Published list of available "Monitored Attributes".

Hi all,
I am trying to create some user defined monitoring alerts. Is there a list of available "Monitored Attributes", such as CpuUsage.usagePercentage, ProcessUsage.*, etc
I have looked through the docs and can't see a list of available attributes.
In the document "Advanced User Guide - E18416" they are mentioned on page 96 and page 99 point 3b mentions "javadoc public API". No idea what that means.
Can anyone shed some light?
Cheers
Neil

Hi all,
Not to self: Install the SUNWxvmoc-sdk package and read the javadocs ;-)
Cheers
Neil

Similar Messages

Application Sudo listed in Activity Monitor - Is this a default app that should be running?

First Question:        Do other MBP users have an application Sudo listed in Activity Monitor from start up of their mac or with typical use?
Second Question:   If you have Sudo process listed in your Activity Monitor, do you also use an Huawei USB wireless modem?
Third Question:       For those experienced in relevant coding domains and given the more technical details below - your thoughts?
(Technical)
Using MBP Retina, mid 2012, OSX 10.8.4
I understand sudo is a unix root level access command.
I have used Terminal and become familiar with some basic unix commands, including using the sudo command in very limited single action command circumstances. I have not used Terminal for many weeks, and the sudo command probably twice several months ago.
Sudo showing in Activity Monitor as an active process is to my understanding an entirely different situation to it being used in Terminal. It appears the sudo process is being activated by some other application or process not of my direct use or actions.
I remain a little concerned about this in view of the purchase of this particular MBP. It has a story to it. I was told this MBP was available as new on discount as it had been purchased by a man for his wife, the wife then left him, and subsequently he returned it unused to the store.   I was aware that there was a slim risk the laptop had been used for some other activities, and returned so any come back comes back to the new owner.
I noted later with use that the MBP lower keys were sticky as if something has been spilt on them, so I do wonder if the laptop was previously used, then wiped, in which case the story presented to the retailer is likely not true and a more concerning scenario becomes possible.
All the same, I felt a clean install should remove any risk. The MBP arrived in standard ready to set up and go mode, so OS loaded but no activation. So it seemed a clean install to me.   I did not wipe the HD and do a fresh OS install from scratch. A decision I now regret.
Some months after using this new MBP, my concerns were raised when I had one day of inexplicable internet usage on a wireless internet connection. Not only did the level of data upload and data load, about 4 GB out of 20 GB for the month not make sense with actual usage, but also the MBP system logs did not tally with the internet providers accounting of usage on that day. There have been two or three other anomalies in usage since. The internet service provider reimbursed me on my evidence of OSX system logs. Not sure if the service provider has people joy riding other users accounts or something suss this end was going on. Never resolved. The ISP was not exactly forthcoming, and I had to press hard to get some collaboration on resolve the anomaly of unexplained data usage.
On the less suspicious side, the existence of this sudo program tracked down as in part coming from the install software from a Huawei modem provided by my internet provider. However, while widely used and therefore likely not a security risk, I still feel need for some better explanation and resolution of the persistent sudo process.
I have inquired to Apple Support about this sudo app running, and it apparently was not seen as an issue of concern by the front line support staff. I took up some further concerns with them but checks indicate no issues of concern with the MBP from their assessment. I trusted that as fairly likely a definitive view, and so left the questions and anomalies as unexplained but harmless.
It is now several months later and I still find the existence of sudo as a running application or process in Activity Monitor troubling, and decided to try and resolve once again how typical and for what reason it is active on my MBP. Which brings us to this post.
I have again spent a few hours searching on Google and Apple Support Forums.   All search results I find relate to the use of sudo as a unix command in Terminal to resolve a problem. I can not find any indication of sudo as an app being open routinely in Activity Monitor with or without Terminal being opened or used.
The only way I can think of to resolve if this is unusal or not is to get on this forum and ask the first two questions at the top of this post.
More technical details follow.
For some more technically minded the details may be of interest, hence below here I have added details for further comment.   I am hoping some MBP users on this forum may also be coders, and hence have some idea of the internal mac coding environment. Enough to shed some light on this situation.
As mentioned, I think the sudo Activity Monitor may originate from the running of the Internet Providers USB Wireless Modem and software (Huawei E 169? modem). The USB modem has the install software on it. You install that software on your HD as an application.
On this USB Wireless Modem front I have done some checking.
Killing sudo in Activity Monitor does not stop an internet connection mid session.
When the USB modem is removed, the sudo process remains running and listed in Activity Monitor.
If I remove the Modem icon, unplug modem, close all apps, restart without the modem connected, the sudo process is still loaded and running in Activity Monitor.
Months ago on a previous check if I deleted (uninstalled) the modem software, removed associated start up files installed by the modem installation, took out the USB Modem and did a restart, there was no return of the sudo process in Activity Monitor. When the modem software was reinstalled or the start up files restored directly, the sudo process returns to Activity Monitor. One of the software bits installed in start up files calls sudo (or so it appears having a peak in BBedit at the files.)
This seems to fairly much establish the source of the sudo application. However it does not resolve why it needs to be open all the time, and if this is unique to this modem, my modem, modems in general, or if permanent running sudo processes are fairly 'normal' in general. Since sudo is a root level access process, I do feel a little concerned of the situation.   Let's say the sudo process is needed to initiate the modem under some justification. Does the sudo process in remaining running permanently from there on, with or without the USB modem connected leave an open access way and vulnerability that can or is used later?   i do not know enough of the coding level architecture to form a view.   Still, seeing a permanent sudo process operating does niggle by sense of suspicion.    Hence, I continue to raise this issue and ask the questions I do.
In Activity Monitor:
sudo as a process when running is not very active.
Real Mem 8 KB, Virtual Mem 9.4 MB, Sent Msgs 75, Rcved Mesgs 26, Ports 25, Intel (64 bit).
The sudo process:
Using Sample Process in Activity Monitor:   sudo appears to be a running of the actual sudo command from within the unix command files.
Path:            /usr/bin/sudo (Master Library, not the one in the User files)
Load Address:    (removed)
Identifier:      sudo
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: launchd [1]
Call graph
2nd line is 2656 start (in libdyld.dylib) + 1 [(removed)]
Binary Images:
Includes reference to lots of .dylib files. eg libcache.dylib, libquarantine.dylib, libremovefile.dylib, libcompiler_rt.dylib, libcorecrypto.dylib
The parent process is launchd[1]
Process:         launchd [1]
Path:            /sbin/launchd
Load Address:    (removed)
Identifier:      launchd
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: ??? [Unknown]
It seems all of the activity of launchd[1] is from the sudo process.
Again reference to .dylib files as captured in call graph and Binary images.
I hope the details are valued by someone with an interest to assist with resolving concerns.

