Published website (i-web) will show up on PC browser but not show up on my macbook (safari)

I am in India and have used a local company to host the website i make in i-web.
I can upload changes and the updated website can be viewed on windows browser, but it is not showing on my macbook.
When i type the url (www.girifoundation.com) i see the old website, not the updated version.
If it is green at the heading on the Welcome page, with address and email details, you are looking at the updated website.
If it has beige background, no address details, you are looking at the old format
Please advise me is it
(a)  my macbook ?
(b)  safari ?
I will be very grateful to recieve a reply on how to correct this.

In the future try clearing your browser's cache (Command+Option+E for Safari) and reloading the site to see the most recent changes.
OT

Similar Messages

  • In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

    In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

    Hello,
    Please make sure that the next button is pinned to the right side as there in the attached image.
    If it is already pinned, you can try removing any embedded HTML code and checking it.
    Regards,
    Neha

  • Javascript Navigator shows in Browser but not in DW Design View

    I am trying to install a javascript navigator on a web page.
    When I do this and view it in the design window, I get a message
    that says "Your browser does not support script". When I try to
    preview this with the IE browser, the navigation bar shows up. I am
    new at this so what am I missing? It shows up in the browser but
    not in the DW design page.
    Thanks

    >I am trying to install a javascript navigator on a web
    page. When I do
    >this
    > and view it in the design window, I get a message that
    says "Your browser
    > does
    > not support script". When I try to preview this with the
    IE browser, the
    > navigation bar shows up. I am new at this so what am I
    missing? It shows
    > up
    > in the browser but not in the DW design page.
    DW's design view does not interpret/execute javascript.
    -Darrel

  • Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

    Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

    Hi all
    I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
    I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
    How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
    Stay Hungry, Stay Foolish
    Solved!
    Go to Solution.

    Steve Chandler wrote:
    I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
    As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
    Kudos for being sneaky.
    I like these creative work-arounds!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

    If anyone can help me with this I would be seriously grateful.
    When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
    I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
    This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
    I've used Aperture in the past under previous versions and not had this problem.
    Any help would be great.
    Thanks.
    Bob.

    Hi Jack,
    Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
    It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
    I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
    Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
    Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

  • TS3999 I followed all of these instructions, but still iCloud Calendar will not sync to Outlook Calendar.  Calendar entries will sync from Outlook to iCloud, but not vice versa.  What do I do now?.

    I followed all of these instructions, but still iCloud Calendar will not sync to Outlook Calendar.  Calendar entries will sync from Outlook to iCloud, but not vice versa.  What do I do now?.

    When syncing Contacts or Calendars between an iPhone, iPad, or an iPod touch and Outlook 2003, Outlook 2007, or Outlook 2010, changes that you synced to your computer may not appear in Outlook even after the sync has been completed.Try this article to see if it works for you
    http://support.apple.com/kb/TS1944
    Hope this helps

  • Why will DVD play on one player but not another??

    Hi,
    I made an ISO file using devede and then burnt it to a DVD using K3B.  The finished DVD will work on a Magnavox player but not a JVC.  Is there anything I can do about this???  Do some players have a "must be produced commercially" filter or something???
    Jim
    Last edited by MillTek (2008-04-20 20:45:12)

    First, I am assuming you recorded your iso on +R type media.  Next, I'm guessing that the player that won't play your DVD is the older of the two players.  Some DVD players, especially older ones don't like +R media.  If this is the case, here is a possible fix.
    Here is a thread on another forum which discuses changing the booktype on your DVD burner.  Here is a quote from the original post:
    There have been many questions asked about how to booktype +R media to DVD-ROM
    Many standalone Players, HDD recorders/players and games consoles don't like +R media but they are happy enough to play -R or DVD-ROM.
    Some drive brands have tools to change this option but others don't. I have found that the easiest way to change your BOOKTYPE setting is to use a small burning tool called IMGBurn which can be found doing a Google search.
    Below you can see some screen shots which guide you through changing your BOOKTYPE setting. For this I have used my NEC4551 but IMGBurn supports NU-Tech, Plextor, Ricoh, Samsung, BenQ, LG, Lite-on and NEC.
    Once you have changed your BOOKTYPE setting, when you burn a +R/+RW disc it will be burned as a DVD-ROM which is the same as a bought movie and most players are happy to play these.
    Since my DVD players are happy with +R media, I haven't tried this.  Both of my players are fairly new, and I made sure that +R was listed on the box as one of the formats accepted by that player.
    As usual, try this at your own risk.
    Pudge

