Publishing Error - Weblog is the problem

OK, I know everyone's having problems publishing, me too. Here's the error I get:
An error occurred while publishing file “/Web/Sites/iWeb/sitename/sitename's Weblog”.
I did successfully publish the site to a folder on my desktop. Can I just drag that folder onto my iDisk and completely replace my entire site without going through the (nonfunctioning) "Publish" command in iWeb?
IF not, can I drag iWeb to the trash and reinstall the old iWeb 1, which worked fine for me? Will that work?
Tx.
PowerMac G5 DP2.7 Mac OS X (10.4.4)

Mark,
I had the same problem and here is how I solved it.
(1) In the Finder menu select the Go menu and then select "My iDisc"
(2) When the iDisc opens, of the 13 items showing, open the Web folder and you will see two other folders inside iWeb and Sites folders.
(3) Open the Sites folder and you will see 17 items in it. (If there aren't any, just proceed.) Copy your 17 iWeb files and drag them to the Sites folder. When it asks if you want to replace the current files, click on "replace all." It takes a little time to replace all of the files (depends on the Apple server load. After all files have been replaced, close everything and open your favorite browser (Safari or IE, etc.) and type in the following address:
http://web.mac.com/username/website name and it should bring up your web site. I was never able to PUBLISH my site the normal way but it worked doing this with the exception that my hit counters do not appear. But everything else works fine.
Here is my camera clubwebsite URL
http://web.mac.com/ccatwv.cameraclub

Similar Messages

Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
persists, restart Outlook."
The error log message details are as follow:
System
Provider
[ Name]
Microsoft Office 15 Alerts
EventID
300
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T15:54:49.000000000Z
EventRecordID
655
Channel
OAlerts
Computer
Computer-Name.domain.local
Security
EventData
Microsoft Outlook
The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
301670
15.0.4420.1017
xyfc
0x8004011B
The system is as follows:
Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
OS: Windows 7 (64-Bit)
Application: Outlook 2013 (32-Bit)
The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
Any help would be greatly appreciated.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

Word Web App cannot open this document due to an unknown error. If the problem persists, try opening the file in Microsoft Word.

Word Web App cannot open this document due to an unknown error. If the problem persists, try opening the file in Microsoft Word.
Can anybody pls help me how to resolve this for which got strucked !!!!
Cheers !!
Praveen
Thanks in Advance !!! Cheers !!! Praveen

Hi Satheesh,
Thanks for quick Reply !!!
can u pls have a look that the below are Log Errors am getting .
Pls suggest me how to resolve that the all the services are in the running state only ,
1. Could not find default ServiceProxy or it does not implement
IWacServiceApplicationProxy.
2. Default service proxy not found while trying to get setting
WORDVIEWERSILVERLIGHTONLY.
Rgrds//Praveen
Thanks in Advance !!! Cheers !!! Praveen

How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error

How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
Aditya Mediratta

Hi,
Please try the steps mentioned below and check if it helps:
Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
Right click on outlook.exe and click on Properties and then click on
Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
Note: If you are using 64 bit computer then the file location of the file will be
Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
Best Regards.

MIRO error please resolve the problem

Hi gurus,
please resolve the problem urgent.
while doing MIRO Iam getting the following error.
after given PO number in MIRO I getting the following error. please how to resolve the problem.
Error in account determination: table T030K key ASHA VST V0
Message no. FF709
Diagnosis
In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
Procedure
Contact your system administrator.
Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
To do this, choose Maintain entries (F5).
where i can determin the accounts, which accounts will be effect.
Thank you & Regards
Anil

Hi,
You have to maintain the GL accounts for the correct combination of country, tax code, chart of accounts etc in the tcode FTXP for the transaction VST.
I hope either the transaction VST or the tax code V0 was newly added
You can get the correct GL account by askign the person who has initiated this change. May be your FI team member also can help.
T030K is the table which gets updated while you maintain teh entries through FTXP tcode.
Hope this helps you

Acrobat 9. Error 14. The problem was resolved by creating combined file that could be saved.

There was a "read only" discussion dated 2011. I could not find satisfactory solution on the web. The one that worked for me is listed in the topic. The problem happened when a large text (>700 p. was OCR). Now I have a workable document created by scanning.

