Publishing a bid invitation

Hi all,
Is there a transaction or program I can use to publish a bid invitation via SRM backend???
Regards,

Hi,
Which yout version?
That is available in the cofiguration guide.
See in the https://websmp106.sap-ag.de/srm-inst
Rgs,
Pedro Marques

Similar Messages

Publish Bid Invitations.

Hi Guys, need help in the following:
1) What does public bid Inviation mean? My understanding is that we will not have to assign any bidders to the bid invitation and it get published on a portal.
2) How do I publish the bid on a portal - I want to publish the bid invitation on Internet where the suppliers can see the opportunity for businees?
3) How does it work - Do we have to generate a PDF using smart form and then put it on the net some how?
4) How will the vendors respond to the Open Bid Invitation as they are not created in the system and do not have login details?
Kind Regards,
Abdul Kadir Rajbhoy

Hi,
Yes you are right.Public Bid Invitation means that any body can bid to the event.If Bidders are involved then it becomes Restricted Bid Invitation.
In Public Bid Invitation,you need to give link to which the intending bidder need to get registered by answering a questionnaire published by your enterprise.Once his registration is approved by the enterprise, he will be issued a userid & Pwd and he will be in a position to submit Bid response.
This requires the setting up of the Supplier Registration scenario.
Thanks & Regards,
Nagarajan

Bid invitation publishing with out workflow

Hi srm guru's,
I cannot publish the Bid invitation. System showing error message as no workflow.
I want to publish BI with out any workflow.
Is any configurations required for a bid invitation publishing with out workflow.
regards
sai

Hi Sai
     o   BUS2200 (Bid invitation)
         -   WS14500026 (Automatic approval)
         -   WS14500027 (One-step approval)
         -   WS14000091 (Alert workflow)
         -   WS14500028 (n-step approval)
Did you activated any one of the workflows?
SAP Business Workflow ->
perform task specific customizing
regards
Muthu

Publish date of a bid invitation

Hi,
There is a function or table that can give the date on I published a bid invitation?
Thank you,
joseph fryda

Hi,
Table:
BBP_PDHSB field quot_dead - for quot deadline
BBP_PDHSB field start_time - for time stamp for start time
CRMD_ORDERADM_H field created_at - for created on date
or FM:
BBP_LA_BID_GETDETAIL
BBP_PD_BID_GETDETAIL
Regards,
Marcin

Bid Invitation always in approval - BUS2200

Hello,
When publishing a Bid Invitation, always the document is falling in approval.
I am using SRM 5.0 with package 15.
In the transaction OOCU WS WS 14500026 (Automat. Approval of Bid Invitation) it is active.
To verify print enclosed: [PRINT|http://www.pedrosrm.hpg.com.br/ws14500026.jpg]
Rgs,
Pedro

Hello guys,
Thank you for the attention of all.
After all of the verifications, when trying to create a Bid Invitation it is happening me the following message:
In the approval workflow found. Inform system administrator
Same tends activated WS14500026.
To verify enclosed in the prints in the document word: [Print Document |http://www.pedrosrm.hpg.com.br/checkwf.jpg]
Some suggestion?
Tks,
Pedro

Bid invitation XML

Hi,
I want to send the bid invitation to vendor via XML. I choose output media XML and publish the bid invitation.
I get a success message that the Action is successfully completed, but I don't know what happened.
Does it works with XI?
Thank you
joseph
Edited by: joseph fryda on Jan 2, 2008 9:28 AM

Hi
Which SRM / SUS version are you using ?
You can create a Bid Inv in SAP EBP from the SC item. You do not set up Bidding Engine separately. It is part of EBP, you just need to enable the Sourcing/Bidding transactions, Assign Roles and Authorizations.
It is LAC, SUS, CCM, those are setup separately.
Bids are created in SRM Bidding Engine (ABAP part). If you don't want to use SRM Bidding Engine, then you should use the DPE scenario where the RFQ is not created in SRM but in your external Sourcing tool (Exostar).
This scenario is still present in SRM 4.0 or 5.0 (even if not intented to a futur extension).
You will trigger this RFQ export manually from Sourcing Cockpit, except if you have customized "automatic creation of bid invitation for items without source of supply" in SPRO --> SRM --> Sourcing --> Define Sourcing for Product Categories (this option is not available in EBP 3.5, thats' why I was asking about your SRM release).
Related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/33/16533d6dd60610e10000000a114084/frameset.htm
The bid invitation creation service is bbp_bid_inv.
Please look at following thread:
Email to Vendor and Creator while creating PO
Run report RSWUWFMLEC to convert work items to mail. In transaction SCOT you can send it to preffered vendors.
Related notes:
Note 837179 - SUS3.0: Possible changes for e-mail-notification
Note 738370 - E-mail notification: Composite SAP note
Re: Create and Send Bid Invitation
Hope this will help.
Regards
- Atul

