Published motion template slows down FCPX
Hi, I have published a simple snow effect made in Motion 5 to FCPX. Every time I try to add the effect to a clip in FCPX, it slows down everything and I get the beach ball spinning. If I switch off the effect everything goes back to normal. What is the deal? Ant suggestions?
One more thing, I have an Imac 10.6.8 early 2010 2.8 i7 8gb. FCPX uses all the ram available when rendering, etc. I thought that you need only 4gb as minimum req. Do I need more ram? I just use it for simple videos, I'm not a pro, but at times it gets really annoying when the imac slows down.
Thanks,
Andrea
It depends on what the Motion template is doing. If it's doing a lot of work, which is very easy to make a Motion project do, it will grind things down. The minimum specs of FCP X are for doing minimum work. I'd never touch FCP X, and especially Motion 5 with anything less than 8GB RAM. But more important is the graphics card you're running. What card are you running?
Similar Messages
-
How to slow down FCPX titles in motion?
In FCPX I can slow down the tiles motions by dragging the tiles out.
But that does not always help.
So I try to use Motion to slow down the typing tile in FCPX. I get it to work by doing this:
But in FCPX the clip is too long. The speed is ok, and the text in the title behaves beautiful, but when the motion text is finished typing the clips is still too long and empty.
By shortening it by dragging it will of course effect the speed of the typing again.
Guide anyone?Found the answer here:
Re: Speed of text in typewriter generator
https://discussions.apple.com/message/18153728#18153728 -
Motion 5 Template Publishing Not Showing Up in FCPX
I did a clean install of Lion 10.7.1 and a clean install of FCPX and Motion 5. For some reason, when I publish a template/generator/effect from Motion 5, it does not show up FCPX unless I restart FCPX. When I first started using both Motion 5 and FCPX, as soon as I switched back to FCPX, the published template was there.
I've repaired permissions, restarted the computer, etc. Why won't this work any more? Any ideas?Mark Spencer answered this for me on another forum. This is a known Lion bug. Doesn't happen in Snow Leopard. Just an inconvenience, but hope it's fixed soon.
-
Hi all
I have some Gopro 120fps footage which I want to slow down
I imported the clip to fcpx dropped it into to the timeline (30p rate) and then thought that i could retime it 50% or 25% and then get smooth slow motion slowed down to 1/2 or 1/4.. but its not working ?
What am I doing wrong here ?
Thx
Dennis HansenFirst, select the clip in the timeline and from the retiming menu select automatic speed (I'm assuming a current version of the app). See how that looks and then apply a speed change. Activate the retiming bar in the timeline (Cmd-R) and drag the tab at the end to adjust the speed.
-
How to publish Motion 5 templates with another editor's Final Cut Pro x
How to publish Motion 5 templates with another editor's Final Cut Pro x
That's also simpel,
Let the Motion 5 designer deliver the map that he made. For example he made a title effect with the title "We Are Awesome Company Title" than you get that map after the head "Effects" map. So he must send that map with all the stuff in it to an editor and the editor place that map in Motion Templates -> Effects.
Restart Final Cut Pro X and there you go. -
In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks
I have a revision a imac g5 with the same problem with only macbreak podcast. I know leo laporte said that the podcast was done in 1080p and my computer with its built in 64 megabyte graphics card might have trouble with this podcast but your machine must have a better graphics card than mine. 1080p requires at least 128 megabytes of graphics memory built in. My machine played this podcast on quicktime fine until they came out with the update to quicktime last week or two ago. I was going to upgrade my memory until I came accross your story and your machines doing the same thing with much better specs. I think it might be the quicktime update that is causing a problem. Maybe Leo will talk about this problem since he is doing a mac show about macs.
-
How to Publish Motion 5 templates
How to publish motion 5 templates to to another editor's Final Cut X project?
Basically I want to have one motion 5 designer built templates for use with other Final Cut X projects on other systems.That's also simpel,
Let the Motion 5 designer deliver the map that he made. For example he made a title effect with the title "We Are Awesome Company Title" than you get that map after the head "Effects" map. So he must send that map with all the stuff in it to an editor and the editor place that map in Motion Templates -> Effects.
