Published site - text moved, text spacing inconsistent

I am very new to Adobe Muse, so go easy on me. I created a first site using Muse. In design view, all seems to be fine. When I published the site to Business Catalyst, text included on the top of the page moved up above other text. In design view, it is fine, only when published.
Also, on one of the panels of an tabbed panels used in the site, the spacing of the text is not correct. The text appears as several paragraphs with headings that are different sizes from the content of the paragraphs. The first paragraph looks great. Paragraph two, three, and four have too much space between the lines of text. I had problems changing the font sizes of the headings, this seemed to occur after the issue with the font sizes.
Below is the design view with text in place and text spaced appropriately.
Below is the published view shwoing text with address information moved from its place in design view. It published above the company name. Also the spacing difference in the paragraphs two, three, and four on the right of the panel.
Any help to resolve will be greatly appreciated
Note: I attempted to post screen captures of the issues, but would not post with questions. Again, any help to get them onto the post would be appreciated.

Sorry it took me so long to reply. I have screen captured what I reported in my post. Below are the two different captures, the first one is the published image from Business Catlyst. Note the address information is above the company name.
Below is a capture from Design view from within Muse showing the correct placement of the text. Also, please note the difference in the text spacing in the paragraphs from Design view to the published view. I have reviewed the settings, but cannot determine how to publish to the spacing is the same in parargraphs two, three, and four.
Thanks for your help.

Similar Messages

How do you create animation on website i.e. i just want to create a simple moving text in my site.

I just want to create a moving text or a flashing text in my website using iWeb. HELP!

See the bgcolor= ? That's the background color. In the iWeb color inspector window chose the web safe color palette, and you will see the number codes that correspond to the colors. just type in the numbers you want and that will change the background color.
Sincerely, David

How to create a moving text in APEX forms?

Hi
Can anyone help me with the procedure and the code for creating a moving text in APEX.
Thanks in advance.

marquee was introduced with IE (Internet Explorer) and certain versions of Firefox, Opera, Chrome and Safari web browsers support it.
tell me how do you want the text to work. the easiest way will be to create an HTML region and put the marquee tag code in it
if you fear about the compatibility of marquee with browsers or have a browser version with which marquee does not work then use JQuery
check the following
http://plugins.jquery.com/marquee/
let me know if this answers your query in the current thread
Regards,
Vishal
Oracle APEX 4.2 Reporting | Packt Publishing
Vishal's blog

Text moved when pdf is optimized

I am having a problem with text moving so that some letters overlap and others are spaced far apart when I optimize a pdf using Acrobat XI Pro on a Macbook Pro. The text is Times New Roman font. What can I do to fix this?

Hey Susan,
Could you please let me know if you are running the latest patch of Acrobat XI i.e. 11.0.10
Does this happen with any particular PDF that you try to optimize?
Try using any other font in the PDF and then check.
Let me know.
Regards,
Anubha

Publish Transparent to Opaque Text

I am new to Flash and am trying to do the following:
Motion tween with text. Moving text from pt A to pt B and
from transparent/invisible to opaque. I am doing this in one layer
with a movie imported that plays in another. When I play it back in
flash it looks fine. I have converted the text to a graphic symbol
too.
When I publish the fla to swf and play back the text tween,
say in a browser, the tween movement is there, but not from
transparent to opaque. It remains opaque the entire time. What am I
doing wrong?
Thanks!
bmgid

I converted the text to a graphic symbol so I could create
the transparency percentage. Can I do a transparency to opaque
tween w/text not converted?
Thanks,
bmgid

Text moving when opening a pdf in illustrator

I opened 2 separate hi res pdfs (the front and back of a postcard) in illustrator 5.1. The type on both sides had been outlined and we just relinked the background image on both sides after we did some color adjustments to it. The only type on the front was the name of the company and the headline. Both were white type in separate magenta bars. The type was centered both horizontally and vertically in each bar.
When I opened the front, the headline text moved from being centered horizontally on the pdf to EXACTLY flush right with the company name. There were no problems with the text moving on the back side.
We have been receving files from this client for several years and always make color adjustments due to the uncoated paper stock we print on and have never encountered this before. The original files that the supplied pdfs were made from were also created in illustrator 5.
Is this a known issue? If not, is it acrobat or illustrator problem.

