Publish to more than one iDisk

I have two iMac accounts and want to publish HomePage photos to either or both. When I open iPhoto and select an album to publish, the program only allows me to publish to one of the iDisks.
When the Publish HomePage page opens there is a drop down menu towards the bottom-left where there are two choices...my original iMac account and Counter (why Counter, is beyond me). I would like to configure this menu to have both accounts available so I could publish to either one/or the other iMac disks.
I have tried to publish to my first iMac disk and then finder-copy that icon to the other iMac disk (only a 59k doc). This works, but I am not sure it isn't because I am just accessing both accounts from the same computer and the second iDisk finds the photos on the first iDisk to display. Perhaps I should finder-copy the pictures in the Pictures folder too.
I have looked at the Export command, but this doesn't seem to create a HomePage format with themes.
Any help would be appreciated.
G5 Dual 2ghz Mac OS X (10.4.3) 1.5gb RAM; 400gb HD

Hi Scott,
Have you tried the manual way of exporting to your other iDisk?
Within iPhoto, share/export your album. Choose how you want them named, export size should be 800 x 600.
You can choose to export to a folder on the desktop, OR you can navigate to your iDisk/Pictures folder (by clicking on your iDisk in the left column of the Export window, then highlighting the Pictures folder...wait till the files show up.
Now click the button on the bottom left for "new folder" name the folder to the name of your slideshow. Now click "ok"
Wait till all your files are uploaded to your idisk Pictures folder.
If you exported to the desktop, then open up your iDisk folder (mount your iDisk), navigate to the Pictures folder and drag your folder of exported photos into the Pictures folder.
Go to your .Mac homepage.
Go to "create a page" and choose the album template you want.
In the next window your Pictures folder will open up. Highlight the folder you just uploaded, and click the "choose" button
Now you can finish your editing, titles, etc. and you are good to go.
Lori

Similar Messages

Publishing to more than one account

Pardon me if you see I've already asked this. I'm not used to the new communities format, and so didn't find my earlier post.
Anyway, I'd like to know if it's possible to publish the same photos to more than one account, e.g, Flickr, Facebook, and MobileMe. I know I can publish to one of them, but once I've done it, the icons for the other two are grayed out. I maintain each for different reasons and don't want to have to restrict myself to just one of them for the same set of images.
Thanks,
Nick

You can do this... you can even publish to more than one account of the same type (e.g. more than one Facebook account, or more than one MobileMe account, etc.)
When you select some photos and publish to web sharing site, Aperture creates an album (unless you're publishing to an existing album) and then switches you to that album. Look at the selected album in the "Library" view (left margin) and you'll notice it is now highlighting the new album at the social site... not the original Aperture project where the images originated.
For example... if I create an Aperture project called "Birds", have some photos in it, and then publish the album to, say, Facebook, it'll create a Facebook album called "Birds" and it will put me in that Facebook album (and gray out all the icons at the top.) If I would like to publish that same album of Birds to, say, Flickr, then I'd need to select the Aperture project named "Birds" and verify that the same photos are still selected. I can then click the "Flickr" icon to publish to Flickr.
The icons along the top which allow publishing to MobileMe, Facebook, and Flickr will only be highlighted if you are currently in an Aperture project/album.

Enable time based publishing on more tha one folder

Is it possbile to enable time base publishing on more than one folder at a time? I have a large hierarchy and it would be nice if I didn't have to change alle the folders.

Hi Ingvild,
It is possible to enable Time-based publishing in multiple folders.
But you need to write some custom code to make it possible.
Regards,
Sudip

How can I publish photos to more than one Facebook account?

How can I publish photos from iphoto to more than one Facebook account? Another way to ask is how to add a second Facebook account to the account list in iphoto?

Open iPhoto Preferences, click on the "Accounts" icon, and add another account.

Publishing more than one project at a time ...

If I have a series of small clips that I want to share with MobileMe Gallery (I do this frequently), is there a way to publish more than one at a time so I don't have to post, wait ten minutes, post wait ten minutes ... etc.?

Not so far as I know.

