Publish updates on a single page question

Hi,
I had a discussion with my client yesterday about after a 100+ Muse site is published, if you go back and need to make a change to one single page, then re-publish, he was concerned that you'd have to re-export the 100+ site just for this single page change.
Is there a way for me to go into Muse and edit a single page and then just re-publish this single page? I believe you can do this with Catalyist but I'm not sure how (we currently do not have CC).
Any advise or tips on this is appreciated. Thanks.

Hello Michael,
When you hit publish or upload to your host, you have an option that allows you to either publish/upload the whole site again or only the modified pages. This is the option: http://jingsite.businesscatalyst.com/jing/2013-10-01_0052.png
However, if you have made changes to a master page, which is applied to several other pages, then Muse will publish/upload all those pages again to update them accordingly.
Hope this helps.
Cheers
Parikshit

Similar Messages

Can iWeb09 update single pages without publishing the whole site?

Does iWeb 09 have the ability to just update 1 single page without having the need to publish the whole website?
Thank you

Really? I've been using iWeb and MobileMe for as long as iWeb has been out, and can't find any option to publish individual pages rather than full sites.
iWeb '09 does clearly introduce the option to publish a single site or all sites, but as for a single page within that site -- when other pages in the same site may have also changed but you don't want to (re)publish them yet -- that capability eludes me. I'm not at my proper system at the moment, however, and am am just writing from memory.
Can you clarify, Roddy?

How to use a single page for create and update mode.

Hi,
I need to develop a single page to be used for both create and update modes.
I am going to use a variable MODE
and i will set this in the emp summary page.
Based on the button clicked by the user i have to render the JSF page.
For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
This is working fione for me.
So now the issue is
when the user clicks on CreatEmp button.
i need to enable my VO for insert operations.
for this i wrote the code like this in the beforePhase event
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
DCDataControl dcControl = bContext.findDataControl("DataControl");
Application app = ctx.getApplication();
ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
System.out.println("After Appmodule initiation");
// get the VO reference and initiate the query
System.out.println("Before Page VO initiation");
PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
//ViewRowImpl row = (ViewRowImpl) vo.createRow();
/* TO CREATE AN EMPTY ROW*/
Row row=vo.createRow();
System.out.println("New Row is created");
//vo.createKey(row);
vo.insertRow(row);
vo.setCurrentRow(row);
By doing this a new empty page is rendered.
But when i fill up the values and click on ok.. i am getting the error like this..
JBO-27023: Failed to validate all rows in a transaction.
JBO-27027: Missing mandatory attributes for a row with key null of type View3
JBO-27014: Attribute Id in View3 is required
JBO-27014: Attribute PageeId in View3 is required
Please point me out where i am missing.
Thanks

Hi,
In my opinion you are over complicating things.
This is what I do for using the sme page as both create and update without all this code.
1) Create a browse page containing a an adf table with a select one component bound to your view object.
2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
3) Set the action property of the view button to edit
This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
Hope that helps.
Thanassis

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

First do the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Update/save record on a single page?

Hi all. I've got a form with read-only fields displaying database data in a repeat region. If I click the Edit button at the end of each line, the 3 fields post to update.php where I can edit the data. The Save button on this page updates the database and returns to the list. I am new to PHP and was wondering if this can all be done on a single page so all the fields in the repeat region are editable/saveable? thanks guys.

Unfortunately because form field names need to be unique in case, let's say a user edits 2 different forms, making everything editable live is not usually the best way to go. Personally, from a beginner's standpoint and from a compatibility standpoint, your way is the best way to go.
The only other approach would involve javascript and JSON to pass information between PHP and javascript. Basically the end result would be a Facebook style post system, where what happens in the background is you actually load a processing and/or editing page and then post results back to the original page. It's a bit complicated for a beginner. It might not be for you immediately, but it could always be interesting to learn about:
http://www.99points.info/2010/07/facebook-style-wallpost-and-comments-system-using-jquery- ajax-and-php-reloaded/
Obviously that is just for a wall, but if you understand how to edit the pages and how the data is moving it could easily fit your needs.

Can you publish a single page at a time?

Busy creating my own website and gradually adding a new page each night, but every time I publish iWeb publish's the whole site (or attempts too- keep getting publish error message). Is there a way we can publish one page at a time? If for example I want to edit a single page, does it mean I have to go through the whole publishing thing all over again for hours?
help much appreciated.
Cheerio.

It's all or nothing with iWeb. Even after correcting a typo in a single word, publishing will upload everything. Well, that's not exactly accurate. That's definitely what happens when publishing to a local folder, but it seems that iWeb/.Mac are intelligent enough to distinguish between old and new material. Even allowing for this, though, publishing will be far from instantaneous.

