Published version of website different to whats visible in iWeb.

I have created a website: musictherapybedfordshire.co.uk in iWeb and published via Filezilla. Once published a version of my menu bar has been added vertically down the left hand side of every page pushing all the main text down the page. This is in addition to the menu bar across the top of the page as I want it. How can I go about correcting this as I don't see it like this with the mistakes in iWeb?

Check both circled checkboxes for each page in your site:
OT

Similar Messages

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

How to make a new section visible in the server published version

I use UPK 12 Client.
When I click "Link a new section" in an existing Module, I can see it in the outline in the left pane in my UPK 12 Developer. When I then check-in all items, click Publish > select c: drive (a test folder) > Publish entire outline, the outcome includes the new section created.
When I do the exact same procedure, but choose to click Publish > server (which is set up for my UPK) > Publish entire outline, the outcome does NOT include the new section created, but everything else yes.
How to make the new section visible in the server published version?
Thanks!
Sille

Hi Sille,
Are you publishing over knowledge center? or is it publishing to a network drive? Once you check in the section save the module once and try again. See if it makes any difference.
best regards,
SD

What are the steps to publish a local website to Creative Cloud?

Other than a mention of using Business Catalyst, I don't see instructions for publishing a local website to Creative Cloud. A membership includes up to 5 sites. Do you have to publish from Business Catalyst?
Thanks,
Sherry Bishop

I'm looking for options for students to use in class. Since CC offers 5 free sites, I would like to know what would be the easiest way for beginners to upload a site that could be accessed by the instructor and other class members. Would that be Behance?
Thanks, Sherry
"If you never depart, you never arrive."

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

How to get previous published versions of publishing pages in sharepoint 2010?

Hi all,
I have to get last published version only if effective date(custom column) is changed. So i have to check two conditions one is whether it is published or not and other is effective date is changed or not. If effective date is changed get the last published
version and copy this version and move to other library.
suppose 6.0(published), effective date 05/20/2013
6.1(draft), effective date 05/20/2013
7.0(published), effective date 06/20/2013
Here i have to get 6.0 published version, copy and move to other library.
So how can i achieve this one. what's the best way to do this? either workflow in SPD / VS2010 or event receivers. Please guide me.
Thanks in Advance
san

Hi Emir,
Your code works fine. It does copy the previous version page to another library. But when I attempt to edit the copied page it throws an unexpected error. I traced down the ULS log and I found the error saying. Could you help me to overcome this error?
System.ArgumentException: Column 'PublishingPageLayout' does not exist. It may have been deleted by another user.
at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException)
at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)
at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)
at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ComputeRedirectionVirtualPath(TemplateRedirectionPage basePage)
at Microsoft.SharePoint.Publishing.Internal.CmsVirtualPathProvider.CombineVirtualPaths(String basePath, String relativePath)
at System.Web.Hosting.VirtualPathProvider.CombineVirtualPaths(VirtualPath basePath, VirtualPath relativePath)
at System.Web.UI.DependencyParser.AddDependency(VirtualPath virtualPath)
at System.Web.UI.DependencyParser.ProcessDirective(String directiveName, IDictionary directive)
at System.Web.UI.PageDependencyParser.ProcessDirective(String directiveName, IDictionary directive)
at System.Web.UI.DependencyParser.ParseString(String text)
at System.Web.UI.DependencyParser.ParseFile(String physicalPath, VirtualPath virtualPath)
at System.Web.UI.DependencyParser.GetVirtualPathDependencies()
at Microsoft.SharePoint.ApplicationRuntime.SPVirtualFile.CalculateFileDependencies(HttpContext context, SPRequestModuleData basicRequestData, ICollection& directDependencies, ICollection& childDependencies)
at Microsoft.SharePoint.ApplicationRuntime.SPDatabaseFile.EnsureDependencies(HttpContext context, SPRequestModuleData requestData)
at Microsoft.SharePoint.ApplicationRuntime.SPDatabaseFile.EnsureCacheKeyAndViewStateHash(HttpContext context, SPRequestModuleData requestData)
at Microsoft.SharePoint.ApplicationRuntime.SPDatabaseFile.GetVirtualPathProviderCacheKey(HttpContext context, SPRequestModuleData requestData)
at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath)
at Microsoft.SharePoint.Publishing.Internal.CmsVirtualPathProvider.GetCacheKey(String virtualPath)
at System.Web.Compilation.BuildManager.GetCacheKeyFromVirtualPath(VirtualPath virtualPath, Boolean& keyFromVPP)
at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile)
at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile)
at System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean noAssert)
at System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert)
at System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath)
at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

