Publish the port forwarding rules and req. for customers to use the FiOS TV features they pay for!

Please read this thread and vote.
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/Publish-the-port-forwarding-rules-and-req...

Here they are, but - yes it would be great if Verizon published these, or at the very least linked to Actiontec's Website, where they publish the rules as well. or at least sticky some of these instructions here in the forums.
Instructional Video's and step by step detailed instructions for port forwarding
How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router (actiontec.com)
How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router  (actiontec.com)
PCWintech's guide to portforwarding for the actiontec MI424WR (Verizon Firmware)
PCWintech's guide to portforwarding for the Westell 327w DSL Modem
PortForward.com
I put my vote in.
EDIT: I Didn't realize you were asking for the port forwarding rules to the features, I should have read better. But yes I agree with that too.

Similar Messages

The back, forward, reload and stop buttons are greyed out, the address bar stays blank when I go to a website and firefox loads to a blank page, not my home page. There are 3 users on this computer and it only happens on one user.

Firefox loads to a blank page, not my home page. When I click on the home button it takes me to the home page. The back, forward, refresh and stop buttons are greyed out and not usable. The webpage I am on does not show up in the address bar. If I type something into the address bar, that address stays there no matter what page I go to next.

Just upgraded to v4. It did NOT fix the problem.

Neither Firefox or other web browser will access the net UNLESS I use the restore feature. The next day the problem occurs again and again I have to use the restore feature? It works on my laptop so not ISP problem do I have a trojan or something?

It seems that no browser will work. Firefox is my preferred browser but IE wont work either unless I use the restore function and then they work fine. However if I close my computer down for any reason they wont work and again I have to use the restore function. My email program works just fine (I use Agent) my ISP says there is no problem with my connection. My Firefox on my laptop works just fine and it uses the same connection as my desktop where the problem is.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]

The update screen freezes and will not let me use the beta

Whenever I try and open the Beta, it tries to add my previous firefox extensions into the beta. The screen freezes and when I close it, I cannot open the beta again. I uninstall it and try again and the same thing happens. I tried restarting my computer and nothing happened.

Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Two web servers cant use same port forwarding rule???

I have two web servers, each configured to respond to http reqests on port 80. I use NoIP service to map a domain name to my router. I create a port forwarding assignment for Server A by selecting the WebServer rule in the port forwarding rule table. All is fine. For Server B, I select the same Webserver rule and the router says there is a conflict.
I don't understand why. I think the router has enough information to route a http request for Server B by knowing its MAC address, which is different than Server A MAC address.
What am I missing here???
I was able to do this on my previous router with DD-WRT.....
So it would appear the way to resolve this is to assign a different port address to Server B???
grrrrrrrrrr I hate this router

You shouldn't have been able to do that on any router. You have to change the listening port of server 2, to 8080 or something like that, or make one a secure server and run it over 443
That is a known issue with port forwarding
Problem #8:
Same Port in Multiple Rules
There are some routers such as Linksys, D-Link and many others that do not do any checks if a port is already in another port forwarding rule. A port can only be forwarded to one Computer/IP at a time. So when there are multiples of the same port number the port forwarding rule will not work.
Here is an example.
As you can see port 2350 is in 2 rules. The 1st one points to a different IP than that of the 2nd rule. So the router will honor the 1st rule and the 2nd port forwarding rule to port 2350 fails.
By removing the 1st rule the 2nd one will now work.