The pdf file suffered from directory errors from the hard disk crash. While the pdf file you now have appears to work, it might be a good idea to retrieve the original pdf from a backup.
Ancient Proverb: There are two types of people in the world, those that back regularly and those that haven't lost data recently.

The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

This error occurs when I type in an address or copy an address from an earlier message.
Any Ideas?

Hello,
Did you try to repair Outlook/Office?
Please take a look at the
similar forum thread. It suggests the following:
•re-create an outlook profile
•scanning/repairing the .pst files (because Outlook Data Files can be corrupted)
Is this the case?
Anyway, I'd suggest asking non-programming questions on the Outlook IT Pro Discussions forum instead.

Export render errors - is fxfaxtory the problem

We have a project with mainly XDCAM HD 422, some clips have luminetri color correction applied with a vignette from an effect that comes with the fxfactory stuff. When I try to export the clip (11 minutes if length), it takes a very long time (30-40 minutes!!!), and that's because of the effects applied. but what's even worse: the parts with luminetri and fxfactory effects have render errors!!
Once even one of the fxfactory transitions had black stuff coming with the exported clip (we tried it with mxf/XDCAM and mov/apple pro res, almost same result, just the errors change...)
What's going on with premiere pro? 7.2.1 seems to be really buggy. Any other with similar experiences?
We are using Mac OSX 10.8.5.

Anyone using fxfactory and is having trouble with it?

TS5376 error 7 (windows error 126) is the problem I am having. I have windows vista or windows 7. This error msg started yesterday. i have tried uninstall and reinstall 2 times.

Does anyone know how to fix this?? itunes.exe error error7 windows error 126

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Publish Error but no specifics to indicate what the problem is

I have been working on my webpage all night - adding pages, editing, etc and when I went to publish the changes after saving, it took an incredibly long time (creating pages that did not have any changes for one) and at the end it gives me a lame "Publish Error" - there was a problem publishing to .Mac." But nothing to explain why there was a problem.
I have tried deleting pages that were newly created in case there was too much new material all at once but nothing has worked.
Anyone have any suggestions?
Thanks.

This Apple doc may help:
MobileMe: Troubleshooting iWeb publishing issues
...If no luck, MobileMe live chat support is now 24/7 — see this announcement.

Error on installing the EM 12c installation on Oracle Linux x86 32bit

Helloo,,
I was trying to install Oracle EM 12c on Linux , when i reach to the step of inserting the password of SYS administator , i pressed next button , then a pop message came, to do a deconfig process, so i did as follows, the the error came
[oracle@localhost bin]$ emca -deconfig dbcontrol db -repos drop -SYS_PWD ***** -SYSMAN_PWD ******
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/assista nts/util/sqlEngine/SQLFatalErrorException
Caused by: java.lang.ClassNotFoundException: oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: oracle.sysman.emcp.EMConfigAssistant. Program will exit.
NOTE: this is on the Virtual Box
Regards,
Smartguy

So ...
After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
Regards
Bruno Palma

GP_CAT:1304: ERROR: An error occurred in the encryption subsystem code (40) error