Restart Final Cut Pro X and there you go. -
Is there a way to import a Motion template in FCPX, IF you DON'T have Motion on the computer.
I am working with another editor that has FCPX, but not Motion. I created some lower 3rd templates in Motion that I would like him to use. Is there any way to import motion5 templates in to FCPX if the user does not have the Motion application?
The titles you made in Motion are located in your movies folder. the path is ~/user/movies/Motion Templates/Titles. Your other editor needs to create that file path in his machine and then drop your titles in the Titles folder and FCPX will see them. ie He needs to create a Motion Templates folder and a Titles folder inside of it and then drop in your title folders. Make sure the folders are correctly named and I believe they are case sensitive. Just duplicate what you see in your movies folder.
-
Speed up / Slow down video in Motion?
Hi I have motion 2.1 and am wondering if there is a way to speed up or slow down a video in motion. I have a video where I want the people to move to the beat of the music playing in my project.
Thx in advance.Thanks It was actually really easy to find the speed I wanted. (People are already dancing in the clip just slow). I just opened the file and went to the modify menu and went down to speed and found the speed I wanted.
But, having never used FCP much I am stuck trying to save the clip so I can use it in motion.
When I go to the file menu it has everything greyed out except "export" which only allows "quicktime conversion" option.
I tried using that and it only exported the audio. The video was blue screen.
I guess i'm asking...
How do you save or export a movie after speeding it up in FCP?
Thx for any assistance. -
How do you make Motion templates availabe for all users for FCPX?
How do you make Motion templates availabe for all users for FCPX?
Copy your Motion Templates folder that is in your Movies folder to the movies folder of your other users.
-
Motion slows down to beachball
Hi all. Have had this problem since I bought my 27" iMac 3.1Ghz i5 with 12GB RAM. I'm working happily in Motion4 when it starts slowing down gradually until the dreaded beach ball of death kicks in. Have to restart the application and it's happy for some time while I work and then starts slowing down again. Never had this before with my other Macs including my MBP. Anyone with some suggestions that will save me the time of restarting every 15 min?
nafmo wrote:
Hi!
I have a 2006 MacBook (Core Due 2 GHz), which I have upgraded to Snow Leopard (via Leopard). I am trying to use the built-in camera ("iSight") for video chat, but when I do, the computer slows down to a crawl, and the application that is using the camera takes all CPU.
I've tried with both iChat and Skype, and the result is the same, so it seems to be in the camera drivers and not the applications themselves.
Does anyone have any good ideas on what I can do to alleviate the problem? I have not installed any specific drivers for the camera beyond what comes with Mac OS.
Hello nafmo
Snow Leopard's iChat 5 does require more CPU power than iChat 4 (from Leopard), so you may, in part, be noticing that. The best way to verify that is with your Mac's Activity Monitor utility. For your comparison, my new 2.26GHz Core2Duo MacBook Pro uses slightly more than half of both cores for Snow Leopard iChat video chats.
Here are some other things you can consider:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8496.html
We will watch for your status update.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
Looong render times with motion templates
I've been a big advocate for FCPX as there are a lot of great features but there are some things that are just killing me, no.1 render time.
I'm working on some simple presentation edits using motion templates I have built in motion 5 and published to fcpx. The templates all consist of a single dropbox for video with a type field for test messages next to it. These are against a flat white rectangle used to reflect (similar to the coverflow but against a white background) and a subtle camera sweep has been added so it slowly turns from one side to the other by 30 degrees. Each of these is 10 seconds long.
I chop up my imported movie on the timeline (untouched by grade/fx/retiming) and add the template to each of the chopped clips. I then select each applied template in the timeline and use the video well to select the clip below it for the dropzone. I add my text. That's all good. I now have a timeline approx 3 minutes long consisting of these motion graphics templates.
Now, if I chose to either render or export a QT with timeline settings, estimated time is 8 - 9 hrs (I have tried both) I left a 3:30 project exporting last night at 11:45. It finished at 9:00AM.
That is just unacceptable. It is irritating because the functionality of building the sequences in FCPX far outweighs what FCP 7 is capable of but the so-called "renderless" abilities of FCPX
are making life ****.
