Published HTML5 - Clickbox won't progress with F4?

Hi Everyone,
This is a bit of an odd question. I have published a course to HTML5. It uses click boxes which also have keyboard shortcuts (e.g. either tap it, or press the key on your keyboard). One of these click boxes keyboard shortcut is the <F4> function key (to simulate how it works in our software program we are training on). However, when I try to use this to progress to the next slide in IE - it won't work (it actually makes my search bar drop down instead).
I am assuming this is an IE Browser shortcut - does anyone know how to turn this off/ or better yet, if there is a way to get this <F4> to work for my course in an IE Browser with HTML5 published content?
Thank you!
Nicole

The browser will have right of way no matter how you try to convince it otherwise. I suggest you give the user another option to indicate they know the F4 key would be what they should use in the actual application.

Similar Messages

Uploading files to SAP using HTML5 /AJAX/Gateway media links with real-time progress bar

Hi All,
Check out the blog post 'Uploading files to SAP using HTML5 /AJAX/Gateway media links with real-time progress bar'
Uploading files to SAP using HTML5 /AJAX/Gateway media links with real-time progress bar
Regards
Prabaharan

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Which correspondents fine with the
device "hw:0,3"
in my mpd.conf alsa section.
Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
hokasch:
I tried changing the mixer to "Master" but that did not change much.

My ipod touch (4th gen) won't sync with itunes, OSX

My 8gb ipod touch (4th gen) won't sync with itunes. Running itunes 11.4 on OSX 10.6.8
My touch was running fine until one day I found about 3gb occupied by 'other' space. I ended up restoring my ipod which took care of the problem, but created a new one in that the ipod will no longer sync anything from my itunes library. I have music set up to sync selected artists, and when I click the checkboxes to select my albums and artists to sync, the 'audio' bar fills up.
When I click 'apply', the 'starting sync' and progress bar pop up for like half a second then disappear. Same goes with photos, apps, podcasts, etc.

Verify that you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
Last, backup to iTunes and restore from backup, yes again

Won't boot with external display connected

My MacBook Pro (circa 1997) won't boot with the external display connected. I can connect the external display (20in flat planel) after it has started, and it works just fine.
I have tried two different DVI cables (one of which I think is a DVI-A cable) and the DVI-to-VGA cable. The result is the same.
During the boot phase I get the tone, the apple logo and the progress wheel. After 30 seconds to one minute those disappear to be replaced by an empty blue screen.

In case anyone wonders, my "solution" was to change to a WB Elements Desktop 3TB (only USB 2.0 is currently available for this model). I miss the speed of USB 3.0, but it's much nicer to not have to remember to unplug and plug in the hard drive each time I boot.
Still hoping to see a proper solution to this (since I don't have the WB My Book anymore, I can't test adaher's suggestion).

Is it possible to edit/change audio files in a published html5 file?

Is it possible to edit/change audio files in a published html5 file?

Theoretically, YES, but they would need to be in exactly the same format and have the same filename. Why would you be wanting to do this? If the new files are not the same playing length, this could potentially throw out any synchronisation with other elements in the presentation.

Does iTunes Connect Christmas break mean apps won't update with new folios over Christmas?

I have 2 folios that are due to be released to my app this Christmas - both fall within the 22nd-29th window iTunes have chosen to close down.
So even though I can publish my folios through DPS over Christmas and pre-plan my app description in iTunes accordingly - before the 22nd - will those published folios not appear in my app?
Thanks.

You mean updating a paid folio... don't know if that needs approving, too.
Maybe someone else can chime in here (I have no exp in that)
(mobil gesendet)
Am 16.12.2011 10:05 schrieb "jamie.dunmore" <[email protected]>:
Re: Does iTunes Connect Christmas break mean apps won't update with
new folios over Christmas? created by jamie.dunmore<http://forums.adobe.com/people/jamie.dunmore>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4088490#4088490>

Publish html5 file from Flash Pro CC

I subscribed Flash Pro CC and open a fla file produced by using Flash Pro CS5, It works to be tested with Control > Test Movie > Flash Professional and also successfully published to a swf and a html files. But it didn’t work to publish with CreateJS toolkit to be html5 file. A warning says
“Frame numbers in EaselJS start at 0 instead of 1. For example, this affects gotoAndStop and gotoAndPlay calls. (10)
Content with both Bitmaps and Buttons may generate local security errors in some browsers if run from the local file system”.
What should I do to solve this problem?

Thank you very much, Kglad. It seems to me that I should insert JS statemnts in the actionScript to complete the job. I don't have any experience in JS. My Fla has only "Click to certain frame of theTmeline" with the Actionscript such as
OBJ_btn.addEventListener(MouseEvent.CLICK, clickto1);
function clickto1(event:MouseEvent):void
gotoAndStop("OBJ");
Should I insert a JS in addition to this script? The JS should be inside of " /* JS..........*/" ? Do I have to learn the whole JS before I can know how to publish HTML5 from Flash Pro CC? Please help me.

