Publish Topology Error

Hey
I am installing Lync 2013 server, I am trying to publish topology but there occurs error:
"Microsoft.Rtc.Management.Deployment.UnknownObjectException" "Cannot locate Central Management store location container in the Active Directory global settings container"
Any help please

There might be duplicate entries in AD container. Please follow the below link and delete the duplicate entry...
http://lyncified.com/?p=187
Tek-Nerd

Similar Messages

SQL error while publishing topology (During installation of LYNC server 2010)

Following error was observed during publishing topology while installing LYNC server 2010.
Error: An error occurred: "Microsoft.Rtc.Common.Data.SqlConnectionException" "Cannot open database "xds" requested by the login. The login failed.
Login failed for user 'LYNC5\Administrator'."

Make sure you account has the relevant permissions and that you have run the topology builder as an admin.
When you publish and install the databases for the first time you will need permissions to SQL, I usually use an account with SQL sysadmin rights.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Publish Topology Failures after 1 of our Domain Controllers Failed

We had a domain controller fail and have decided we will not bring it back into production as it is an old server. We have seized the PDC, RIM and Infrastructure Master roles to another DC on the network. After doing this I rebooted te Lync server and but
the problem did not go away.
When publish Topology I get Enabling Topology - Failure. Looking at the logs I see the following:
└ ▼ Global Host Activation 12/6/2010 12:51:15 PM Failed
   └ Host name: onzlyncfe1.subdomain.domain.co.nz 12/6/2010 12:51:15 PM
   └ ▼ Activate Host 12/6/2010 12:51:15 PM Failed
   └ Found "onzlyncfe1": True 12/6/2010 12:51:15 PM
   └ Error: Message-"The LDAP server is unavailable." LdapError-"ServerDown" "onzad1.subdomain.domain.co.nz":"389"
► Details
└ Type: SuitabilityDirectoryException
└ ► Stack Trace
   └ at Microsoft.Rtc.Management.ADConnect.Connection.SuitabilityVerifier.CreateConnectionAndBind(String fqdn, Int32 portNumber, NetworkCredential credential)
at Microsoft.Rtc.Management.ADConnect.Connection.SuitabilityVerifier.IsServerSuitable(String fqdn, Boolean isGlobalCatalog, NetworkCredential credential, String& writableNC, String& errorMessage)
at Microsoft.Rtc.Management.ADConnect.Connection.ADConnectionPoolManager.GetConnection(ConnectionType connectionType, ADObjectId domain, String serverName, Int32 port, NetworkCredential credential)
at Microsoft.Rtc.Management.ADConnect.Connection.ADConnectionPoolManager.GetConnection(ConnectionType connectionType, NetworkCredential networkCredential, String serverName, Int32 port)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.GetConnection(String preferredServer, Boolean isWriteOperation, ADObjectId& rootId)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.GetReadConnection(String preferredServer, ADObjectId& rootId)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find(ADObjectId rootId, String optionalBaseDN, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCreator, CreateObjectsDelegate
arrayCreator, Boolean includeDeletedObjects)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find(ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCtor, CreateObjectsDelegate arrayCtor)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find[TResult](ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties)
at Microsoft.Rtc.Management.Deployment.Core.ServiceConnectionPoint.GetConnectionPointObject[TResult](DeploymentContext context, IServiceConnectionPointParent parent)
at Microsoft.Rtc.Management.Deployment.Core.ParentServiceConnectionPoint.Find(DeploymentContext context)
at Microsoft.Rtc.Management.Deployment.Core.ParentServiceConnectionPoint..ctor(Computer parent, DeploymentContext context)
at Microsoft.Rtc.Management.Deployment.Core.Computer.get_ParentConnectionPoint()
at Microsoft.Rtc.Management.Deployment.Core.Computer.GlobalActivate()
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)
└ ► Additional Details
   └ Error: The LDAP server is unavailable.
► Details
└ Type: LdapException
└ ► Stack Trace
   └ at System.DirectoryServices.Protocols.LdapConnection.Connect()
at System.DirectoryServices.Protocols.LdapConnection.BindHelper(NetworkCredential newCredential, Boolean needSetCredential)
at Microsoft.Rtc.Management.ADConnect.Connection.SuitabilityVerifier.CreateConnectionAndBind(String fqdn, Int32 portNumber, NetworkCredential credential)
   12/6/2010 12:51:36 PM Error
└ Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.SuitabilityDirectoryException" "Message-"The LDAP server is unavailable." LdapError-"ServerDown" "onzad1.subdomain.domain.co.nz":"389"" 12/6/2010 12:51:36 PM
Error
The LDAP server it is trying to connect is the failed one. Why is it only trying this 1 server when we have 3 other DC's in the domain?
Not sure where to start here so any help would be appreciated!!
Thanks,
Andrew

Please check your DNS Server if the SRV and A records for the old DC are still present and remove them. Then reboot the Lync server and try again.Technical Specialist Microsoft OCS & UC Voice Specialisation -
http://www.uwictpartner.be
If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

Trouble with publishing topology. Migration from Lync 2010 standard to 2013 standard.

