Published Folders Panel Issue in LR5.2 - Too Wide, Can't See Folder Arrows

I installed LR5.2 from the CC today on my Mac (10.8.4), and when I upgraded my LR4 catalog to LR5, all of my Published Folders were missing from underneath each corresponding Publish Services tab. None of the collections of photos are present. (Hard Drive, Facebook, Flickr, 500px)
However, each of the Published Services plug-ins are set correctly, and are shown to be up and running in the Publishing Manager. Also, when I try to create a new published folder underneath one of the tabs using the same name that I used in LR4, it says "That Name is Already In Use." So, LR5 knows that the folders exisit, they're just not there in the pane. Not only do I not see my old collections of published photos, I have no way adding new photos to those collections.
I tried deleting the LR5 preferences and starting over, opening up and upgrading my LR4 catalog in LR5 again, but still having the same problem. LR4 still runs fine and shows all of my published folders normally. They just don't show up in LR5.
It looks like it may just be an issue with the Publish Services pane. It's too wide to show the little black arrows at the right. (see photo below)
Anyone else having this problem? Any solutions?

At the risk of stating the obvious, did you try:
* Pulling the panel wider?
* Installing/enabling jf Folder Publisher (to get rid of the "(missing plug-in)" text (or delete the jf publish service altogether (disabling it in plugin manager won't do it)).
Note: if the panel won't go wide enough, you can widen it by adding lines like this to TranslatedStrings.txt in {lang} subfolder of 'Resources' - in with your Lr program files -
"$$$/locale_metric/Mac/Panel/maxWidth=900"
"$$$/locale_metric/Win/Panel/maxWidth=900"
~R.

Similar Messages

Display is too big, can't see the menu bar.

I have a 32" tv that i connected it to my mac pro. I see te display, but it is too big. I can't see the menu bar. I've tried changing the resolution, holding control and scrolling, and changing the display size on the tv settings. Any suggestions?

If there are no size settings on the TV that work (some TVs don't have the correct settings) see if there are Overscan or Underscan settings in the Mac's Displays system preference.

HT201774 How can. I add other folders to mt email account in my iPhone, can't see how to do this with iOS latest version

How can I add p my other email folders such as sent items and personal folders I have set up to m iPhone Mail. It's a hotmail account and I am on latest b
Version of iOS. I had them sent up on old version of iOS but the new iOS removed them and I can't see his to add then back.
Thanks,
Denise

That's not a supported function of the calendar on iOS. I believe it is because iOS syncs directly with the Exchange Server using Active Sync. I could be wrong, but I don't believe ActiveSync supports this feature (thus, it's not actually a missing feature in iOS, it's a missing feature in ActiveSync, which is a Microsoft product).
BB uses an intermediary service and does not sync directly between the device and the Exchange server.

More of a TV issue than a Fios, but I can't see my Fios TV!

HELP! So Last night daughter's TV was too loud, went in there to turn the volume down. Accidentally pushed the channel button. Now I can't get the TV to show the Fios stuff. Her TV says do a channel auto scan (which BTW comes up with no channels found). I tried changing the input and that does not work either.

Find the input select button on the TV remote and switch to the correct TV input (the one the FiOS STB is plugged into). It sounds like pushing the channel button switched to the internal TV tuner. This is how our TVs work.

Having issues with my iTunes Store account can't see all purchases and when downloading they error. Could my account be currupt

I'm having issues retrieving all my purchases from my iTunes account
When downloading it only seems to download part of the album

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
For Account issues
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

TS4526 picture on tv is too large can't see writing on sides of screen

I can't see the writing on the sides of my tv. It's a 42 in Pioneer plasma tv. No setting I have tried get the picture small enough to see the whole picture without wods chopped off the left & right sides Thanks in advance Joe

When you have tried to change settings is that via Apple TV or your Plasma?

Clipping mask issue.. simple one but I can't see it.

I want to fill the pattern into the shield.
Tried everything on this, it's so simple that I can not even see it.
Maybe it's the double lines on outline view?
Please help. Multi million dollar idea going to waste.