Publish more than one operation by WebService

Hi all
Somebody can helpme saying me how to do the following with eGate ( i cant use eInsight ):
For now im enabled to publish one operation and one webservice, but mi problem is that i can't publish one WebService with more than one operation and i can't change the mandatory "ExecutePortType", all my webservices url are in the form:
http://<server>:<port>/myws/ExecutePortType
1. Why the context name is about the WebService and why ExecutePortType is mandatory ?
2. I can't publish a Web Service with more than one operation ( The documentation says that the ExecutePortType supports just one operation )?
some body can helpme with an example ?

What client are you using? Are you using the netbeans enterprise pack test driver? If so, you can set the soap action in the test properties to match the ones you have defined in the WSDL.
Also if you could post the actual soap message you are sending that would help.
I also noticed that you're using parts defined via types with a document/literal binding. To be more basic profile compliant in that casue you may want to use RPC style instead - it is not strictly necessary, but increases interoperability.
Andi

More than one video publisher in a multicast enabled netgroup

I wonder what will happen if more than one members of
a netgroup publish video and audio with the same stream name at the same time; and all the members of the netgroup play the very same stream. the video will come in one by one or whatever? By the way, the the netgroup enables multicast
                groupSpecifier.multicastEnabled = true;
                groupSpecifier.postingEnabled = true;
                groupSpecifier.serverChannelEnabled = true;
The scenario is quite common in a video conference room.
Thanks in advance

if more than one stream is published to a group with the same name, then the data for all of the streams will flow through the group. however, each subscriber to that named stream will select/latch onto just one of them. there's no way to control which one each subscriber selects, though. if they're all active, then the first one from which a subscriber receives any data wins. if the stream onto which a subscriber has latched goes idle, then the subscriber will un-latch and selection will again be up-for-grabs to the first of the streams from which data is received.
each time a subscriber latches onto a new/different stream, you'll get a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event. you won't get one of those if the subscriber un-latches but then reselects the same stream.
if you're concerned with rogue publishers in a group, same name or not, consider adding a publish password to the group specification.

Can more than one person change a published calendar

Say you want to publish a calendar for a group and want to give access to everyone to make changes but also want those updates to be reflected on everyones ical within the group, is this possible?

Greetings and welcome.
At present, no, you can't have more than one person edit a published calendar. But with the release of OS X 10.5 you can, if you get the server version. At least that's what the latest word is.

Publish more than one site on mobileMe

Hi, I am a new user of Mac and I am trying to create two websites using iWeb, one as personal website and the other one for my association.
I would like to restrict access, using passwords, to different group of users. Can I publish two sites on my mobileMe using two different users'name and password?
Thank you for your answers

Welcome to the Apple Discussions. A little bit about iWebSites. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
This lets me edit more than one sites and only republish the one I want.
The URLs for you sites will be: http://web.me.com/yourMMe_accountname/site name
OT

Can we have more than one iWeb website per user ?

Hi there,
Sorry I'm, from today, a new iWeb user...
Could anyone tell me if as iWeb user, we can have more than one website on iWeb?
Thank you in advance very much for your help!

Yes. Here's how to have multiple sites in a single MMe account with one or more sites having a domain name.
A. All sites are in the same Domain.sites2 files
1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
Click to view full size
2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMe_Username/Site_Name, or, if there is no domain name, just MobileMe's full URL.
B. Each site is in its own Domain.sites2 file.
Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents. Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
In iWeb domainfile 1:
Create a dummy site : _dummy
with a blank page.
Create your working site : Whatever
Add pages
Publish both Sites to the same same location on the same server.
Your _dummy site is now the default Site.
Check.
In iWeb domainfile 2:
Create/Use your CurrentSite.
Move a page to the top of the Site and back. Publish the Site.
iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
Check.
From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
Simply do not touch your _dummy ever again. And never forget that.
3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
The entire site must be republsihing in order to get that new site.
Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
NOTE: the CNAME method provides a shorter URL: http://www.Domain_Name.com/Site_Name/Page_Name. CNAME does not have masking.
The URL forwarding displays the full MMe URL:   http://web.me.com/MMe_Username/Domain_Name/Page_Name.   With domain name masking that will be shortened to:   http://www.Domain_Name.com for every page of your site.
However, with masking visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.
OT

More than one web page on .Mac?