Lync Edge and Proxy server public DNS records port forwarding rules

Hi All
I have question in regards to port forwarding rules for port 443 of simple url.
I have 4 public ip addresses.
1 edge server (4 nics , 3 running with different ip for sip, meet and dialin in DMZ network, 1 connected to internal local network).
1 proxy server (2 nics, 1 running with an ip which is in DMZ same as edge, and 1 connected to internal local network)
1 front end (lync 2013 standard installed.) connected to internal local network
1 office web apps . connected to internal local network
The question is that I am using 3 public ip addresses respectively on public DNS records for sip, meet and dialin(av) and using port 443 which has been set on edge server. So , I can use 3 DMZ network ip address on edge for sip, meet
and dialin (av) port forwarding from 3 public ip addresses as per in Microsoft document.
However, I also have a reverse proxy .Hence, my understanding is all public DNS records except SIP and port 443 should be pointed and port forwarded to reverse proxy ip address which is in DMZ network as it would redirect 443 and 80 to 4443 and 8080 to front
end.
Now the question has been clear, if simple URLs public DNS record and port forwarding rules for port 443 should be pointed to reverse proxy server, why they need to be set on each ip address and port number in Front end server topology to edge server?
If anyone knows, please give a help how to set it correct and what is supposed to be a correct configuration for a topology lync 2013

Hi George
Thanks for your reply. Attached is my topology which could make my it bit clear. You may see the public dns host record from the image. I set sip, meet, dialin , and owa 4 host records. The first 3 records are pointed to lync edge by doing a NAT with port
443 which is the same as per you said. However my understanding is they should be pointed to reverse proxy instead as for instance, I need meet.xxx.com with port 443 to be redirected to port 4443 through reverse proxy server to the front end. So when the external
customers who do not have lync client installed to their machine then we can shoot a lync meeting and send to them via outlook and they just need to click on join lync meeting link in the email to join in such a meeting based on IE. (Is my understanding correct?)
If lync web meeting works like so , then the question is why I need to set three SAME addresses in front end topology builder for edge and make them point to edge server instead?　
１. Access Edge service (SIP.XXX.COM) ---> I understand that it is used for external login lync front end.
2. Webconf edge server(Can I set to meet.xxx.com which is the same as simple URL that points to reverse proxy?) ----> If I can set this address to be the same as simple url address that points to reverse proxy, why should it need to be NATed to edge
instead? TO BE HONEST, if I HAVE tested, if I set this url as sip.xxx.com which means to use a single FQDN and ip address with port 444 and points simple url meet.xxx.com to reverse proxy, it will still work to join lync meeting sent by
outlook.I DO NOT REALLY UNDERSTAND WHAT this URL used for at this stage.
3. AV edge --- same as webconf
Regards
Wen Fei Cao

I am trying to forward certain email I get to my icloud email to another email address. I have added the unwanted senders email to rules and included where i would like the email to be forwarded

I am trying to forward a certain email I get to my icloud email to another email address. I have added the unwanted senders email to rules and included where i would like the email to be forwarded, however it doens't seem to be working as i also added a second rule for testing purposes with my other hotmail account
any help would be great

new account are created without a password, so asking for it is normal.
see http://thunderbirdtweaks.blogspot.com.au/2011/07/pssswords.html
Compare the passwords Thunderbird has for the other accounts and see if using the same one is what you need to do.

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

Which operating system?
If I recall, some features were not fully supported on XP.
Nancy O.

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

Bit Torrent port forwarding issue and DNS resoluti...

Good morning comunity!
Something odd has happened and I was hoping for some further guidance as I'm not sure what my next steps are.
Background
I have uTorrent running on a a machine that accesses a private RSS feed of torrents I am watching. The client sees a new file posting and automaticlly downloads the .torrent file then proceeds to download the main file itself.
When I had BT installed back on 23 Decemeber I set up port forwarding to this machine, using a static IP, and there were no connection issues.
What has happened
The previous evening as I was going to bed I checked the machine and the active torrents and all my files were sitting at 0 connections for connected seeds & peers. Meaning that uTorrent wasn't able to see anyone to conenct to.
My Troubleshooting
After seeing the above I began checking my connections and set up on the router as well as the machine. uTorrent has within its preferences a port checking utility for its assinged port and that was showing no open connection. I then logged in to my HH4 and verifed my port forwarding rules: nothing had changed there.
I removed and re-added the rules, turned off UPNP as well as turned it on with no success. And during the process of adding the rule back into the system I recieved an error stating that the port was already assigned even though at that moment there were no active assignments. So I changed port numbers and the issue went away.
I then went to chack the private torrent site and the page would not display. Then went to Down For Everyone Or Just Me to check the site as well and it was reported as being up. I loaded my VPN connection to bypass BT's network and I was able to visit the site. Logged back out and did a trace and the trace reported to route to the site. Changed my DNS to Google's DNS setting and was able to access the site.
Where I am now
My torrent machine is now running via the VPN but it's not the best connection in the world as changing the DNS there did not resolve the torrent connection issue.
Does anyone, especially you folkd familar with BT and their practices, have reccomendations as to what to try next or what the issue may be?