Kanokane,
I tried to just give a detailed list of things to do, with no explanation.
Fundamentally, you use a single path (which may be a Compound Path) as the Clipping Path of the Clipping Mask, and you select both that and whatever you have beneath it that you wish to clip.
When you apply the Clipping Mask, everything covered by the Clipping Path remains visible, and everything else becomes invisible; and the Clipping Path also becomes invisible, losing its Stroke and/or Fill (Fill in this case).
So when your shield is a rather thin Compound Path formed by the outer and the inner path, only the parts between those become visible, instead of filling the space inside.
1) is meant to keep the visible black outline formed by the Compound Path on top of everything else, and to bring a copy of either the outer or the inner path down beneath it; this is to serve as the Clipping Path; Alt/OptionClicking is to select the whole path, not just an Anchor Point or a segment.
2) is meant to bring the pattern down beneath the Clipping Path.
3) is meant to preserve the visible black outline formed by the Compound Path (by locking it) and to select the Clipping Path and the pattern (when the Compound Path is locked, you can just ClickDrag over everything and avoid selecting it), then apply the Clipping Mask.
4) is meant to have everything as a Group (consisting of the Compound Path and the Clipping Mask).
Whether you use the inner or outer path as the Clipping Path matters little; in the former case only the space inside the black rim is visible, in the latter case, the outermost part of it is hidden be the rim.

Panel sizing issues! IT'S TOO BIG FOR IT'S BOOTS!!!!!

