Published fla file appears small on website

Hi,
I published a flash movie clip into html (using flash pro 8)
and uploaded it to the internet. When I opened the URL in IE
version 8 the flash movie clip displayed exactly the way it looked
in flash (Centre of the screen and 700Width x 400 Height). However,
after updating to flash player 10, when I now open the URL, the
movie clip I created in flash appears extremely small. Is there any
way of preventing this from occurring? Any advice would be much
appreciated. I checked the URL on a different machine with flash
player 8 installed and the movie clip appeared fine in IE but again
extremely small in firefox.

So you published first on flash player 8 and also the html, uploaded and then exported on flash player 10, uploaded just the swf and the html stayed the same?
It could be a problem of the html page being generated for an older version of flash player. Don't know but i had this problem.

Similar Messages

  • Cant Publish fla file in 2 different versions of Flash

    This is a strange one.... someone please help...
    I have tried this fla file on a couple of pcs and a couple of
    versions of flash now, version 8 and 9....
    Creating new fla and publishing them to swfs on both pcs and
    in both versions is fine, and even opening other files and
    publishing again is fine... But this one fla project i have and
    really need is not publishing to a swf file.
    You can work in the file fine add and remove stuff and work
    on it as normal, but when you publish it to a swf it produces this
    strange behaviour.
    Version 8
    You can see the swf file being created, and the file
    increases in size... the swf should be about 2mb, but this file
    just gets bigger and bigger, to about 19mb then complains about
    running out of memory, the file then disappears.
    Version 9
    Again you can see the file being created, and the file
    increases in size to about 1.3mb. but then the file disappears.
    there is no trace of it on the machine.
    It can t be related to AV or it would do this to all my
    projects????
    If the fla file is corrupt, how can it be repaird? i have
    tried doing a copy and past of the frames from one project to a new
    one, but the same results happen.... im stumped, and really need
    this fla back working...
    PLEASE HELP!!!!!!

    Yes. Just obey the correct version order or CS3 won't instal lafter CS5.5.
    Direct Download Links for Adobe Software
    Mylenium

  • Getting error when publish fla file in CS5 environment

    When I publish a "fla" a file in CS5 environment, got following error.
    ComponentShim (Compiled Clip), Line 1 5000: The class 'fl.controls.TextInput' must subclass 'flash.display.SimpleButton' since it is linked to a library symbol of that type.
    Please help with a solution.
    Thanks

    Thanks for your response..
    But didn't get much clarity from your suggestion. Hope you have deleted all button controls / components from fla file and re-create from Library..rt?
    Have any simple way to do this? In my case  around thirty controls in this fla file. So it is very difficult to delete and add the same. When we remove these controls missing th instance name also.
    Please suggest.

  • Publish fla file

    how to publish the fla file over the internet???

    You read the following HELP section for addtional assistance
    http://help.adobe.com/en_US/Flash/10.0_UsingFlash/WSd60f23110762d6b883b18f10cb1fe1af6-7bd7 a.html

  • How in Flash CS4 to change text words of .fla file from a website template?

    I have a website template in which I am trying to change the header text words and menu text words to customize the template. How do I do this in Flash CS4? Thanks!

    There are any number of ways these text elements might have been designed into the file.  So you pretty much have to search for things.  If you do not see the text that you want to change when you open the fla file, then you may need to either make some layers visible that are not (eyeball icon next to layer name) or you may need to look into the actionscript code to see if the text is being dynamically written when the file opens.  If you happened to receive any .as, .txt, or .xml files with the template, the text elements may also be defined in those files.
    Just so you know, and this is just an observation, it appears from experience in these forums that template designers tend to make templates so that you are more likely to hire them to update things than to be able to solve it yourself.

  • Trying To Add UIScrollbar To Flash Website But FLA File Has No Layers

    I was asked to add content to a flash website page... When I open the FLA file, there are aboslutely no layers for me to work with. I found an .as file that contained the page content and so I added the needed content there. But this is where I run into a problem. I'm fairly new to flash so perhaps this is common. After adding the additional content, the content now extends vertically and beyond the page borders. In doing research, I discovered that the solution is to change the TextField to "dynamic" and add a UIScrollbar during the build. I've learned to do this but the problem remains that I don't have any layers to modify for this particular website. Can someone explain why or how I can find the layers for this file? I am using Flash CS3... and unsure what version the original designer was using. I guess another option is to add a UIScrollbar to the website by modifying the .as file directly. Can this be done? Please help!

