Published ASNs not seen in SNC

Hi,
We have an issue where the Published ASNs are not seen in the ASN Overview report in SNC. Supplier indicated they created an ASN and ASN number was generated for it. Upon Investigation, the ASN number provided by the supplier did not show up in SNC. There was no XML found for ASN and there were no signs of the ASN number in the header table. There are also no logs found for user in SLG1 and no short dumps found as well. I could not replicate the same issue in Quality.
Has anybody come across this sort of issue? Request your inputs in finding the reasons why the ASN number was generated and published but went missing in SNC.
Thank you.
Sreedhar

Hi Sreedhar,
Can you check what master data is valid or not?
There can be some issue and hence system is not publishing ASN.
How supplier is creating ASN.(try to get detail level steps for ASN creation)
This will help you to replicate the issue in Q system.
Regards,
Nikhil

Similar Messages

Text seen in swf file but not seen in flash pro. publish

I am using fmath formula component for flash. when i push ctrl+enter, texts in formula object are not seen, there is only tiny squareroot symbol. however, when i open created swf file, everything seems normal. I use flash player version 11.2. . Also, everything is ok in version 9.
http://www.fmath.info/flash/download.jsp

Are you setting the font that is being used to display the formula yourself? If so is it properly embedded and issued to the component properly? A quick way to check is to use a known system front (Arial, _sans, etc) and see if text shows up. If it does you're just not either embedding properly or aren't pointing to the font correctly in the component.

Why the menu to move from one page to another is not seen when the page is online?

On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
why the menu to move from one page to another is not seen when the page is online?
Thank you,
Roger.

Where are you publishing and how are you uploading the files?

No Relationship found to partner error..in Maintaining the ASN Number Ranges in SNC SC

Hello SNC Gurus,
We are working on one of SNC implementation project. We have to implement three Scenarios 1. Purchase Order Processing 2. Release Processing 3. Supplier Managed Inventory. I have done the configuration part perfectly in SNC for the above 3 scenarios.
I am facing an issue when i am performing the activity Maintaining the ASN Number Ranges activity.
Exactly the Error message is " No Relationship found to Partner **************(Partner No)
Here i created different partners to different Users for example for Customer Users and Supplier Users seperate business partners.
When i am trying to maintaining the ASN Number Ranges in SNC, I am getting the above issue. Not able to move forward and struckup this particular point. Please reply me the solution to overcome this issue, if anybody faced the above kind of issue earlier in your project expieriances.
Thanks,
SN.

Hi Bharath,
Here in i am confirming the below answers for your questions
1. Yes its assigned to Partner. Its assigned to Customer.
2. Customer View -- Via /n/sca/ich_c t code.
3. I am defining the number range interval for the Customer. which my user id already assigned to Customer.
Here i am facing the issue in 2 activities. Facing the No Relationship Found to PartnerNo error in 1.. Maintaining ASN Number Ranges Attribute
Facing the error with " You are not authorized to maintain the Customer or Supplier " in 2. Maintaining ASN Number Ranges Intervals.
This is the input i entered in SNC Web UI path ASN Number Ranges Attribute Activity : Master Data --> Number Ranges --> Number Range Attributes: Interval Type : ASN, Customer : 1000 , Supplier : Vendor which is CIFFed to SNC. Append/Replace : A, Prefix : A2, No Overwrite : Check box should select , Max Number Length: 10
For Maintaining ASN Number Ranges Intervals activity : Customer : 1000, Supplier: 390001, IntervalFrom : 00000001 , IntervalTo : 19999999
Please let me know for any more information required. and reply back to me based in the above inputs mentioned is there any route cause to resolve this issue.
Thanks,
SN

ASN not gettting updated after Workorder completion phase

Hi ,
I am doing workorder collaboration scenario. But after completion of the phase and when i complete transportation phase (shipping) , ASN should get generated in the background and it should update the conformation control key with inbound delivery in Purchase order in ECC.
But it is not happening , I dont know how to check whether the ASN is created in the background in SNC , The ASN is not getting updated in ECC in PO .
Can anybody help me to resolve this issue.
Thanks and Regards
shailesh

Hi Shailesh
I think first step would be to check whether ASN is getting created in SNC - you may go to Web GUI -> Delivery -> ASN -> ASN Details. If you do not see any ASN there, the issue might be from supplier side.
How are you bringing ASN to customer's SNC system -
1) Creating directly in Web GUI (as Nitin has mentioned)
2) Bringing as XML message from supplier
3) Using EDI or other third party system
Thanks,
Prasun

ASN not netting against PO in ASCP plan

Hello!
I am loading Advanced Shipment Notices (ASN) from supplier directly into planning instance using the "Load Transaction Data using Self Service Loads" concurrent program.The ASN is referencing the PO number that it is shipped against. However, when I run the ASCP plan, the ASN is seen as "In Transit" supply on top of the PO quantity. I expected that the plan should not consider ASN as additional supply, but should be netted off against the PO quantity. Appreciate any pointers on how to make this work correctly.
Cheers!