Bid Invitation Alert - SRM_BID_INV

Hi All,
We have an issue with the Bid invitation alert, The alert providea a URL to the Bidders in the possible subsequent activities section of the triggered email for them to follow and check the Bid. Since this URL does not really work we have to replace it with a correct one. The problem is that this URL is not maintained or configured in the SRM_BID_INV in ALRTCATDEF. I tried by providing the new URL in the SRM_BID_INV alert and when triggered the mail has both the old URL followed by the new URL.
Could anyone please tell me where this URL is coming from, or where i can check to see if its maintained.
The OLD URL is basically the link to the sap server which when clicked asks for login details which the Bidder do not have.
Thank you in Advance
Edited by: vikasshettyk on Aug 11, 2011 8:10 PM

Hi YAng,
Thank you for your response.
I checked the BAPI and there are 2 custom smartfroms mentioned in the BAPI, one of which is a copy of the standard smartform BBP_OUTPUT_COVER.I checked the smartfroms but the alert message we recieve are not being generated from the smartform. The body and subject are all coming up from the SRM alert for the BID.
I tested the Alert using the report RSALERTTEST and when this triggers the mail it only contains the URL which we have included in the Alert.But when this alert is triggered when we publish the BID invitation it has the OLD url also in the possible subsequent activities.
Is there any possibility of this getting picked up due to some settings in the Alert.
Below is the sample mail.
Subject: Please check bid invitation 2000001041..
Importance: High
Alert ID: ##00581##
Please check bid invitation 2000001041.
Possible Subsequent Activities
http://Server_name/sap/bc/gui/sap/its/BBP_QUOT/!?client=010&sap-client=010&language=EN&sap-language=EN&BID_GUID=4E482D562A9B013DE10080009974E128&OBJECT_ID=2000001041
Follow the link to view the Bid Invitation HTTPS://Address.com
The one in bold is the OLD URL and the italicised is the new one.
Edited by: vikasshettyk on Aug 15, 2011 7:22 PM

Text of Publication - Bid Invitation

Hi experts,
I didn't define any event for my type of object of Bid Invitation. But even so, when I publish a Bid Invitation is sent an e-mail for the proposer with the following description:
ID de alerta: ##00186##
Verificar licitação 7000000389
Possible Subsequent Activities
http://uipasr50.company.xx.net:8000/sap/bc/gui/sap/its/BBP_QUOT/!?client=270&sap-client=270&language=PT&sap-language=PT&~DisconnectOnClose=1&BID_GUID=48A90794D2FA1195E10000000A0B7B18&OBJECT_ID=7000000389
How do I alter that description of the text?
Thanks,
Pedro Marques

Your question was to change the text description, hence I gave the associated smartforms. By the alerting has nothing to do with this notification.
1) Option 1:
SAP Implementation Guide -> Supplier Relationship Management ->
SRM Server -> Cross-Application Basic Settings ->
Set Output Actions and Output Format -> Define Actions for Document Output ->
BBP_PD_BID (Select this)
And set the value as below
Processing using selectio report
Immediate Processing
Then in Processing Types
Make sure Smart Forms Mail is not checked as default
This sould solve the problem of sending notifications.
2) Option 2:
You can switch off the BADI (EXEC_METHODCALL_PPF) implementation BBP_RFQ_SEND_XML.
Hope this solves your problem.
Regards
Kathirvel

Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation

Hi experts,
We are running SRM 5.5 with Support Level 16.
We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
ITEM 1: HIER (Bid Outline)
ITEM 2: Line Item
ITEM 3: HIER (Bid Outline)
ITEM 4: Line Item
However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
Transaction: BBP_BID_INV
Program: SAPLBBP_PDH
Screen: SAPLBBP_BID_INV_1000
Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
In the source code you have the termination point in line 73.
Active Calls/Events
(formatted below as "No: Type: Name")
24: Function: BBP_PD_ABORT
23: Form: ABORT
22: Form: ITMADM_UPDATE
21: Form: ITMADM_MAINTAIN_SINGLE
20: Form: ITEM_F_CHECK_FROM_WTAB
19: Form: ITEMLIST_F_CHECK
18: Function: BBP_ITEMLIST_CHECK
17: Form: PROCDOC_DB_CHECK
16: Form: PROCDOC_CHECK
15: Function: BBP_PROCDOC_CHECK
14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
13: Form: STATUS_SET_AND_INTERNAL_SAVE
12: Form: PROCDOC_UPDATE
11: Function: BBP_PROCDOC_UPDATE
10: Form: CHANGE_VERSION_UPDATES_ACTIVE
9: Function: BBP_PDCV_UPDATE_ACTIVE
8: Form: PROCDOC_CHECK
7: Function: BBP_PROCDOC_CHECK
6: Function: BBP_PD_BID_CHECK
5: Form: FCODE_DOCUMENT_CHECK
4: Form: FCODE
3: Function: BBP_BID_PROCESS
2: Form: PROCESS
1: Module (PAI): PROCESS
The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
* parent guids have to be identical ...
if gt_itmadm-parent <> w_itmadm-parent.
perform abort.
endif.
Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
Any suggestions would be greatly appreciated.
Thanks!
Best regards,
Kwong How

