Publish to Android device doesn't work

Flash CS6 - I'm trying to Publish content to Android device to install and open it there, I receive error everytime I try that says your phone is connected. First question cross my mind, why does it assume I have a Phone ? I connected ASUS Android 4.0 tablet to PC and doesn't recognize it...
Any ideas how to make this work ?

Hello,
Could you please follow instructions outlines in this article?
http://helpx.adobe.com/content/help/en/flash/using/publishing-air-android-applications.htm l
Let us know if you still have problems publishing Flash content to Android.
Thanks,
Suhas Yogin

Similar Messages

Tethering internet from my Android device doesn't work

Hi Everybody!
I'm trying to tether internet from my phone, everything seems to be OK, you can see it in this screeshot :
Do not post full size images -- Inxsible
IP address, DNS server are ok, but I don't have internet , what am I missing? I even recompile my kernel follow Geentoo wiki
any Idea or hint?
thanks!
Last edited by Inxsible (2013-05-03 22:07:52)

Do you know that this is an Arch problem? I suspect it is an Android problem, in all likeliness, a problem deliberately created by your phone carrier.
Be that as it may, does tether work on other OSes? Also, to get my Android to tether (both USB and wireless), I had to change the iptables on the phone to allow it to route correctly from the wlan to the 3g network:
# uname -a
Linux localhost 2.6.37.6-cyanogenmod+ #6 PREEMPT Mon Jan 23 23:31:52 PST 2012 armv7l GNU/Linux
# cat /data/local/userinit.sh
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -P FORWARD ACCEPT
iptables -t nat -A POSTROUTING -o rmnet0 -j MASQUERADE
Make a file like that, reboot, and check your iptables config. [In case it is not obvious, I am talking of the phone itself]
Last edited by ewaller (2013-05-03 21:08:50)

Flash CC publish to Nexus 4 doesn't work

Hi all,
I'm a newbie when it comes to mobile development, but I have a lot of experience with AIR for desktop.
I have a Google Nexus 4 and cannot get Flash CC to publish to it for a simple test. First I found that Flash CC couldn't find the device at all because it lacked the necessary drivers, and the ones provided with Flash CC were not accepted by Windows 7. I was able to find what seems to be the correct driver (Universal ADB driver) online here: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
After installing that, Flash CC was able to list my device in the AIR publish settings. I have USB debugging enabled on my Nexus 4, but when I go to publish it just gets to an indertimined progress bar that says "Publishing..." and never completes. If I cancel it, Flash CC freezes and must be killed.
The publish settings I'm using are:
AIR 3.6 for Android
Android deployment type: Debug - Default
AIR runtime: Get AIR runtime from: Google Play (I have AIR installed on the Nexus 4)
After publishing
- Install application on the connected Android device
- - Launch application on the connected Android device
- - - [Presumably my device selected... it's a string of random characters]
On the Nexus 4 I have turned on Developer options > USB debugging, I have it plugged in and on.
Am I missing something?
-Aaron

Meanwhile, could you please try restarting your machine once, just to ensure an in memory older adb is not in use.
So, was a newer driver supposed to be installed by downloading the latest SDK? What driver should be installed?
I simply opened Windows 7 Device Manager and did an 'Update Driver' and 'Search Automatically' and it found an update and installed it, asked me to reboot and next reboot it worked.
I've tried to update the driver automatically and it simply says it's up to date. I've also tried to use the drivers shipped with Flash CC and Windows didn't recognize them as valid drivers at all.
What driver did you initially install?
-A

[solved] My udev rule for my Android phone doesn't work, not sure why

I have the HTC G1 Android phone and I'm trying to get a udev rule working for it. This is my rule ...
/etc/udev/rules.d/50-android.rules
SUBSYSTEM=="usb_device", SYSFS{idVendor}=="0bb4", MODE="0666", NAME=="android"
... but when I connect my phone, /dev/android doesn't appear. 0bb4 is correct ...
/sys/class/usb_device/usbdev5.2/device/idVendor
0bb4
... so what's going on?
Last edited by synthead (2008-11-28 15:19:09)