Hi
Based on your comment about the order number, it seems that you're trying to look for sales orders which were scheduled using ATP/ GOP after last ASCP plan run. You may either be using ATP based on collected data or some of these items aren't included in your plan thereby forcing ATP to use ODS/ Collected data to promise/ schedule these sales orders.
When ATP/ GOP promises these sales orders using collected data, you'll see them dynamically inserted in ODS data (msc_sales_orders) and order number will show up as "258945" but after next collections, same sales order record is replaced by collected version with SO# as "258945.USA Sales Order.ORDER ENTRY(6.2)".
Here are possible ways to validate/ resolve this issue:
1. If you use "ATP/CTP based on Planning Data", these SO will be inserted dynamically in ASCP Plan and will be visible in ASCP workbench in Pink/ Magenta color though no pegging will be available until next plan run. You'll find these orders will have a record_source value as '1'
2. If you use "ATP based on Collected Data", these SO will be included in the ASCP plan in next collections/ ASCP Plan run and same must be happening now as long as these items are included in the plan based on your plan options setting. Please note that ASCP Plan is a statis information as of the time of plan run and any SO scheduled after ASCP plan run won't be included until next plan run.
Hope this clarifies the concern and you'll be able to validate the scenario in your case. For any further concerns, please contact me directly and I'll be glad to help you.
Thanks
Navneet Goel
[email protected]

Ipod not seen by windows or itunes

Hello, I'm totally frustrated and have been searching for hours. Please someone help.
- Nano 8 gb
- Windows xp
Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
I'm completely frustrated, please can someone help me.

I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
What I did was:
1. Uninstall i tunes
2. Restart my computer
3. pluged my ipod in a slow usb line
4. waited until my pc recognized it in there. It took a little while.
5. re installed i tunes from apple.com
6. waited until i tunes recognized my ipod
7. updated my i pod with my library it took a long time because i was in the slow usb plug.
8. re plugged my ipod into a 2.0 usb line
9. i tunes recognized it.
10. I then updated my ipod to the new 1.2 version
11. The problem started happening again
12 I repeated what I did before and now it is working.
It was very frustrating! I hope it works for you.1

5th Gen IPOD - Won't Sync and Not Seen by Windows

Help!!!
Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

IPod touch: Seen by XP, not seen on OSX.

Strange one.
1st Gen ipod Touch with latest software(think its 3.3), latest version of itunes.
Its seen and works perfect with Windows XP.
I plug it into my Mac Book Pro, running Lion and its not seen. nothing happens wihen i plug it in.
I have reset, restored and wiped the ipod from the device itself and its still not seen.
I also tried it on a Win 7 machine and its NOT seen either.
Is this something crazy to do with 32bit architecture. Its seen on Win XP which is 32 but not by 64bit Lion and Win 7.
Any suggestions?

Have a Look Here
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Attachments and history of my emails are not seen by Windows users

attachments and history of my emails are not seen by Windows users

Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments

In my iPad mini some apps are not seen (voice recorder, calculator, compass etc)

in my iPad mini some apps are not seen (voice recorder, calculator, compass etc)er

Those apps aren't included in iOS on iPads
iPad Mini built-in apps : http://www.apple.com/ipad-mini/built-in-apps/
iPad manual (which has a chapter on each of the built-in apps) : http://support.apple.com/manuals/ipad/

BIP report security from Dashboard to Publisher is not working

Hi ,
I created a BIP report(.xdo) and placed it on Dashboard as a link . As admin , I can see the report . As a user , I am able to get into publisher but not able to see the report . Iam getting the below error message .
Error : Unauthorized Access: please contact the administrator.
I suspect that security model from Dashboard through BIP is not working . I tried searching the online resources but couldnt find right help .
Iam a newbie for BIP , I followed the regular BIP guides , configured eveything as per the docs and things work as admin . But I want to test the security as user .
Where Iam doing wrong , Any ideas please help .
Thanks
Karthik

Hello Vijay ,
I have grant permissions to the user and the report in BI webcatalog and also in BIP under admin tab I have addes the role which the user belongs to and also the shared folder . Still the problem exists.
My BI presentation servcies security is working . My user security is also working , all that I need is the user should be able to see the report when he clicks on BIP link placed in dashboard.

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

Preview and Print not seen in Actions Tab

Hi,
I could not see the preview and print option in the actions tab of the sales order, from where is it originated???
What should i do to see this.
Regards,
prasad

Guys,
My XML Publisher was not installed, Thats why this problem.
Enabled this, Issue is solved now.
Prasad

Published ASNs not seen in SNC

Similar Messages

Maybe you are looking for