Hi,
my name is Zdenek Svoboda. I'm using WLE 5.1 on Solaris 2.6. I'm trying to
run an XA enabled Java CORBA objects in the WLE, so I need to create a JDBC
pool. I developed everything on Windows 2000 and it works fine. I'm trying
to move the code to Solaris and I'm getting these weird errors when
constructing the JDBC pool:
153542.hafnium!RTSJavaServerXA.24817: 10-16-2000: TUXEDO Version
6.5forWLE5.1
153542.hafnium!RTSJavaServerXA.24817: LIBTUX_CAT:262: INFO: Standard main
starting
153542.hafnium!RTSJavaServerXA.24817: IJINFRA_CAT:2: INFO: Starting JVM
153542.hafnium!RTSJavaServerXA.24817: srvid = 7, svrgrp = APP_GRP
153542.hafnium!RTSJavaServerXA.24817: njars = 1
153542.hafnium!RTSJavaServerXA.24817: IJINFRA_CAT:318: INFO: Static jar
management in effect
153544.hafnium!RTSJavaServerXA.24817: main: JTA_CAT:20: INFO:
ConnectionPoolDataSource created for JDBC driver:
weblogic.jdbc20.oci815.Driver
153544.hafnium!RTSJavaServerXA.24817: main: JDBC_CAT:4: INFO: Driver:
weblogic.jdbc20.oci815.Driver loaded
153544.hafnium!RTSJavaServerXA.24817: GP_CAT:1304: ERROR: An error occurred
in the encryption subsystem code (40)
153544.hafnium!RTSJavaServerXA.24817: main: JTA_CAT:9: WARN: Cannot create
minimum number of JDBC connections for the JDBC connection pool:
RTS_SEQUENCE_POOL. Total created: 0.
My environment is following:
APPDIR=/home/fu597/work/rts/bin
CALLBACK_PORT=2458
CLASSPATH=/local/wlec/udataobj/java/jdk/m3.jar:/local/wlec/udataobj/java/jdk
/weblogicaux.jar:/local/wlec/udataobj/java/jdk/wleclient.jar:/local/wlec/loc
ale/java/M3:/net/lyricle/local/bin/rv6.2/java/rvjpro.jar:/local/jdk1.2.2_05a
/jre/lib/sunrsasign.jar:.
COBDIR=/opt/tools/cobol/cobolv4
COBLIB=/opt/tools/cobol/drivers
FSCONFIG=/home/fu597/work/rts/bin/TLOG
JAVA_HOME=/net/lyricle/local/bin/jdk1.3
JAVA_LIBRARY_PATH=/local/jdk1.2.2_05a/jre/lib/sparc:/net/lyricle/local/bin/r
v6.2/lib:/opt/oracle/product8.1.6.1/lib:/local/wlec/lib:.
LD_LIBRARY_PATH=/local/jdk1.2.2_05a/jre/lib/sparc:/net/lyricle/local/bin/rv6
.2/lib:/opt/oracle/product8.1.6.1/lib:/local/wlec/lib:.
ORACLE_HOME=/opt/oracle/product8.1.6.1
ORACLE_SID=ORACLE8I
PATH=/opt/oracle/product8.1.6.1/bin:/local/bin/netbeans/bin:/local/jdk1.2.2_
05a/bin:/local/jdk1.2.2_05a/jre/bin:/local/jdk1.2.2_05a/jre/bin/classic:/net
/lyricle/local/bin/rv6.2/bin:/local/wlec:/local/wlec/bin:/local/wlec/weblogi
cob/bin:.:/usr/bin:/etc:/usr/openwin/bin:/usr/sbin:/usr/ccs/bin:/usr/local/b
in:/usr/atria/bin:/vobstore/dsk5/trigger_scripts:/vobstore/dsk5/misc_scripts
:/home/fu597/bin:/home/fu597/script:/opt/tools/tss_root/rel_s4_53/local_chan
ges/script:/opt/tools/tss_root/rel_s4_53/local_changes/bin:/opt/tools/tss_ro
ot/rel_s4_53/script:/opt/tools/tss_root/rel_s4_53/bin:/opt/tools/Workshop/SU