Hi there,
I have a Panel which I make the client of a ScrollPane. The ScrollPane is added onto a container. This is all fine. My challenge is that I have about eighteen components (labels - containing pictures, text areas, etc) on the one panel. The panel is set to BoxLayout (up and down style) which results in all the components being stacked one on top of the next. When the program runs the scrollPane is fine, and it has bars both horizontally and vertically. Ideally however I only want to have vertical scrollbars and no horizontal scrollbars because I want my content to be the width of the onscreen window. If I force the scrollPane's horizontal bar off then I can only see some of the content on the Panel because the Panel still takes up heaps of room. I have learned from this that it is not possible to control the size of the component that is the client of the scrollPane by playing with the scroll bars.
I figured the only logical way to get around my challenge is to control the size of the panel before it is made the client of the scrollPane. I set the size of the Panel explicitly with setSize(value1, value2) however the Panel still takes up a huge screen area.
Basically trying to explicitly set the Panel failed, the code compiled but there was no desirable outcomes. I really want to work out how to force the Panel to be a given size and then use only one scroll bar on the scrollPane. I figure that this is an issue related to BoxLayout, but I may be well of track with that hypothesis. My code is provided below if anybody can offer any clues they will be greatly appreciated.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class HelpGUI extends JFrame implements ActionListener
HelpGUI()
    Toolkit tk = Toolkit.getDefaultToolkit();
    Dimension sSize = tk.getScreenSize();
    /* Fonts created here. */
    Font mainhead = new Font("Tahoma",Font.BOLD,22);
    Font subhead = new Font("Arial Black",Font.PLAIN,16);
    /* Images and there associated accomodations (labels) */
    ImageIcon pic1 = new ImageIcon("Images/launch1a.jpg");
    ImageIcon pic2 = new ImageIcon("Images/launch1b.jpg");
    ImageIcon pic3 = new ImageIcon("Images/launch1c.jpg");
    ImageIcon pic5 = new ImageIcon("Images/launch1e.jpg");
    ImageIcon pic6 = new ImageIcon("Images/launch1f.jpg");
    ImageIcon pic7 = new ImageIcon("Images/launch1g.jpg");
    ImageIcon pic8 = new ImageIcon("Images/launch1h.jpg");
    ImageIcon pic9 = new ImageIcon("Images/launch1i.jpg");
    ImageIcon pic10 = new ImageIcon("Images/launch1j.jpg");
    ImageIcon pic11 = new ImageIcon("Images/launch1k.jpg");
    ImageIcon pic12 = new ImageIcon("Images/launch1l.jpg");
    ImageIcon pic13 = new ImageIcon("Images/launch1m.jpg");
    JLabel icon1 = new JLabel("",pic1,JLabel.LEFT);
    JLabel icon2 = new JLabel("",pic2,JLabel.LEFT);
    JLabel icon3 = new JLabel("",pic3,JLabel.LEFT);
    JLabel icon5 = new JLabel("",pic5,JLabel.LEFT);
    JLabel icon6 = new JLabel("",pic6,JLabel.LEFT);
    JLabel icon7 = new JLabel("",pic7,JLabel.LEFT);
    JLabel icon8 = new JLabel("",pic8,JLabel.LEFT);
    JLabel icon9 = new JLabel("",pic9,JLabel.LEFT);
    JLabel icon10 = new JLabel("",pic10,JLabel.LEFT);
    JLabel icon11 = new JLabel("",pic11,JLabel.LEFT);
    JLabel icon12 = new JLabel("",pic12,JLabel.LEFT);
    //Labels containing strings.
    JLabel heading = new JLabel("INSTRUCTIONS",JLabel.LEFT);
    heading.setFont(mainhead);
    JLabel addhead = new JLabel("Adding a shortcut to the toolbar.");
    addhead.setFont(subhead);
    JLabel delhead = new JLabel("Deleting a shortcut from the toolbar.");
    addhead.setFont(subhead);
    /* Text blocks describing program operation, used in conjunction with the
    labels and images instantiated above. */
    JTextArea intro = new JTextArea(
      "This toolbar contains two established shortcut buttons. It also contains "+
      "three empty shortcut buttons. The toolbar can be customised to your exact "+
      "requirements. Please follow the instructions below if you are uncertain of "+
      "how to enter a shortcut. Alternatively you can delete shortcuts from this "+
      "toolbar by following instructions provided further down this page.");
    intro.setLineWrap(true);
    intro.setWrapStyleWord(true);
    intro.setEditable(false);
    //intro.setBackground(this.getBackground());
    JTextArea inst1 = new JTextArea(
      "1). On the File menu click New.");
    inst1.setLineWrap(true);
    inst1.setWrapStyleWord(true);
    inst1.setEditable(false);
    //intro.setBackground(this.getBackground());
    JTextArea inst2 = new JTextArea(
      "2). In the Please Enter Shortcut Details window enter a Shortcut Name "+
      "for the new shortcut.");
    inst2.setLineWrap(true);
    inst2.setWrapStyleWord(true);
    inst2.setEditable(false);
    //inst2.setBackground(this.getBackground());
    JTextArea inst3 = new JTextArea(
      "3). Click on the Open button. This presents the file browser."+
      "4). Select a relevant subdirectory and click the Open button.");
    inst3.setLineWrap(true);
    inst3.setWrapStyleWord(true);
    inst3.setEditable(false);
    //inst3.setBackground(this.getBackground());
    JTextArea inst5 = new JTextArea(
      "5). Repeat step 4 if necessary.");
    inst5.setLineWrap(true);
    inst5.setWrapStyleWord(true);
    inst5.setEditable(false);
    //inst5.setBackground(this.getBackground());
    JTextArea inst6 = new JTextArea(
      "6). Repeat step 4 if necessary.");
    inst6.setLineWrap(true);
    inst6.setWrapStyleWord(true);
    inst6.setEditable(false);
    //inst6.setBackground(this.getBackground());
    JTextArea inst7 = new JTextArea(
      "7). Select the required executable file and press the Open button.");
    inst7.setLineWrap(true);
    inst7.setWrapStyleWord(true);
    inst7.setEditable(false);
    //inst7.setBackground(this.getBackground());
    JTextArea inst8 = new JTextArea(
      "8). Press the Ok button.");
    inst8.setLineWrap(true);
    inst8.setWrapStyleWord(true);
    inst8.setEditable(false);
    //inst8.setBackground(this.getBackground());
    JButton exitbtn = new JButton("Exit");
    JPanel panel = new JPanel();
    panel.setLayout(new BoxLayout(panel,BoxLayout.Y_AXIS));
    //panel.setSize(sSize.width*14/17,sSize.height*9/10);
    panel.setBackground(Color.CYAN);
    panel.add(heading);          //"INSTRUCTIONS" heading.
    panel.add(icon1);            //First picture of toolbar.
    panel.add(intro);            //First text block.
    panel.add(addhead);          //"Adding a shortcut ..." heading.
    panel.add(inst1);            //First instruction 1).
    panel.add(icon2);            //Picture for 1).
    panel.add(inst2);            //Second instruction 2).
    panel.add(icon5);            //Picture of 2).
    panel.add(inst3);            //3). and 4).
    panel.add(icon6);            //Picture for 3 and 4.
    panel.add(inst5);            //5).
    panel.add(icon7);            //Picture for instruction 5).
    panel.add(inst6);            //6).
    panel.add(icon8);            //Picture for instruction 6).
    panel.add(inst7);            //7).
    panel.add(icon9);            //Pic 7).
    panel.add(inst8);            //8).
    panel.add(icon10);           //Pic 8).
    Container c = getContentPane();
    JScrollPane scrollPane = new JScrollPane(panel);
    scrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    //scrollPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
    c.add(scrollPane);
    setLocation(sSize.width*18/100,sSize.height*1/20);
    setSize(sSize.width*14/17,sSize.height*9/10);
    setTitle("Java QuickLaunch Toolbar");
    setVisible(true);
public void actionPerformed(ActionEvent e)
}Thanks heaps