Hi,
I have a problem with "Microsoft.Rtc.Applications.Testbot". When I publish the topology I receive an error, I've found many solutions to my problem. One of the best descriptions
I've found here: http://lyncme.co.uk/microsoft-lync-server-2013/unable-to-publish-topology-a-trusted-server-with-the-type-mcxinternal-and-fully-qualified-domain-name-fqdn/
I'm going to do the same method, but I do not understand whether I should remove both entries or only one. If I delete the record 2010, will the 2010 lync continue to work?

Hi Alan,
Lync is not that dependent on what is stored in Active Directory, and the topology builder should recreate any missing entries when it is rerun. I don’t think this operation is a high risk
for the deployment as a whole, but do be careful when using ADSI edit, it’s all at your own risk.
Here’s a similar case for your reference.
https://social.technet.microsoft.com/Forums/lync/en-US/01404c0c-ba63-4471-a5b2-8e110be451e3/lync-server-2013-topology-builder-errors-global-activation-?forum=lyncdeploy
Hope it can be helpful.
Best regards,
Eric

BI Publisher scheduler error ,plz help me how to fix these kind of errors

BI publisher scheduler error while we schedule the report in BIP.
Guide me what need to be done .... many of reports are running and failed everyday.
Help me regarding the issue..
Thanks,
Ram

Take a look at this thread if you haven't already: Re: Schedule problems
Based on the error message, it appears to be an issue with privileges. Make sure the user specified in the error message has the privilege to access the report.
Also I believe usernames are case sensitive, so check that out as well..

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Error when publishing topology after adding persistent chat

Hello everyone.
I could use some help, if anyone has some pointers.
I have Lync 2013 Standard running perfectly - everything works fine (a/v, chat, app sharing, etc).
I want to add a persistent chat server, so I set up a Lync Enterprise FE server and created a new pool.
I set up a SQL 2012 Server for the backend, and created a separate instance for Chat. I changed the ports in SQL manager, opened the ports, added the FQDN as a C Name to DNS. Added it to Lync.
Every time I try to publish the topology, I get an error that the machine I'm publishing isn't found in AD.
(If I remove the chat server, I can publish the topology without issue.)
Any ideas?
Thanks!
Candee

I'm a little confused. Did you set up a Lync Enterprise Front end just for persistent chat or for another reason? You wouldn't need a separate FE pool which is what confused me there.
Why are you using a DNS CNAME? Is that for the SQL server? Why not just use the real FQDN? If you're using a cname in the topology builder, than that's likely why it's complaining, because there's no AD object with that actual
name in AD.
I might have misunderstood though, can you clarify?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Publishing topology causes high CPU times? What?

I have a mixed environment currently with 2 lync 2010 front ends (Production) and 4 lync 2013 front ends (pilot pools).
When I make a change and publish the topology all 6 2010 and 2013 front ends go to 100% CPU time. IIS Worker Process is to blame and issuing "iisreset" on each server fixes it.
Where do I ever begin to diagnose this? No odd network traffic in packet captures, but I know right away when it happens as SCOM starts blowing up on CPU time and Lync conference join errors.

Each 60 seconds a task is run to determine if a change has been made to the CMS master and needs to be replicated. If a change was made, all replica need to synchronize with the CMS master. The replication may cause the high CPU usage. You should check the
duration of the High CPU usage. I think once the replication completes, the CPU usage will go down.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Lync 2013 Publish Topology Failed in window server 2012R2