  • HT1364 why will my ipad2 connect to itunes but not my iphone 4s

    why will my ipad2 connect to itunes but not my iphone 4s

    why will my ipad2 connect to itunes but not my iphone 4s

  • Website page displays and javascript runs correctly in IE8 but not in Firefox 3.6.10

    website page displays and javascript runs correctly in IE8 but not in Firefox 3.6.10

    Can you post a link?
    Then we can take a look.

  • IMovie will open on a guest account but not on the primary account - why?

    iMovie will open on a guest account but not on the primary account - why?

    Maybe the parental control is activated for the guest account? Have a look in System Preferences -> Parental Control.

  • I have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

    i have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

    I tyhink that you need ExportPDF, Adobe ExportPDF (read only). In any case, thius may help: Cancel your membership or subscription | Acrobat.com online services

  • How do i get  my video to play from my ipod to my pioneer AV2300DVD music, but no picture. Will play on the ipod itself but not connected.

    How do i get my video to play on my Pioneer AV2300DVD music, but no picture. Will play on the ipod itself, but not connected. Also some songs and album art randomly cannot be located..

    How are you connecting it?
    What video are yu trying to play?
    Some video have copy protection that prventplaying them ia VGA out from the iPod.
    You really ae not provideing us enough information to help you. I do not know what a Pioneer AV2300DVD even is.

  • HT201209 My ipod will adapt to a wall charger and it will adapt  To my I-home but not my computer

    My ipod will adapt to a wall charger and it will adapt
    To my I-home but not my computer it is just going on and off
            With the apple sign but no
        Functions will happen what should I do
    <Edited By Host>

    please refrain from providing personal data, this forum is publically accessible to anyone and you're not addressing Apple or its employees here, only fellow product users.
    Regarding your issue:can you explain in your native language because it's not quite clear.

  • HT3951 How come when I download a movie it will play instantly on my laptop but not on apple tv...it takes hours to download

    How come when I download a movie it will play instantly on my laptop but not on apple tv...it takes hours to download

    The app as far as I can tell is not an Apple app. It has a gray "target" configuration with no indication of what is.

Maybe you are looking for

  • PI 7.1 - TX_MISSING_IMAP_CONT

    Hello all, I meet my first blocking issue on 7.1 version in SXMB_MONI : - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">   <SAP:Category>Application</SAP:Category>

  • Proxy to file scenario issue

    Hi, I am trying to configure a Proxy to file scenario. My sender service is ERP system and the my receiver is PI file system. These are the steps I followed: 1. Created a sender business system for Web AS abap (my ERP system) 2. Created a receiver bu

  • Setting ECHO ON takes more time?

    Hi all, Recently, we had to run a huge file with INSERTs in production database. But before that when the same file was run in testing database, we set the ECHO on in SQL*PLUS and it took more time, I mean, the difference was huge, in fact. I wish to

  • Explain plan does not say anything about partition

    Hello, We have Oracle 11g database. And we have range partitioned a table. Now when I see explain plans for queries sometimes it says PARTITION RANGE ALL (when no filter), Some times PARTITION RANGE ITERATOR or PARTITION RANGE SINGLE or PARTITION RAN

  • Array data type in SQL server

    Hi there, I have stored procedure which does have array data type. recently we have migrated oracle to SQL server but this array datatype doesn't support in SQL server. How can we rewrite this stored procedure to make it work exactly same as Oracle S