There is, but I can already use it that way. I'm learning how to code in java so I can develop applications for it. There's a feature in the SDK where you can install and run your code on your Android device fairly seamlessly. You literally hit "Run" and a few moments later, your phone's going to town. But for this to work, permissions need to be set (0666). But my udev rule does nothing and I dont understand why.
This is where I got this information: http://code.google.com/android/intro/de … cehardware

[SOLVED]mounting cdrom and usb devices doesn't work

Hello,
i have trouble mounting my usb devices. automount doesn't work and i can't mount them manually even as a superuser. here's the output of mount command:
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
i can mount cdrom manually but i can't do the same for my usb stick and external hard drives. it always complains about the above regardless of the filesystem. my devices are working under windows and other linuxes so i know hardware is not the problem.
i'm using lxde with pcmanfm.
if you need any other files just ask.
thanks
Last edited by the gray (2009-03-16 20:15:18)

above was the error when i tried to mount any usb device with "mount -t <type> /dev/sdc /media/mountpoint". and i couldn't mount any usb device as root from console. when i tried to mount devices using pcmanfm it just popped some empty dialogs and i couldn't find any mention of "IsCallerPriviliged failed" error so i (wrongly) presumed it wasn't that. i did try some of the other fixes mentioned in the forum with no success. but adding exec ck-launch-session startkde to my .xinitrc fixed the issue
thanks again
Last edited by the gray (2009-03-16 20:17:53)

APP created with Air for Android but doesn't work on the emulator for test - Help!

When I create an application using Flash CS5.5>>> AIR FOR ANDROID.
After creating a test page I go to publish settings and send the app on Emulator RELEASE ... The APP is loaded correctly but as soon as you start the emulator, give this error "The application XXnameappXX (process air.XXnameappXX) has stopped unexpectedly. Please try again" Help Please!

Ok i've find this before "Adobe Flash CS5/AIK2.5/runtimes/air/android/emulator/Runtime.apk" and install it on android emulator! Now works all i hope! Thanks for your answer!

Auto-mounting USB storage devices doesn't work

Hi all,
I have some problems with the auto-mounting of USB storage devices. I already installed udisks and ntfs-3g.
When I connect the external device (it's an external hard disk WD My Passport 500GB, but I have the same problem with a SanDisk USB stick 8GB) the auto-mount doesn't work. I see a shorcut in the left panel of Thunar but if I try to use it Thunar crash without any message error.
I try with the manual mount and it works, but the left panel of Thunar continue to have the same problem.
In the italian Arch forum a friend suggest me to open Thunar from bash and close it. If I do it I receive this error log:
$ thunar
thunar: symbol lookup error: /usr/lib/libstdc++.so.6: undefined symbol: _ZNSt14error_categoryD2Ev, version GLIBCXX_3.4.15
and this is the reply of dmesg command:
[ 340.826768] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 341.591397] Initializing USB Mass Storage driver...
[ 341.592166] scsi6 : usb-storage 1-1:1.0
[ 341.592345] usbcore: registered new interface driver usb-storage
[ 341.592349] USB Mass Storage support registered.
[ 341.599805] usbcore: registered new interface driver uas
[ 342.591094] scsi 6:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
[ 342.591474] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 342.592845] scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
[ 342.593048] scsi 6:0:0:1: Attached scsi generic sg2 type 5
[ 342.594050] sd 6:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 342.594814] scsi 6:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[ 342.595141] scsi 6:0:0:2: Attached scsi generic sg3 type 13
[ 342.596546] sd 6:0:0:0: [sdb] Write Protect is off
[ 342.596553] sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
[ 342.596557] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 342.599163] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 342.618228] sdb: sdb1
[ 342.621039] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 342.621046] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 342.665174] sr0: scsi3-mmc drive: 51x/51x caddy
[ 342.665180] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 342.665447] sr 6:0:0:1: Attached scsi CD-ROM sr0
[ 342.665654] ses 6:0:0:2: Attached Enclosure device
[ 349.105348] [b]Thunar[996]: segfault at 0 ip b6de1660 sp bfe586f4 error 4 in libglib-2.0.so.0.2800.8[b6d6f000+ed000][/b]
Do you have any suggestion?
Thank you very much,
Gianluca