TransformVector in debug/publish version of flash

I have problems with transformVector function when debugging flash. I use simple translation matrix that moves point by 25 on z-axis, everything works fine when I run the flash in browser but in debug mode, transformVector makes vector -20 -20 -20 to -1 -1 -26 instead to -20 -20 -45 as in publish version of the movie. Any idea why debugging the movie mess things up with calculations ? The matrix and imput vector is completelly same in both cases but the computed vector is a mess...
Edit:Looks like transformVector function has different functionality in different versions of flash 10 ... so much for version compatibility ... better to ignore this function ...

There are many people complaining about this in other threads. I found the solution from kglad in this thread: http://forums.adobe.com/message/5750996
You can get Flash CC to publish to version 9 player by putting these two files in these locations:
This file: http://forums.adobe.com/servlet/JiveServlet/download/5510986-147069/Fl ashPlayer9_0.xml
Goes here: C:\Program Files\Adobe\Adobe Flash CC\Common\Configuration\Players\FlashPlayer9_0.xml
This file: http://forums.adobe.com/servlet/JiveServlet/download/5510986-147068/pl ayerglobal.swc.zip
Goes here: C:\Program Files\Adobe\Adobe Flash CC\Common\Configuration\ActionScript 3.0\FP9\playerglobal.swc
You may need to create the FP9 folder.
Restart flash and you should see Player 9 in your publish options. You'll have to find the AS3 clickTag code.

RE: (forte-users) Is there a later version than Forte v30L2?What 's th

Hi,
We have recently upgraded to 30L4, and Forte say that this fixes a
corruption problem with the repository to do with large projects.
This patch also fixes the problem with AfterValueChange event on
FillInFields.
Upgrading was simple for us as we don't use Express.
R4 is still next year some time as far as I know.
Regards,
Jace.
Jason de Cean
Genisys Team
Lumley Technology Ltd.
Lvl. 8, 55 Sussex St
Sydney, NSW 2000 Australia
Ph: 02 9248 1321
-----Original Message-----
From: Haben, Dirk [mailto:[email protected]]
Sent: Wednesday, 20 October, 1999 3:06
To: 'Soapbox Forte Users'
Subject: (forte-users) Is there a later version than Forte v30L2? What's
the news on R4?
G'day
Someone posted a while back about Forte v30L2 having a minor problem
with
the repository. What's the latest on v30L2 and is there a later release
worth going/waiting for - from v30G2?
What's the release plan for R4 - and what's in it?
Is SynerJ vastly different to Forte - complement, supplement? Any
management
issues to know/learn about?
When will we see integration of selected projects to baseline only
rather
than whole workspace?
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: [email protected]

I know system management for SynerJ is more complicated. I just got the
1.4.1 version of SynerJ and it has completely changed on how partitioning
work regarding the EJBs. Just more to learn to do the same thing we did in
Forte.
ka
Kamran Amin
[email protected]
(203)-459-7362 or 8-204-7362 - Trumbull
From: Peter Sham[SMTP:[email protected]]
Sent: Wednesday, October 20, 1999 9:55 AM
To: Haben, Dirk; 'Soapbox Forte Users'
Subject: Re: (forte-users) Is there a later version than Forte v30L2?
What's the news on R4?
Hi,
I guess many people is interested in finding out how different it is
between SynerJ and TOOL.
Here is something to share.
1. Forte is posting all manuels ( SynerJ, Fusion, Conductor ) on the Web.
You just need a customer login in. Here is a good start.
2. java.sun.com now has a beta document J2EE APM which explain the
architectual of J2EE. The document how and when you will use JSP,
Servlet, EJB & Java Bean etc. You will find it along with the J2EE beta
free download.
My feeling is: on system management level, SynerJ is more or less similiar
with what we have now ( maybe they jus rewriting everything in Java ).
However, on development and design level, there is quite a large
difference. Nevertheless, it's exciting.
Regards,
Peter Sham.
"Haben, Dirk" <[email protected]> wrote:
G'day
Someone posted a while back about Forte v30L2 having a minor problem
with
the repository. What's the latest on v30L2 and is there a later
release
worth going/waiting for - from v30G2?
What's the release plan for R4 - and what's in it?
Is SynerJ vastly different to Forte - complement, supplement? Any
management
issues to know/learn about?
When will we see integration of selected projects to baseline only
rather
than whole workspace?
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in
a new
email the word: 'Unsubscribe' to:
[email protected]

One Flash CC project gets stuck when publishing in IOS. It will quickly publish as Android, and other projects will publish as IOS. Not sure what to change.