Hi Janu,
For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
Otherwise, we will raise a message as suggested.
Thank you so much for your help!
Best regards,
Kwong How

BID invitation publishing authorisation

Hi,
When we select " Process Bid invitation" in EBP, we have find button through which we can filter the Bid invitations and open the same. But it lists even the Bid invitations which i am not authorised.
For ex.
Bid invitations created by "P1" purchasing group are Bid1, Bid2 & Bid3.
Bid invitations cerated by "P2" purchasing group are Bid 11, Bid12 & Bid13.
P1 purchaser can open the Bid invitations (Bid11,Bid12 & Bid13)created by P2 and can publish. Is there any control in org.structure or it is only through authorisation objects.
There is a selection criteria "My Bid invitations". But it can be used to open only my bid invitations not restricting others to open my bids.
Regards,
Prasanna

go to PFCG
Create a new role for Example ZBR01_EC_BBP_OP_RM1
BR01 is a plant
RM1 is a pruchase group
and go to authorisation and display authorisation data . then go to organisational levels and maintain purchase group , purchase organisation.

Notification when Bid Invitation is Published

Hi,
We are using SRM 5.0 classic scenario.
We have a requirement to send an email to some specific users, when a bid invitation is published. I suppose, the email is triggered to vendors by default.
The specific users are determined from bid invitation document.
Is there any way to configure this via. Alert Management? I checked in Event Schemas but there is nothing for 'Bid Invitation Published'. Can we add this as an entry there?
What are the steps to activate this alert?
Anybody worked on Alert Management, please share the steps.
Any alternative ideas other than using Alert management are also welcome. (like we thought of writing code to send mail in DOC_SAVE badi, but we needed to verify whether Bid got published, as this badi is called before saving document).

Hi,
In define event schema for the business object 'BUS2200' there will on schema 'RFQ' defined in the standard. For the schema RFQ there is an event called PUBLISHED already available in the standard. Here if you do not make any entry tthe alerts will go as soon as bid is published. If you put a value say 1, alert will trigger after 1 hour from the bid publication.
If you still have any doubts, please upda the threa and do reward points for helpful answers.
Thanks
RRK

Finding Published date of bid invitation

Dear All,
I Want to know which table/ Function module stores the 'published date' of a bid invitation. Table CRMD_ORDERADM_H stores only created date and changed date. We are using SRM 4.0
Thanks.
Regards
Amit

Hi Amit,
Try using the following FM
BBP_PD_BID_GETDETAIL
see this link too
Publish date of a bid invitation
Hope this solves ur query
Thanks,
Pradeep.
Edited by: Pradeep Purushottam on Sep 11, 2008 8:40 AM

Multiple Insert in Doc Save Badi when publishing Bid Invitation

Hi to all experts,
Currently i need to track changes in bid invitation. What i did is using doc save badi to get the value (bbp_bd_bid_getdetail) and compare them with the value i save in a cutom table.
Then the problem come in. Even if there is no changes, the badi will still cause an insert into my custom table. I used the debugger to go through the code and it never go to my insert statement.
However once i finishing running the dubugger, my custom table will have a new entry...
Why is this happening? IS it due to the different GUID in the bid invitaion?
Points will be awarded generaously, thanks again for reading.

Hi Disha and Marcin,
Thank you so much for your prompt replies. I have awarded points. We are using SRM 5.5.
Correct me if I am wrong, I have thought of using the doc_change badi but how do I confirm the changes should user cancel the transaction?
Hi Marcin,
I am new to this term LUW, please elaborate more on this.I have checked and confirm no other program or badi called my function modules.
I have suspected that the badi was called n-times and insert a line into my custom tables. I tried using modify in place of insert so that such problem can be avoided but this was not successful with saving longtext.
What I notice is after the system undergo a patch, the doc save badi started to behave in this way?
Please kindly advise, all SAP experts! Thank you!

Bid Invitation Publish - Any user exit/BADI upon Publication

Dear Gurus,
Please advise my if there is any user exit/BADI which triggers upon Bid Invitation publication? Appreciate all your help.
Sincerely,
GM

Hi Gopi,
Dont forget to say THANKS the SDN way!
Thank Others by Giving Points
SDN/BPX has a Contributor Recognition Program. Which in short text means that for each question you have 10 points, which can be given to the person that answers your question. 6 & 2 points should also be given for helpful answers. For every question you later award points for, you in turn receive 1 point for. Please note that you do not need to explain that "points will be awarded". We should all know how the forum works.
BR,
Deepti.

SMS Alert after Publishing BID Invitation

Dear SRM Experts
What customization/Development I have to make so that after pulishing BID Invitation SMS alert goes to the vendor
Thanx
Nawed

Dear Nawed,
This SNC forum not a SRM forum.
You can post SRM query in SRM forum
below is the SRM forum link
Supplier Relationship Management (SAP SRM)
Thanks,
Nikhil

Publishing a bid invitation

Similar Messages

Maybe you are looking for