Was the original PDF created in Illustrator? To find out, open the PDF in Acrobat and go to File> Properties, it should show you what program created the PDF. Illustrator is not a universal PDF editor. A safer work flow would be to use Edit Object in Acrobat to make your color corrections. If you decide to use Illustrator, go to Select> All text objects, I suspect there are some un-outlined and un-embedded type elements.
If the fonts are properly embedded, there is almost no reason to outline the type.

Text box tool spacing in acrobat 9

Hello,
We recently upgraded to Acrobat 9. I have a document that was created in adobe 8 which has several text boxes. Now in acrobat 9 when i make a change in the text box(add/remove text) and click outside the text box all spacing goes away. Everything becomes single spaced. I have tried using ctrl+enter and shift+enter to see if spacing is retained but i get the same result.
The funny thing is that i tried to create a text box from the forms menu instead of Tools>comment and markups>textbox tool and i was able to retain spacing on the same document. So it seems to be working as a form but not as a comment or markup. Is there a setting i am missing? Or is this something that was changed when going to adobe 9?
Thanks,
Andy

That is due to a bug in Acrobat 9 where multiple carriage returns get replaced by a single one. It's still present as of 9.4.0, but I'm not sure about more recent updates.

Weather widget text moved UP

I noticed recently but only really investigated today. The text on my weather widget has all moved up about 5-10 pixels from where it should be. The temperature listing is now sticking about 5 pixels outside and above the background. It looks like the same font and I haven't gotten rid of any fonts lately. I don't know if this is related to 10.4.5 but I noticed it around the time of the upgrade. Any ideas for troubleshooting? Very strange issue.

Yes i have logged out, restarted, refreshed the widget. It's not just the weather widget now. I see that the address book widget is different, my iCal calendar widget has its text moved up, and goodness knows which others. I orignally asked this question on another forum and others reported having the same problems. I wonder if copying the widget from a computer not experiencing this would make a difference. It's really just the text.
You know how when the weather widget is loading the temperature has the - - where the numbers are about to appear... those are in the correct position. As soon as the numbers and other text loads it's significantly higher than those - - would suggest.

Matreial Number/Part number sits on short text column instead of Mat# colum

Hi Experts,
When i am createing a PO for repair or warranty, Part number sits in short text column instead of Material number column.
Tcode ME21N....not sure why.
Please suggest if its a config thing or can be solved in ABAP...
Thank you in advance.
Regards,
Sharat

Cofiguration! i'm not Sure(As an ABAPer).
Any Exit/Enhancement/Customer Modification were Ever implemented ,for ME* transaction?

PO for repair or warranty. Poblem: Part number sits in short text cloumn!!

Hi Experts,
When we create a PO for repair or warranty part number sits in short text column instead of Material number column.
Please suggest if its a config thing or can be solved in ABAP...
Thank you in advance.
Regards,
Sharat

not getting any answers here so putting this question in ABAP forum
Thanks for seeing
Sharat

I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work eve

I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work even when i try to change the font on the content tab, nothing. I have reinstalled firefox still no luck help,!!!!!
== This happened ==
Every time Firefox opened
== this month ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.2)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

IWeb published site different than designed

I scrolled through numerous pages and was surprised I did not see this problem already described.
I design a simple (though long) page using iWeb. Text and images only. The images are embedded, but non are overlapping. It looks great as I am working on it in the iWeb window. I publish it to a folder on my laptop then view either by using "visit published site" or going to the directory and firing up the index.html. There are lots of problems - images have been moved, fonts are wrong (there looks to be a "format persistence" problem -- a type or size will continue for a few extra words. I edit, making sure the fonts are the ones I want and re-publish with the same poor results. Not very WYSIWYG at all! I'd try to edit the html code, taking the iWeb written stuff as a pretty good start, but it is not very pretty html.
So, at this point iWeb is a completely useless program! As many others are using it without this problem, there must be some solution. Anyone had this issue and found a way to fix it?
thanks