Thanks,
I usually use the OS connection option. So as you suggest, connect without the ISP connection software. Doing so does not by-pass the sudo command being active in Activity Monitor however.
On reading my post I see my failure to link the concerns of the laptop purchase with the sudo and modem. My thought here is of an intersection of known vulnerability with this widely used modem/software (via permanent sudo process activated) and that vulnerability then being known and utilised by another party(s).
I am pursuing the issue in part with consideration to a broader possible issue of vulnerability.
Thanks again for your thoughts and suggestions. Valued.

Custom playbar does not display in the list of available widgets

I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
Thanks,
Peter

Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

Publication is not listed in reolication monitor after manual database failover

Hi All,
I have three servers using which I have configured database mirroring and transactional replication with pull subscription.
ServerA--Publisher/Distributor/principal
ServerB--Subscriber
ServerC--Mirror
After failover now ServerB pulls the data from ServerC which is the new Principal andI have set the -PublishfailoverPartner as ServerC .
After the failover is performed I see subscriber is pulling transactions from ServerC and transactions are getting replicated but I cannot see the publication listed under new publisher(ServerC) nor under old publisher ServerA from replication
monitor.
What is the reason I cannot see the publications from replication Monitor. How will distributor know that ServerC is now the publisher.
Also I got the error when I executed below command for distribution agent. But still transactions are getting replicated after failover.
exec
sp_add_agent_parameter@profile_id
= 4,
@parameter_name =
N'-PublisherFailoverPartner',
@parameter_value =
N'ServerC
Msg 21806, Level 16, State 1, Procedure sp_MSvalidate_agent_parameter, Line 63
parameter -PublisherFailoverPartner. The value must be an integer. Verify that replication is installed properly and that sp_add_agent_parameter is invoked with a valid value.The agent profile creation process cannot validate the specified agent parameter
value: the profile_id 4 does not exist or it does not support the
Any inputs will be of great help.
Regards,
Raj
Raj

Refer to this: http://msdn.microsoft.com/en-us/library/ms151799.aspx

External lists for updating marketing attributes

Hi,
I'm now working in CRM 3.1, but we're going to upgrade for 5.0 in the autumn. In this relation I'm working on a pre-project where I'm looking for the possibilities for using external lists for updating marketing attributes on existing BPs. How can I map this fields? Do I use advanced mapping fields or structure enhancement using appended fields?
Thanks, Camilla