Interestingly enough, the preferredLayoutSize method of the layout manager attached to the JScrollPane never gets called when the scroll pane is resized horizontally, only vertically. I found this out by subclassing BoxLayout so that it printed a string when certain methods were called. I did that after noticing that I can resize your help window vertically with no problem, but horizontally is a different story -- when I increase the horizontal size, the JPanel grows to fit, but when I decrease the horizontal size, the JPanel stays the same size. Returning smaller Dimensions in preferredLayoutSize of my overrided BoxLayout class didn't help.
I investigated further and subclassed JPanel to print a message when setSize or setBounds was called. When I vertically resized the help window, JPanel.setBounds was called to resize the JPanel. I was expecting that. However, when I horizontally resized the help window, the JPanel size wasn't updated... at least not in the way I expected it to be. When I increased the horizontal size past the maximum horizontal size so far, the JPanel's horizontal size was increased to match. However, when I decreased the horizontal size, the JPanels horizontal size was not decreased to match.
So, here's what I found:
1) JScrollPane vertical size increased: Scrolled component vertical size increases to match.
2) JScrollPane vertical size decreased: Scrolled component vertical size decreases to match.
3) JScrollPane horizontal size increased: Scrolled component horizontal size increases to match.
4) JScrollPane horizontal size decreased: Scrolled component horizontal does not change.
So the scrolled component horizontal size gets increased, but never decreased. This is odd... perhaps it is a JScrollPane bug? I'll see if I can't figure out a way around it. Overriding the scroll pane's setBounds and setSize methods didn't work, perhaps I'll target the JViewport next.
Sorry I couldn't help right away, though. Lemme know if you figure it out.

Can't save or publish and other issues

Aaaahhh.... I need help. I love iweb because of how easily you can just fill in the blanks and drag and drop things, but it is constantly going crazy on me.
Here is my latest issue:
1. When I try to save I get this message "Save Failed Too many open files in system" - What system? What files?
2. Why are the "Publish" and "Visit" buttons greyed out now?
3. Why can I see the "Comment" option when I am constructing my blog but not when others are viewing it and would leave a comment.- This was working fine before. Here's my blog if it helps: http://web.mac.com/ashleybrockinton/iWeb/ashleybrockintonblog/Blog/Blog.html

Do you have .Mac set to synchronize mailboxes? I don't know whether this could be part of the problem but if you use .Mac it's worth checking.
Do you keep mail messages on the server? This could be another reason. When you create a new account it might be downloading all old mail. I have my advanced settings to retain mail for only 1 week, then delete it from the server. I keep messages on my computer for preference.
I've just checked in Mail Help and for IMAP accounts the mail is kept on the server even though an account is deleted. For POP accounts it can be kept on the server too unless you have specified for it to be removed after a certain time.
Connection Doctor seems to remember all previous accounts that have been used but should indicate that deleted accounts can't be connected. I don't know which file contains this information but it will probably be in the user Library somewhere.
Neville

Subfolders disappear in the Folders panel

Periodically after working in LR5 for a while the subfolders in the Folders panel disappear. The main parent folder (my external drive) is shown with the picture count but all the subfolders are gone. When I right click on a photo and "Go to photo in Library" nothing happens - no subfolder is displayed. I have tried clicking various things in the Left Panel but nothing helps. If I Exit and then re-open LR all the subfolders are correctly displayed again. Any ideas why the subfolders disappear?