What is the web address of the published site so we can see what you are referring to?
While waiting for that:
A common reason why formatting on a published page will not match what you see in iWeb is that objects (pictures, movies, text boxes, etc.) are overlapping. When the web browser goes to try and interpret that overlap the results can vary (this can effect the display of fonts as well).
Go to the page in question in iWeb and click on 1 object. Go to Edit > Select All.
You will see all the objects on the page with their boundaries activated. Move any items that are overlapping so they have their own space around them.

Webpart page in a publishing site

I have a Sharepoint 2013 on premise environment. Does anyone know how to add a webpart page or add the functionality so that it’s a little easier and more consistent?
Here is an article outlining how one might add a wepart page but my issue is that even when I go to the sitepages library and hit add new document from the files tab, webpart page is not available?
I am working in a publishing site and would really like this page type back. My users do not like the new page layout and prefer the old webpart page options.
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2012/11/05/how-to-create-a-web-part-page-in-sharepoint-2013.aspx

Under page layouts I have "site can use any page layout" The problem that I am having is that this site was created as a publishing site. It seems when a site is created as a publishing site (as opposed to creating a teamsite and enabling
the publishing feature) you do NOT get the same options when creating a new page.
On the Publishing site when I create a page, I get one big column which my users can edit. Under the "Page" tab in the ribbon menu we have the option to adjust the "Page Layout" which seems to offer some options but does not function
like the old webpart page where you can adjust columns . The options listed here are a bit limited and overly complicated for my user group.
On the Teamsite, with publishing enabled, when I create a page I also get one big column that my users can edit. under the "Page" tab there is NO page layout button. Under the Format Text tab there is a "Text Layout" button.
This is what my users are looking for. This button gives my users the ability to quickly and easily change the column structure of the site. It is simple and perfect.
Any idea how to add the "Text Layout" button to a pub site?

Published site has more pages that local iWeb files

I added several pages to my site. Then my hard drive crashed and my backup did not have the new pages. Now the published site has more pages than what i see when I open iWeb. How can I fix this? I want all the published pages also available in my hard drive.

You will have to recreate the new pages, unless you can use a file recovery service to ressurect the domain file that was on the crashed hard drive.
You can copy and paste images and text from the published website (view it in your browser) into new iWeb pages, but there is not a way to import html files back into iWeb.

Aligning Text in Text Frame

I am placing text within a text frame on the header of my master page. Once I have the text centered and aligned within the text frame in the design screen and go to the preview screen the text displays as skewed to one side (usually to the left). In order to have the text centered within the frame on my published site I had to skew it off center in design mode. See the 'modern kids clothing' text box at the top of my site www.kikikidswear.com
Is there something I am doing wrong?
I've also noticed that when I view my published site on a wide screen monitor other text gets skewed such as the words 'kids wear' on the header and the copyright info in the bottom right of my footer.

Hi Abhishek. Here are the screen shots. These aren't exactly what was used to upload my site as I've played around in Muse trying to figure this out but you can see what the issue is I think by comparing the design view and the preview view. In order to get the text to display as centered (relatively centered in this example) in preview or when previewed in a browser I've had to skew the text fairly far to the right of the text box in design mode. I generally preview in IE explorer 8 on Windows XP although I do also preview the website in other browsers (Firefox, Opera, Safari). The text alignment has not been an issue between browsers although I notice the KIKI logo text in browsers other than IE is slightly jagged on the letter K.

Published site - text moved, text spacing inconsistent

Similar Messages

Maybe you are looking for