Scenario
Lync Enterprise Edition!
Windows Server 2012R2 - LyncServer 2013
WIndows Server 2008R2 - Sql 2008 R2 Failover Cluster (Multiple Database and Instances Created) 5 Others Application Database also Created which has been used.
DNS Entries
HOst Name :
LYNCFE.consoto.com
Pool.consoto.com (Host Name Created Same IP as Lync Frontend Server)
dialin.consoto.com
meet.consoto.com
admin.consoto.com
DBLYNC.consoto.com
Virtual Instant Name of Sql Database and Instance name : DBLYNC\Lynccore
Permission Rights:
I am using the Administrator account for Lync 2013 Installation.
Domain Administrator Account Member to CSAdministrator group and RTC Universal Server admin group.
SQL sysadmin Account member Sqladmin and Domain administrator User.
ShareFolder-Lyncshare on Storage.consoto.com
Permission:
Everyone Read-write
RTCComponentUniversalServices Read-write
RTCHSUniversalServices Read-write
RTCUniversalServerAdmins Read-write
RTCUniversalConfigReplicator Read-write
Virtual Computer Name DBLYNC$ Full control
Issue : I have create one topology and try to publish but getting error.Log Detail Below
Feature: CentralMgmtStore
SQL Instance: domain-name.com\lynccore
Collocated: False
Found "RTCUniversalServerAdmins": True
Found "RTCUniversalConfigReplicator": True
Found "RTCUniversalReadOnlyAdmins": True
TaskFailed: Task execution failed.
Error:The network name cannot be found.
▼ Details
└ Type: IOException
└ ▼ Stack Trace
└ at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, Object dirSecurityObj, Boolean checkHost)
at System.IO.Directory.InternalCreateDirectoryHelper(String path, Boolean checkHost)
at Microsoft.Rtc.Common.Data.DatabaseManager.CreateDatabase(String dbFileBase, String dbPath, String logPath, Int32 dbSizeMB,
Int32 logSizeMB, Int32 dbGrowthMB, Int32 logGrowthMB, Int32 maxDbSizeMB, Int32 maxLogSizeMB)
at Microsoft.Rtc.Common.Data.DatabaseManager.CleanInstallDatabase(String dbFileBase, String initialScripfilePath, String
dbPath, String logPath, Int32 dbSizeMB, Int32 logSizeMB, Int32 dbGrowthMB, Int32 logGrowthMB, Int32 maxDbSizeMB, Int32
maxLogSizeMB)
at Microsoft.Rtc.Common.Data.DbSetupBase.CleanInstallDatabase()
at Microsoft.Rtc.Common.Data.DbSetupBase.CreateOrUpdateDatabase()
at Microsoft.Rtc.Common.Data.XdsDatabase.CreateOrUpdateDatabase()
at Microsoft.Rtc.Management.Deployment.Tasks.DatabaseCreator.CreateDatabaseForFeature(String featureName, Boolean clean,
Boolean update, String sqlServer, String instanceName, Boolean collocated, Boolean backup, Boolean noreindex,
DatabasePathAssignment[] pathAssignments, Boolean broadCast, String& logfile)
at Microsoft.Rtc.Management.Deployment.installdatabaseCmdlet.CreateDatabaseForFeature(Planitem i)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action,T arg)
TaskFailed: An error occurred while creating or updating the database for feature CentralMgmtStore. For details, see the log
file ‘C:\Users\Administrator\AppData\Local\Temp\2\Create-CentralMgmtStore-domain-name.com_lynccore-[2014_07_09]
[11_40_46].log’
TaskFailedResolution: Consult exception information and previous errors for more information on how to resolve this error.
Error: An error occurred: "System.IO.FileNotFoundException" "The network name cannot be found"


SQL Scenario
Windows Server 2008R2 - Sql 2008 R2 Failover Cluster (Multiple Database and Instances Created) 5 Others Application Database
also Created on the Failover Cluster.
Failover SQL Cluster
Active
Passive
Computer Name: Cluster1.Consoto.com
Computer Name : Cluster2.Consoto.com
ping cluster1.consoto.com reply IP 192.168.0.30 from Lync FE
ping cluster2.consoto.com reply IP 192.168.0.31 from Lync FE
SQL Database DBLYNC IP is 192.168.0.40 and also reply from Lync Server

Lync 2013 Edge--Unable to Publish Topology due to port assignment issues aka sharing conflicts

Hi all
I trying to setup the following , Single Lync Edge 2013, consolidated with single external IP address, but having issues
with the Topology Builder when I go to Publish.
This topology builder setup for Edge Server will not work:
Access edge
Port 443
Web conf
Port 444
A/V edge
5061
Error with in topology builder “…topologycontains one or more port sharing conflicts”.
It seems to object to the A/V edge of Port 5061….
Is there another port that I should be using for the A/V edge that is the best practice…?
Suffice to say….Other than Port “444” how does one chooses the other two (2)
unique ports to avoid conflicts…?
Many thanks in advance
Magellan99

5061 is used for federation, and as such implicitly tied to your Access Edge service. If you're using single IP for Edge services, leave them as default as Thamara has advised.
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems or queries.
For Fun: Gecko-Studio | For Work:
Nexus Open Systems
Follow @twitter

