Publish to MobileMe did not

I selected the images, defined the layout and format of the web page and selected the Publish to MobileMe button.
Aperture went through the motions of creating the images and web pages and then stopped - no upload to the iDisk carried out.
So I did the Export Web page process and copied the created web pages and Images to iDisk - Sites folder using Finder.
There might actually be a benefit in doing this process this way as I now have the Web structure to copy to CD etc for non web based distribution.

MMe doesn't exist.  You can still publish a blog created with iWeb to an FTP server BUT you can't have visitors add comments to the blog.  That feature was tied to the MMe servers and is no longer available.
A comment feature can be added to an iWeb site by using a 3rd party commenting service like Disqus: Disqus Comment in a Scrolling iFrame. The link takes you to an example of adding Disqus to a website.
With iWeb 2 you'll have to publish your site to a folder on your hard drive and upload the site folder and its external index.html file to the server with a 3rd party FTP client like Transmit, xCyberduck or YummyLite.
Be aware that iWeb 2 is not compatibnle with Mt. Lion so if you intend to upgrate to Mt. Lion sometime in the future you'll need to upgrade to iWeb 3 thru the purchase of an iLife 09 or 11 disk from a 3rd party vendor like Amazon.com or eBay. com.
OT

Similar Messages

  • My smug mug publish plug in did not update.  How can I fix this?

    How can I fix this? The Add-on <smugmug publish plugin> failed to install: General error message.   I was updating Lightroom and Photoshop on my laptop from the cloud, and it seems most things did fine, but not this plug in apparently

    Moving this discussion to the Photoshop Lightroom forum.

  • IWeb '08 Site - Published to MobileMe Account - Not Viewable by Others

    I'm new to iWeb. I created a simple site with a few pages, and then "Published All" to MobileMe. When I view the site, it looks fine. When others try, they get the "Are you looking for something on MobileMe?" page. I have looked at the "site inspector" to be sure that the site is not "private".
    I've been reading and reading and can't find a solution. Is there a trick to this?

    I got to your site using both of those addresses.
    People are probably missing a dash or missing the correct capitalizations. If any of those capitalized letters are typed in lowercase you get that "looking for something" page.
    If you want people to be able to type in a simple web address to get to your site, you probably need to acquire a simpler domain name ( from Go Daddy for instance) and then point it to your mobile me account.
    I have two domain names registered: www.phelpssculpture.com & www.phelpsculpture.com ( one has two s's and one has only one) these are registered with Go Daddy and point to my mobileme website:
    http://web.me.com/phelpssculpture/Site/home.html
    So on a business card I can put the simpler PhelpsSculpture.com and people reach my site by typing that into there web browser. The capitalization doesn't seem to matter on the GoDaddy shortened address, but it does seem to matter if you miss capitalize the mobileme address.
    Hope this helps,
    David

  • A few weeks ago I had to reinstall itunes on my PC because the latest itunes update did not install properly.  Ever since doing that something called Mobile Me keeps popping up whenever I open email (outlook) and slowing it down. How do I remove MobileMe

    A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it.  I was able to reinstall itunes and it works fine including syncing with my ipod.  However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program.  This a nusance and really slows down getting to my email.  From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes.  I can't find a way to remove this MobileMe from my PC.  I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it.  Any suggestions on how this can be removed?

    Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

  • How can I use my old MobileMe email address if I did not migrate to icloud by the deadline?

    I had a mobile me account that I did not migrate to icloud.  Now when I try and set up an icloud account using the old mobileme email address, it says that address is already in use. I then try and access it but the password doesn't work and it says mobileme is closed. When I try and reset the password, it says an email has been sent to the email on file...which is an old mobileme address that I cannot access.
    How can I get this email address set up in icloud? 