NWspro/bin:/opt/tools/SUNWspro/bin:/opt/tools/pure:/usr/devl/Dev/script.1.Ma
r.97:/usr/devl/Rel/script_rel.1.Mar.97:/opt/tools/ab/sys:/opt/tools/frame/bi
n:/opt/oracle/product7.3.4/bin:/opt/oracle/product7.3.4/proc:/opt/tools/tss_
root/ob/bin:/opt/tools/tss_root/rv.4.2/bin:/opt/tools/SUNprint/bin:/opt/tool
s/gnu/bin:/opt/tools/java/bin:/opt/tools/netscape:/opt/tools/cobol/cobolv4:/
opt/tools/tss_root/hawk/bin:/opt/tools/sudo.v1.5.4/bin:.
PROJECT=/home/fu597/work/rts
PWD=/home/fu597/work/rts/bin
RV_HOME=/net/lyricle/local/bin/rv6.2
THREADS_FLAG=native
TOBJADDR=//hafnium:2468
TUXCONFIG=/home/fu597/work/rts/bin/tuxconfig
TUXDIR=/local/wle
WL_HOME=/local/wlec
I use following UBBCONFIG file:
*RESOURCES
IPCKEY 55432
DOMAINID RTS
MASTER MSTR
MODEL SHM
LDBAL N
*MACHINES
"hafnium"
LMID=MSTR
APPDIR="/home/fu597/work/rts/bin"
TUXCONFIG="/home/fu597/work/rts/bin/tuxconfig"
TUXDIR="/local/wle"
TLOGDEVICE="/home/fu597/work/rts/bin/TLOG"
TLOGNAME=TLOG
TLOGSIZE=200
ULOGPFX="/home/fu597/work/rts/bin/ULOG"
MAXACCESSERS=100
MAXWSCLIENTS=50
*GROUPS
SYS_GRP
LMID=MSTR
GRPNO=1
APP_GRP
LMID=MSTR
GRPNO=2
OPENINFO="Oracle8_XA:Oracle_XA+Acc=P/hidden/hidden+SesTm=10000+LogDir=/home/
fu597/work/rts/bin+SqlNet=ORACLE8I+DbgFl=0x7+MaxCur=15+Threads=true"
CLOSEINFO=""
TMSNAME=TMS_RTS
TMSCOUNT=2
*SERVERS
DEFAULT:
RESTART=Y
MAXGEN=5
TMSYSEVT
SRVGRP=SYS_GRP
SRVID=1
TMFFNAME
SRVGRP=SYS_GRP
SRVID=2
CLOPT="-A -- -N -M"
TMFFNAME
SRVGRP=SYS_GRP
SRVID=3
CLOPT="-A -- -N"
TMFFNAME
SRVGRP=SYS_GRP
SRVID=4
CLOPT="-A -- -F"
ISL
SRVGRP=SYS_GRP
SRVID=5
CLOPT="-A -- -n //hafnium:2468"
cns
SRVGRP=SYS_GRP
SRVID=6
CLOPT="-A -- "
RTSJavaServerXA
SRVGRP=APP_GRP
SRVID=7
SRVTYPE=JAVA
CLOPT="-A -- -M 100 -jdbclog"
RESTART=N
RTSJavaServerXA
SRVGRP=APP_GRP
SRVID=8
SRVTYPE=JAVA
CLOPT="-A -- -M 100 -jdbclog"
RESTART=N
*MODULES
RTS_BACKEND
SRVGRP=APP_GRP
SRVID=7
FILE="/home/fu597/work/rts/lib/rts_backend.jar"
RTS_INTF
SRVGRP=APP_GRP
SRVID=8
FILE="/home/fu597/work/rts/lib/rts_intf.jar"
*SERVICES
*JDBCCONNPOOLS
RTS_SEQUENCE_POOL
SRVGRP=APP_GRP
SRVID=7
DRIVER="weblogic.jdbc20.oci815.Driver"
URL="jdbc:weblogic:oracle:ORACLE8I"
PROPS="user=hidden;password=hidden;server=ORACLE8I"
ENABLEXA=N
INITCAPACITY=2
MAXCAPACITY=10
CAPACITYINCR=1
CREATEONSTARTUP=Y
RTS_SERVER_POOL
SRVGRP=APP_GRP
SRVID=7
DRIVER="weblogic.jdbc20.oci815.Driver"
URL="jdbc:weblogic:oracle:ORACLE8I"
PROPS="user=hidden;password=hidden;server=ORACLE8I"
ENABLEXA=Y
INITCAPACITY=2
MAXCAPACITY=10
CAPACITYINCR=1
CREATEONSTARTUP=Y
RTS_CLIENT_POOL
SRVGRP=APP_GRP
SRVID=8
DRIVER="weblogic.jdbc20.oci815.Driver"
URL="jdbc:weblogic:oracle:ORACLE8I"
PROPS="user=hidden;password=hidden;server=ORACLE8I"
ENABLEXA=Y
INITCAPACITY=2
MAXCAPACITY=10
CAPACITYINCR=1
CREATEONSTARTUP=Y
Could you please help me to resolve this issue?
Thanks
Zdenek

