Published page not working propoerly on some browser

some friends reported soem dead links
and some picture folders (the new feature from iLife 08) non-selectable either.
of course all work on my mac both on safari and explorer.
where does the problem come from?
is it an update isse for these guys?
some java applets needed?
thanks to help me fixing this asap

The wireless channel in use by the router will change as it strives to find the clearest channel. Have you tried going into the router settings and fixing the channel in use ? The best channel to use can be found with "inssider", which is used to scan all available channels, and shows you the ones least congested.......
It may also be that the "lease time" for your connections may need increasing......?
If you found this post helpful, then please click the star on the left, after all, I'm only trying to help........

Similar Messages

"Edit" Button on Publishing Page Not Working

I have a publishing site which has been upgraded from 2010 to 2013 and if I click the "Edit" button in the top right or in the ribbon nothing happens. If I check the page out first then the buttons work. The expected behavior is that it should
check the page out as part of the edit operation and I see this working fine on other publishing sites that are virtually identical to the ones that are failing. When I compare the source of the pages of one that does not work and one that does work I see
that there are a few key differences:
sp.ui.pub.ribbon.js and sp.publishing.resources.resx are loaded on the site that is working but not the one that is failing
JavaScript variables such as pullPageVariation, l_ur_plsWait, l_ur_rfct, etc., are defined on the page that works but not the one that fails.
A JavaScript block which adds functions such as PublishingRibbonUpdateRibbon(), EnsurePublishingConsoleActionScripts(), etc. is loaded on the site that works but not the one that fails.
There are other differences but I believe these are the relevant ones. In reflecting some code that handles the Edit button I can see that this missing pieces are key but I've not been able to determine why they're missing. I've looked at the delegate controls
that are registered for AdditionalPageHead and there is no difference from the site that works compared to the site that doesn't. Note that I also found that the same exact site upgraded in two different environments (dev and production) had different results
- one worked, the other didn't. Taking a backup of the site that was not working and restoring over the one that was (prod -> dev) resulted in dev now replicating the failure so I don't believe it's a farm specific thing but rather something about the content.
I reactivated all site collection and site features in case there was some odd issue with that and that made no difference.
Looking at the upgrade maintenance logs there was an error when attempting to activate the Translation feature which resulted in the PublishingSite feature having an incomplete upgrade status. Running the upgrade cmdlet again resulted in a successful upgrade,
at least according to the logs.
I'm at my wits end as to why this is not working and I would definitely appreciate any insights folks might have.
-Gary
Gary Lapointe, Blog: http://blog.falchionconsulting.com/, Twitter: http://twitter.com/glapointe Aptillon Inc.: http://www.aptillon.com

try this link:
https://social.technet.microsoft.com/Forums/office/en-US/f62ea03d-b272-473a-a663-79938d3fbea4/edit-page-button-not-working-in-publishing-site?forum=sharepointadmin
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Login page not working in EBS R12 after autoconfig.

Hi,
We are using EBS R12 on windows 2003 server 32 on a test machine. As we were making some changes using autoconfig,
as the Login page not working in EBS R12 after running autoconfig.
Kindly help us.
Thanks in advance.

Hi,
Rollback the changes and run AutoConfig, see if you get the same error or not then -- See (Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12) for details "2.5. Rolling Back an AutoConfig Session".
Regards,
Hussein

Adobe CC Education Eligibility Page Not Working!

I work for a university and bought the educational version of CC. When I clicked the link in the email provided by Adobe to upload verification of my employment... I filled out the form and when I click the button at the bottom that says "Review and Submit" I get a page not found error. Someone at Adobe please help!

Different regions may have slightly different processes. Take a look at the following document: http://helpx.adobe.com/x-productkb/policy-pricing/education-faq.html
I hope that this will help you get going.
If you still get that Page Not Working error, try the same with a different browser and check.

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Is the update page not working for of our devices.

Is the update page not working for apps? I cannot get it to load with any of our devices. iPhones or iPads?

There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/

Some of the BI publisher UI not working

/*This was a browser issue*/
Hi, I am using bi Publisher integrated with OBIEE 11.1.1.6, and there are a couple of things that aren't working within the tool and I was wondering if anyone has encountered these.
1) When I go to the "Get XML Output" screen there is a little drop down image next to the ‘Return’ button on the right-hand top where I should be able to select the option of ‘Save As Sample Data’.
2) If a data model contains a list of values the LOV drop down does not work on the "Get XML Output" screen.
Edited by: Chumpski K on Nov 28, 2012 6:46 AM

Hi @jellomoto,
Welcome to the HP Forums. I see that you are having a problem with the middle row of keys on the keyboard. You have already done all the troubleshooting that I would have suggested. You are looking at either backing up your data and doing a System Recovery or giving us a call regarding a repair. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Some of my bookmarks are not working in my safari browser after dl of snow leapord, do i need os x moutain lion and maveriks?

Bookmarks are not working properly, example: bank of america, and lumosity. How do I download OS X Maveriks if I just downloaded snow leopard?