One Flash CC project gets stuck when publishing in IOS. It will quickly publish as Android, and other projects will publish as IOS. Not sure what to change.

Thanks for the info.
I've recently stumbled on an article on how to view the packaged file (apk) published using AIR 3.2 for Android setting (Adobe Flash CS6). All you need to do is change the extension of the file from (.apk) to (.rar) or (.zip) and extract the file as you would with any other zip or rar file. I was able to confirm that the packaged file (apk) indeed contain all the videos for the presentation. I have more than 80 videos in the presentation. All videos included in the package are of the same video format and resolution (FLV 320x240) but of different duration. I intentionally included the all the videos inside the package so I can use the presentation anywhere and anytime without the need to connect to the internet. The packaged apk file size is (1.23GB) the file includes the project's swf and xml file, the component swf and videos.
When installed to android I noticed that the package remained as an apk file. Not really sure if android temporarily unpacks it when you run the app.
Testing phase:
I see no problem when I'm testing the project on my desktop computer. But when packaged and installed on my device the problem arise.
Problem:
I'm able to install and run the app on my device but wont play some of the videos included in the package.
Was this due to the limited RAM or processor of my android device?
I wanted to distribute the presentation to friends so i was trying to package it for easy access and installation on their device.
Alternative Solution:
I installed a third party app called SWF player by BIT LABS. Copied all the files to my device (the project's swf and component swf with the videos). The project worked like a charm the player (SWF player) and was able to run the presentation as if it was running of my desktop. All buttons and videos working properly. Although the alternative solution worked for me I still wanted to package the presentation for easy access and distribution to friends.
Please help...Thanks in advance.

NIKON D5000 NEF - Lightroom 2.6 and PSE show colors quite differently from what Nikon Software show

With my Nikon D5000 DSLR camera, I took recently photos from small blue flowers. I had set-up my Nikon D5000 to create for every photo both a NEF File and a JPEG File (and had set my camera to use Automatic While Balance).
I noticed that for NEF Files Lightroom 2.6 (and also PSE 7, that uses internally Camera RAW ) shows me the blue colors of the flowers quite differently from what I see with PSE for the jpeg file. It is my impression, that it is in the Jpeg files, that the blue color is close to the reality; and that it is with the NEF Files that Lightroom and PSE show a blue color that is quite different from the reality.
I also looked at the photo files with the NIKON "View Nx" 1.3.0 Software that came with my camera. With "View Nx" the blue colors (both with the NEF file and the Jpeg File) are very vlose that what i see with PSE 7 in the jpeg file (and quite different from what I see with LR and PSE for the .NEF File).
I mentioned this problem to Nikon Support. They suggested, that Nikon Software and Adobe software use different algorithms; and that the Nikon algorithms are better/closer adapted to the Nikon cameras than the more generalized Adobe algorithms that need to support a very large number of cameras.
But ....it is Lightroom that i wish to use to process my NEF Files and PSE that I wish to use to organize my Photos. Can a LR/Camera-RAW expert help me? I would like to find a solution to see with LR and with PSE in my D5000 NEF Photo Files blue colors that are close to the reality and close to what Nikon Software shows me on my PC. Please notice that I am very far away from being a professional and that i will probably not understand complicated explanations.
Thanks a lot in advance.
An additional note, that is perhaps not relevant: I used LR to convert my NEF File into a JPEG File format and looked at the blue in the result. It looks the same as what LR and PSE show me for the .NEF File (and looks different from the jpeg file crreated by the NIKON camera).

EJ and Jim
Thank You very much for your useful feedback.
I realize, that as a neophit I am an exot among the community of photo-experts and photo-professionals addressed by LR. Therefore the wish that I will now express is perhaps inadequate. But since it is gently, that i express this wish, I am probably allowed to do so......
My wish for a future version of LR, is that LR comes out of the box with a "reasonable" interpretation of the RAW images of most important/widespread modern cameras....without requiring that non-experts like me gets confronted from the very beginning with the need to develop their own default settings.
For this wish, I will formulate a Feature Request.
You might wonder, why a non-expert like me is interested in LR instead of using those Photo-Editing Software (e.g. PSE) that are supposed to address the need of non-experts. Well..... I am coming from the PSE world. I am reasolnably happy with the PSE Organizer....but I hate the complex, inefficient, unfriendli "user-interface" (experts will probably tell: workflow-interface?) of the PSE Editor. Its really a last-century Software. LR is so much more friendly, even for non-experts...within the Library Module, i do not need to switch back and forth between one dialogue-window for each type of change.... nearly all what i need is in that one right-hand pane of the Library module.
I honestly believe, that Adobe should take a serious look at promoting/marketing LR also to the audience of non-experts. That would be a good and attractive additional marketing opportunity for LR.