Are you using [testing]? Partially updated system?
The error looks like you have a different version of gcc-libs / glibc than the app was built against.
Last edited by Mr.Elendig (2011-06-20 19:16:33)

Android, backspace doesn't work properly in a flash.text.TextField

Hello,
I have a bug on my Nexus 5 Android 4.4 Air 4.0.
when I scroll the text in the textField and I select the text (in my example near "subclass" word), the TextField get focus, if I put on the backspace key, the character deleted is the previous character the first time, and if I put again on the backspace key, the caracter deleted is the first character and not the previous character.
package{
import flash.text.TextField;
import flash.display.Sprite;
import flash.events.Event;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
public class Main extends Sprite {
private var myTextField:TextField = new TextField();
public function Main() {
    stage.scaleMode = StageScaleMode.NO_SCALE;
    stage.align = StageAlign.TOP_LEFT;
    addEventListener(Event.ADDED_TO_STAGE, init);
private function init(event:Event):void {
    myTextField.type="input";
    myTextField.text="The TextField class is used to create display objects for text display and input. You can give a text field an instance name in the Property inspector and use the methods and properties of the TextField class to manipulate it with ActionScript. TextField instance names are displayed in the Movie Explorer and in the Insert Target Path dialog box in the Actions panel.\nTo create a text field dynamically, use the TextField() constructor.\n\nThe methods of the TextField class let you set, select, and manipulate text in a dynamic or input text field that you create during authoring or at runtime.\n\nActionScript provides several ways to format your text at runtime. The TextFormat class lets you set character and paragraph formatting for TextField objects. You can apply Cascading Style Sheets (CSS) styles to text fields by using the TextField.styleSheet property and the StyleSheet class. You can use CSS to style built-in HTML tags, define new formatting tags, or apply styles. You can assign HTML formatted text, which optionally uses CSS styles, directly to a text field. HTML text that you assign to a text field can contain embedded media (movie clips, SWF files, GIF files, PNG files, and JPEG files). The text wraps around the embedded media in the same way that a web browser wraps text around media embedded in an HTML document.\n\nFlash Player supports a subset of HTML tags that you can use to format text. See the list of supported HTML tags in the description of the htmlText property.\n\nView the examples\n\nMore examples\n\nModifying the text field contents\nDisplaying HTML text\nUsing images in text fields\nScrolling text in a text field\nSelecting and manipulating text\nCapturing text input\nRestricting text input\nFormatting text\nWorking with static text\nTextField Example: Newspaper-style text formatting\nLearn more\n\nUse native features with a soft keyboard\nDisplay programming\nBasics of display programming\nCore display classes\nChoosing a DisplayObject subclass\nBasics of Working with text\nUsing the TextField class\nDisplaying text\nAdvanced text rendering\nRelated API Elements\n\nflash.text.TextFormat\nflash.text.StyleSheet\nhtmlText\n\nPublic Properties\n Show Inherited Public Properties\n   Property Defined By\n      alwaysShowSelection : Boolean\nWhen set to true and the text field is not in focus, Flash Player highlights the selection in the text field in gray.\nTextField\n      antiAliasType : String\nThe type of anti-aliasing used for this text field.\nTextField\n      autoSize : String\nControls automatic sizing and alignment of text fields.\nTextField\n      background : Boolean\nSpecifies whether the text field has a background fill.\nTextField\n      backgroundColor : uint\nThe color of the text field background.\nTextField\n      border : Boolean\nSpecifies whether the text field has a border.\nTextField\n      borderColor : uint\nThe color of the text field border.\nTextField\n      bottomScrollV : int\n[read-only] An integer (1-based index) that indicates the bottommost line that is currently visible in the specified text field.\nTextField\n      caretIndex : int\n[read-only] The index of the insertion point (caret) position.\nTextField\n      condenseWhite : Boolean\nA Boolean value that specifies whether extra white space (spaces, line breaks, and so on) in a text field with HTML text is removed.\nTextField\n      defaultTextFormat : flash.text:TextFormat\nSpecifies the format applied to newly inserted text, such as text entered by a user or text inserted with the replaceSelectedText() method.\nTextField\n      displayAsPassword : Boolean\nSpecifies whether the text field is a password text field.\nTextField\n      embedFonts : Boolean\nSpecifies whether to render by using embedded font outlines.\nTextField\n      gridFitType : String\nThe type of grid fitting used for this text field.\nTextField\n      htmlText : String\nContains the HTML representation of the text field contents.\nTextField\n      length : int\n[read-only] The number of characters in a text field.\nTextField\n      maxChars : int\nThe maximum number of characters that the text field can contain, as entered by a user.\nTextField\n      maxScrollH : int\n[read-only] The maximum value of scrollH.\nTextField\n      maxScrollV : int\n[read-only] The maximum value of scrollV.\nTextField\n      mouseWheelEnabled : Boolean\nA Boolean value that indicates whether Flash Player automatically scrolls multiline text fields when the user clicks a text field and rolls the mouse wheel.\nTextField\n      multiline : Boolean\nIndicates whether field is a multiline text field.\nTextField\n      numLines : int\n[read-only] Defines the number of text lines in a multiline text field.\nTextField\n      restrict : String\nIndicates the set of characters that a user can enter into the text field.\nTextField\n      scrollH : int\nThe current horizontal scrolling position.\nTextField\n      scrollV : int\nThe vertical position of text in a text field.\nTextField\n      selectable : Boolean\nA Boolean value that indicates whether the text field is selectable.\nTextField\n      selectionBeginIndex : int\n[read-only] The zero-based character index value of the first character in the current selection.\nTextField\n      selectionEndIndex : int\n[read-only] The zero-based character index value of the last character in the current selection.\nTextField\n      sharpness : Number\nThe sharpness of the glyph edges in this text field.\nTextField\n      styleSheet : StyleSheet\nAttaches a style sheet to the text field.\nTextField\n      text : String\nA string that is the current text in the text field.\nTextField\n      textColor : uint\nThe color of the text in a text field, in hexadecimal format.\nTextField\n      textHeight : Number\n[read-only] The height of the text in pixels.\nTextField\n      textInteractionMode : String\n[read-only] The interaction mode property, Default value is TextInteractionMode.NORMAL.\nTextField\n      textWidth : Number\n[read-only] The width of the text in pixels.\nTextField\n      thickness : Number\nThe thickness of the glyph edges in this text field.\nTextField\n      type : String\nThe type of the text field.\nTextField\n      useRichTextClipboard : Boolean\nSpecifies whether to copy and paste the text formatting along with the text.\nTextField\n      wordWrap : Boolean\nA Boolean value that indicates whether the text field has word wrap.\nTextField";
    myTextField.border=true;
    myTextField.width=myTextField.height=300;
    addChild(myTextField);
Thanks.

