Publishing BEX Analyzer reports

Hi,
Is it possible to pubish BEX Analyzer reports (through Broadcast mail) in BI 7.0?

http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/7998403de08368e10000000a1550b0/content.htm
Please go through the links.
Hope this would help you.

Similar Messages

BEx Analyzer report "New Formula", "Scaling Factor" property not working

Hi Experts,
I have created a New Formula(Ex:- Dispatches * 2) in BEx Analyzer report. The result of the "New Formula" is 2000. When I maintain Scaling Factor as "1000" to the New Formula properties, the result should be 2 but here 2000 is coming again.
When I maintain this property to the existing keyfigure in Analyzer report, it is working fine.
Please help me in this whether Scaling Factor can be applied to the New Formula or not in BEx Analyzer report. If it works, what changes we have to make to the New formula.
SAPKW73010 is applied already to SAP BW-730
Please see the attachment.

Sree,
Is the variable ABC the new one that you've created with Scaling factor setting given? The message you get on doing a syntax check on the query indicates that settings are ignored for use beyond the query.
And if this is the case, this is a known issue.
However such settings will work on existing keyfigures as it is in your case.
What you can hence do for this new variable is that if you are developing reports on top of this bex query, you can make the scaling factor setting at the report level.
Let me know if this works for you.
Regards,
Srilakshmi B

Publishing BEx Analyzer data in Portal

Hi,
Does anyone have experience with publishing BEx Analyzer data in Portal?
I need an overview of practical steps to achieve the same.
Best Regards,
Kumar

Hi Deepu,
All the parameters in the SAP_BW system is correct and i have tested the ITS, WebAS and Connector tests also and everything is green. In the BI diagnostic tool everything was green however in the RSPOR_SETUP the Maintain User Assignment was getting failed, so i removed the UME Master System (Reference system) from the Portal as i'm using the SAP Logon Tickets both ways. So there is no need for the reference system. After that RSPOR_SETUP is okay and in the BI Diagnostic tool one is red (UME Master system).
One thing i have noticed in the RSPOR_SETUP now that it tells me in the second step:-
com.sap.ip.bi Java classes with different versions.
Different ABAP and Java Support packages
ABAP support package 12
Java Support package 11
Vaib
Any clue??
Vaib

Issue with status of data information in Bex analyzer report

Hi BI gurus,
One of the queries showing older date for the "status of data" information in the report of Bex Analyzer. I have tried to correct it in Bex analyzer by removing existing Text information element and adding a new Text element in the Bex Analyzer designer for the query. But it doesn't worked out as the changes made to the query through Bex Analyzer are only being saved as a local work book rather than reflecting to the query. Please suggest me with some options to resolve this issue and give any Idea to correct the "Status of data" in the Bex Query designer.

Hi Aditya
This is a common problem faced by users when reporting on Multi-Provider.
In my project what I did to overcome this is to run a Fake DTP to the cube whose status is creating problem.
Like , if under MultiPro I have a planning cube which is only updated monthly but all the actual cubes updated daily. In this case create a DTP under Plan cube with some impossible selection condition ( like fiscal year 2099). This will bring 0 records to planning cube ( and thereby not impacting the data) but will update the last loading time.
Regards
Anindya

BEx analyzer - report execution error

Hi all,
while running on BEx Analyzer we encountered an error which gives communication error with the Bw server failed due to RSR_NET_RESULTSET_GET_S error. anyone has an idea to resolve this issue?
Thanks in advance.

hi
Thanks for the reply.
We checked the connectivity and it was oki..
The problem arise when executing reports in development client. production reports are working fine.
BEx installation check is also performed and found no errors.
Trace file indicates as follows :
Trace Started as: 4/3/2009 11:40:14 AM*
ListSeparator: ,
ExcelVersion: 11.0
AddinVersion: 7100.1.602.1292
BExCheckFrontend.CheckFrontend: No Check performed (20090402) 0
Conflicting workbook ids: iWBid: , Property: 7B2UOAYFBA2MLMWMBSDZJDSF0
4/3/2009 11:44:02 AM----
com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: Function module "RSR_NET_RESULTSET_GET_S" not found.
   at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Function module "RSR_NET_RESULTSET_GET_S" not found.
   at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Please let us know a solution ..
Thanks!