Can two people update a single Pages document at the same time like with Google docs?

Is it possible for two different users to concurrently update an iWork document (pages/numbers/presentation) that resides on the iCloud?

That I don't know swithout testing.
My suspicion is that both users probably can open the same document but there will be conflicts when saving. Last one in gets to overwrite the others work.
There is nothing in place that I know of that arbitrates access.
Peter

After updating to 5.1, pages no longer lets me convert long, single page (up to 8 1/2 x 50) document to an 8 1/2 x 11 document with many pages.

I have been using pages to create a document that I always export in two ways. 1st, I export a single page document that contains all of the data (sometimes this can go as long as 8 1/2 x 50). I have to do this for web purposes. Next, I duplicate the document, and change the page setup to 8 1/2 x 11, turning it into a document with many pages. This is for printing purposes.
Before upgrading to Pages 5.1, this worked flawlessly. After the upgrade, when I change the document to 8 1/2 x 11, Pages just deletes all of the data after the 11'' mark.
I am trying to make it behave like it did before the upgrade: when I convert the document to 8 1/2 x 11, it just made as many new pages as necessary and didn't delete any of the data.
How can I do this?

Pages 5 is buggy and has had over 100 fetaures removed.
Pages '09 should still be in your Applications/iWork folder, use that.
Peter

How to handle jquery and ajax call in single page application using coded ui

Hi,
I am facing a very tricky situation while using coded ui. My application interact with ajax and I was facing the issue to handle the ajax in the login page and other pages. I went through the post : http://stackoverflow.com/questions/17849074/jquery-ajax-success-not-getting-triggered-with-coded-ui-test-project
and got solution for my problem. Now when ever a ajax is getting called in the page its getting handle with app config file. However the issue I am facing right now is.
When i click on a button a window will appear which is actually a "div tag". Please see the image below. In the that window when I have to select a item from drop down, the ajax will get called, however it will get called only for the window,
it wont be called for the entire page.. i.e. it will update only the window. I am not able to handle this ajax call, script gets stuck in refresh state. I will request you guys to provide a work around for it.
I would like to add more details - Visual studio version - 2013 update 3, IE11.
Application details: Its a single page application which uses bootstrap framework. All the ajax call are dynamic.
Thanks in advance.

Thanks for the reply.
The window is not exactly a pop up window. Its a div tag in the same page. As this is my first time to work on a single page application I am not sure how it works. For the entire page I am able to handle the ajax call however the action performed
in the div tag is not getting handled.
Code for the window, I am not sure to what extend will it be helpful.
<div class="modal-content"><div class="modal-header"><div class="bootstrap-dialog-header"><div class="bootstrap-dialog-close-button" style="display: none;"><button class="close">×</button></div><div
class="bootstrap-dialog-title">Move Item to different task [FocusAudit]</div></div></div><div class="modal-body"><div class="bootstrap-dialog-body"><div class="bootstrap-dialog-message"><div><div
id="dashboard">
<table class="TFtable">
<tbody><tr>
<td colspan="2">
You are about to move the 24 selected item item to a different task. Select the task to which to move this item, (Optionally) enter notes about the task change, and click 'Change' to continue.
</td>
</tr>
<tr>
<td>Select New WorkFlow:</td>
<td><select class="form-control" id="MA_workflow" onchange="ChangeWorkFlow()"><option value="647446014">Batches<option value="647446007">Claim<option value="647446065"
selected="">Workflow1</option></select></td>
</tr>
<tr>
<td>Select New Task:</td>
<td><select class="form-control" id="MA_actions"><option value="647446025">BatchRebuild</option><option value="647446054">Complete</option><option value="647446039">DataIntegrityCheck</option><option
value="647446038">FocusAudit</option><option value="647446053">FocusAuditMiner</option><option value="647446037">FocusAuditSelect</option><option value="647446055">LocationRouter</option><option
value="647446029">MineForSBT</option><option value="647446022">OCRtoWebDE</option><option value="647446024">OnePass</option><option value="647446049">OnePassRouter</option><option
value="647446050">OnePassUS</option><option value="647446060">QAuditImporter</option><option value="647446045">QIAutoAuditGrader</option><option value="647446058">QIAutoAuditInjector</option><option
value="647446048">QIMiner</option><option value="647446040">QISampler</option><option value="647446056">QIVerify</option><option value="647446059">QIVerifyGrader</option><option
value="647446047">QIVerifyUS</option><option value="647446021">RecoRules</option><option value="647446082">Review</option><option value="647446042">Router</option><option
value="647446023">Validate</option><option value="647446081">Verify</option><option value="647446080">WebDEFileCreator</option></select></td>
</tr>
<tr>
<td>Select New Status:</td>
<td>
<select class="form-control" id="MA_status">
<option value="ready">Ready</option>
<option value="reject">Rejected</option>
<option value="hold">Held</option>
<option value="ready">Keep Status From Original Task</option>
</select>
</td>
</tr>
<tr>
<td colspan="2">Notes:</td>
</tr>
<tr>
<td colspan="2">
<textarea name="MA_statusnote" class="form-control" id="MA_statusnote" maxlength="250" rows="5" cols="40"></textarea>
</td>
</tr>
<tr>
<td style="text-align: right;" colspan="2">
<input class="btn btn-default list-inline" id="btnSubmit" onclick="prepareData_MoveToAction();" type="button" value="Change">
<input class="btn btn-cancel" id="btnCancel" style="padding-left: 5px;" onclick=" dialogInstance2.close();" type="button" value="Cancel">
</td>
</tr>
</tbody></table>
<div id="overlayDialog" style="display: none;">
<div style="width: 100%; text-align: center;">
<h1>Processing...</h1>
<img src="Images/ajax-loader.gif">
</div>
</div>
<div id="dData_MoveToAction" style="display: none;" data-itemcount="24" data-oldactionidno="647446079" data-oldstatus="ready" data-oldactionname="FocusAudit" data-fnparent="PS"></div>
</div>
<script id="scrpd" language="text/javascript">