I'd make an educated guess, based on the error message, that the problem lies in the PHP/MySQL on the Gracenote site and it ISN'T an iTunes or Apple problem. What you're seeing is similar to a 503 error in a web browser. That's ALWAYS on the server end. Gracenote may work it out or not, but I doubt it's anything you (on your end) or Apple can fix.

Publishing Error when publishing to .mac

I've been using iweb publishing for .mac for a while and recently, but recently whilst publishing it says that there is a publishing error. However the pages all seem to be there and working fine.
I've been saving the thing in iweb after attempting to publish (all of the edited pages remain red). It's been going on for a few weeks, at first I thought it was a fault with the .mac but now I am not so sure.
Any help is appreciated, it is an inconvenience more than an actual problem but it would be nice if it didn't do it.
Thanks

Quit iWeb, delete the preference file Home Folder/Library/Preferences/com.apple.iWeb.plist, restart your Mac, run Disk Utility to repair permissions, relaunch iWeb and do a "Publish all to .Mac".

Publishing Error Issues

I've noticed a number of folks in the forum have been getting some of the same publishing error msgs but I haven't seen any clear cut answers to how to resolve them or what the problem might be. I can't publish anything since I upgraded to iLife 06. I keep getting the same "Publish Error" msgs for index.htm and the navbar. Has anyone figured out what might be the problem. I've tried repairing permissions and even reinstalling and still nothing. Would appreciate any ideas/suggestions/workarounds. Thanks.
iMac G5 1.8GHz and PowerBook 15" 1.25GHz Mac OS X (10.4.4)
iMac G5 1.8GHz and PowerBook 15" 1.25GHz Mac OS X (10.4.4)
iMac G5 1.8GHz and PowerBook 15" 1.25GHz Mac OS X (10.4.4)

I tried that… what i did find out after working with it for over 8 hours today was... the image files were not brought over or converted correctly.
How did I find this out?
I created a new domain with the iWeb. so now there is two domains. I then copied page by page to create a new mirror of the old site. It worked in the old version... So I did this in the new current version after the update. Not all the images were copied when I copied the information. So this tells me that iWeb is not converting or working with the image file as it did in the previous version. I also noticed the part of the error is related to the navigation at the top of the pages. It did not convert properly. Different pages were slightly different in the navigation menu. I find this weird as each of my pages were exactly the same before the conversion. Some of the images had place holders.. not the image.
When I created a website from scratch, it would publish... so the problem is in the conversion process and what it does to the image file. This is what I can find as of today. i believe this is due to a complete change in file structure from on version to the other. I call this poor design. We have seen this already when tried to move other files when using iLife files… the designers of this program said you should not move files... if this is the case… then why create a program with a completely different file structure?
This is very poor.
So as of right now... the only way for me to use the new version of iWeb would be to copy and paste parts and pieces from the old pages to the new pages.

Error while running the form

Hi All,
I am using oracle 10g form builder.
I am able to connect to database.
But When running the form I am facing an error saying TNS protocol adapter error.
Can you please resolve it.
Thanks
Sunil
Edited by: user9092293 on Sep 14, 2010 10:39 PM

Sarah,
At runtime the Windows Registry is generally not used. In Forms versions newer than 902 most environment settings are captured from default.env. Also, adding "LOCAL" simply gives you the ability to offer a default value which won't be displayed in the login dialog (or login string). This may not always be desired behavior. Essentially, this is just a cheat. It doesn't necessarily solve the problem, but instead just works around it.
Sunil,
Although what Sarah is suggesting might solve your issue, it might not result in the desired behavior. I would recommend you first isolate and correct the problem before implementing shortcuts. In your case, the error you are seeing is often (but not always) the result of not including the connect string (db name/alias) when trying to connect or the inability to locate tnsnames.ora. So, proving this first will offer at least two thing: 1) It will help you to understand how the logon process works... 2) It illustrates what caused the problem in the first place, which may be helpful knowledge if you see this problem in the future.
Recommendation:
1. Can you connect the Builder to the db? In other words, open the Builder and from the menu select File > Connect. Enter your username, password, and Database name
2. If you can connect from within the Builder, while still connected, open your form in the Builder and click on the Run Form button found on the Builders menu/toolbar. Your form should run. If the same error appears then the problem is not related to the inclusion of the db name, as the Builder would have passed that information when the Run Form button was pressed. In this case, it suggests that the tnsnames.ora file cannot be found by the Runtime. If this is what you are seeing, refer back to my previous entry regarding updating your default.env with TNS_ADMIN.

Publishing Error - Weblog is the problem

Similar Messages

Maybe you are looking for