I already have a personal web page set up, but would like to set up a page for my Rotary Club. I don't want everyone to have to go thru my personal photos, etc just to see Club calendars and upcoming events. Can I have more than one site if I have storage room available?
2.1 GHz PPC G5, 1.5 GB DDR Mac OS X (10.3.8)

rcfgunkie,
Welcome to the discussions.
Navigate to your Web/Sites folder on your iDisk using the Go menu in Finder, and following this path:
Go/iDisk/My iDisk/Web/Sites/iWeb
In the Sites folder on the iDisk, and above/next to the iWeb folder, you will see an index.html file. Using the Finder again, create a new folder on your desktop and name it iWebIndexFile. Drag the index.html file from the iDisk Site folder into this new folder. It will be copied there. You will use this file again later to bring your short .Mac url back to your original site, as it is now, should you decide to.
Close iWeb.
Create a new folder on your desktop, and name it for the new site.
Navigate to your Domain file, following this path.
While holding down the option key, drag this Domain file into the new folder. It will be copied there. Create another folder on the desktop, and name it BackUpDomain. Option-drag the Domain file again, into the BackUpDomain folder. Now place this backup folder in your Documents folder. Close the Finder window, and open the folder which is named for the new site. Double-click on the Domain file inside.
iWeb will launch, and you will see your site as you have always seen it. The first thing you need to do is rename this site in the Site Organizer, giving it the name of your new site. Otherwise, it will overwrite the existing site on the iDisk when you publish it. Now delete the pages you do not want to keep, and create your new Welcome/Home page with the appropriate links in the navigation menu for this "new" site. You may also need to rename your pages. File/Publish to .Mac.
You now have two separate Domain files, containing two separate sites. When you launch iWeb, the application will open the last site that you edited. Create another folder, and name it for the original site. Navigate back to the path you used earlier for your Domain file, and again, holding down the option key, drag this Domain file into the new folder which has the name of your original site. Now you have two folders on your Desktop, each containing a individual Domain file, for your two sites. (You also have a backup of your original Domain file containing your original site, in your Documents Folder.) Create one more folder, name it Domains, and place both of these "Site" folders inside of this folder for good organization. From now on, to open either of your sites, choose the appropriate Site folder in the Domain folder, open it, and double-click on the Domain file inside. iWeb will open that site for you.
If your short .Mac url is pointing to the "new" site, and you do not wish for it to, navigate back to your Sites folder on your iDisk and replace the index.html file with the one you copied earlier; also, use the copied index.html file to replace the one in the iWeb folder which is next door to the Sites folder. Your short .Mac url will now point back to your original site, and you will access your "new" site using the url web.mac.com/username/iWeb/nameofnewsite.
Mark

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

Can I use more than one html5/js animation produced with Flash/createjs in a website?

Hi, I am producing some animations with Flash that will be delivered in html5/js trough createjs. The trouble is that, after including the first animation in my html website, the rest of the animations are overwriting with the first one, therefore, if I attemp to insert a second animation in my website, it will actually replace the first animation I already had placed...
I have already tried the following:
- change the default canvasID for another one
- change the resources and Javascript name spaces in Createjs export settings
- change manually the name of the functions (lib, img, cjs) in the Javacript file
None of these seem to fix the problem. So, I am now wondering if is actually possible to insert more than one animation in a website....
I would really appreciate a quick answer, as I am working on a project with a very tight timing, and really need to sort this out a.s.a.p.
Thank you very much in advance for the help.

then you made some mistake.
start with two different flas. one with a red rectangle on stage and the other with a blue rectangle on stage and nothing else. publish your html and js files.
combine the two into one and, if you have a problem, post the code from your one html file and your two js files.

Building report from more than one data model

Hi Experts,
I have a requirement to build a report in BI Publisher.
The report has three section each having their own data source.
When i try to create report in BI Publisher it allows me to associate one data model per report.
is it feasible to have more than one data source for a single report.
Cheers,
Andy

Hi Andy,
Not sure If this meets your requirement, please do have a look at the following links:
http://www.rittmanmead.com/2008/04/24/bi-publisher-reports-with-multiple-data-sources/
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_i.html
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_ii.html
Thanks.

More than one Detail table in the Master Detail forms!