First of all make sure your download is complete. If you bought the disk that gave you Snow Leopard, it would probably have been 10.6.3. That means you need to download and apply the 10.6.8 Combo updater and do some software updates too.
Mac OS X 10.6.8 Update Combo v1.1
Then check that your machine is capable of running these higher OS's
Apple - OS X Mavericks - Read the technical specifications.

Move to first page not working

Am using DW CS3 and for some weird reason the "move to first
page" under the recordset paging is NOT working. It doesn't do
anything.
I have the right text highlighted, the right recordset chosen
and nothing.
All the other paging options work just fine. The move to next
page, the move to previous page and the move to last page ALL work.
The first page option doesn't, no code is inserted.
Should be putting in a link for that anchor text to move to
the first record, but isn't.
Any ideas? Anyone else with this?
Thanks,
Robert

I f you are publishing to .mac, then this is often a caching issue, either at the server end or at your end, the nav bars seem to get messed up and time tends to heal (not what you wanted to hear).
You could try clearing the cache in you browser, in Safari, go to Safari > Empty Cache.., also putting a ? at the end of the url in the address bar and then refreshing the page often does some good. Often you need to do both, more than once!
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

Published SWFs not working from CS3 on Mac?

This one REALLY has me stumped..
I am working on a Mac Dual 2-Gig G5 running OS 10.4.10 and
Flash CS3.
I have a web site for a client posted (
http://www.aronwiesenfeld.com
). This site has been running flawlessly for over a year published
to Version 8 Flash Player AS v2.0. This client asked me to create a
new temporary splash page last night that would announce his new
Art Show and then click on into the main site. This site uses a
Shared Lib, a SharedTrigger, a Core SWF (containing the main site
navigation elements and handles loading of various movies into
levels) and a Splash SWF (that contains the two splash screens and
initial navigation to areas of the site. The problem I THINK I am
having is in the Splash SWF... or is a problem with my LOCAL Mac
installation? When I click one of the 5 Site Nav buttons it is
supposed to tell the main core movie to advance to a new frame (20)
and I target that movie by referring to _level0. This has worked
fine for the past year (on this and other sites). I am attaching an
example of the code used on each of the initial Nav buttons in the
Splash swf .
So here is the mystery...
When I "Test Movie" inside Flash CS3, everything works/looks
"perfect". If I then go to the desktop and find the generated HTML
file and open it in Safari (both version 2 and 3-beta), or Firefox
or Opera, etc., everything looks fine until I click one of the
initial text Nav Buttions. At that point it takes me to the main
site and loads the external SWF into a level as it should
(indicating that the 3rd line of code on the button is execution
and by the fact the the Splash movie disappears, it indicates that
the core movie is indeed moving to frame 20 (_level0) as requested
in the first line of code. However, all of the main site navigation
buttons along the bottom of the main site as well as the background
NEVER APPEAR? Also when I start to move the mouse around the loaded
external movie the site completely crashes and I get a blank screen
- IN ALL BROWSERS whether I am launching the site from my hard
drive or the Internet!! But it works perfect INSIDE Flash CS3.
Now comes the real kicker...
Just for the heck of it after spending 3 hours trying to fix
this on my main G5 tower(publishing to Player version 9, etc.), I
decided to try accessing the site from my old G4 laptop. Ready for
this? The site appears to be working perfectly IN ALL BROWSERS ON
MY G4 also running 10.4.10!!!
So my guess is maybe their is a problem with the Flash Player
Plugin in all my browsers on my G5 or the Flash Plugin has a
problem with OS 10.4.10 only on my G5. BUT, even if I launch this
site directly in Flash Player from the desktop on my G5 it does not
work - so the stand-alone player is having the same issue - yet it
works fine on my G5 INSIDE of Flash CS3.
I thought I had seen it all the last 5 years with Flash, but
this one has be completely stumped!
My client emailed me from California and said the site was
working fine there of his PC. If that is true then I am having a
LOCAL Flash Player problem on my G5 running 10.4.10.
In addition to my question, if anyone can give me feedback as
to whether or not this site is working on your machine/browser/OS,
could you please let me know? You will know if the site is working
if you click on Enter Site, then click on any of the 5 buttons
(except Info) and you see a grey background behind the image and
the lower navigation string appears.
Thanks!

Well after trying everything I could think of I started down
the list again. I re-downloaded the Flash Player 9 r47 Mac
installer and ran the installer again (which I also did last night
with no success).
This time after re-installing the plugin - ALL THE BROWSERS
IMMEDIATELY STARTED WORKING ad the site now comes up fine - so,
apparently I had a bad Flash Player install in my browser!

Edit link not working in IE 10 browser after fetching 5000+ rows

Hi,
OBIEE 11g 11.1.1.7.150120
IE 10
We have an issue where IE browser misbehaves after fetching 5000+ rows. By misbehaves, I mean the browser responds extremely slow while scrolling up, down, left, right. Worst behavior is the "Edit" link on the report does not work. There is no action! If I navigate to the my home page and try to edit some other report/analysis, same -- no action. I am able to run other reports but cannot edit any one of them. Edit link does not work for any report going forward. If I log-out properly, close the browser window and log back in, only then am I able to edit reports.
I tried clearing the browser cache several times but this keeps happening.
This issue is specific to IE only, not Firefox or Chrome. However IE 10 is the corporate browser and switching to any other browser is not a solution.
Has anybody faced this issue? Any help in troubleshooting will be greatly appreciated.
Thanks.