BEx Analyzer Report error - microsoft office excel is waiting for another

Hi,
I am running a query from BEx Analyzer, it is throwing the error as " microsoft office excel is waiting for another application to complete an ole action "
Here in variable screen, I am trying to give input for the variables, then it is throwing the above error message.

The error message you are receiving means that an Excel macro is waiting for another macro to finish in order to proceed. It is an informational message so you understand why the system is slower than expected.
The solution is on the Microsoft side, see BOJ Note 1201513.
From the MSDN link below, you will see a description of the Display
Alerts Property:
http://msdn.microsoft.com/en-us/library/aa194195(office.10).aspx
DisplayAlerts Property
wdAlertsNone No alerts or message boxes are displayed. If a macro encounters a message box, the default value is chosen and the macro continues.
The Note suggests changing the "Application.DisplayAlerts = False" to "Application.DisplayAlerts = wdAlertsNone"

Missing Row Data on BEX Analyzer Report

Hi, been a while since I used BEX Analyzer. Have a BEX Query that we added a row of data to and the results show the row populated in Query Designer. However, when I open up a workbook in BEX analyzer that uses that query, the row still does not show up. What do I have to do to make the row of data show up?
Thanks.

Hi Keith,
I am not sitting in front of system now,but there are three checks which needs to be done. there is one refresh on every opening option also which needs to be selected.
Thanks and regards

BEx analyzer/reports

Can anyone let me know all the possible options to do, if a Bex Report is more than 65 K records ?

Hi Venkat,
You can run this report on the web where this limitation does not hold you back.
Hope this helps...

What are the standard bex analyzer reports available?

hi all
what are all the std reports available for fico? sd and mm?
thanxs in advance
regds
hari

Hi,
This is the best way...and the simplest way....since it is a big question....just go Business content tab in RSA1 and there go to "query elements" option and cick on the option "select objects" this will give you all the standata BW queris based on all the BC cubes and it will not show self developed queries in you system.
So fo MM reports go to...Infoarea "Supply Chain Management"-> "Inventory Management"....here you will see all the cubes related to MM and the reports nased on that.
for FICO go to Infoarea FMCO Financial management and controlling.........
Similarly you can find for SD.
If you want to find the detailed information about all the queries .....you will have to search the help.sap.com witth the same name of the cubes and you will get various links explaining that.
Thanks

Bex issue Report designer

Hi Expert,
Users are facing issue while accessing Bex analyzer (report designer). They are getting below error:
M ***LOG R49=> ThReceive, CPIC-Error (020223) [thxxhead.c   7570]
M ***LOG R5A=> ThReceive, CPIC-Error (59571422) [thxxhead.c   7575]
M ***LOG R64=> ThReceive, CPIC-Error ( CMSEND(SAP)) [thxxhead.c   7580]
A RFC 3342 CONVID 59571422
A   * CMRC=20 DATA=1 STATUS=1 SAPRC=223 ThSAPCMRCV
A RFC> ABAP Programm: SAPMSSY1 (Transaction: )
A RFC> User: xxxx (Client: xxx)
A RFC> Destination: SERVER_NAME(handle: 1, 59571422, {97C098DF-B654-F14C-9794-00215C8272DD})
A RFC> Called function module: RSR_NET_INTERFACE
A RFC SERVER> RFC Server Session (handle: 1, 59571422, {97C098DF-B654-F14C-9794-00215C8272DD})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: BExReportDesignerStarter)
A RFC SERVER> Called function module: RSR_NET_INTERFACE
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223
CPIC program connection ended (read error)
[abrfcio.c    8178]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3344
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223
CPIC program connection ended (read error)
[abrfcio.c    8178]
A *** ERROR => RFC Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829
[abrfcio.c    8178]
After giving user name & password in report designer screen, nothing happens & it get disconnected after some time. They are facing this issue in whole BW landscape.
Any other inputs, please let me know.
Regards,