I have this bug on Galaxy Nexus Android 4.3, I don't have this bug on Galaxy S Android 2.3, the bug occurs with the new Google Keyboard 3.0
the app descriptor
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/4.0">

          
          <id>TextFieldFB</id>
          
          <filename>TextFieldFB</filename>
          
          <name>TextFieldFB</name>
          
          <versionNumber>0.0.1</versionNumber>
          
          
          
          
          
          
          
          
          
          <initialWindow>
                    
                    
                    <content>[Cette valeur sera remplacée par Flash Builder dans le fichier app.xml de sortie]</content>
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
        
        
        
        
        
        
        
        
        
        
                    
                    
                    
                    
          <autoOrients>true</autoOrients>
        <fullScreen>false</fullScreen>
        <visible>true</visible>
    </initialWindow>
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
                    
                    
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                    
          
    
          
                    
                    
        
                    
          
          
          
          
          
          
          
          
    
    
              
        
        
        
    
          
<android>
        <manifestAdditions><![CDATA[
                              <manifest android:installLocation="auto">
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                                  
                              </manifest>
                    ]]></manifestAdditions>
    </android>
    <iPhone>
        <InfoAdditions><![CDATA[
                              <key>UIDeviceFamily</key>
                              <array>
                                        <string>1</string>
                                        <string>2</string>
                              </array>
                    ]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>
</application>

Live Encoder for Mac + Shure XLR- USB device doesn't work

I use Shure X2u to convert external microphone signal to USB audio device. MacOS sees Shure as input device in Sound Preferences. If I set "Shure Digital" as input device Garage Band records my external microphone. If I run FlashMediaLiveEncoder it records only laptop internal microphone.
Is there a way of recording sound of external audio input device?