Camilla,
Yes, this function become standard for CRM 5.0. CRM5.0 ELM provide different format types for create BPs (with marketing attributes), activities and leads. You need to define different format type when you create mapping format. For updating marketing attributes, you need to choose type "Business Partner" type so that all the marketing attributes will be available for you to pick to create the mapping format.
You can look at the CRM5.0 release note and document for more details
Regards,
Min

NWA Availability monitoring problem

With NW04s at SP8 I have an ABAP+J2EE system that is my Central Admin/Monitoring system. I have setup CCMSPING in central system and also in RZ21 of the ABAP system. I verified the systems are showing in RZ20 with green/100% indications.
When I go to set them up in NWA, I see them listed with yellow warnings next to them in the availability monitoring screen. When I scroll down and click 'enable availability monitoring', I get a message at the top "SYSTEM_ALREADY_MONITORED".
Why might it be telling me that, even though the metrics are not showing up in the NWA?

Hi Dave,
if you don't see the availability of monitored instances in the central reports, then you'll probably don't see it in the transaction RZ20 as well. Is this correct?
If so, did you check the following documentation?
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/9e100dd7980fffe10000009b3810a5/frameset.htm
and another source of information that might help (SAP Tutor, so make sure that the SAP Tutor player is installed on your computer):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/a-c/availability%20monitoring%20and%20ccmsping.sim
Kind regards
Dirk

How do I create a list of available times?

I frequently receive emails asking me when I'm free for a meeting. I'd like to reply with a list of available times between specified dates. How do I do this with existing Mac software or commercial products? I've seen such listings from Outlook.
Desired output:
This Thursday I'm free:
8:00 am - 9:00 am
2:00 pm - 3:30 pm

Alex573 wrote:
... I need to create a list ... , where I can add each item to the list individually, automatically, and without there being transitions for the entire list each time I add something to the list.
that needs in a simple 12€ consumer-app some craftsmanship ...
(and no, no automatics)
• create your list in Keynote (or any other text or paint app ... or ppt ....)
• save it as a jpeg
• erase one 'line'
• save it again
• repeat steps until one line left
=> you get a couple of stills
iM would allow to add those to your project; add a simple transition => lines 'appear'
if you need the text overlaid to a video, use the the well-known 'transparent png' trick (then, the new line has to appear with a hard cut.
to inspire you, read my (old) advice - it's shown with iMHD6, but the 'mechanics' is same.
https://sites.google.com/site/karstenschluter/accents
my website explains the png-trick too (does work in vers11) ...
https://sites.google.com/site/karstenschluter/imovie09tricks
maybe, you get inspired by the subpage about 'using Keynote for a vid-cast production'
https://sites.google.com/site/karstenschluter/how-to-make-a-vidcast/keynote

XP Pro Windowsw/Fonts has a font. It is listed as available in MS Word. It is not listed as available in Adobe Illustrator CS6. How do I fix this? Thanks.

XP Pro Windowsw/Fonts has a font. It is listed as available in MS Word. It is not listed as available in Adobe Illustrator CS6. How do I fix this? Thanks.

BobbyH5280. Very helpful answer! I am XP for the next week on CS6. I did find 3 items that helped. The fonts are in AI, but are listed on the bottom of the list. Also in Edit/Preferences/Type, checking "Show Font Names in English" makes the font list easier to read (doesn't appear to change the sort order though), and (with your suggestion) checking "Sow Asian Options" might do something positive. Thanks to all of you who sent in tips.

ICal - iPhone sync. Local calendar not showing up in iTunes list of available calendars, only Exchange calendars.

iTunes only shows Exchange-calendars in the list where you can choose which calendars (we're talking about "calendars", not "accounts") you want to synchronize. If I add a local calendar in iCal, I can not choose it to synchronize with my iPhone. It simply doesn't show up in the list of available calendars. How does iTunes compile this list of available Calendars to synchronize?

Hi Zachary,
Here is an article I'd suggest to troubleshoot this situation:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
You may only need to go through the steps with one device and have it resolve for the others.
Cheers,
- Ari

Where can I get a list of available selection for certain dict type?

Where can I get a list of available selection for certain dict type in code? For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria. One of them would be "VBTYP_N". When I click on the square next to the option, I am presented with a list of possible values to select from. Where can I get the list of this possible values for any given dict type in code?