Hot spots not working in IE when publishing HTML5

Hot spots not working in IE when publishing HTML5. When user points on correct hotspot, the negative feedback is given. This happens only in latest version 8.0.1.

Hello ,
Welcome to Adobe Forums !
I am also able to reproduce the issue on Internet Explorer 10.
Could you please reply with the exact version of Internet Explorer you are using?
Regards
Himanshu

I have moved my music to my new mac air but now it won't sync with my ipod or my iphone 4s

I have transferred mymusic to my new mac air from an acer laptop via an external hard drive and it's all there on the mac but now itunes won't sync with my ipod touch or my iphone 4s.
With the ipod it says 'iTunes could not connect to this iPhone. Could not connect to the device " It also doesn't show up at all in the devices section.
With the iphone it says there isn't enough space to sync even though I have experimented and unticked various things including photos which takes up a lot of space. It seems like it wants to sync with the empty space on the iphone (very small!) and not with the whole thing. I have tried various things suggested on this forum but have had no luck.

iOS: Device not recognized in iTunes for Mac OS X
Also see:
If you connect the iPod to another computer does iTunes not see it?
What version of iTunes is installed?
Whast model iPod and iPhone and what iOS version?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
For the enugh space, you are trying to sync too much media to the iPhone

Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

Specs:
iMac 10.8.5
3,4 GHz Intel Core i7
32 GB 1600 MHz DDR3
Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
I tried restart my iMac and when I was logged back in, my dock preferences were reset.
Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
When I tried opening it, it said the file was damaged and could not be openend.
I tried opening it with AE or importing the file in a new project but nothing helped.
When I tried looking for autosaves, this is the really weird part, there were none.
Even though there are autosaves from my other projects, this one was completely gone.
It looked like the day before never happened on my computer.
Also when I openend Premiere all the recent projects had been wiped.
So at first I thought it was a Premiere Pro failure.
But than, later on the day, I tried loading some RAW files from my compact flash card.
This is where I would get an error (error -36) which said some data cannot be read or written.
I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
But when I tried moving the files to an other folder the same error occurred.
While dealing with this issue I wanted to put on some soothing music on youtube.
This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
Just like my system preferences, all the preferences I had with Chrome where also reset.
Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
Some background info which could be helpful for solving this mystery:
two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
I got it replaced by a qualified apple repair store.
When I got my computer back, all the files where gone.
I got on the internet without AdBlock installed yet.
A game or whatever it was, can't clearly remember, got installed by accident.
I deleted it immediately.
Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username.
So I brought my mac back to the store.
Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
I asked him; could it be a virus? He replied no way.
I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
Could this be the work of a virus or a malware? Or is it a disk permissions issue?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Iphone 4 version 5.0 (9A334) won't sync with itunes 10.5 (141)....

iphone 4 version 5.0 (9A334) won't sync with itunes 10.5 (141)....
this message keeps popping up when I try to sync my iphone
"could not be synced because the sync server failed to sync the iphone"
anyone have this kind of problem?
googled it, and it's so confusing @.@

There is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly. I've seen lots of workarounds on the forums here. Just search for it and see if you can come up with something that works.

I have an iphone 4 that i use as an iPod. it is not connected to a telephone company. I updated to ios7 and now it won't sync with my computer

I have an iphone 4 that I use as an iPod. It is not connected to a wireless network. I have updated to the IOS 7 and now it won't sync with my computer. Does anyone know what could possibly be the problem?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

My iPhone 5 won't sync with the Nike Plus sensor

My iPhone 5 won't sync with Ike Plus sensor, new or old.

Hello bfelix,
You may need to switch 'Nike + iPod' off in your Settings, then re-enabling it. Make sure that the sensor is not in sleep mode (which can be corrected by pressing the small button on the side opposite the Nike and Apple logos). Depending on the age of the sensor, however, the battery may be depleted.
Make sure you have the latest version of... iPhone... software and iTunes installed.
Make sure the sensor is not in sleep mode by using a pen or stylus to press the Sleep/Wake button on your sensor once to wake it up.
On your home screen, tap Settings.
Scroll down and tap the Nike + iPod option.
Disable the Nike + iPod feature and then re-enable it by tapping the On/Off button at the top of the page.
Place the sensor back in the shoe and walk around to activate the sensor as you attempt to relink it to your iPod touch or iPhone 3GS.
If the issue persists and you have access to another sensor, link the new sensor to your iPod touch or iPhone 3GS. If you can link the new sensor to your iPod touch or iPhone, take in your first sensor for service.
Nike + iPod: Sensor not recognized by receiver, iPod touch (2nd generation), or iPhone 3GS
http://support.apple.com/kb/HT1587
Nike + iPod: About the sensor battery
http://support.apple.com/kb/HT1400
The Nike + iPod Sensor's battery is not replaceable or rechargeable and has a life of over a thousand active hours. The sensor has a sophisticated built-in power-management system, allowing the sensor to consume power only when active (that is, when it senses motion).
Cheers,
Allen

I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously. The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

Published HTML5 - Clickbox won't progress with F4?

Similar Messages

Maybe you are looking for