XML Publisher Report Error

Hi All,
I am trying to create an xml report from a standard oracle report. For that, I have copied the standard report's concurrent program and created a custom concurrent program by changing the output from 'Text' to 'XML'. When I run the custom report and took a look at the output of the concurrent program, I see the below error:
An invalid character was found in text content. Error processing resource 'http://...
<DESCRIPTION>CD
t:1em;text-indent:-2em">- <G_ITEM>
<C_FLEX_ITEM>44-5555-66</C_FLEX_ITEM>
<DESCRIPTION>ABCD W/O PRRS</DESCRIPTION>
- <LIST_G_VENDOR>
- <G_VENDOR>
<VENDOR>VENDOR 123</VENDOR>
I see that the error is because, the xml parser has encountered a charecter '/' in the tag 'DESCRIPTION', which it is getting confused with the ending tag.
The charecter may be deleted if it as the case with the description of one item, but there are numerous item descriptions with / in them.
If this is the limitation of XML Publisher, could anyone please help me with the approach to create these kind of reports in XML Publisher?
Thanks in advance.

Well, I figured out what the problem was.

PeopleSoft XML Publisher report error with java.io.FileNotFoundException

Hi,
I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
[012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
[012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
     at java.io.FileInputStream.<init>(FileInputStream.java:89)
     at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
     at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
     at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
     at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.

We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

XMl Publisher Preview Error

Hi,
We are using Oracle application 11.5.10 and I installed the BI Publisher Desktop 5.6.3.
I developed the template. Loaded the sample .xml file. There are no error when I validate the template. When try to see the preview in PDF document received the below error message. Can any one help me in this.
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Test.xml
FOProcessor setLocale: en-us
java.lang.ClassCastException: oracle.apps.xdo.template.fo.elements.FOInline cannot be cast to oracle.apps.xdo.template.fo.elements.table.FOTableBody
     at oracle.apps.xdo.template.fo.elements.table.FOTableRow.init(Unknown Source)
     at oracle.apps.xdo.template.fo.FOHandler.startElement(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTHandler$SEEntry.sendEvent(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTMerger.startElement(Unknown Source)
     at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
     at oracle.apps.xdo.template.fo.FOProcessingEngine.process(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:632)
     at RTF2PDF.runXDO(RTF2PDF.java:466)
     at RTF2PDF.main(RTF2PDF.java:254)
Thanks,
HC

Hi Rownald,
I am stuck with the same error:
Error one \ts01\u00\app\ts01\common\admin\out\xdoDtSCIn59Vq010510_0131541560.fo (The system cannot find the path specified)
Our Application and database servers are the same and the path \ts01\u00\app\ts01\common\admin\out\ already exists and has all the permissions.
I almost wasted 2 days for just this issue. Any help would be really great!!
Thanks in advance.
Kumar

Need to find the root cause of the XML Publisher report erroring out.

Hello All,
After I ran for a Particular Invoice, to have output in XML Publisher Report for Invoice Priting. It got errored out with the below details which i got from the OPP Log file.
From the below information, how do I get exact root cause. Please do the needful.
=======================================================================
[8/6/09 11:16:32 AM] [774712:RT14922832] Executing post-processing actions for request 14922832.
[8/6/09 11:16:32 AM] [774712:RT14922832] Starting XML Publisher post-processing action.
[8/6/09 11:16:32 AM] [774712:RT14922832]
Template code: XXBIORAXINV_PHY
Template app: BIO_AR
Language: en
Territory: 00
Output type: PDF
[8/6/09 11:16:33 AM] [UNEXPECTED] [774712:RT14922832] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: oracle.xdo.parser.v2.XMLParseException: Unexpected EOF.
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
     at oracle.xdo.parser.v2.XMLReader.popXMLReader(XMLReader.java:526)
     at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1287)
     at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
     ... 17 more
[8/6/09 11:16:33 AM] [774712:RT14922832] Completed post-processing actions for request 14922832.
=======================================================================
Please do the needful. Suggest the steps to get rid of this critical - issue.
Thanks,
Abdul

Please check if Output Post Processor concurrent manager is down/ inactive.
Restart the manager/ get it restarted and test the issue.
System Admin >> Concurrent >> Manager >> Administer

PeopleSoft Connected Query in XML Publisher Report - Error

Hello - I'm getting this weird error when trying to run an XML Publisher report off a PeopleSoft Connected Query. The Connected Query runs fine to an XML File. Any ideas? The parent/child queries in the connected query don't use any prompts.
PCodeWTL(1/3): Prompt Field Name is invalid because it exceeds the maximum allowed size of %1 (50,493)

We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

Publish Topology Error

Similar Messages

Maybe you are looking for