I use Event Manager X to turn off everything I am not using except the individual project. I have reset preferences in Preference Manager to see if that helps. I have purged using terminal. I have my clips on an external firewire 800 HD. I have no other software running. I accept I need a more powerful Mac - I'm using a 2009 3 Ghz Intel Core Duo iMac with 6gig ram using Lion 10.7.2 and FCPX 10.0.2 but 9 hours for a 3:30 clip?
Any suggestions for where I can cut down on render time are appreciated. The source clip for the video for the dropzones and the final exported presentation movie are HD ProRes.
CheersThe situation you describe does not seem normal. It should not take nearly that long to render and export your 3:30 movie. Considering that your mac is not one of the most recent vintage, and your are editing in full HD, one could expect it to take a bit of time, but nothing like this.
In the way of troubleshooting, you could try and export just one of these 10 second segments.
I have no way of knowing for sure, but I guess that it might export in a much more reasonable amount of time.
I suspect that memory may be running scarce, which, as has been repeatedly mentioned in these fora, is a problem affecting many of us using FCP X under Lion. You mentioned you used "purge" in the Terminal, but in such a long render you might have had to do it repeatedly... -
Import MP3 and AIF Audio Slowing Down
Hello All,
I am trying to create a podCast of my Temple's weekly service. The sound system saves the audio to a Compact Flash as a MP3 file. I had wanted to use GB3 to add graphics and publish with iWeb but I am having a strange problem.
When I add the existing sound file to a new podCast template, the audio slows down about 5-10%. I've tried to add the file through iTunes/Media Browser and I have tried converting the file to an AIFF in QT7 then drop-and-drag to a new track. In both cases the slowing of the audio acquired.
I tried adding additional new audio via internal Mic and it plays normally. I have a iMac G5 with 1GB RAM...so I don't believe it's my compture.
Help! Please!
Thanks in advance for suggestions and solutions...
DavidIf it slows and drops in pitch:
http://www.thehangtime.com/gb/gbfaq2.html#toofast -
Publishing Site template problems
Has anyone come across this. Can you offer some insight.
A site collection administrator has created a new site using the Publishing site template.
Not long after the site is created, all sites under that web application slows down. At first all users noticed the problem. However, after a while it only affects other site collection administrators and farm administrators. Other users don't see a problem.
We deleted the site and the issue went away.
After some testing we found that she could create the site with the blank site template and this didn't cause problems.
Another post was very helpful. It suggested that there was a problem with the draft version of the default.aspx. But why would it work with the blank site template?
Does anyone have any suggestions on how we can troubleshoot this.
The logs don't show very much. The only thing that led us to the problem was that the site kept showing up in the logs when i turned on verbose logging. I was going to try fiddler but I haven't been very successful using this in the past. Does anyone else
have any ideas.
LSTalbotHi,
As the web application stopped working after creating the publishing site, there might be some issue caused this case.
Could you please check the event log and ULS log to see if anything unexpected occurred?
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Timer Class not accurate and slows down my animation!?
Does anyknow how why my timer object is not accurate and why it slows down my animation that is also present on my GUI at the same time?