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

Availability monitoring using ccmsping - refresh rate

So I've configured my solman 3.2 to monitor the availability of other systems via the use of ccmsping. I can see the other systems well enough, but the problem is the long time it takes for my solman system to become aware that a monitored system is no longer active.
It can easily take 20 minutes for it to report that a system is unavailable. When I say "report", I mean that the status is updated in the 'Availability and Performance Overview' monitor in RZ20.
Even then, the only evidence visible is that the 'Availability' alert changes colour due to the % availability over the last 15 minutes. The other alerts for Groups and Instances simply turn white because no information is coming from the child system.
SAP help and the document "Availability Monitoring with CCMSPING.pdf" advice that monitoring frequency can be changed by changing the parameter values for the CCMS_AVAIL_LOGON_CHECK method. I have changed these values, which have had no apparent impact on the response times for noticing that a system has become unavailable.
Any suggestions?

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

List of available webservices that we use in XI

Hi,
I have been asked to provide the list of available webservces that we can use in SAP XI. Can some body give me the list of sap related webservices ?
Appreciate your help .
Thanks
Suds

Hi,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0904cbd-b47f-2a10-b689-f1d683c2285c
/people/anilkumar.vippagunta2/blog/2006/12/13/secured-webservices-ii
Thanks,
Vijaya

JEE MP: Authoring JEE Application Availability Monitor

Hi experts,
We've imported the JEE WebSphere MP's, completed discovery, enabled deep monitoring, and now have some issues authoring custom "JEE Application Availability Monitoring".
In the wizard on the "MBean to Monitor" screen we use the MBean name:
WebSphere:j2eeType=JDBCResource,*, as we'd like to monitor some JDBC Connection Pool stats.
On the next screen in the wizard, "Health State", we select the xPath:
MBeans/MBean[@Name="javax.management.modelmbean.RequiredModelMBean" and @objectName="WebSphere:J2EEServer=server1,Server=server1,cell=APPT75WASCell01,j2eeType=JDBCResource,mbeanIdentifier=cells/APPT75WASCell01/resources.xml#builtin_jdbcprovider,name=Derby
JDBC Provider (XA),node=APPT76WASNode01,platform=dynamicproxy,process=server1,spec=1.0,type=JDBCProvider,version=7.0.0.25"]/Properties/Property[@Name="stats" and @type="com.ibm.ws.pmi.j2ee.JDBCStatsImpl"]
The problem we have is that ALL of the stats and counters are found within this single Property, as seen below:
Current value:
Stats name=Derby JDBC Provider (XA), type=connectionPoolModule
Stats name=jdbc/DefaultEJBTimerDataSource, type=connectionPoolModule
name=CreateCount, ID=1, description=The total number of connections that are created., unit=N/A, type=CountStatistic, count=6
name=CloseCount, ID=2, description=The total number of connections that are closed., unit=N/A, type=CountStatistic, count=5
name=AllocateCount, ID=3, description=The total number of connections that are allocated., unit=N/A, type=CountStatistic, count=2306
name=ReturnCount, ID=4, description=The total number of connections that are returned to the pool., unit=N/A, type=CountStatistic, count=2302
name=PoolSize, ID=5, description=The size of the connection pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3568935E7, lowerBound=0, upperBound=30
name=FreePoolSize, ID=6, description=The number of free connections in the pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3485336E7, lowerBound=0, upperBound=30
name=WaitingThreadCount, ID=7, description=The average number of threads that are concurrently waiting for a connection., unit=N/A, type=RangeStatistic, lowWaterMark=0, highWaterMark=0, current=0, integral=0.0
name=FaultCount, ID=8, description=The number of connection timeouts in the pool., unit=N/A, type=CountStatistic, count=0
name=PercentUsed, ID=9, description=Average percent of the pool that is in use. The value is based on the total number of configured connections in the ConnectionPool, not the current number of connections., unit=N/A, type=RangeStatistic, lowWaterMark=93,
highWaterMark=100, current=0, integral=278663.0
name=UseTime, ID=12, description=The average time in milliseconds that a connection is used. The difference between the time at which the connection is allocated and returned. This value includes the JBDC operation time., unit=MILLISECOND, type=AverageStatistic,
avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9, type=TimeStatistic, avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9
name=WaitTime, ID=13, description=The average waiting time in milliseconds until a connection is granted., unit=MILLISECOND, type=AverageStatistic, avg=0.0, min=0, max=0, total=0, count=0, sumSq=0.0, type=TimeStatistic, avg=0.0, min=0, max=0, total=0,
count=0, sumSq=0.0
name=PrepStmtCacheDiscardCount, ID=21, description=The number of statements that are discarded because the cache is full., unit=N/A, type=CountStatistic, count=3
name=JDBCTime, ID=22, description=The average time in milliseconds that is spent running the JDBC calls, including the time spent in the JDBC driver, network, and database. (Applies to V5.0 data source only.), unit=MILLISECOND, type=AverageStatistic,
avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0, type=TimeStatistic, avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0
So then how do we configure Expressions for Health State at this point in the Wizard, if we have such a long string value containing ALL of the stats? Anyone have insight into this?
Thanks!