The quiz is not correctly calculating the number of quiz items in the published version

The quiz is not correctly calculating the number of quiz items in the published version
I created 20 quiz questions, but the output say there are 255. The slides between do not have quizzing enabled.

I have a similiar problem. However, I am tracking user activity through tracking "next" buttons. Each button (and other interactions) has a objective ID and interaction id. The objective id is the same throughout the course; however each interaction and quiz item have different interaction ids. The total quiz items is shown as 54 and the first question is shown as question 50 or 54.
The course will be published to Blackboard as the LMS; I am using SCORM 1.2
The following settings are needed to track the user activity throughout the course, specifically the "next" buttons:
1. include in quiz
2. report answers
The answers to the problem of total quiz items not matching the actual number of questions has you turn off the include in quiz for interactions. How is this problem resolved when you want these interactions included with the information passed through SCORM to the LMS?

Deleted Questions Still display in Published Version

After deleting a Question slide and inserting a new Quesion
Slide, The deleted question still appears in the published version.
In addition, the new Question will only display after completing
the quiz and going back to review. It then displays as incomplete.
Before republishing the presentation with the new Question, I
deleted the old version of the presentation.
I would appreciate any suggestions on how to resolve this!
Thanks!

Hi,
1.) How do I delete the B version of reports in Q? (Open system is not an option)
Use the T code RSZDELETE, Choose the object version as 'B', it will delete all the queries which are saved as backup.
Before that implement the correction program in the function module RSZ_X_COMPONENT_DELETE. The correction program is given in the SAp note 1097674
2.) What can I do to ensure the Actual Cutover will have B version deleted as well (A,B,M)
you can check in the same table RSRREPDIR with B as selection
3.) Why is there a B version report? Apart from due to BI7 query conversion, any other reason?
B version is a back up version. For example, you have created a query in 3.x features and changed in 7.0 query designer so generally this can't be opened in 3.x query designer. But if you wanted to do same, you can overwrite the current version of the query with back version so that it can be opened in 3.x query designer, you will loose all the changes done with 7.0 designer.

Publishing 2 separate websites

I am sorry, I have searched and searched and still have not found the answer I am looking for.
I am trying to publish 2 separate websites using iweb. The first website I have made was for a friend, using their own personal domain. When I go into my MobileMe account his site is listed as my own personal domain.
I would like to publish a second website just using my MobileMe domain and don't know how to do that. Everytime I click on publish to MobileMe, only the first account publishes (I think) and can be viewed.
How do I publish that second website to the generic url that MobileMe uses?

You can separate before publishing. Just be sure to make a backup copy of the original Domain file and move it to another located before starting the separation workflow. Using iWebsites duplicate the domain file and rename the copy for one of the sites. Open the duplicate with iWeb thru iWebSites and delete the site you don't want in that file. Do the same with the other domain file, i.e. rename it for the site it represents, open with iWeb and delete the site that doesn't belong.. As you can see in the screenshots that I posted you can have multiple sites, all named in iWeb with a name that indicates what the site is about but not necessarily the same name as the published site.
You will end up with two domain files in that iWeb folder: Site 1 and Site 2. When opening a site to work on always go thru iWebSites. Just easier and safer, IMO, that way.
Once you get the sites separated and published keep current backup copies of those domain files. I've created an Automator backup workflow, inspired by Varkgirl's original efforts, that will copy the User/Library/Application Support/iWeb folder and the domain files in it to the Desktop replacing any previous copy there. You can open the workflow in Automator, as described in the Read Me file, and change the destination of the backup. After each edit run the workflow to make sure your backup is current.
OT

Publishing to a website

can anyone advise me on publishing to my website?
I am new to the whole process?

JeanEke wrote:
can anyone advise me on publishing to my website?
After you have finished your book in iBooks Author, you export to the .ibooks or .pdf format and then upload the file to your server. Exactly how to do that is something you need to find out from the people who run your server, it has nothing to do with iBooks Author or Apple. If in the .ibooks format, your book would have to be free.

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.

Published version of website different to whats visible in iWeb.

Similar Messages

Maybe you are looking for