It is a Cowon D2. As said, it is pretty inconsistent and sometimes works, sometimes I just get the "Preparing ..." message when copying.
What worries me most is that I can't see the MP3 player anymore after this has happened. So the Mac must 'cache' or remember something about the device; a PC doesn't have this problem.
So I should find a way to clear that memory or cache or mount table or whatever it is... As said, currently the only solution is the re-install the player's firmware, or use a PC

Just published site - navigation bar doesn't work

Hi Everyone -
I'm brand new here and apologize if I'm about to ask something that's been asked and answered a hundred times. I looked through the questions and found instances where navigation bars are missing once the site has been published, but my issue is different (though the solution may be the same - I don't know).
I just published my iWeb site (www.thewordwise.com) and found a couple issues (my site doesn't fill the screen, but I'll wank about that later). My navigation bar appears properly at the top, but does not work at all. Only the Welcome page is accessible.
In looking through the various missing navigation bar questions posed here, I would hazard a guess that not all of my pages have been properly uploaded to the hosting site I'm using (godaddy) and that the solution may be to use a third party FTP folder? This is unfortunately Greek to me.
Any assistance would be enormously appreciated. Thank you.

I think you'll find that your navigation menu is not working as your image is overlapping with it - The Word Wise image. An image only has to be overlapping a little and it will then not work. Move the image down so that it is clear of the nav menu and it should then work.
As for your site name - the second is your site name in iWeb - you named your site that and you can change it so that it is not as long - do this in iWeb and then republish your site.

USB external mass storage devices doesn't work.

Hey guys,
I couldn't find any answer to my problem so I hope you can help me...
I have USB Seagate external USB drive which was working perfectly with my mac until I installed VMware. The thing is that since first time I installed XP on VMware and unmounted my external drive from OSx and mounted in for virtual machine the drive is no longer visible in Mac OS no matter if I unmount it from virtual machine, plug/unplug from port, turn off VMware, restart macbook in any possible sequence combination. However I can use it easily in virtual machine or on other PC. Problem is not files type related, because I've already checked it, what is more I didn't format the drive and earlier it worked.
What is more now I can't even see my pendrive despite the fact that both Seagate drive and pendrives are visible in system profiler. My USB mouse works perfectly so problem apparently is only with data storage devices.
During the installation an error pop up concerning "IOUSBMassStorage" file but after installation of VMware everything was working until I mounted in on virtual machine.
EDIT: I almost forgot to add that I uninstalled VMware and the problem still occurs.
Thanks for any help in advance.
Message was edited by: bheliom

I was trying to install update USBFamilly and now also VMware again and in both cases I get error saying that USBMassStorageClass was installed improperly.
I found few topics about this file on the internet that it controls exactly what I have problem with but couldn't find solution for how to reinstll this file.
Any ideas ?

Form_URN doesn't work for the first few times on android, and doesn't work completely on iphone.

Dear All,
I used approval workflow in my workflow and modified the content in the email sent by system to users. I used hyperlink to setup a clickable letter to Current Task : Form_URN. (everything under workflow 2010 and SP 2013 online )
After that, I initiated some new items in the list and the email got sent to users. On android phone, I was able to click on the link created by current task: Form_URN and it leads me to log in, after I log in it leads me to a black website of my sharepoint
site. I noticed the URL is correct (which means if I use the url on my computer, it will lead me to the place I want it to be, which is the approve or reject the workflow) after a few times of sending request, suddenly it worked on my android phone.
(no idea what happened). But then I did the same test on iphone, it kept leading me to the blank site, and never worked in the end, the link is still correct. Is it a browser thing? Is it possible to fix it?
Thanks
Timothy Liu

You can only turn it into your local Apple store to be recycled for a 10% discount towards the purchase of a new one. That's it though.
B-rock

RTMP works on Android, but doesn't work on iOS!