More details, example :
I delete the pics in "2010-06-13 - Carolina" (the folder which don't show up in LR3). I import again my pics. They are now here : 2010 > 2010-06 > 2010-06-13.
Then I close LR3. I open again LR3. The folder "2010 > 2010-06 > 2010-06-13" isn't here anymore. But the pics are still here (I can see them when browsing "2010 > 2010-06") !
Then again, I delete the pics. Import them again. But instead of closing LR3 now, I move the pics to "2010 > 2010-06 > Caro".
I close LR3. I open again LR3. Same as usual, "Caro" disappeared (but pics are here) !
Would someone help me please ?
Thibaud
Edit : here is a video showing the problem : http://www.youtube.com/watch?v=Ch7RuD9s2SU

Where are my publishing folders?

I opened up LR3 and several folders are missing, they are still on my HDD, but missing in LR. I imported a few again, then went to publish and most of my publishing folder are missing. The folder are still on the HDD, but not in LR. What is going on? How do I get the publishing folders back without re-creating them? and why are all my imported folders not showing? I have not moved, renamed, or changed the folders on the HDD - I literally was working without issues, then the next time I opened LR - poof, there gone.

One possibility is that you accidentally opened the wrong catalog, look under File->Open Recent
If that doesn't fix the issue, restore a recent backup of your catalog

BI Publisher -RTF Template issue: Output report not maintaining text with bullets and numberings.

Hi All,
I am currently working with generating reports using BI Publisher. My issue is that when I will preview the output(in PDF and RTF) format's of the newly created template, then, if the data coming from DB have some bullets or numbering, then the BI publisher output will ignore the same and will show the complete data as one single line.
For example if the data in the DB Field is like below:
The XYZ has the below sub-parts:
ABC : This again has two parts:
abc1
abc2
CDE
FGH
Then this data will appear as below in the BI Publisher output report's:
The XYZ has the below sub-parts: • ABC : This again has two parts: o abc1 o abc2 • CDE • FGH
I want the format of the data (with bullets and number's) should be maintained in the BI Publisher Report as well, but I am unable to find any solution for the same.
Any help on the same is much appreciated.
Deep Bhoj

in your query will u get all the columns always null when column1 is null
in your template for each group u can write like below
think G_1 as group in your xml
<?for-each:G_1[COLUMN1!='']?><?COLUMN1?><?COMMENTS?><?end for each?>
or if u are not sure u get null in both places every time u can write like below
<?for-each:G_1[COLUMN1!='' and COMMENTS!='']?><?COLUMN1?><?COMMENTS?><?end for each?>

Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

LR4 Volumes / Hard Drives not displayed in Folders Panel

I recentely upgraded to LR4.1 and it seems to have done something strange with my Folders. As you can see in the earlier version all of my harddrives are displayed as panel items in the folders panel. However now it's only displaying the boot drive and i have to drill down to the volumes folder to get to my hard drives..This is pretty annoying since i work on multiple hard drives.
I have read in earlier versions that people found a workaround by using the "Promote Subfolders" option until all drives were displayed. However this option doesn't seem to be in LR 4. None of my hard drives are compressed, and they are all internal. Can anyone offer any assistance or suggestions..
It may be worth noting that when I went to create a new catalog it didnt show any hard drives begin with.
Original Display of the Folders Panel
Current Display of the Folders Panel - as you can see only one drive is displaying.
I am running Mac Os X Lion 10.7.4, LR 4.1

This has been resolved and here's what I did...
I right clicked the top-level folder and clicked "hide this parent".
Repeated the step until all folder were gone. Yet th files still remain.
Restarted Lightroom, and Viola!! All Hard Drive Panels are now back
Thanks Dorin for pointing me in the right direction!

The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?

The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?

See the icon bar on the bottom: click on the leftmost icon to restore the left panel.

Published Folders Panel Issue in LR5.2 - Too Wide, Can't See Folder Arrows

Similar Messages

Maybe you are looking for