</script></div></div></div></div><div class="modal-footer" style="display: none;"><div class="bootstrap-dialog-footer"></div></div></div>
I agree the point the UI has to be active or else the script will have issue during the playback. In my scenario I have to work on that window. I have to perform action on it. Now when the window(div thing) comes up the page in the background goes disable
till the action is performed on the window or the window is closed. I have to perform action on it then only I can proceed with the TC automation. Please let me know any option to solve this problem.
Thanks
Ahetejazahmad Khan.

How to split a parallell-page PDF into single-page PDF

My situation: I have a few hundred pages of files I made quite a few years ago, optimized for "self-publishing" via the printer. I no longer have any source files (my own bad). These files have 2 pages next to each other in an A4 landscape PDF. I would like to change and combine these files into a US Letter portrait PDF.
I have browsed earlier, similar threads, most notably the most referred to thread:
http://forums.adobe.com/message/3331516
which recommends using Adobe PDF printer. However, as this thread points out, and as I for one have found on my own system (10.8.3), Adobe PDF printer is no longer an option on Mac OS X (version 10.6 and on):
http://forums.adobe.com/thread/556366
So the question then is: How do we now split double-page landscape PDFs into single-page portrait PDFs?

Since at least OSX.5 adobe has removed PDF Printer which was begining to fail it was written in Adobe's altered version of javascript and it was a wonder it was working to begin with They replaced it with an Automator action that's called up through the print Driver.
Here are the steps for applications other than Acrobat.
create you doucument. laying it out the way you want it.
Go to Print menu.
click and hold the pdf button - a context menu pops up.
now scan the list of choices and choose Adobe PDF or Adobe Quality PDF (depends on version of OS)
wait for direction fields to come up and make the desired choices (the first screen is basically job options).
when asked ask for name either ecept name give or choose name of your choice.
Browse to desired location for file
then click save.
How the PDF is layed out in acrobat is determinedby acrobat. Adobe add an additional Layer on top of the Print Driver. You can by pass it and use the Print Driver but if there is an orientation switch in your docment the page is turned so everything comes out with same edge of Paper
Oh, look out for a Grand idea Adobe did that even Forest Gump would have left alone.
If you want to do duplex printing to a PDF with more than one page you won't be able to do so whether you have your printer setup for duplex printing. You can go back and forth from printer setting s to Printer setting toggling off and on til you turn blue in the face. You have to go into the document properties and loo for a command called SIMPLEX printing its on by default and needs to be turned off. Even my cat Boots would be smart enough not to put that in.
This settinging does not permanently turn off and you have to do with each document you create or resave.

How to save ONE single page of pdf document?