I have a timer in the form of 0.00 the left of the decimal point should represent a second but it doesnt, run my code and see for yourselves. below is my code if anyone can fix these 2 problems i will be very thankfull:
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Shape;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
import java.sql.*;
import java.text.*;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel, coJLabel, shJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;
public JComboBox colourJComboBox, sizeJComboBox, shapeJComboBox, speedJComboBox;
private static Connection dbcon;
int temp=0;
private String[] col = { "Red", "Blue", "Green","Yellow","Orange","Black"};
private String[] shapeA = { "Normal Rectangle", "Normal Circle", "Normal Oval","BIG Rectangle", "BIG Circle","BIG Oval","small rectangle","small circle", "small oval"};
private String[] speed = { "Fast", "Normal", "Slow"};
public int checking;
static int flag, flagshape, flagspeed;
// creates and sets up a number of varibles to be used by the class
public long timeLimit = 0;
DecimalFormat timeDec = new DecimalFormat (":00");
public int age;
public String name, shapeChoice="Normal Rectangle(Never selected anything)", colourChoice="Black(Never selected anything)";
private Timer TimeNow;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
Random seed;
Shape shape;
Shape[] shapes = {new Rectangle2D.Double(50, 30, 75, 25),new Ellipse2D.Double(175, 125, 50, 50),new Ellipse2D.Double(90, 100, 75, 35),new Rectangle2D.Double(50, 30, 175, 125),new Ellipse2D.Double(175, 125, 125, 125),new Ellipse2D.Double(90, 100, 175, 135),new Rectangle2D.Double(50, 30, 55, 15),new Ellipse2D.Double(175, 125, 20,20),new Ellipse2D.Double(90, 100, 55, 15)};
//50, 30, 75, 25 change starting point here****************************************
public RT() // constructor method
seed = new Random();
shape = shapes[0];
//sets up the Timer
TimeNow = new Timer((1), new TimerListener());//++++++++++++++++++++++++++timer -17
createUserInterface(); // method that creates the user interface
private void createUserInterface()
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbcon = DriverManager.getConnection("jdbc:odbc:CMT3991", "", ""); // Access/ODBC
//connection ash used to connect to the user table in access
} catch(Exception eee)
eee.printStackTrace(); //exception if error occurs during the driver connection
System.out.println("* UserDA CONNECTED *");
}).start();
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME - PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
// loginJButton.setVisible(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
// showJButton.setVisible(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "CHOOSE A NUMBER OF OPTIONS AND GET READY:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
coJLabel= new JLabel();
coJLabel.setBounds( 70, 40, 530, 35 );
coJLabel.setText("Choose a colour:");
helpJPanel.add( coJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
colourJComboBox = new JComboBox( col );
colourJComboBox.setBounds( 70, 70, 135, 21 );
colourJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( colourJComboBox );
colourJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
colourChoice="Black";
int x = colourJComboBox.getSelectedIndex();
if( x == 0)
flag = 1;
colourChoice="Red";
else if(x == 1)
flag = 2;
colourChoice="Blue";
else if(x == 2)
flag = 3;
colourChoice="Green";
else if(x == 3)
flag = 4;
colourChoice="Yellow";
else if(x == 4)
flag = 5;
colourChoice="Orange";
else if(x == 5)
flag = 6;
colourChoice="Black";
shJLabel= new JLabel();
shJLabel.setBounds( 340, 40, 530, 35 );
shJLabel.setText("Choose a shape and size:");
helpJPanel.add( shJLabel);
shapeJComboBox = new JComboBox( shapeA );
shapeJComboBox.setBounds( 340, 70, 135, 21 );
shapeJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( shapeJComboBox );
shapeJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xshape = shapeJComboBox.getSelectedIndex();
//shapeChoice="Normal Rectangle";
if( xshape == 0)
{ flagshape = 1;
shapeChoice="Normal Rectangle";
else if(xshape == 1)
{ flagshape = 2;
shapeChoice="Normal Circle";
else if(xshape == 2)//**********here
{ flagshape = 3;
shapeChoice="Normal Oval";
else if(xshape == 3)
{ flagshape = 4;
shapeChoice="BIG Rectangle";
else if(xshape == 4)
{ flagshape = 5;
shapeChoice="BIG Circle";
else if(xshape == 5)
{ flagshape = 6;
shapeChoice="BIG Oval";
else if(xshape == 6)
flagshape = 7;
shapeChoice="small rectangle";
else if(xshape == 7)
{ flagshape = 8;
shapeChoice="small circle";
else if(xshape == 8)
{ flagshape = 9;
shapeChoice="small oval";
/* speedJComboBox = new JComboBox( speed );
speedJComboBox.setBounds( 10, 150, 135, 21 );
speedJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( speedJComboBox );
speedJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xspeed = speedJComboBox.getSelectedIndex();
if( xspeed == 0)
flagspeed = 1;
else if(xspeed == 1)
flagspeed = 2;