A lot of torrent sites are starting to be blocked. Its possible the site in question is being blocked by BT(They have no choice in this as its being forced onto them by a court order same for most of the other big ISPs). If its being blocked you would still be able to access via a VPN so long as thats not being blocked too. In terms of what you can do about it not much other than keep using the VPN.

Port Forwarding Rules

I had to do a factory reset on my MI424WR router while trying to get a security DVR accessable from the outside. I noticed that I have far fewer port forwarding rules now than before the reset. Does anyone have a list of rules I "should" have. Or maybe a config file I can load?
The issues now are that I lose connectivity with the net after the router runs for a couple hours. I also lose the ability to log into the router. Resetting the router clears it for a while, but then it dies again.

The rules that should be in the router should be applied by Verizon or added by the router automatically as time goes on. For your case, just re-create your rules and see if anything breaks.
For the router deal, consider disabling services like UPnP, the IGMP gateway, and the Firewall so the router runs in simplest form. Alternatively, see if you can narrow down the disconnects down to a specific device or with bad Coax if you have a coax connection back to the ONT. Failing that, consider asking for a new router from Verizon.
========
The first to bring me 1Gbps Fiber for $30/m wins!

RV180W loses port forwarding rules when switching WAN connections

We have a backup WAN connection in our office, but we switch this connection manually on our RV180W when the primary goes down. Our normal connection is ADSL with PPPoE, and the backup is Cable with DHCP.
However, we also have some port forwarding rules for our VoIP PBX (UDP port 5060) as well as SSH, and these rules seem to stop working completely when we switch our WAN connection to our cable connection. We can still surf the web from our workstations, but our incoming phone calls and SSH connections all cease to work completely. The problem does not persist after we've switched back to our normal ADSL connection.
This behaviour is completely bizarre and suggests that there's some kind of bug in the Cisco RV180W.

helm,
I'm sorry, I wasn't clear which IP address renewal I am speaking about.
I believe that the problem is caused when the router renews the WHS's local IP address (192.168...). My WAN IP address remains unchanged througout the tests I performed and the problems I experienced.
The very act of changing the local clients' lease time in the router's configuration causes the forwarding to be lost immediately. (I am gusessing that when the lease time is changed, the router immediately renews the lease and begins a new countdown.)
(In fact, I might go as far as to say it is a bug in the firmware, but I haven't done enough testing to nail it down.)

Port Forwarding Rule Added Via UPnP

14:24:13, 27 May.
(2110048.260000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:23:34, 27 May.
(2110008.940000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:22:53, 27 May.
(2109967.800000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:22:10, 27 May.
(2109925.160000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:21:37, 27 May.
(2109892.130000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:21:06, 27 May.
(2109861.170000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
14:20:26, 27 May.
(2109820.740000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->57902, internal ports: 57902, internal client: 192.168.1.65
Hi guys, would anyone be able to tell me what the above messages in my HH3's log mean? My connection has been fine but I would like to know why this is happening every few seconds.
At first I thought it was because of a certain program I was using but it happens even when this program isn't running so I just don't know!! Any help is appreciated.
EDIT: So I'm guessing it's something to do with having UPnP turned on. The reason I'm asking is because I've seen other people's logs and they aren't filled with this message.