I have a 115 page pdf document that I can open in Adobe Reader. I want to email just ONE page of this file to someone. How do I save just that one page from the file (as opposed to sending the entire pdf document)?
I know, lame question. Thanks for any help!
Angela

If you're on a mac forget about Acrobat on Lion (maybe even Snow Leopard and Leopard too). I ran into this issue on Lion so here I am....
you have to go through the routine of "printing to",, With Acrobat go to the printer preferences panel > select pdf, select save as pdf... only to find you cannot and get some even more riduclous and useless pop up telling you to chose file save as.... which only lets you save the entire document! Utter
waste of time and space...and not what you are after.
Solution... Open the pdf with Preview, then Cmd + P will bring up the same dialog box mentioned above with pdf down bottom left... First enter the page number into the pages option's From dialog... eg From 40 to 40 (= page 40 only) then hit the pdf bitton and dave as,,, Works perfectly with Preview but no chance with Acrobat!!!! I am starting to get the feeling that this product is fast becoming redundant as it seemingly is not up to basic operations such as printing or saving off a single page anymore. Plenty of freeware solutions are now available on the net - some of which I am quite sure would handle this... but since preview is installed on mac by default.... why not?
After all this have a good think abou whether you will or even need to Upgrade Acrobat the next time round. It seems the more 'advanced' Adobe get the more useless certain products are becoming.... Don't know if it's just me...
UPDATED Sept 11
Seems there is a way to print a single page with Acrobat X.. but not at all as straightforward as mentioned above...
You need to go View>Tools> Extract, then select the page you want and save it as a seperate pdf. Then open the new pdf and print that... Wonderfully intuitive on Adobe' s part....

Single Edition questions!

Hi there,
I need an updated, quick and precise answers for these Single Edition questions...!
(1) For what I got until now Single Edition do not allow clients to publish a store like a bookstall of magazines. Is that right?
(2) That said, every app built and sent to App Store is "unique" and has no physical connection with other apps built and sent later. Right?
(3) Even though having Creative Cloud and being able to publish unlimited Folios... There is no way we can do a bookstall??
(4) Even using Html5 resources?
Thankyou all...

1) Correct
2) Correct
3) Correct
4) Correct
A bookstall / kiosk / multi-issue-app is only available for Adobe DPS Pro.
Check out: http://www.adobe.com/products/digital-publishing-suite-pro/faq.html
How does Single Edition compare to Professional and Enterprise Editions?
Professional Edition is an off-the-shelf solution designed for customers who publish frequently updated content multiple times a year and require the ability to sell single issues or content subscriptions (as supported by individual marketplaces) through app stores including the Apple App store, Amazon Kindle Fire Newsstand, and Android Marketplace.
Enterprise Edition is a custom tailored solution that meets the individual needs of professional magazine and newspaper publishers, large corporations, membership organizations and advertising holding companies. Enterprise Edition is fully extensible and can be integrated with back-end editorial workflow solutions such as K4 and WoodWing, print fulfillment services, and dynamic rich media ad platforms.
Unlike Enterprise and Professional Edition customers, Single Edition customers do NOT have access or the ability to:
Create multi-.folio applications
Update content embedded in an application once it is published
Sell through multiple market places (Apple App store is only supported at this time)
Access foundational analytics powered by SiteCatalyst
Extend and integrate with other back end services/platforms

Print a report adapted a single page.

Hi,
I have a report in Answer that is printed on two pages.
I wish that when I choose to print the report in pdf, it is adapted a single page.
Is it possible from OBIEE?
Thanks
Sara

Thanks, I was afraid that the answer was "Publisher".
Unfortunately you can decrease the font size in the cell of the report ....
You can not edit the xml report to adapt it to the page?
If there are no official answers to this problem .... thanks a lot.
Sara

Can i display My application iview and transaction iview in single page ?

Hi,
I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
1.> How i attached my application to iview ?
2.> How i created Transaction iview ?
3.> Can i attache my application iview with transaction iview if it is possible then how ?
4.> Can i display My application iview and transaction iview in single page ?
Please guide me in this procesure.
Regards,
Gurprit Bhatia

Hi Gurprit,
1.> How i attached my application to iview ?
       You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
2.> How i created Transaction iview ?
       Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
3.> Can i attache my application iview with transaction iview if it is possible then how ?
      No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
4.> Can i display My application iview and transaction iview in single page ?
      Yes, you can attach both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select add IView to Page ßß: Delta Link.
Hope this helps.
Regards,
Amit

How do I use the single page feed on my Canon MX340?

I am trying to figure out how to feed single pages into the Canon MX340 from the slot on the top. How to make this happen?

Hello segurry,
To feed documents into the automatic document feeder (ADF) of the printer, please follow the instructions below.
Loading Documents in the ADF
You can load documents to copy, fax, or scan in the ADF.
Note: To scan a document at optimum quality, load it on the Platen Glass.
Make sure that any original has been removed from the Platen Glass.
Load a document in the ADF.
Open the Document Tray.
Insert the document in the Document Tray (2) until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the Document Tray.
Note: When you set the alarm to be silent in Device user settings of Device settings, the alarm will not beep even if the document is inserted in the Document Tray.
Adjust the Document Guides (3) to match the width of the document.
Do not slide the Document Guides too hard. The document may not be fed properly.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Publish updates on a single page question

Similar Messages

Maybe you are looking for