Hi experts,
We've imported the JEE WebSphere MP's, completed discovery, enabled deep monitoring, and now have some issues authoring custom "JEE Application Availability Monitoring".
In the wizard on the "MBean to Monitor" screen we use the MBean name:
WebSphere:j2eeType=JDBCResource,*, as we'd like to monitor some JDBC Connection Pool stats.
On the next screen in the wizard, "Health State", we select the xPath:
MBeans/MBean[@Name="javax.management.modelmbean.RequiredModelMBean" and @objectName="WebSphere:J2EEServer=server1,Server=server1,cell=APPT75WASCell01,j2eeType=JDBCResource,mbeanIdentifier=cells/APPT75WASCell01/resources.xml#builtin_jdbcprovider,name=Derby
JDBC Provider (XA),node=APPT76WASNode01,platform=dynamicproxy,process=server1,spec=1.0,type=JDBCProvider,version=7.0.0.25"]/Properties/Property[@Name="stats" and @type="com.ibm.ws.pmi.j2ee.JDBCStatsImpl"]
The problem we have is that ALL of the stats and counters are found within this single Property, as seen below:
Current value:
Stats name=Derby JDBC Provider (XA), type=connectionPoolModule
Stats name=jdbc/DefaultEJBTimerDataSource, type=connectionPoolModule
name=CreateCount, ID=1, description=The total number of connections that are created., unit=N/A, type=CountStatistic, count=6
name=CloseCount, ID=2, description=The total number of connections that are closed., unit=N/A, type=CountStatistic, count=5
name=AllocateCount, ID=3, description=The total number of connections that are allocated., unit=N/A, type=CountStatistic, count=2306
name=ReturnCount, ID=4, description=The total number of connections that are returned to the pool., unit=N/A, type=CountStatistic, count=2302
name=PoolSize, ID=5, description=The size of the connection pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3568935E7, lowerBound=0, upperBound=30
name=FreePoolSize, ID=6, description=The number of free connections in the pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3485336E7, lowerBound=0, upperBound=30
name=WaitingThreadCount, ID=7, description=The average number of threads that are concurrently waiting for a connection., unit=N/A, type=RangeStatistic, lowWaterMark=0, highWaterMark=0, current=0, integral=0.0
name=FaultCount, ID=8, description=The number of connection timeouts in the pool., unit=N/A, type=CountStatistic, count=0
name=PercentUsed, ID=9, description=Average percent of the pool that is in use. The value is based on the total number of configured connections in the ConnectionPool, not the current number of connections., unit=N/A, type=RangeStatistic, lowWaterMark=93,
highWaterMark=100, current=0, integral=278663.0
name=UseTime, ID=12, description=The average time in milliseconds that a connection is used. The difference between the time at which the connection is allocated and returned. This value includes the JBDC operation time., unit=MILLISECOND, type=AverageStatistic,
avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9, type=TimeStatistic, avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9
name=WaitTime, ID=13, description=The average waiting time in milliseconds until a connection is granted., unit=MILLISECOND, type=AverageStatistic, avg=0.0, min=0, max=0, total=0, count=0, sumSq=0.0, type=TimeStatistic, avg=0.0, min=0, max=0, total=0,
count=0, sumSq=0.0
name=PrepStmtCacheDiscardCount, ID=21, description=The number of statements that are discarded because the cache is full., unit=N/A, type=CountStatistic, count=3
name=JDBCTime, ID=22, description=The average time in milliseconds that is spent running the JDBC calls, including the time spent in the JDBC driver, network, and database. (Applies to V5.0 data source only.), unit=MILLISECOND, type=AverageStatistic,
avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0, type=TimeStatistic, avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0
So then how do we configure Expressions for Health State at this point in the Wizard, if we have such a long string value containing ALL of the stats? Anyone have insight into this?
Thanks!
I'm using the latest JEE MPs and SCOM 2012 R2, however I don't show the stats as a property on this MBean.

Not Able to see SAP systems in List of Available SAP Systems for Crystal R

Hi All,
We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
How to Add SAP systems to this list.
Thanks,
Chindam Praveen Kumar.

1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
ingo

What is the transanction code to list the available transanction codes

what is the transanction code to list the available transanction codes

Hi,
Use transaction SE93. This will show all transactions in SAP and you can test them with this tran too.
Regards
Wayne

Published list of available "Monitored Attributes".

Similar Messages

Maybe you are looking for