    It appears that the only items in the library are movie clips and a couple bitmaps. Here is a screenshot of my FLA file when opened in Adobe Flash: http://www.flashvideopro.net/images/flash_screenshot.jpg. Any ideas from what you see? I'm fairly new to Flash, but I have never before opened up an existing flash file for a flash website without seeing the layers for the site. Apparantly there are different ways to create flash content? Could it be that the textlayer I am looking for is hidden in a movie clip? And if that's the case would this be editable? I menitoned in my original post that I can actually edit the page in the main.as page as you see in this image. But I have no clue how to add a UIScrollbar without having the textlayer in front of me. The FLA file I am trying to edit is for global and trendy links (dot) com.

  • How can I permanently increase the size of websites?They appear small on my 1080p laptop display and I dont want to press ctrl + on every website.

    I bought a new laptop with a resolution of 1920x1080. Whenever I open sites with firefox, they appear small. I have to press ctrl++ to zoom in for every page I visit. This is getting annoying. Is there any way to permanently zoom a page so I don't have to do it for every website?
    P.S. I know that I can increase the font size permanently that that doesn't help with the images and the page doesn't render correctly.

    You can also increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to see what works best.<br />
    In Firefox 3.6 and later this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements more precisely.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • Previewed book on iPad2 appears smaller on my bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of sizing the finished product while building it in iBooks Author?

    Previewed book on iPad2 appears smaller on my Bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of normalizing the book's final dimensions for the Bookshelf while building it in iBooks Author?

    When you submit to the store via iTunes Producer, you'll have a chance to choose a cover.

  • I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

    I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

    Lalalaladog where did you download CS6 from?  I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

  • Invalid website publish settings file to import publish profile

    I am new user of Azure. I created a virtual machine through Azure's website, and ran "Get-AzurePublishSettingsFile" command to download the publish setting file. I later used VS 2012 to publish an ASP.NET website. After selecting the downloaded
    publish setting file, an error shows up saying that "Invalid website publish settings file to import publish profile".
    It should be noted that I wasn't able to find "Download the publish profile" on Azure's website itself. The Dashboard page didn't have the link to download the publish profile. 
    I am wondering what might be the cause of the error? How to fix it? Thanks for any thoughts in advance!
    lakeeast

    When running Get-AzurePublishSettingsFile, I actually downloaded the publish profile successfully. The problem is with importing the file: after selecting the publish profile in Visual Studio, I got the error ""Invalid
    website publish settings file to import publish profile".
    Did anyone else run into the same problem? 
    lakeeast

  • FLA files between Mac and PC versions of Flash CS3

    Hello, I have a PC at work and a Mac at home and have found
    that there are differences with font rendering in Flash CS3 on each
    operating system.
    I have a Flash application that looks beautiful. However, the
    same .FLA file will position fonts a few pixels differently on my
    mac.
    For instance, I can make a flash file on my PC with perfectly
    positioned fonts and after publishing, these fonts will look
    perfect on both PC and Mac (from the SWF). If I then open the .FLA
    on my Mac the fonts will be slightly off, and after publishing the
    fonts will be off on both the PC and on Mac (from the SWF).
    Has anyone else experienced this problem? Anyone got any
    suggested workarounds or am I stuck?
    This is the only major problem I've had going between the CS3
    programs on my PC and my Mac (I mainly use Dreamweaver and Flash).
    Thanks for any help!

    I have this same problem. Most fonts are vertically
    misaligned after loading a PC-created FLA on a Mac, and vice versa.
    OpenType fonts seem to have a greater baseline shift than Truetype
    fonts. Arial is one of the few fonts that doesn't shift (that I've
    tried). The direction of the shift is upwards from PC->Mac, and
    downwards from Mac->PC. Also, the linespacing changes. On the
    Mac the linespacing is reduced, so multiple lines get bunched
    together. To see this issue, create a new document on either
    platform and place some text. Draw a line at the baseline of the
    text. Save and reload this file on the other platform.
    If you make the text dynamic and click on "show border around
    text," the problem gets a little more interesting. On the PC, all
    text with ascenders and descenders appear firmly within the border.
    On the Mac, the border excludes the ascenders on OpenType fonts, so
    the text butts up right to the border and ascenders poke out the
    top. This is a bug in its own right. I work primarily with Folio
    fonts, and have seen this problem on all of the OpenType fonts I've
    tried. On TrueType fonts I tend to see the bounding box "almost"
    right, but it still just clips the ascenders, and causes a small
    baseline shift.
    I think the baseline shift problem is because the Mac version
    determines the bounding box incorrectly. When you place text using
    the text cursor, it does it according to the font's baseline, which
    is good. But I suspect Flash stores the position of the text in
    terms of the upper left (or any other) corner of the bounding box.
    Because the bounding box is calculated incorrectly (but
    consistently) on a single platform, reloading the file within that
    platform results in perfect positioning. Loading another platform's
    FLA would cause a shift because the font's bounding box is
    different -- it's the same position of the textfield, but the
    displayed text relative to that store textfield position is higher
    up on the Mac than on the PC.
    This problem has really made me regret switching to the Mac.
    have to do all my work inside Parallels now, on Flash CS3/Win,
    because the artists and other Flash developers in the office are
    all on PC. It is a total showstopper for me, and quite aggravating.
    I simply can't check in my FLAs on the Mac side with my Mac
    positioning, because it makes it impractical for anyone else to
    edit my work.

  • Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

    Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

    Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

  • Can size of images in .fla file be edited?

    The home page of our site (http://checkoutacollege.com/) uses Flash animation that was created by an agency outside of our organization. We are undergoing a site redesign and are interested in giving our Flash characters less real estate, so I am trying to determine if it is possible to make the characters smaller.  I thought I might be able to do that with the height/width attribute of the object tag in the html, but I guess that would have been too easy.  I know zip about Flash but do have CS3 at my disposal.  Is there a way within the .fla file to make the animation smaller?
    Thank you for any advice.

    then use as3.
    create a new fla with publish settings that use as3 and with stage size the dimensions you want.  then use:
    var ldr:Loader = new Loader()
    var urlR:URLRequest("yourpreviousswf.swf");  // change this
    ldr.contentLoaderInfo(Event.COMPLETE,loadcompleteF);
    ldr.load(urlR);
    function loadcompleteF(e:Event){
    ldr.width=stage.stageWidth;
    ldr.height=stage.stageHeidht;
    addChild(ldr);
    // if you need to anti-alias the loaded swf, more coding will be needed.

  • Combine two FLA files

    I have two fla files that I want to combine into one file. Is
    it possible to import one into the other?

    Hi Chris –
    I am very green to Flash, but seem to be experiencing the
    same issue that kllwca was. Since you seem to be knowledgeable in
    this area, I am wondering if you could check out a site I am
    working on which includes a Flash Gallery. (It is currently being
    maintained by a friend of the client, so I cannot guarantee the
    consistency of the design at this point.) I would like to resolve
    the conflict I am having, and then provide them with a new file.
    The gallery page can be found at:
    http://www.chasinmason.net/gallery.html
    I used a Flash Template for the gallery and modified it for my own
    use. You will see that once you pull down the film, you should be
    able to click on the small individual photos, and they should then
    appear larger in the window... I cannot figure out what I am
    missing... I am thinking it is that I have 2 FLA files. One swf
    being the file which is visible, and the other swf being the larger
    images. I would appreciate any insight you may have... Thanks!
    quote:
    Originally posted by:
    Newsgroup User
    Search this forum - it has been asked hundreds of times - but
    in short - you can combine them quite
    easily but not through import - there are 2 ways:?
    1. select all frames and layers from one flash and right
    click over them and select Copy Frames.
    Then paste them into the 2nd FLA.
    2. You can load external SWFs into a "parent" SWF at runtime
    using loadMovie.
    Chris Georgenes
    Adobe Community Expert
    www.mudbubble.com
    www.keyframer.com
    www.howtocheatinflash.com
    kllwca wrote:
    > I have two fla files that I want to combine into one
    file. Is it possible to import one into the other?

  • Scrollbar in published exe file

    Hello, can anyone tell me, of it is possible to publish a
    project to a .exe with a scrollbar?
    Because in our company there are some people with 15" screens
    and now they don't see the bottom of the full screen *.exe
    I hope there is a way to scroll within the published exe
    file.
    kind regards,
    Bill

    Welcome to our community, Bill
    First off, there is no way I'm aware of to include a scroll
    bar like that.
    Computer screens are just like TV screens. If a person with a
    21 Inch monitor views something, it simply appears larger than it
    appears on a 15 inch monitor.
    What is at play here is something called
    Resolution. While for TV screens, the only thing that really
    comes into play is the size, with Computer monitors you care about
    resolution. Resolution is how finely the divisions occur with the
    display units. These are called PixEls, which is a combination of
    Picture and Elements. So often, smaller screens use a lower
    resolution, hence the issue.
    You may wish to consider Publishing the Captivate as a SWF
    and only linking to the SWF. While that would probably impact the
    quality of the end user's experience, it should accomplish the
    goal. So instead of opening a .EXE, the user would open a .SWF in
    the browser.
    Hopefully this was helpful. If not, it was intended to be.
    Cheers... Rick

Maybe you are looking for