    I have a lot of experience with OWB and today I noticed with the new Release 2 - that when you create multiple levels and hierarchies that the Dimension ID if a negative number - is this what others are seeing? I also notice with the Surrogate Key I

  • FocusListener not working for abstract button

    hi, FocusListener is not working for abstract button... Is there any other method which work similar to focusGained()... I think isFocusable() do that... Iam not sure about it.. Could anyone explain about it. It is needed very urgently. thanks in adv

  • SubTabLayout problem with PPR (bug?)

    Hello, I'm using JDev10.1.2 and found out that subTabLayout does not respond to the partial page rendering (PPR) as one would expect. In my example there is simple subtabs switching that does not renders both subtabs, only upper one is changing. Corr

  • WHAT IS TOTAL TAXES SET-OFF ?

    Dear All ,                      i m in display mode of a P.O here at item level in condition tab here JMOP =16% of 50,000 base price is 1,000INR & qty is 50,  is 8,000inr , JEC1 is 2 % of 8,000 is 160.00inr , & 1% of 160 is 80.00inr , but here total

  • ClickTAG

    Hi - I am pretty new to developing banner ads in Flash and I made one for a client, exported it in SWF and passed the file to his provider. Now his provider tells me I need to insert the correct script, that is: on (release) {     getURL(clickTag, "_