Hi skull,
Just to make it simpler ... don't start touching your settings for java heap memory or your account setting to define the default tab when editing an analysis as they have no link with your issue.
Setting the criteria tab .... well ... as you can't click the edit link you will never get till the criteria tab, so it will not help you a lot (but it's good to set it in case you often edit huge analysis with tons of rows as it doesn't fire a query every time you open it).
For the java heap memory I can't really see how Chrome or Firefox would behave in a different way on a server side setting like that one.
So to avoid having multiple other nice issues later don't change settings around without being sure 100% it will have an impact on what you are debugging.

For years FF has worked beautifully with Constant Contact. Now sevear function in CC will not work in the FF browser - they work in all other browsers. Help

Until one week ago, I had no difficulty or problems working Constant Contact while open in my Firefox browser. Now I have several with some functions in CC not working.
Inserting images, setting hyper links, changing background color - These are three necessary functions that I use in Constant Contact emails that no longer function when opening CC in Firefox browser - latest update was today 10/29/2013.
The function work in the Chrome and Internet Explorer browsers.
I have contacted Support at Constant Contact and the issue is not with their program.

Hi eaglegrafix, try disabling ALL nonessential or unrecognized extensions (i.e., anything you don't think you'll need for 24 hours) and see whether that solves it. You can do that on the Add-ons page:
orange Firefox button (or Tools menu) > Add-ons > Extensions category ''(in the left column, click Extensions)''
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that help narrow it down?

Slideshow on 7 of my 8 pages not working

I recently added 2 new pages to my iWeb site. I had some difficulty publishing at first and got a message that I had lost internet connection. I tried to publish a few times and finally got the pages published. When I tested the site everything looked great. I sent the email to announce the updates (I added more pictures to the previous 6 existing pages as well. The next day I received responses that the slideshows were not working. After re-publishing and attempting to change little things, I still am only able to get the slideshow to work on one page.
-The slideshow that IS working is "Tyler Bennett: 11/05
-Example of error message for other page slideshow: Safari can’t open “tyler:%20Dec%2005%20into%202006_files/slideshow.html” because Mac OS X doesn’t recognize Internet addresses starting with “tyler:”.
**I have always had these pages up and have never had an issue until I added the June and July pages.
Can someone help me?
Powerbook Mac OS X (10.4.7)

The reason why the colons are still there is because they have never been a problem in the past. Curious why the slideshow works perfectly fine on my first page where a colon exists still. I sampled one page by taking the colon out and it worked. I thought about taking the colons out earlier, but since they were never an issue, I eliminated that right away. Anyway, thanks for the help!

Router web page not working

My dad has a WRT54GS that we can't get the WEP key set. We can get onto the router site but when I click on the wireless tab it goes to an empty page. I thought it may be popups so I turned all that stuff off but it didn't work. Can anybody help me? Thanks

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

IWeb published "page not found"

I've created a site in iWeb 2, published to a folder on my desktop & uploaded it to A Small Orange's web servers using Cyberduck. But when I try to view the site with either Safari or Firefox, I get the dreaded "404 page not found" message.
Tech support at A Small Orange is not especially helpful & said "The problem is that your index.html redirects to a file welcome.php in the RobertsFine_ArtPrints folder. the welcome.php files does not exist."
I asked what can be done about this & they said "If the files were generated by IWeb then you need to ask them why your files are not setup properly.
Im sorry but there is no way that we can give you code that we do not have. This issue lays with your your site is coded."
Any ideas what I'm doing wrong?
Thanks,
Robert

I replied only to Ethmoid's response not to the entire thread, as I should have. My bad.
Here's my reply to your replies:
I uploaded the folder Robert Wells Fine Prints, which contained both the index.html file and the Robert Wells Fine Prints folder created by iWeb when I published. In Cyberduck, I uploaded them to the public_html on Small Oranges servers.
I uploaded the whole RWFP folder created by iWeb all at one time.
Ethmoid asked: "How did you manage to get a php file when iWeb does not support this? If you have created your site in iWeb, you welcome page should be Welcome.html and nothing like php."
I have no idea how I did this, but it looks like I screwed it up pretty good. Could it have anything to do with the fact that at some point in this process (not sure when) I changed the site's name. Originally, I was going to call it Robert's Fine Art Prints, but that got changed to Robert Wells Fine Prints. Though I have no idea if this has anything to do with my current problem.
Things have gotten worse. Thinking I did something wrong & could fix the problem by re-uploading, I deleted the files from the server and tried again. Now, most of the image files are failing to upload in Cyberduck.
Chuck Usher asked "When you publish to a folder I believe you get a folder and a separate index.html file. did you up load both and address the index file? What is the site address? "
Yes, you get an index.html and a folder of supporting documents. I uploaded both at the same time. The address is supposed to be robertwellsfineprints.com but it doesn't work.
Thoughts appreciated.
Robert

Published page not working propoerly on some browser

Similar Messages

Maybe you are looking for