Publishing a list with specifics views anf filters for all the users to see it.

Hi i was working on the item level permissions of a list which are accessed by all users.
I have applied the item level permissions for specific users having specific records to work with.
Now, there are situations when we need to show all the users all the data but in read only mode.
How do i work on the report so that the user can actually only see the data.
The Admin will pick the list with a specific view and apply filters and then expose it for other end users to view.
How do i achive that?

Hello,
How did you set item level permission? I mean, list "advanced settings" OR manually edit the items permission by breaking the permission.
If you have broken the permission and user doesn't have permission on items then there is no way to show item to users. You must provide at least read access to view the item.
In you case, you can give contributor right to everyone on all items (by inherit parent permission) then go to list settings page-->advanced settings-->then set item level permission as shown in pic:
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

How to set up same timezone in BI Publisher for all the USERS?

Hi Experts,
My OBIEE version is 11.1.1.6.6 and any user can go into the My Account and then preferences and set the timezone.
But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
How do i setup common timezone in BI Publisher for all the users?
Thanks
Ashish

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

How can I sync with a new computer without lost all the info?, the old one was stolen.

How can I sync with a new computer without lost all the info?

See Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Can we list all the users or groups with there rights on the universe\s

Can we list all the users or groups with there rights on the universe\s using query builder.
Can we do the same by using auditor reports.
PLZ help

Thanks ,
It can be acihived by using secuirty viewer.
Thanks again

Can i publish a website with out having to pay for dotmac??

can i publish a website with out having to pay for dotmac??

Are you on a trial version of .Mac? If your present page is on .Mac and you have login priviledges to this account, you can upload to it via iWeb. If the site you are uploading carries the exact same name as the one that is there now, it will overwrite the existing site. Trial versions of .Mac are limited to 50MB of space.
If you are talking about Homepage, sites created in iWeb and published to folders can be placed in your Sites folder and viewed with your homepage url; as long as they are named differently they will not overwrite one another.

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months.

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months. There is definitely a glitch somewhere because if I am on day view and try to click on day 15 of October, it will not let me. It totally is acting weird.

Free fonts, fonts from a reliable foundry?
Have you tried removing them temporarily?
Do you still have problems if you create a new Windows user account and log in with that? How about if you start in Safe Mode?
And I would run a memory checker and see Troubleshoot font problems | Windows

How to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?

how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
I have tried with dsquery below but status is not showing there.
dsquery * -filter "(objectCategory=computer)" -attr name operatingSystem

last logon user name - not really stored (or lined) with computer object. However, you can get this info during the logon process or from the computer. Here is method:
http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Assigning View permission to all the users that have been selected in contact selector - SP 2010, InfoPath 2010

I have a SharePoint InfoPath 2010 browser form with item level security. Only submitter
and approvers has access to the form. This form contains a people picker that is populated with the names of attendees
for the meeting they attended (which
I am able to store in Field2 below). I want to allow attendees to be able to view (grant view permission) the InfoPath form. Field 2 has the users in form of domain\user1;domain\user2; etc. Following the below step, I am getting error when I ADD or REPLACE
permission on current item. How do I go about assigning view permission to all the users that have been selected in contact selector?
Jitu

Hi ,
i understand that the text box and the people picker hold multiple user names and you want to grant user permission based on the user in the text box.
I have a test based on your description,the results are: When there are multiple users in the text box, the workflow will throw an error'Error Occurred'.It is the same with the people picker column.
You need to limit the peopel picker to only allow to select one user,in this way the text box will only hold one user.Then you can use the people picker or the text box to grant user permission.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

List of ports for all the WCI services

I'm trying to figure out why collab cant talk to the CNS, and I see in the log:
"Attempting to connect to teh notification server at host=blah (udp heartbeat port=28282 ..."
aarg. where is the configuraiton for this? can't find it anywhere.
Has anyone created a complete list of source - destination ports for all the new components?
I"m going to start writing them down here:
http://wiki.oracle.com/page/Webcenter+Interaction+Deployment

Hi Joel,
I have had a similar problem before but I am not sure if it is related to this, if you take a look inside the PTHOME/settings/configuration.xml file you will find some extra parameters which are not listed in the configuration manager for collab.
I suggest trying some of these settings to see if they coincide with your issue. The problem I had before was when a port that was not even listed in the config manager was blocked by my firewall.

How to view all the users existing in a Client

Hi
Can any one help me, How to view all the users existing in a Client (Other than SM04 and AL08).
I want to view not only the active users, but all existing users.
Thanks in Advance
Chandra

Hi,
Check table devaccess. to get all developers list
Reward points if helpful.
Regards,
Mukul
Edited by: Mukul Sharma on Jun 2, 2008 12:10 PM

How to retrieve all the users along with their password from LDAP

Hello,
Can anyone let me know how to retrieve and list all the user along with their password from LDAP.
Thanks

Hi Prashant,
I have limited experience with Synchronization, but I agree with you - if you need to synchronize Passwords, you need to have the Password in clear Text.
If you trying to build your own Synchronization Solution using any of the avaliable LDAP APIs, I don't think you can ever retrieve a user's Password in clear text.
However, I did come across an interesting article & I hope you find it useful :-
http://www.oracle.com/technology/obe/obe_as_10g/im/configssl/configssl.htm
I am not sure if SSL is necessary - If you have a look at Metalink Note 277382.1 ( How to Configure OID External Authentication Plug-In for Authentication Via Microsoft Active Directory (MS AD) ), teh question asked by oidspadi.sh for the same is asnwered as "N".
Regards,
Sandeep

View chat history for all users and prevent them f...

"I need to be able to view chat history for all users in the organization and prevent them from deleting their chat history. This needs to be done form a centralized admin portal and not on each workstation. I don’t see that as possible with Skype for Business. If it is please let me know. That is a must-have. The rest I can work around. "
Can anyone please provide documents that confirm if its possible or not.
Thank you

You can reset a VIs rev history using VI Server to load the vi and a method to reset. See attached (LV 8.6)
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Attachments:
Reset VI History.vi ‏9 KB

Currently using Lightroom 5 as a standalone on a mac and two windows machines one desktop one laptop. with CC can i still use all the machines or do i have to take out an individual license for each?

with CC can i still use all the machines or do i have to take out an individual license for each?

Your LR5 license allows for activated installations on two machines. Of those two machine, only one can be using the licensed software at a given time. The same applies with CC, except with CC you won't be able to sneak in the third machine. What you can do though with CC is have it installed on all three and sign in and out of the different machines as needed.
If you intend to be using all three machines at the same time then you do need three separate licenses/subscriptions to be in compliance with the license agreement.

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

Publishing a list with specifics views anf filters for all the users to see it.

Similar Messages

Maybe you are looking for