    Nice idea - I tried it but it doesn't seem to work (at least not for me).
    So here are the details in case, you can spot something more I could do....
    When MobileMe was live
    MobileMe ID was [email protected]
    AppleID (to make iTunes purchases) was [email protected]
    When iCloud went live (and MM was still alive)
    iCloud account was created based upon AppleID - [email protected]
    iCloud would not create [email protected] as was already in use (by me)
    iCloud would not merge [email protected] as iCloud does not merge
    MobileMe migration to iCloud option was not taken
    Deleted all data out of MobileMe account (mail, calendar, contacts, gallery)
    Deleted MobileMe mail account off of all devices
    When MM died
    I received notification that I had not migrated my MM account
    iCloud was happily working as Contacts/Calendar sharer using my AppleID of [email protected]
    Weeks later on Mac running 10.8
    System Preference - iCloud, already logged in with AppleID of [email protected]
    Then ticked the untick Mail box
    Long wait with small grey whirling cog box, stating "Loading". Eventually a BLANK message box with OK which then disappeared on a timeout.
    System Preference - Mail...  Re-added [email protected] (now picked up as iCloud account)
    Mail - Accounts.... Re-added [email protected] BUT got message "Mail can'y connect to the account..."
    So tried logging into www.icloud.com (using AppleID of [email protected] where my contacts/calendar now reside).  Clicked on Mail icon and received "@me.com Address Needed" message

  • ICal not publishing to MobileMe

    Simple problem:
    Trying to publish my home calendars to MoblieMe.
    When I select a calendar from ON MY MAC, then select CHANGE LOCATION and choose PUBLISH ON MOBILEME, then hit PUBLISH ... it says the calendar has been published.
    But when I choose VISIT PAGE, I get a dialogue box with the message "We're sorry but we cannot find the iCal you've requested. It's possible that it has been deleted or renamed."
    Sure enough, no matter how many times I hit SYNC or PUBLISH (in any number of ways) ... the calendar never shows up.
    What am I doing wrong?
    Thanks muchly,

    Unfortunately, I am also seeing this annoying Apple bug.... Published an iCal calendar to the web, to "MobileMe" as iCal offers, whereupon it proudly announces the URLs to subscribe or view the calendar... each link leads to:
    We're sorry but we cannot find the iCal you've requested.
    It's possible that it has been deleted or renamed.
    A similar false announcement is made when you publish a movie from iMovie to YouTube, where Apple announces the movie is published and you wait an hour assuming YouTube it taking its time, only to find out the movie never uploaded. That one can blame on YouTube (third party) making some change Apple (still?) does not know about... but iCal on a Mac publishing to an Apple service giving the same false positives is beyond lame.
    Imran

  • HT5527 I did not move my Mobileme account to iCloud. How can I get off the iCloud mailing list?

    I did not move my Mobileme account to iCloud. How can I get off the iCloud mailing list?

    If you migrated your MobileMe account before 1 August you should have signed into System Preferences>iCloud with it, and you would be able to see your calendars, bookmarks and emails on the iCloud website. Is this the case? Did you sign into iCloud with your @me.com address?
    If you did not migrate your MobileMe account you can no longer do so.
    If you did migrate, did you do so from a full MobileMe account or from a Family Pack sub-account? the latter did not get the complimentary storage (because their iDisks were only 5GB anyway).
    If you had a full MobileMe account, check on your Mac - System Preferences>iCloud - and see whether that shows the upgrade. If it doesn't, you probably need to contact Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
    http://www.apple.com/support/icloud/contact/
    You will need the serial number of the covered hardware.
    If you are not covered by AppleCare, then - in common with other free email services - there is no free support (MobileMe Support is no longer available) and you may be asked to pay a fee: in this case you should ask them to deal with it without cost (and hope they agree).
    Note that you haven't paid anything for your MobileMe storage since your first renewal date after 6 June 2011, and iCloud costs nothing unless you specifically choose to upgrade the storage. Note also the iCloud storage is not general file storage in the manner of the iDisk but is restricted to iOS device Backup, Mail, Photo Journal and Documents.

  • I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish.  There is a large X with a Question mark in the middle over the entire background of the page.  The error message says the file is missing.  I did not delete files.

    I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish.  There is a large X with a Question mark in the middle over the entire background of the page.  The error message says the file is missing.  I did not delete files.  How can I find files that seem to be missing?

    This is probably one of the files that is required by the template you are using.
    These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
    You need to dig down through the folders and files to find what you want...
    Contents/Resources/da.lproj/Templates/
    If the file is missing you would need to re install the iWeb app...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • Embedded m4v, avi and mov did not load, when published to server

    Hi there,
    today I created a new webpage, for the first time with iWeb. It work perfect on my mac including embedded movies. When I published it to my server, all pages loaded fine, but the movies did not. They started a bit and then everything ended in endless loading sessions. With ongoing "reloading" with the browser, it did improve, but did not work in one go.
    So I had to upload it to youtube, and embedded it via the youtube widget. This is not the way I wanted it, but I found now solution, why it did not load?
    Any idea what the reason is? Possibly wrong css lines?
    Thanks for your help guys.
    Karl