Thanks, TommyBobbins.
I will turn off UPnP and see what happens.
I checked the logs again my computer has a lease of 192.168.1.64 - this IP address is also showing the same error in the logs. I suspect the other IP address, ending in 65 is my Dad's computer. He uses Windows and I use Mac.
I'll keep you posted.
EDIT: Just turned off UPnP and that was OK. I checked a program called uTorrent and it says the incoming TCP port (54488) is working.....I find this strange as I have portforwarding turned off... :s
Any ideas?
EDIT AGAIN:
Just wanted to add this in:
18:54:38, 27 May.
(2126273.250000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->52503, internal ports: 52503, internal client: 192.168.1.65
18:53:53, 27 May.
(2126228.130000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->52503, internal ports: 52503, internal client: 192.168.1.65
18:53:20, 27 May.
(2126194.690000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->52503, internal ports: 52503, internal client: 192.168.1.65
20:34:34, 27 May.
(2132268.320000) Port forwarding rule added via UPnP. protocol: UDP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
20:34:31, 27 May.
(2132266.240000) Port forwarding rule deleted via UPnP. protocol: UDP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
20:34:29, 27 May.
(2132264.190000) Port forwarding rule added via UPnP. protocol: TCP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
20:34:27, 27 May.
(2132262.050000) Port forwarding rule deleted via UPnP. protocol: TCP, external ports: any->54488, internal ports: 54488, internal client: 192.168.1.64
As you can see it happens on different ports and UDP and TCP ports....
Hasn't happened in the 20mins or so I've had UPnP turned off. Still, I am curious as to what causes this.

Time Capsule: Port Forwarding Issue and DHCP with Westell 6100g Modem

Ok two issues as of right now, but more down the road i think... Anyways, number one, i would like to be able to backup my computer using time machine and my time capsule.. Right now it works properly when inside the local network, was wondering if there was a way to backup when outside the network... i travel a lot and always have my macbook pro with me.. Also, i have a USB hard drive connected to the usb port on back of time capsule but its not showing up anywhere... is that only for printers??? that's not such a big deal, but would be nice to have access to that hard drive from multiple computers... OK so part two of my issues is, i have a WESTELL 6100g modem for DSL verizon service, which is crappy, but that's besides the point, it is a modem/router, so i have the time capsule connected directly to that westell.. the westell only has one Ethernet port, so that's wired to time capsule and then my computers are connected wirelessly and wired through the capsule. It seems that the westell is distributing the IP's and is controlling the port forwarding and what not.. I have tried a few things to give control to the time capsule but that didnt work.. i followed these directions on the web page http://www.dslreports.com/faq/vz/4._Hardware#13600 but it didnt work properly, i couldn't log onto the web at all.. Maybe im doing something wrong.... Anyways, what i really want to do is control everything that the westell is controlling right now with the time capsule... i want to give out IP's and also control port forwarding with the capsule.. Any way of getting that accomplished would be AWESOME... I'm somewhat intelligent when it comes to computers so i should understand everything you are talking about... please help!!!

wattabing wrote:
Ok two issues as of right now, but more down the road i think... Anyways, number one, i would like to be able to backup my computer using time machine and my time capsule.. Right now it works properly when inside the local network, was wondering if there was a way to backup when outside the network... i travel a lot and always have my macbook pro with me.
If you have Back to my Mac (available online service from Apple's MobileMe), then you can perform the following actions with your Time Capsule remotely,
1. Remote disk access to both the Time Capsule disk and a compatible disk connected via the Time Capsule's USB ports.
2. Remote configuration.
Also, i have a USB hard drive connected to the usb port on back of time capsule but its not showing up anywhere... is that only for printers???
Printer, hub, or compatible disk.
http://support.apple.com/kb/HT2421
Anyway, it could be a setup issue for you, assuming you have Back to my Mac (MobileMe) then the procedure for Time Capsule services is shown in the following Apple support kb
http://support.apple.com/kb/HT3486
and for USB disk please see the following Apple support kb
http://support.apple.com/kb/ht2426

Publish the port forwarding rules and req. for customers to use the FiOS TV features they pay for!

Similar Messages

Maybe you are looking for