else
flagspeed = 3;
System.out.println(flagspeed);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
// startTestJButton.setVisible(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
} // end method main
* action listener for TimeNow Timer
private class TimerListener implements ActionListener
public void actionPerformed(ActionEvent event)
timeLimit ++;
if (timeLimit==100)
temp++;
timeLimit=0;
timerJTextField.setText(String.valueOf(temp +""+timeDec.format(timeLimit)));
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are.");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
// System.out.println(""+ seed.nextInt(shapes.length));
//shape = shapes[seed.nextInt(shapes.length)];//****************************
if (flagshape==1)
shape = shapes[0];// changed colour here***************************
else if (flagshape==2)
shape = shapes[1];// changed colour here***************************
else if (flagshape==3)
shape = shapes[2];// changed colour here***************************
else if (flagshape==4)
shape = shapes[3];// changed colour here***************************
else if (flagshape==5)
shape = shapes[4];// changed colour here***************************
else if (flagshape==6)
shape = shapes[5];// changed colour here***************************
else if (flagshape==7)
shape = shapes[6];// changed colour here***************************
else if (flagshape==8)
shape = shapes[7];// changed colour here***************************
else if (flagshape==9)
shape = shapes[8];// changed colour here***************************
// shape = shapes[8];
System.out.println(shape.toString());
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
infoJTextArea.setText("");
TimeNow.start();
* called by animation panel after shape is clicked
public void stop()
TimeNow.stop();
movingObject();
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
TimeNow.stop();
//timeLimit;
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
System.out.println("shape used: "+shapeChoice);
String mouse = infoJTextArea.getText();
String tick = timerJTextField.getText();
timeResultsJTextField.setText(tick);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter("Backup_of_"+name+"s_results.txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("THIS IS A BACKUP");
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The Shape and size was: "+shapeChoice);
printstream.println("It's colour was: "+colourChoice);
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(temp<5.00)
ratingJTextField.setText("Thierry Henry");
else if(timeLimit<=10)
ratingJTextField.setText("Average");
else if(timeLimit<=15)
ratingJTextField.setText("You gotta be fat or something");
else if(timeLimit<=20)
ratingJTextField.setText("See a doctor");
else if(timeLimit>20)
ratingJTextField.setText("DO YOU KNOW WHAT YOU DOING!?");
String rate=ratingJTextField.getText();
try
Statement st = dbcon.createStatement();
String cmd = "INSERT INTO users (Name, Age, Time_Taken, Rating, Mouse_Movement,Shape_and_Size, Shape_Colour) VALUES ('" + name + "' , " + age + " , '" + tick + "' , '" + rate+"','"+ mouse+"','"+ shapeChoice+"','"+ colourChoice+"');";
//creates a SQL statement and executes it
st.executeUpdate(cmd);
st.close();//close the statement
} catch (Exception eDA)
eDA.printStackTrace();
private void showData()
// pretend this takes awhile -> 3 seconds (count)
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
}).start();
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
timer = new Timer(-20, this);
host = rt;
/* if (rt.flagspeed==1)
timer = new Timer(-20, this);
else if (rt.flagspeed==2)
timer = new Timer(20, this);
else if (rt.flagspeed==3)
timer = new Timer(100, this);
//change speed here******************************
x = 0;//0
y = 0;//0
dx =2;//2
dy = 3;//3
//setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
if (RT.flag==1)
{g2.setPaint(Color.red);// changed colour here***************************
else if (RT.flag==2)
{g2.setPaint(Color.blue);// changed colour here***************************
else if (RT.flag==3)
{g2.setPaint(Color.green);// changed colour here***************************
else if (RT.flag==4)
{g2.setPaint(Color.yellow);// changed colour here***************************
else if (RT.flag==5)
{g2.setPaint(Color.orange);// changed colour here***************************
else if (RT.flag==6)
{g2.setPaint(Color.black);// changed colour here***************************
xfoI'm (being lazy and) using the older RT app posted on your last thread. I removed the
TimeNow timer from the RT class and used System.currentTimeMillis (as you requested) to
determine the elapsed time during the animation (see "startTest", "stop" and
"movingObject" methods). Also changed the DecimalFormat to NumberFormat and set the
"maximumFractionDigits" to "2" so it will truncate the fraction to two digits (more simple
than before). Made arrangements for the ShapeMovingPanel class to update the
"timerJTextField" during the animation (RT.updateTime method).