    What's the URL of your site? Visit your site in Safari, use the Window->Activity option and see what files for your site are not getting uploaded.
    There are ways to embed a movie other than dragging it onto the iWeb page. This method, Opening Item in New Specially Sized Window, has you uploading the file just once manually to your server and linking to it there. It does not load with the page but only after the Play button is selected.
    There is another way, Adding QT Movies via the Export for Web Option from QT Player, which is more difficult but gives a different appearance.
    What ftp client do you use?
    OT

  • HT5129 I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . .  but I have not knowingly published any photos to MobileMe.  How can I get this message to stop.  It's getting annoying.

    I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . .  but I have not knowingly published any photos to MobileMe.  How can I get this message to stop.  It's getting annoying.
    Also, how can I remove duplicate photos in an album without doing it manually?
    Thanks!

    When the prompt pops up next time you start iPhoto select Learn more. Then click on iPhoto preferences and select the Accounts tab. Delete your MM account and the quit iPhoto. Next time you open iPhoto the problem should be eliminated.

  • HT5129 How do I turn off MobileMe has been discontinued warning off.  I did not keep photo under gallery so there is no need to migrate.

    How do I turn off "MobileMe has been discontinued" warning off.  I did not keep photo under gallery so there is no need to migrate.  The warning keep on showing up after initial round.

    In the iPhoto preferences delete all references to MM and do likewise in the system preferences
    LN

  • I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING"  I have no idea what to do????

    I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING"  I have no idea what to do???? Any Suggestions?

    This is to do with the .htaccess file on your server.
    You either need to deal with this and open it with an html editor or change your web host.
    Do a search of this forum and there are plenty of posts that relate to parse error and .htaccess pages.  Have a look on the right hand side of this post and you will see similar ones like yours.

  • HT4597 mobileme to icloud, e-mails did not transfer.

    When i transitioned mobileme to icloud, not all of my e-mails transferred.  How can I access the emails that did not transition>

    From your backup.

  • Publishing to MobileMe - User name/password list lost and can not create ne

    I have a problem when publishing to MobileMe. All my previous username/passwords and not in the list, it is empty and when I try to create a new one it doesn't save it and only allows me to publish to everyone. Has anyone else have this problem? I am using iPhoto09.
    Vito

    I have a problem when publishing to MobileMe. All my previous username/passwords and not in the list, it is empty and when I try to create a new one it doesn't save it and only allows me to publish to everyone. Has anyone else have this problem? I am using iPhoto09.
    Vito

  • Icloud did not move my mobileme alias names.

    icloud did not move my mobileme alias names. is there a way to retrieve/reinstate them. I had more than the newly allotted three.
    Thanks

    Same thing happed to one of our MobileMe accounts.
    You need to call Apple 800.275.2273
    We called today, got a case number and they say it should be resolved in a few days.
    Oddly, dispute seeing many similar issues using Goggle, the tech said that he had never heard of this happening before.

Maybe you are looking for

  • Stop videoplayback in flash on frame exit?

    Is there a way to stop video playback from a video when I leave the frame? On the first frame a video plays, but I when click the button to goto the second frame, it stills plays sound. I can't add a stop action like flv_mc.stop because on the next f

  • How can I see in LabVIEW if an axis is enabled or disabled?

    Hello! I know how to set the axis in enabled or disabled state but how can I see if the command has been executed when using LabVIEW? I am using a PCI 7340 motion card with encoder feedback. Regards Ola Solved! Go to Solution.

  • PR process of maping

    Hi, Good Eveningl, The client scenario is like, ex, for 2009 in 2008   all the planned requirement will be prepared basing on the dates, and quantitiees once it is get approval from the management after a couple of months it then project get starts f

  • RAR Web service violation limit setting does not seem to work

    In RAR under config - preformance tuning one can configure the limit for violations of the webservice between RAR and CUP. If I set this to 20000, 100000 or even 1.5 miillion I still get the message: Risk analysis failed: EXCEPTION_FROM_THE_SERVICEVi

  • Pacman -Suy gives mod_perl dependency problem

    :: Starting full system upgrade... resolving dependencies... warning: cannot resolve "perl=5.12.1", a dependency of "mod_perl" :: the following package(s) cannot be upgraded due to unresolvable dependencies: mod_perl Do you want to skip the above pac