Hi guys,
I'm really stuck, don't know why recently my app can't play some rtmp streamers, it can only work with some others. Previously there was no issue.
Could you see the below peice of code. This one works fine on PC and Android, but not on iOS.
import flash.events.*;
import flash.media.Video;
import flash.net.*;
var client:MediaClient = new MediaClient();
var connection:NetConnection = new NetConnection();
connection.client = client;
// connection.proxyType = "best";
connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
connection.connect("rtmp://66.160.142.198/live");
var stream:NetStream;
var video:Video = new Video(480, 320);
addChild(video);
function netStatusHandler(evt:NetStatusEvent):void
   switch(evt.info.code)
       case "NetConnection.Connect.Success":
           stream = new NetStream(connection);
           stream.client = client;
           stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
           stream.addEventListener(AsyncErrorEvent.ASYNC_ERROR, asyncErrorHandler);
           stream.play("vtv11");
           video.attachNetStream(stream);
           break;
       default:
           // output evt.info.code on screen
           break;
function securityErrorHandler(evt:SecurityErrorEvent):void
   // output evt.toString() on screen
function asyncErrorHandler(evt:AsyncErrorEvent):void
   // output evt.toString() on screen
and here is MediaClient class:
package
   public class MediaClient
       public function onBWDone(...args):void
           // ouput args
       public function onFI(...args):void
           // ouput args
       public function onMetaData(...args):void
           // ouput args
       public function close(...args):void
           // ouput args
I tried to output some debug text, I saw it netconnecton was connected, the server invoked onFI() every about 2 seconds, but there's no video and sound. (tested on iOS 4, both 3G and wifi).
I also tried alot of options of the video, netstream and netconnection classes and tried with OSMF, but can't get it work. (I'm using AIR 3.0 sdk).
Thank you so much!

Can you post what type of stream you're trying to view?
There are compatibility issues with H.264 and iOS over RTMP/RTMFP. If your video stream is H.264, then you won't be able to view it on iOS over RTMP. In that case, though, you *should* still be able to hear the audio (depending on what audio codec you're using).

Bluetooth - Send to Device Doesn't work after upgrade to Mavericks

Hi there,
I have been trying to launch my Bluetooth - Send To Device option, the "File Browser" window would just flash and then dissappear. This has been the case after I upgraded to Mavericks.
Any fix around?
Also I have been facing this File Browser "Flash and Dissappear" kind of issue on Photoshop and other Apps too when I try a "Save As" or "Open" etc.
Working on Mavericks has become a real task.
A little help would be Appreciated.
Thanks and Cheers!
Sigmund Quadros

Hello Sigmund,
I found an article with steps you can take when you have issues with a Bluetooth connection. I recommend following the steps in the section titled "Top troubleshooting tips" in the following article (step 9 specifically stands out to me for the issue you described):
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

Pci device doesn't work till reboot

Hello, I'm new to these boards so please forgive any errors in posting.
i use my computer as a pvr. The problem is if i shutdown my computer for more then a minute the pci slot hvr-1600 stops working. If i reboot it comes right back up working again. Tried the card in another computer no problems worked fine. Besides this issue computer is completely stable not one bsod or lockup...so far heheh
Intel Core i7-2600K Sandy Bridge 3.4GHz
MSI P67A-GD65 (B3) Bios 1.8
hec Zephyr MX-750 750W
Win 7 64 SP1
1 X Kingston HyperX 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Model KHX1600C9D3K2/8GX
1 X ASUS ENGTX560 TI DCII/2DI/1GD5 GeForce GTX 560 Ti (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16
1 x SAMSUNG Spinpoint F1 HD103UJ 1TB 7200 RPM SATA 3.0Gb OS
1 x HITACHI Deskstar 7K1000 HDS721010KLA330 (0A35155) 1TB 7200 RPM SATA 3.0Gb Storage
1 x Hauppauge WinTV-HVR-1600 ATSC/ClearQAM/NTSC TV Tuner MC-Kit 1183 PCI
1 x LITE-ON Blu-ray Burner with 3D Playback SATA iHBS212
No over-clocking has been done, stock cooler for now

Quote
The problem is if i shutdown my computer for more then a minute the pci slot hvr-1600 stops working.
I don't quite get that. When you say you shutdown your computer, do you mean you are switching your computer off?

Publish to Android device doesn't work

Similar Messages

Maybe you are looking for