Hi,
I am from basis only. I don't understand who is responsible & where problem lies.
Regards,

Bex Analyzer - Filling cells

Dear all,
simple question:
İn bex analyzer report shows as follows:
A -B - C- 120 usd -- 4 pc
- - D -120 usd- -4 pc
when its same char, it does not paste A again in the second line as it repeats.
Is there any chance we can tweak that in bex analyzer and excel fills every cell?
Thanks
Edited by: john mcquade on Jan 25, 2010 1:39 PM
Edited by: john mcquade on Jan 25, 2010 1:40 PM

Hi John,
In the BEx Query Designer open the overall settings for the query and uncheck "Hide Repeated Key Values" in the display tab.
BR
Stefan

Broadcast in BEX Analyzer

We are running on BI 7.0 SP10.
Bex Analyzer 7.0 is running and dashboards are usings.
Is it possible to broadcast BEX Analyzer reports within dashboard

You can Broadcast BEx Analyzer Workbooks, for this you need BEx Precalculation Server installed.
Check out the How to Doc from Prakash for details.
https://service.sap.com/~sapidb/012003146900000085752006E/HowtoInformationBroadcasting.pdf

No data in Portal Report but have data in Bex Analyzer

Hi experts,
I have problem regarding portal reports. When you view the report using the bex analyzer, there is data. But when you view the report in the portal from iview, there is no data.
Please help experts.
Thanks

Hi Emmanuel (that's weird, I am an Emmanuel too! and we both have Filo origins),
There can be heaps of reasons for this.
1) Please try to run the query in transaction RSRT by entering the query name and clicking "Java Web". See if that gives you results. If that gives your results, then the iView that was saved in the portal might need some reconfiguration. Check it out.
2) Check the logic of your user exit variables. The sequence of the I_STEP calls is a bit different if you run a query in the Portal. For example, if you don't have a mandatory variable in your query, then the olap engine will call I_STEP=1 to 3 before it shows the variable screen. This behaviour is not documented in help.sap.com. However, it does work that way.
3) Try to check the caching settings for your iView. It might be caching the result. You can change this in Content Administration in the portal.
Try the above and see if it helps. Otherwise, post another message.
Cheers.

How to save BI report into normal excel sheet in Bex Analyzer

Hi Experts,
version of Bex Analyzer:
Bi addon 7.x
support package 7,patch 1
version 7004.4.0.5
excel-2003
when i am trying to save the report into excel in Bex Analyzer as below:
file-save as->Microsoft excel work.
when I open excel I am getting pop up windowu201Dthis file contains macros with an expired or revoked signature.Since your running under high security level,these macros will be disabled.u201D
when I click ok I am getting one more pop upwindow as u201Cmacros are diabled because the security level is set to high and a digitally signed trusted certificate is not attached to macros.to run the macros,change the security level to a lower setting(not recommended),or request the macros signed by the author using a certificate issued by a certificate authority.
what are these macros? why i am getting this pop up windows
When i opened the excel report is not looks like general excel report.how can I generate general excel report .I should not want to get excel report as in bex analyzer.I donu2019t want to have author ,status of data,chart,filter,information in excel report.
what settings I have to made to save the report in general excel format.
As i am new to Bi please correct me if i am wrong.
Anything is appreciable.
regards,
naresh.

Macros in general are nothing but piece of code in excel.
To allow unsigned macros to run, the Trust all installed add-ins and templates check box must be selected on the Trusted Publishers tab of the Security dialog box. This option is selected by default. If it is not selected (recommended), Excel allows you to run only macros that have trusted digital signatures.
1. On the Tools menu, point to Macro, and then click Security.
2. On the Trusted Publishers tab, select the Trust all installed add-ins and templates check box.

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

Publishing BEX Analyzer reports

Similar Messages

Maybe you are looking for