The MouseMotionListener is causing the animation to appear jerky and uneven. The
"mouseMoved" method is very busy while the mouse is moving. You might consider recording
the "mousePressed" events instead of the "mouseMoved" events, ie, the events where the user
is attempting to click inside the moving shape. It would allow the app to be more
responsive and might eliminate the uneven motion of the animating shape.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;;
// creates and sets up a number of varibles to be used by the class
private long startTime;
private long endTime;
public int timeLimit = 0;
public int age;
public String name;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
NumberFormat timeDec;
Random seed;
Shape shape;
Shape[] shapes = {
new Rectangle2D.Double(50, 30, 75, 25),
new Ellipse2D.Double(175, 125, 50, 50),
new Ellipse2D.Double(90, 100, 75, 35)
public RT()
timeDec = NumberFormat.getInstance();
timeDec.setMaximumFractionDigits(2);
seed = new Random();
shape = shapes[0];
createUserInterface();
private void createUserInterface()
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME -PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "HELP DETAILS:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
// this is causing the animation to appear uneven
// you can try the app with and without this to see
// testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( EXIT_ON_CLOSE );
} // end method main
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
shape = shapes[seed.nextInt(shapes.length)];
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
startTime = System.currentTimeMillis();
infoJTextArea.setText("");
* called by animation panel after shape is clicked
public void stop()
endTime = System.currentTimeMillis();
movingObject();
* called by timer actionPerformed in ShapeMovingPanel
public void updateTime()
long timeNow = System.currentTimeMillis();
double elapsed = (timeNow - startTime)/1000.0;
timerJTextField.setText(timeDec.format(elapsed));
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
double elapsedTime = (endTime - startTime)/1000.0;
timeLimit = (int)elapsedTime;
timeResultsJTextField.setText(timeDec.format(elapsedTime)+" seconds");
String mouse = infoJTextArea.getText();
String tick = timeDec.format(elapsedTime);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter(name+".txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(timeLimit<5)
ratingJTextField.setText("Thierry Henry");
if(timeLimit>5)
ratingJTextField.setText("Average");
if(timeLimit>10)
ratingJTextField.setText("You gotta be fat or something");
if(timeLimit>20)
ratingJTextField.setText("See a doctor");
String rate=ratingJTextField.getText();
private void showData()
// String results = "";
// infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
host = rt;
timer = new Timer(25, this);
x = 0;
y = 0;
dx = 2;
dy = 3;
setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
// update RT.timerJTextField
host.updateTime();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
g2.setPaint(Color.red);
xformed = at.createTransformedShape(shape);
g2.draw(xformed);
public void start()
if(!timer.isRunning())
timer.start();
public void setShape(Shape s)
shape = s;
Rectangle r = shape.getBounds();
x = r.x;
y = r.y;
repaint();
private class ShapeTender extends MouseAdapter
public void mousePressed(MouseEvent e)
if(xformed.contains(e.getPoint()))
timer.stop();
host.stop();
}
Maybe you are looking for
-
What's wrong with this trigger?
hi! i am creating a trigger that calls a procedure, it showed the following message. what's wrong? SQL> create or replace trigger phang.t2 after logon on portal30.schema 2 begin 3 call phang.dob; 4 end; 5 / Warning: Trigger created with compilation e
-
Got "wifi: no hardware installed" Problem
this problem had troubled me from 10.6 Snow Leopard to 10.7 Lion iMac 27" (late 2009) to be honest my wifi (airport) can work just fine BUT when I "restart" my iMac everytime when I needed (system upgrade or something) and when I bak to the system it
-
Payment and request only in Vendor Currency
Dear Gurus, In my vendor master (XK03) my currency for vendor is USD . What I want is whenever I made down payment request (F-47) or payment (f-48) it should only allow USD (currency in vendor master) ,not any other currency.Please sugg
-
Unable to create or remove VLAN
I'm unable to create or remove any VLAN on my cisco switch... C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA6 Error: APP-SW-LAN-CISCO-#5(config)#no vlan 10 Error on initialize VLAN database 1: VTP feature not yet initialized when i give "show
-
Google Maps on Iphone Question
Hey everyone, got a question here. I heard that Google Maps can send traffic reports, as in when I start a route it could tell me which roads are jammed and offer alternative routes. Is this true? If so how do I do it and is it available to do on a U