Hi,
I need to have more than one Detail table in Master Detail Forms.
I want to see the details of the rows of the first Detail table in the Second Detail table. Please guide me to do this.
Sincerely yours,
Mozhdeh

You can do one of two things
1) Depends on the nature of your data model. I was able to manage many to many
relationships using views and instead of triggers. This solution is somewhat complex but can work in certain situations.
2)Works for situations where master record exists. create a page with mulitple portlets syncronized on some related key.
create the following package to use on the md forms to place on the one page to be rendered.
-- this package will facilitate the storage and retrieval of keys used by the related forms.
create or replace package session_var
IS
session_parms portal30.wwsto_api_session;
g_domain varchar2(2000) := portal30.wwctx_api.get_user;
function get_id (id in varchar2) return number;
PROCEDURE SET_ID
(ID in VARCHAR2
,p_val in VARCHAR2
,P_URL in VARCHAR2
END SESSION_VAR;
create or replace package body session_var
IS
--pkg body
function get_id(id in varchar2) return number is
l_store_session portal30.wwsto_api_session;
l_id number;
begin
l_store_session := portal30.wwsto_api_session.load_session(
p_domain => session_var.g_domain,
p_sub_domain => 'your domain');
l_id := l_store_session.get_attribute_as_varchar2( p_name => id);
return l_id;
end get_id;
PROCEDURE SET_ID
(ID in VARCHAR2
,p_val in VARCHAR2
,P_URL in VARCHAR2
IS
l_store_session portal30.wwsto_api_session;
begin
l_store_session := portal30.wwsto_api_session.load_session(
p_domain => session_var.g_domain,
p_sub_domain => 'your domain');
l_store_session.set_attribute(
p_name => id,
p_value => p_val );
l_store_session.save_session;
* Redirect to the page using p_url;
portal30.wwv_redirect.url(P_URL);
end set_id;
END SESSION_VAR;
--the form master detail form, section before display page enter the following code and publish as portlet.
declare
l_fs varchar2(4000);
l_s varchar2(4000);
v_con_id number;
begin
v_con_id :=rfq.session_var.get_id('CON_ID'); -- primary key and key used to relate details
p_session.set_shadow_value( p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_CON_ID', -- attribute on form related to primary key
p_value => '= '|| v_con_id,
p_language => portal30.wwctx_api.get_nls_language ,
p_index => 1
l_fs := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK', p_attribute_name => '_FORM_STATE');
l_s := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK', p_attribute_name => '_STATUS');
if l_fs = 'SAVE' and l_s is null then
WWV_MASTER_GENSYS_1(p_block_name => p_block_name,
p_object_name => p_object_name,
p_instance => p_instance,
p_event_type => p_event_type,
p_user_args => p_user_args,
p_session => p_session);
p_session.save_session;
end if;
if l_fs = 'QUERY_AND_SAVE' and l_s is null then
WWV_MASTER_GENSYS_1(p_block_name => p_block_name,
p_object_name => p_object_name,
p_instance => p_instance,
p_event_type => p_event_type,
p_user_args => p_user_args,
p_session => p_session);
p_session.save_session;
end if;
exception
when others then
PORTAL30.wwerr_api_error.add(PORTAL30.wwerr_api_error.DOMAIN_WWV,'app','generic','onLink', p1 => sqlerrm);
raise;
end;
--then create other md forms and publish as portlets in a similar manner.
-- create a form (form_session_vars) to call procedure session_vars and place the following code in the
addiontional pl/sql tab
WWV_GENSYS_1(
p_block_name => p_block_name ,
p_object_name => p_object_name,
p_instance => p_instance ,
p_event_type => p_event_type ,
p_user_args => p_user_args ,
p_session => p_session);
--then create a page and place the md forms created above as portlets on the page.
--create a link and target the form_session_vars and in the link target inputs
enter the values for your user parameters
id= CON_ID --"your primary key name"
p_url= url/page/"your_page"
--finally create a report (QBE or standard).
in the column formation section use the link created earlier to direct the user to the target page.
How it works.
When the link is selected the form_session_Var is called and automatically runs setting the primary key values
in the user session store. The step is required or the resulting page will not render properly. Then the user is redirected to the page where the portlets are rendered. The portlets start rendering, the before display page calls the session vars package to retrieve the key and put the form into query_update mode returning the data.
The portlets finish in query_and_save mode with details in update mode, the allowable insert, delete and none actions will be available for the details.
benefits: The session_Var package code is resuable as well as the form form_session_Var and the link. passing the key name and values are done at the report level and detailed in the report links. the md forms will need to reference their related keys.

Publish to more than one iDisk

Similar Messages

Maybe you are looking for